Engineering Commons^™

The Role Of Extracellular Polymeric Substances In The Accumulation And Transport Of Polystyrene Nanoparticles In Biofilms, Joann Marie Rodríguez Suarez

Doctoral Dissertations

With the increasing number of nanotechnology applications, it is reasonable to expect nanoparticles to be ubiquitous in biofilms found in natural and engineered aquatic systems. We studied the impact of the degree of cross-linking on the deposition and diffusion of polystyrene nanoparticles (NPs) in alginate model biofilm matrices in the presence and absence of calcium cross-linkers using image correlation methods and single particle tracking. We found that cross-linking increases the viscoelasticity and hydration of the polymeric matrix and leads to structural changes that can restrict and alter the diffusive behavior of NPs, but the magnitude of the effects on diffusion …

Investigation On Nanoparticle Based Combination Therapy For Targeted Cancer Treatment, Muhammad Raisul Abedin

Doctoral Dissertations

“The current treatment methods in cancer are associated with toxicity in healthy tissues, partial therapeutic response, drug resistance and finally recurrence of the disease. The cancer drugs are challenged by non-specific binding, undesired toxicity in healthy cells, low therapeutic index and finally poor therapeutic outcome. In this work, a targeted nanoscale therapeutic system Antibody Drug Nanoparticle (ADN) was engineered to selectively inhibit the breast cancer cell growth with reduced toxicity in healthy cells. The ADNs were designed by synthesizing rod shaped anoparticles using pure chemotherapeutic drug and covalently conjugating a therapeutic monoclonal antibody (mAb) on the surface of the drug …

Using Strontium Coated Clay Nanoparticles For Bone Regeneration And Other Biomedical Applications, Anusha Elumalai

Doctoral Dissertations

The aim of this project is to coat halloysite nanotubes (HNTs) with strontium in an ecofriendly, simple, and non-expensive process. These particles, when doped in calcium phosphate cements (CPC), are predicted to increase the osteoconductive and antibacterial properties of three dimensional (3D) printed bone scaffolds.

The purpose of the 3D printed bone scaffolds is to assume the same function as the bones they are replacing but with several additional functionalities. These biomaterials will have the ability to be resorbed as new bone is formed. Due to inherent osteogenic factors and antibiotics released from doped HNTs during the reparative process, it …

Increasing The Functionality Of Additive Manufacturing Through Atmospheric Microplasma And Nanotechnology, Alexander Jon Ulrich

Doctoral Dissertations

Additive Manufacturing (AM) has been changing the manufacturing landscape for the last 20 years. As the interest and demand for both polymer and metal-based 3D printing has grown, the materials and machines used have increased in capabilities. Despite the growth and advancement, there are still a large number of improvements that can be made to add functionality to 3D printers. Metal AM, a subcategory of 3D printing, has garnered much attention among industrial applications with large companies such as General Electric trying to implement the technology to increase innovative designs for motors. Some of the limitations on AM have to …

Scaleable Nanomanufacturing Of Metasurfaces Using Microsphere Photolithography, Chuang Qu

Doctoral Dissertations

“The cost-effective manufacturing of metasurfaces over large areas is a critical issue that limits their implementations. Microsphere photolithography (MPL) uses a scalable self-assembled microsphere array as an optical element to focus collimated light to nanoscale photonic jets in a photoresist layer. This dissertation investigates the fabrication capabilities, process control, and potential applications of MPL. First, the MPL concept is applied to the fabrication of metasurfaces with engineered IR absorption (e.g. perfect absorption with multiband/broadband and wavelength/polarization dependences). Improving the patterning of the photoresist requires a fundamental understanding the photochemical photonic jet interactions. The dissertation presents a model of the MPL …

Protein-Nanoparticle Co-Engineering: Self-Assembly, Intracellular Protein Delivery, And Crispr/Cas9-Based Gene Editing, Rubul Mout

Doctoral Dissertations

Direct cytoplasmic delivery of gene editing nucleases such CRISPR/Cas9 systems and therapeutic proteins provides enormous opportunities in curing human genetic diseases, and assist research in basic cell biology. One approach to attain such a goal is through engineering nanotechnological tools to mimic naturally existing intra- and extracellular protein delivery/transport systems. Nature builds transport systems for proteins and other biomolecules through evolution-derived sophisticated molecular engineering. Inspired by such natural assemblies, I employed molecular engineering approaches to fabricate self-assembled nanostructures to use as intracellular protein delivery tools. Briefly, proteins and gold nanoparticles were co-engineered to carry complementary electrostatic recognition elements. When these …

Advanced Purification And Direct-Write 3d Nanoprinting Via Focused Electron Beam Induced Deposition, Brett Bloxton Lewis

Doctoral Dissertations

This dissertation addresses three difficulties with focused electron beam induced deposition preventing broader application; purity, spatial control, and mechanical characterization.

Focused electron beam induced deposition (FEBID) has many advantages as a nanoscale fabrication tool. It is compatible for implementation into current lithographic techniques and has the potential to direct-write in a single step nanostructures of a high degree of complexity. FEBID is a very versatile tool capable of fabricating structures of many different compositions ranging from insulating oxides to conducting metals.

Due to the complexity of the technique and the difficulty in directly measuring many important variables, FEBID has remained …

Terahertz Radiation From Electrically Driven Graphene, Single Walled Carbon Nanotubes, And Platinum Nanostructures, Martin M. Muthee

Doctoral Dissertations

Terahertz power generation continues to be a subject of great interest owing mainly to the sparsity and diversity of sources. Though there has been remarkable development in sources, ranging from quantum cascade lasers, time domain spectroscopy systems and multiplier sources, there still exists hurdles when it comes to integration and application. While some sources excel in a particular attribute like power, they are severely limited when it comes to on-chip or system integration, for example. Furthermore, tunable bandwidth and power are inversely related. Electrically driven radiation sources are emergent and this thesis presents work in terahertz generation from arrays of …

Study Of The Self-Assembly Process Of Microporous Materials Using Molecular Modeling, Mohammad Navaid Khan

Doctoral Dissertations

Zeolites are an important class of materials in modern technology with applications in catalysis, separations, biosensing and microelectronics. There are over 200 different zeolite frameworks reported in literature, but only a handful have been used commercially. Understanding their self-assembly process would assist in the fabrication of new zeolites through the control of their pore size/shape, and surface area for advanced applications. With our research we aim to elucidate aspects of zeolite formation using molecular simulations. We have extended the lattice model of silica tetrahedra developed by Jin et al. [L. Jin, S. M. Auerbach and P. A. Monson J. Chem. …

Potential Applications For Halloysite Nanotubes Based Drug Delivery Systems, Lin Sun

Doctoral Dissertations

Drug delivery refers to approaches, formulations, technologies, and systems for transporting a drug in the body. The purpose is to enhance the drug efficacy and to reduce side reactions, which can significantly improve treatment outcomes. Halloysite is a naturally occurred alumino-silicate clay with a tubular structure. It is a biocompatible material with a big surface area which can be used for attachment of targeted molecules. Besides, loaded molecules can present a sustained release manner in solution. These properties make halloysite nanotubes (HNTs) a good option for drug delivery.

In this study, a drug delivery system was built based on halloysite …

Clay Nanotube Composites For Antibacterial Nanostructured Coatings, Christen J. Boyer

Doctoral Dissertations

A surging demand for the development of new antimicrobial nanomaterials exists due to the frequency of medical device-associated infections and the transfer of pathogens from highly touched objects. Naturally occurring halloysite clay nanotubes (HNTs) have shown to be ideal particles for polymer reinforcement, time-release drug delivery, nano-reactor synthesis, and as substrate material for nanostructured coatings.

This research demonstrates the feasibility of a novel method for coating HNTs with metals for antibacterial applications. The first ever ability to coat HNTs through electrolysis was developed for customizable and multi-functional antibacterial nanoparticle platforms. HNTs were investigated as substrate for the deposition of copper …

Refractive Index Engineering And Optical Properties Enhancement By Polymer Nanocomposites, Cheng Li

Doctoral Dissertations

The major part of this dissertation discusses the engineering of the refractive index of materials using solution-processable polymer nanocomposites and their applications in building optical components and devices. Three particular polymer nanocomposites have been introduced to achieve materials with tunable refractive indices and enhanced optical properties, which can be used to manipulate the behavior of light or electromagnetic radiations. In the first system, polyhedral oligomeric silsesquioxane (POSS)/polymer nanocomposites are developed. Thin films with tunable, low refractive indicies were fabricated from the composites. The mechanical strength of these films was characterized, and their application in antireflective coatings is discussed. In the …

Physically Equivalent Intelligent Systems For Reasoning Under Uncertainty At Nanoscale, Santosh Khasanvis

Doctoral Dissertations

Machines today lack the inherent ability to reason and make decisions, or operate in the presence of uncertainty. Machine-learning methods such as Bayesian Networks (BNs) are widely acknowledged for their ability to uncover relationships and generate causal models for complex interactions. However, their massive computational requirement, when implemented on conventional computers, hinders their usefulness in many critical problem areas e.g., genetic basis of diseases, macro finance, text classification, environment monitoring, etc. We propose a new non-von Neumann technology framework purposefully architected across all layers for solving these problems efficiently through physical equivalence, enabled by emerging nanotechnology. The architecture builds …

Computational Study Of Sodium Magnesium Hydride For Hydrogen Storage Applications, Fernando Antonio Soto Valle

Doctoral Dissertations

Hydrogen offers considerable potential benefits as an energy carrier. However, safe and convenient storage of hydrogen is one of the biggest challenges to be resolved in the near future. Sodium magnesium hydride (NaMgH 3) has attracted attention as a hydrogen storage material due to its light weight and high volumetric hydrogen density of 88 kg/m3. Despite the advantages, hydrogen release in this material occurs at approximately 670 K, which is well above the operable range for on-board hydrogen storage applications. In this regard, hydrogen release may be facilitated by substitution doping of transition-metals. This dissertation describes first-principles computational methods that …

Towards Sustainable Development Of Nanomanufacturing, Sasikumar Ramdas Naidu

Doctoral Dissertations

"Sustainability" is a buzz word these days not just among regulatory agencies but even with corporations, as evident by the release of annual sustainability report by a large number of firms. Companies are starting to portray profit making along with corporate environmental responsibility.

Nanotechnology and nanomanufacturing which holds a lot of promise for development in a multitude of fields in science and engineering is the new kid on the block and carries a lot of apprehension due to public concern about their potential unwanted side effects that may result in the case of an untoward incident or lack of oversight. …

Study Of Interaction Between Indium Species And Dna In The Formation Of Dna -Templated Nanowires, Shivashankar Suryanarayanan

Doctoral Dissertations

A primary goal of semiconductor industry is to improve device performance and capability by downscaling feature size and upscaling packaging density. As optical-lithography, the mainstream technology for microfabrication, is being stretched to its limit, new unconventional fabrication techniques are being explored as alternatives. A "Bottom-up" approach for manufacturing is emerging as an answer to limitations posed by the traditional "Top-down" approach. Nanowires, bearing the potential of being the basic building blocks for such an approach, are gaining tremendous attention in nanoelectronics. Metal nanowires fabricated using DNA as templates have potential for precise control of length, diameter and positioning. However, wires …