Engineering Commons^™

Configuration, Programming, Implementation, And Evaluation Of Distributed Control System For A Process Simulator, Ximing Liu

Electronic Thesis and Dissertation Repository

Abstract

A common industrial distributed control system (DCS), DeltaV, is configured and programmed to control and monitor the Nuclear Process Control Test Facility (NPCTF). A cabinet which holds the hardware of the DelatV DCS system, including programmable logic controller (PLC), power supplies, input/output (I/O) cards, terminals, and relays are configured and wired to field devices of NPCTF. A workstation and HMI screen are configured and setup.

To implement the main functions of NPCTF in the DelatV system, the programming architecture is designed in the DelatV system. The main control and monitoring functions of NPCTF are programmed using industrial languages of …

Methods And Systems For Fault Diagnosis In Nuclear Power Plants, Jianping Ma

Electronic Thesis and Dissertation Repository

This research mainly deals with fault diagnosis in nuclear power plants (NPP), based on a framework that integrates contributions from fault scope identification, optimal sensor placement, sensor validation, equipment condition monitoring, and diagnostic reasoning based on pattern analysis. The research has a particular focus on applications where data collected from the existing SCADA (supervisory, control, and data acquisition) system is not sufficient for the fault diagnosis system. Specifically, the following methods and systems are developed.

A sensor placement model is developed to guide optimal placement of sensors in NPPs. The model includes 1) a method to extract a quantitative fault-sensor …

Helical Pile Installation Torque And Capacity Correlations, Jared Louis Harnish

Electronic Thesis and Dissertation Repository

Large diameter helical piles are being utilized increasingly to support large compressive and tensile loads. Both the magnitude of the required installation torque and the pile capacity can be directly attributed to the soil shearing resistance developed over the embedded area of the pile including the shaft and helical plates. Hence, the pile capacity can be correlated to the installation torque. Such correlations are widely used in helical pile industry as a means for quality control/quality assurance. However, the reliability of capacity-torque correlations for predicting the large diameter helical piles is adversely affected by the inaccurate measurement of the installation …

A Systematic Review Of The Critical Factors For Success Of Mobile Learning In Higher Education (University Students' Perspective), Muasaad Alrasheedi, Luiz Fernando Capretz, Arif Raza

Electrical and Computer Engineering Publications

The phenomenon of the use of a mobile learning (m-Learning) platform in educational institutions is slowly gaining momentum. However, the enthusiasm with which mobile phones have been welcomed into every aspect of our lives is not yet apparent in the educational sector. To understand the reason, it is important to understand user expectations of the system. This article documents a systematic review of existing studies to find the success factors for effective m-Learning. Our systematic review collates results from 30 studies conducted in 17 countries, where 13 critical success factors were found to strongly impact m-Learning implementation. Using these results …

Static And Dynamic Response Of Silty Toyoura Sand With Pva Fibre And Cement Additives, Colin J.R. Schmidt

Electronic Thesis and Dissertation Repository

After the Great East Japan Earthquake of 2011, nearly 24 million tons of disaster debris such as concrete products, natural and polymeric fibres, and tsunami deposits remained on the coast of Japan. Much of this debris was recycled and repurposed in engineering projects such as embankments, park restoration, and agricultural field restoration around Tokyo Bay, one of the hardest hit regions of the country. Such a major disaster developed a need for the stabilization of the liquefaction susceptible regions of the reclaimed Tokyo Bay coastline. This thesis specifically focuses on the stabilization against liquefaction of Toyoura sand with the typical …

Engineering Periodontal Tissue Regeneration With The Use Of A Novel Periostin Electrospun Scaffold, Kendal I. Creber

Electronic Thesis and Dissertation Repository

Clinical therapies for the treatment of periodontitis are unable to reproducibly stimulate regeneration of the periodontium. We assessed the use of a novel electrospun type I collagen scaffold containing recombinant periostin to stimulate regeneration of the periodontal ligament (PDL) and bone. Human PDL cells demonstrated the ability to form a mineralized matrix in vitro and reduced osteogenic potential with increased donor age. In vitro analysis indicated scaffolds were biocompatible, however, periostin did not significantly influence adhesion or growth. In the healing of fenestration defects in rats, type I collagen scaffolds (with and without periostin) initially delayed cell infiltration and increased …

The Study Of Mixing And Initial Granule Formation During High Shear Granulation Of Pharmaceutical Powders, Aveen Alkhatib

Electronic Thesis and Dissertation Repository

Wet granulation is the agglomeration of particles using a liquid binder to form granules. The process is extensively used in the pharmaceutical industry to manufacture tablets, as granulation minimizes segregation, dust, and improves flowability. Granule uniformity is important in pharmaceutical manufacturing, as the tablet must contain a uniform distribution of excipients in the product in order to comply with United States Food and Drug Administration (FDA) regulations. The research presented in this thesis focuses on the influence of formulation and process parameters on granule formation. Sugar spheres were initially used to study segregation during the dry mixing phase of high …

Characterization Of High-Pressure-Die-Cast Magnesium Alloy Am60, Hooman Baghaei Anaraki

Electronic Thesis and Dissertation Repository

The primary goal of this study is the characterization of high pressure die cast magnesium alloys AM60 so that the failure model which is proposed by J.Weiler can be validated for two new castings. The input variables of failure model can be determined by characterization of different regions within the castings. Based on the location of gate system, the desired regions are identified across both castings and tensile specimens are extracted from various regions. Therefore the local mechanical properties are determined, and fracture strain of samples ranges from 1.2 to 9.5%. The area fraction of porosities and skin fraction of …

Rotor Position Identification For Brushless Dc Motor, Muhammad Ikhlas

Electronic Thesis and Dissertation Repository

Permanent magnet BLDC motors are characterized by a central magnetic core, called the rotor, and fixed electric coils (usually six) equally spaced in a ring around the core, called the stator. Motor movement is controlled by alternately energizing and de-energizing the stator coils to create a rotating magnetic field that propels the rotor. In order for this process to work correctly, BLDC motors required a technology called electronic commutation, in which the coil currents must be very carefully synchronized to rotor position to ensure that the rotating field is correctly aligned with the permanent magnetic field in the rotor. Usually …

An Empirical Study Of Critical Success Factors Of Mobile Learning Platform From The Perspective Of Instructors, Muasaad Alrasheedi, Luiz Fernando Capretz

Electrical and Computer Engineering Publications

Mobile learning is newest learning platform and based on the rapid rate of proliferation of mobile technology throughout the world is expected to grow at a rapid rate. However, the adoption of m-Learning is proceeding at a cautious rate. This mismatch in the rate of growth of the technology itself and the use of the technology in learning is a subject of extensive interest to researchers. However, research in the area has been mostly focused on understanding the success factors of the platform from learners’ perspective. In this research, we have conducted an extensive analysis of the extent to which …

Thermal Convection In Non-Fourier Fluids And Application To Liquid Helium Ii, Mohammad Niknami Esfahani

Electronic Thesis and Dissertation Repository

This thesis examines different conditions for which non-Fourier effects can be significant in the flow of fluids. Non-Fourier fluids of dual-phase-lagging type (DPL) possess a relaxation time and a retardation time, reflecting the delay in the response of the heat flux and the temperature gradient with respect to one another. For non-Fourier fluids of single-phase-lagging type (SPL) the retardation time is zero. Non-Fourier fluids span a wide range of applications, including liquid helium, nanofluids and rarefied gases. The parallels between non-Fourier fluids and polymeric solutions are established.

The instability of steady natural convection of a thin layer of non-Fourier fluid …

Development And Study Of Measurement Methods For Jets And Bogging In A Fluidized Bed, Majid Hamidi

Electronic Thesis and Dissertation Repository

In the Fluid Coking process, if the local concentration of liquid is very high, particles may stick together which can eventually result in process upset because of poor fluidization or even defluidization, a condition commonly known in industry as "bogging".

Using a capacitance sensor, the void distribution in a bed of coke particles can be visualized. The voidage fluctuations caused by gas bubbles have been shown to change dramatically as the bed becomes bogged. Therefore, capacitance sensors should be able to predict the bogging condition in fluid cokers.

The first part of the thesis focused on designing noiseless capacitance sensors …

Cluster Fluid Dynamics In Down Flow Reactors: Experimental And Modeling Study, Angel Virgilio Lanza Soto

Electronic Thesis and Dissertation Repository

Gas–solid concurrent downers possess unique features when compared to other gas–solid systems. Establishing their fluid dynamic properties requires both experimental measurements of gas-solid flow properties and computational modeling.

Measuring gas-solid flow properties such as cluster solid concentrations, individual cluster slip velocities, and cluster sizes, involves the use of specialized optical equipment, as well as a rigorous data analysis methodology. In addition, the modeling of the fluid dynamics of gas-solid flows in downer units offers special challenges such as establishing a proper drag model, cluster configuration and sizes, sphericity, boundary conditions, among other issues.

In this PhD dissertation, the fluid dynamics …

Thermal Conversion Of Triglycerides Of Vegetable Oil For Production Of Renewable Lamp Fuel, Jamie A. Gregory

Electronic Thesis and Dissertation Repository

The thermal treatment of crop oils was investigated with the aim to produce a renewable, liquid fuel suitable for use in wick-based lighting systems. Specific objectives include reducing fuel viscosity and improving wickability in traditional flat cotton wicks. Pyrolysis and visbreaking processes were the two methods of thermal treatment that were studied. Visbreaking was a semi-batch process carried out in a stirred tank reactor at temperatures ranging from 300 to 500 °C. Pyrolysis utilized a continuous system with a mechanically fluidized bed reactor at temperatures ranging from 400- 650 °C. Initial testing with soybean oil feedstock demonstrated that pyrolysis was …

A Self-Potential For Monitoring Self-Sustaining Treatment For Active Remediation (Star), Mehrnoosh Ebrahimzadeh

Electronic Thesis and Dissertation Repository

Self-sustaining Treatment for Active Remediation (STAR) is a novel soil remediation approach for Non-Aqueous Phase liquids (NAPLs) embedded in a porous medium. STAR is based on liquid smoldering combustion which destroys NAPLs while simultaneously generating heat due to the exothermic oxidation reaction. The technique is currently in use in several field pilot tests and a full-scale site remediation. Propagation of the smoldering front is monitored in the field by temperature data obtained from a thermocouple network, with limited resolution. Geophysical techniques, such as Self-Potential (SP), have potential as a non-destructive means for monitoring remediation processes. The SP method measures natural …

Resting-State Functional Network Disruptions In A Rodent Model Of Mesial Temporal Lobe Epilepsy (Tle), Ravnoor Singh Gill

Electronic Thesis and Dissertation Repository

Mesial temporal lobe epilepsy (TLE) is the most common form of drug-refractory epilepsy. The clinical application of non-invasively mapped networks using resting-state functional magnetic resonance imaging (rsfMRI) in humans has been rather limited due to heterogeneous (varying etiology, drugs, onset, latent period, etc.) patient groups. We employed a pharmacological (kainic acid) rodent model of TLE to measure the extent of functional network disruptions using rsfMRI, and study selected behaviors and olfactory to hippocampus transmission. Graph theoretical network modelling and analysis revealed significant increase in functional connectivity connectivity to the temporal lobe (hippocampus) in epileptic-rats compared to controls in the limbic …

Collaborative Knowledge As A Service Applied To The Disaster Management Domain, Katarina Grolinger, Emna Mezghani, Miriam Am Capretz, Ernesto Exposito

Electrical and Computer Engineering Publications

Cloud computing offers services which promise to meet continuously increasing computing demands by using a large number of networked resources. However, data heterogeneity remains a major hurdle for data interoperability and data integration. In this context, a Knowledge as a Service (KaaS) approach has been proposed with the aim of generating knowledge from heterogeneous data and making it available as a service. In this paper, a Collaborative Knowledge as a Service (CKaaS) architecture is proposed, with the objective of satisfying consumer knowledge needs by integrating disparate cloud knowledge through collaboration among distributed KaaS entities. The NIST cloud computing reference architecture …

A Generalized Service Replication Process In Distributed Environments, Hany F. Elyamany, Marwa F. Mohamed, Katarina Grolinger, Miriam Am Capretz

Electrical and Computer Engineering Publications

Replication is one of the main techniques aiming to improve Web services’ (WS) quality of service (QoS) in distributed environments, including clouds and mobile devices. Service replication is a way of improving WS performance and availability by creating several copies or replicas of Web services which work in parallel or sequentially under defined circumstances. In this paper, a generalized replication process for distributed environments is discussed based on established replication studies. The generalized replication process consists of three main steps: sensing the environment characteristics, determining the replication strategy, and implementing the selected replication strategy. To demonstrate application of the generalized …

Energy Cost Forecasting For Event Venues, Katarina Grolinger, Andrea Zagar, Miriam Am Capretz, Luke Seewald

Electrical and Computer Engineering Publications

Electricity price, consumption, and demand forecasting has been a topic of research interest for a long time. The proliferation of smart meters has created new opportunities in energy prediction. This paper investigates energy cost forecasting in the context of entertainment event-organizing venues, which poses significant difficulty due to fluctuations in energy demand and wholesale electricity prices. The objective is to predict the overall cost of energy consumed during an entertainment event. Predictions are carried out separately for each event category and feature selection is used to select the most effective combination of event attributes for each category. Three machine learning …

A New Approach To Digital Generation Of Spherical Void Phase Porous Media Microstructures, Nolan J. Dyck, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

Magnetic Resonance Imaging And Histology Correlation In The Neocortex In Temporal Lobe Epilepsy., Maged Goubran, Robert R Hammond, Sandrine De Ribaupierre, Jorge G Burneo, Seyed Mirsattari, David A Steven, Andrew G Parrent, Terry M Peters, Ali R Khan

Robarts Imaging Publications

OBJECTIVE: To investigate the histopathological correlates of quantitative relaxometry and diffusion tensor imaging (DTI) and to determine their efficacy in epileptogenic lesion detection for preoperative evaluation of focal epilepsy.

METHODS: We correlated quantitative relaxometry and DTI with histological features of neuronal density and morphology in 55 regions of the temporal lobe neocortex, selected from 13 patients who underwent epilepsy surgery. We made use of a validated nonrigid image registration protocol to obtain accurate correspondences between in vivo magnetic resonance imaging and histology images.

RESULTS: We found T1 to be a predictor of neuronal density in the neocortical gray matter (GM) …

Registration Of In-Vivo To Ex-Vivo Mri Of Surgically Resected Specimens: A Pipeline For Histology To In-Vivo Registration., Maged Goubran, Sandrine De Ribaupierre, Robert R Hammond, Catherine Currie, Jorge G Burneo, Andrew G Parrent, Terry M Peters, Ali R Khan

Robarts Imaging Publications

BACKGROUND: Advances in MRI have the potential to improve surgical treatment of epilepsy through improved identification and delineation of lesions. However, validation is currently needed to investigate histopathological correlates of these new imaging techniques. The purpose of this work is to develop and evaluate a protocol for deformable image registration of in-vivo to ex-vivo resected brain specimen MRI. This protocol, in conjunction with our previous work on ex-vivo to histology registration, completes a registration pipeline for histology to in-vivo MRI, enabling voxel-based validation of novel and existing MRI techniques with histopathology.

NEW METHOD: A combination of image-based and landmark-based 3D …

In Vivo Mri Signatures Of Hippocampal Subfield Pathology In Intractable Epilepsy., Maged Goubran, Boris C Bernhardt, Diego Cantor-Rivera, Jonathan C Lau, Charlotte Blinston, Robert R Hammond, Sandrine De Ribaupierre, Jorge G Burneo, Seyed M Mirsattari, David A Steven, Andrew G Parrent, Andrea Bernasconi, Neda Bernasconi, Terry M Peters, Ali R Khan

Robarts Imaging Publications

OBJECTIVES: Our aim is to assess the subfield-specific histopathological correlates of hippocampal volume and intensity changes (T1, T2) as well as diff!usion MRI markers in TLE, and investigate the efficacy of quantitative MRI measures in predicting histopathology in vivo.

EXPERIMENTAL DESIGN: We correlated in vivo volumetry, T2 signal, quantitative T1 mapping, as well as diffusion MRI parameters with histological features of hippocampal sclerosis in a subfield-specific manner. We made use of on an advanced co-registration pipeline that provided a seamless integration of preoperative 3 T MRI with postoperative histopathological data, on which metrics of cell loss and gliosis were quantitatively …

Shear Capacity Of Rc Beams At Elevated Temperatures, Maged A. Youssef, Mohamed Diab, Salah El-Din F. El-Fitiany

Civil and Environmental Engineering Publications

Fire safety is a critical criterion for designing reinforced concrete structures. With the introduction of performance-based design, structural engineers need design tools to assess the capacity of different elements during fire exposure. This paper proposes an analytical method to predict the shear capacity of reinforced concrete beams exposed to elevated temperatures. The proposed method extends the use of existing ambient temperature methods by accounting for the effect of elevated temperatures on material properties. It involves heat transfer analysis, evaluation of the material properties at elevated temperatures, and application of the modified compression field theory to estimate the shear capacity. The …

Experimental Investigation Of The Composite Action Between Hollowcore Slabs With Machine Cast Finish And Concrete Topping, Aiham Adawi, Maged Youssef, Mohamed E. Meshaly

Civil and Environmental Engineering Publications

Hollowcore slabs are precast/prestressed concrete elements produced at a manufacturing plant before shipping to the job site. Following installation, a layer of concrete topping is usually cast to connect the slabs and to have a level surface. According to current North American design standards, the topping should not be considered to act compositely with the slabs except if their surface satisfies a strict roughness requirement. This paper evaluates if such restriction is justified for hollowcore slabs with machine-cast finish through an experimental program that involves pull-off, push-off and full-scale tests. The surface roughness was first evaluated. The peel (bond) and …

Analytical Modeling Of The Interface Between Lightly Roughened Hollowcore Slabs And Cast-In-Place Concrete Topping, Aiham Adawi, Maged A. Youssef, Mohamed E. Meshaly

Civil and Environmental Engineering Publications

Hollowcore slabs are commonly used in different types of structures. They are usually topped with a 50 mm concrete topping. Structural engineers can use this topping to increase the slab load carrying capacity. North American design standards relate the horizontal shear strength at the interface between hollowcore slabs and the concrete topping to the slab surface roughness. This paper presents results of four push-off tests on hollowcore slabs supplied by two manufacturers and roughened using a conventional steel broom. The tested slabs sustained higher horizontal shear stresses than those specified by the design standards. Utilizing the data from the push-off …

Seismic Capacity Of Reinforced Concrete Interior Flat Plate Connections, Maged A. Youssef, A O. Chowdhury, Mohamed E. Meshaly

Civil and Environmental Engineering Publications

The demand for modular steel buildings (MSBs) has increased because of the improved quality, fast on-site installation, and lower cost of construction. Steel braced frames are usually utilized to form the lateral load resisting system of MSBs. During earthquakes, the seismic energy is dissipated through yielding of the components of the braced frames, which results in residual drifts. Excessive residual drifts complicate the repair of damaged structures or render them irreparable. Researchers have investigated the use of superelastic shape memory alloys (SMAs) in steel structures to reduce the seismic residual deformations. This study explores the potential of using SMA braces …