Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 5 of 5
Full-Text Articles in Engineering
Experimental Investigation Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma, Josh Wall
Experimental Investigation Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma, Josh Wall
Faculty of Engineering and Information Sciences - Papers: Part A
This paper presents the experimental investigation of a novel solar assisted HVAC system developed for the Team UOW Solar Decathlon house, the overall winner of the Solar Decathlon China 2013 competition. This novel HVAC system consists of an air based photovoltaic-thermal (PVT) system and a phase change material (PCM) thermal storage unit integrated with a ducted system with a reverse-cycle heat pump. The system has been designed for operation during both winter and summer, using daytime solar radiation and night sky radiative cooling to increase the energy efficiency of the air-conditioning system. The PVT system can exchange heat with the …
A Combined Experimental-Numerical Approach For Determining Mechanical Properties Of Aluminum Subjects To Nanoindentation, Mao Liu, Cheng Lu, A Kiet Tieu, Ching-Tun Peng, Charlie Kong
A Combined Experimental-Numerical Approach For Determining Mechanical Properties Of Aluminum Subjects To Nanoindentation, Mao Liu, Cheng Lu, A Kiet Tieu, Ching-Tun Peng, Charlie Kong
Faculty of Engineering and Information Sciences - Papers: Part A
A crystal plasticity finite element method (CPFEM) model has been developed to investigate the mechanical properties and micro-texture evolution of single-crystal aluminum induced by a sharp Berkovich indenter. The load-displacement curves, pile-up patterns and lattice rotation angles from simulation are consistent with the experimental results. The pile-up phenomenon and lattice rotation have been discussed based on the theory of crystal plasticity. In addition, a polycrystal tensile CPFEM model has been established to explore the relationship between indentation hardness and yield stress. The elastic constraint factor C is slightly larger than conventional value 3 due to the strain hardening.
Experimental And Numerical Study Of Micro Deep Drawing, Liang Luo, Zhengyi Jiang, Dongbin Wei, Kenichi Manabe, Hideki Sato
Experimental And Numerical Study Of Micro Deep Drawing, Liang Luo, Zhengyi Jiang, Dongbin Wei, Kenichi Manabe, Hideki Sato
Faculty of Engineering and Information Sciences - Papers: Part A
Micro forming is a key technology for an industrial miniaturisation trend, and micro deep drawing (MDD) is a typical micro forming method. It has great advantages comparing to other micro manufacturing methods, such as net forming ability, mass production potential, high product quality and complex 3D metal products fabrication capacity. Meanwhile, it is facing difficulties, for example the so-called size effects, once scaled down to micro scale. To investigate and to solve the problems in MDD, a combined micro blanking-drawing machine is employed and an explicit-implicit micro deep drawing model with a voronoi blank model is developed. Through heat treatment …
Novel Experimental Setup For Time-Of-Flight Mass Spectrometry Ion Detection In Collisions Of Anionic Species With Neutral Gas-Phase Molecular Targets, J C. Oller, L Ellis-Gibbings, F Ferreira Da Silva, Paulo Limao-Vieira, Gustavo Garcia
Novel Experimental Setup For Time-Of-Flight Mass Spectrometry Ion Detection In Collisions Of Anionic Species With Neutral Gas-Phase Molecular Targets, J C. Oller, L Ellis-Gibbings, F Ferreira Da Silva, Paulo Limao-Vieira, Gustavo Garcia
Faculty of Engineering and Information Sciences - Papers: Part A
We report a novel experimental setup for studying collision induced products resulting from the interaction of anionic beams with a neutral gas-phase molecular target. The precursor projectile was admitted into vacuum through a commercial pulsed valve, with the anionic beam produced in a hollow cathode discharge-induced plasma, and guided to the interaction region by a set of deflecting plates where it was made to interact with the target beam. Depending on the collision energy regime, negative and positive species can be formed in the collision region and ions were time-of-flight (TOF) mass-analysed. Here, we present data on O-2 precursor projectile, …
An Experimental And Numerical Study Of Micro Deep Drawing Of Sus304 Circular Cups, Liang Luo, Zhengyi Jiang, Dongbin Wei, Kenichi Manabe, Hideki Sato, Xiaofeng He, Pengfei Li
An Experimental And Numerical Study Of Micro Deep Drawing Of Sus304 Circular Cups, Liang Luo, Zhengyi Jiang, Dongbin Wei, Kenichi Manabe, Hideki Sato, Xiaofeng He, Pengfei Li
Faculty of Engineering and Information Sciences - Papers: Part B
Micro deep drawing is a promising technology for mass production of complex 3D micro metal products. Significant size effects at a micro scale, however, obstruct application of this technology and block utilisation of traditional finite element method (FEM). Therefore, a micro tensile test system was developed to obtain accurate material properties considering size effects. Subsequently, a Voronoi blank model was developed for the micro scale simulation. Moreover, micro deep drawing experiments were conducted and their results were compared with the simulation results. The simulation results have a good agreement with the experimental data. Furthermore, the wrinkling at the cup mouth …