Engineering Commons^™

Collaborative And Distributed Algorithms For Localization In Wireless Sensor Networks Based On The Solution Of Spatially Constrained Local And Sub-Local Problems, Juan De Dios Cota

Open Access Theses & Dissertations

In this research we present algorithms for the distributed and collaborative localization of nodes for applications in wireless sensor networks. The algorithms are distributed in the sense that each node can estimate its own position using only range information and position estimates from neighboring nodes. The algorithms aim at achieving good accuracy with low computational complexity and low energy consumption. We consider the full localization process consisting of an initialization stage followed by a refinement stage.

For initialization, we propose a \emph{bilateration} algorithm where each node uses a set of anchors and their respective ranges to solve a set of …

Analysis Of Endocrine Disrupting Compounds In Wastewater Treatment Plants: A Perspective Of Trans-Boundary Waterborne Pollution, Roberto De La Torre

Open Access Theses & Dissertations

Recent decades have brought an increasing concern of potential adverse human and ecological health effects resulting from Endocrine Disruptor Compounds (EDCs). In particular from new emerging compounds such as natural estrogens (e.g., 17©¬-estradiol, estrone), synthetic estrogens (e.g., 17Â¥á-ethynylestradiol), bisphenol A (BPA), nonylphenol ethoxylates (NPEOS), and nonylphenol (NP). These chemicals which are also known as organic wastewater contaminants are released directly to the environment after passing through wastewater treatment plants (WWTPs), which often are not designed to remove them from the effluent. The occurrence of the aforementioned compounds in surface water is becoming of increasing concern worldwide, and has led to …

Improved Joining Method For Segmental Prestressed Structures, Ralph Warren Jensen

Open Access Theses & Dissertations

This dissertation addresses the need for more robust and materially efficient structures, specifically structures that absorb higher levels of energy, can self-erect and which have variable reaction capabilities. These structures can take much higher levels of strain and loading compared to current technologies in reinforced concrete and carbon fiber composites. These structures are made using a novel method of joining segmental elements. A great advantage with this segmental structural system is it's survivability under overloaded conditions. During an impact, or concentrated pressure load, the structure will wrap around the impact zone thereby widely distributing the contact stresses. This function or …

Assessment Of Intra-Urban Traffic-Related Air Pollution On Asthmatic Children's Exposure At Schools In The Paso Del Norte Region, Amit Ugamraj Raysoni

Open Access Theses & Dissertations

Traffic-related air pollution can be a major public health concern in any urban area. This problem is compounded in the Paso del Norte region that has experienced rapid economic growth, and a substantial number of people living in close vicinity of major roadways. The desert surroundings, arid weather, frequent temperature inversions, heavy border traffic at the international ports of entry between El Paso and Ciudad Juárez, and poorly maintained vehicle fleet further exacerbates this problem. A growing body of air quality and epidemiologic research has discerned the linkage between traffic emissions and respiratory disorders.

Initial health investigations in the Paso …

Evaluation Methods For Health Monitoring Of Aerospace Structure Rotary Joints, Sergio Armando Navarro

Open Access Theses & Dissertations

In September 2007, the excessive vibrations played a significant role in the station operation since one of the rotary joints, which provides the station electrical energy, presented an anomaly. The replacement of its bearing components and re-lubrication were necessary to reduce the problem. To avoid a new anomaly, the inspection of the rotary joints performance continues by using the accelerometers data. This thesis presents three new approaches to monitor the vibrations at the International Space Station based on Root-Mean-Square, kurtosis, and Approximate Entropy (ApEn). MATLAB functions and codes were necessary to implement the three monitoring techniques results from the provided …

Mixed-Signal Distributed Feature Extraction For Classification Of Wide-Band Acoustic Signals On Sensor Networks, Humberto Santacruz

Open Access Theses & Dissertations

This thesis proposes a distributed/collaborative scheme for the classification of wide-band acoustic events within the context wireless sensor networks (WSNs). The proposed method is characterized by a mixed-signal processing scheme for the extraction of feature vectors which reduces the processing, memory allocation, and power requirements of the sensor nodes. The mixed-signal scheme assumes that nodes have an analog frontend consisting of a microphone, a bandpass filter, a squaring element and an integrator. This chain of components produces an estimate of the energy over the frequency subband extracted by the filter. The WSN has the ability to form a distributed filter …

An Evolutionary Approach Based On Viral Replication For Solving Combinatorial Optimization Problems, Claudia Evangelina Valles Sosa

Open Access Theses & Dissertations

A new multi-objective evolutionary algorithm that mimics the way viruses replicate is presented. The purpose of viral replication is to allow the reproduction and survival of its kind. The algorithm is able to produce a large number of solutions to be evaluated by imitating the way viral replication and the infection process work. The well-known multi-objective redundancy allocation problem is used to show the performance of this new viral-based evolutionary approach. The algorithm considers the maximization of system reliability, the minimization of system cost, and the minimization of system weight to be optimized simultaneously. The solution to the multi-objective optimization …

Fabrication And Characterization Of Nanocrystalline Yttrium Oxide Thin Films For Electronic Device Applications, Mudavakkat Vikas Haridas

Open Access Theses & Dissertations

This thesis presents the optimization of growth conditions for fabricating nanocrystalline Yttrium Oxide (Y2O3) thin films on silicon and optical grade, high quality quartz substrates in order to study its structural, optical and electrical properties for electronic device applications.

Commercially Y2O3 has proven to be difficult to fabricate at high quality due to its high temperature growth requirements and the need to alter established fabrication methods for electronic devices. A high temperature requirement for high quality poses a problem for research and analysis. This calls upon for an optimization of the growth conditions to facilitate fabrication of thin films for …

Experimental And Numerical Investigation Of The Effect Of Fuel Composition On Flame Stability On A Gas Turbine Combustor, Gilberto Corona

Open Access Theses & Dissertations

Gas turbines are used for power generation and aviation all over the world. Fossil fuels remain the main source of energy for the operation of gas turbines but the recent increase in environmental awareness has influenced government agencies to impose stringent limits on pollutant emissions from power generation plants. Pollutant emissions control is one of the major challenges for gas turbine designers. In this study, experimental methods and computational fluid dynamics (CFD) technologies are used to study the problems that arise when coal derived fuels are used in Gas Turbine Combustors.

Gas turbine designers need both experimental data and combustion …

Spatio-Temporal Cardiac Pacing Sites Localization And Time Varying Pericardium Potential Maps Projection Using Ecg Precordial Leads And A Single Moving Dipole Model, Jaime R. De La Cruz

Open Access Theses & Dissertations

A novel non-invasive method for the spatiotemporal localization of the sites of strongest cardiac activity, and for the creation of time varying Pericardium Potential Maps (PPM), with the use of patients' ECG precordial leads, is proposed in this Thesis study. Compared to previous studies, which analyze electrocardiograms in either time domain or spatial domain, the proposed method has the advantage of a simultaneous spatiotemporal electrocardiograph analysis and a 3-D visualization of pericardium potentials maps, as well as, the pericardium surface polarization patterns during the cardiac cycle. The spatial properties added to the electrocardiogram allow for the analysis of specific regions …

Assessment And Evaluation Of Peripheral Neuropathy From Diabetic Mellitus Using Systems Analysis Approach, Oscar Alonso Espino

Open Access Theses & Dissertations

Currently in America 1 out of every 10 residents suffers from diabetes, and this tendency is likely to grow up to "1 of every 3" by the year [6]. Diabetes exhibits several complications. In 2005, the lead cause of stroke and heart disease was diabetes, 68% of the cases [1]. In 2008, 44% of kidney failure was associated with diabetes [1]. 60 to 70 % of cases of diabetes have a mild to severe nervous system damage [1]. Diabetic patients who have developed peripheral neuropathy tend to also develop foot ulceration. In an advanced stage a foot ulcer can lead …

Fundamental Studies Of Co-Base Superalloy Biomedical Prototypes Fabricated By Electron Beam Melting: Microstructures And Microstructural Architecture, Sara M. Gaytan

Open Access Theses & Dissertations

Rapid prototyping, especially electron beam melting (EBM) technology by ARCAM have proven to provide outstanding microstructural and mechanical properties on different alloys fabricated by this technology. Being a computer designed driven technology, complex components, that are hard or even impossible to fabricate by traditional manufacturing techniques, can be fabricated by layer-by-layer EBM technology.

Microstructural and mechanical properties are compared for an EBM femoral knee component prototype with a traditionally-fabricated and body-removed femoral knee implant. Block and cylindrical shape components fabricated by EBM were also analyzed for this project. The alloy utilized for these components is Co-26Cr-6Mo-0.2C characterized by the standards …

The Effect Of Mmod Porosity On Crater Depth After Hypervelocity Impact, David Ledesma

Open Access Theses & Dissertations

A significant amount of research has been conducted in the last decades on the design of spacecraft shielding for the impacts of Micro Meteoroid and Orbital Debris (MMOD). Through the use of hydrocodes, empirical data, and physical testing, researchers have been successful in studying a wide range of shielding configurations. However, a very limited amount of research has been conducted to understand the effect that the porosity and irregular shape of MMOD has on the damage they create on spacecraft components.

The work presented in this thesis addresses the modeling of MMDO porosity by using the CTH hydrocode to investigate …

Algorithms For Training Large-Scale Linear Programming Support Vector Regression And Classification, Pablo Rivas Perea

Open Access Theses & Dissertations

The main contribution of this dissertation is the development of a method to train a Support Vector Regression (SVR) model for the large-scale case where the number of training samples supersedes the computational resources. The proposed scheme consists of posing the SVR problem entirely as a Linear Programming (LP) problem and on the development of a sequential optimization method based on variables decomposition, constraints decomposition, and the use of primal-dual interior point methods. Experimental results demonstrate that the proposed approach has comparable performance with other SV-based classifiers. Particularly, experiments demonstrate that as the problem size increases, the sparser the solution …

An Investigation Into The Effect Of Blood Glucose Level Changes On Lf/Hf Parameter Of Hrv Signal In Non-Diabetic And Diabetic Individuals, Reza M. Amanipour

Open Access Theses & Dissertations

The analysis of time duration between consecutive R waves of electrocardiogram (ECG) is a standard method to evaluate the variations in heart rate. The physiological literature reveals that blood glucose levels modulate the autonomic nervous system (ANS) activity and heart rate variability (HRV) is representative of the cardiovascular autonomic function. In the research, an investigation was carried out to investigate the relationship between HRV signal measures derived from ECG and arterial blood glucose changes in five non-diabetic and five diabetic individuals during normoglycemic and mildly hyperglycemic conditions. A CleveLabs BioCapture wireless device was used to acquire ECG signals from ten …

Preparation And Characterization Of Iron Oxide And Hydroxide Based Nanomaterials, Guillermo Carbajal Franco

Open Access Theses & Dissertations

Iron (Fe) oxides and hydroxides are common and abundant materials. They exhibit diverse crystal structures, properties and phenomena by virtue of which they find a wide range of scientific and technological applications. Controlled growth and manipulation of the specific structure and electronic behavior to meet the requirements of a given application is a challenging problem in view of many possible phases and composition of the resulting materials. The preparation method and experimental conditions will, therefore, significantly affect the properties and performance of Fe oxides and hydroxides. The goal of the project is to obtain Fe-based oxide/hydroxide catalytic materials and to …

Development Of A New Evolutionary Algorithm Based On Adaptive Echolocation Applied To A Multi Objective Version Of The Redundancy Allocation Problem, Karla Rocio Gutierrez

Open Access Theses & Dissertations

The intention of this research is to develop a new algorithm that it is mainly focus in the principle of echolocation or also called biosonar. This principle is active in many animals such as: birds, shrews, dolphins and bats, these last ones are going to be a fundamental part of our study. These animals use it as radar in order to find food, obstacles or just to locate objects.

These animals use ultrasound beams with a certain degree of angle and multiple receivers; such as the two ears that are located slightly apart, so at the time of the returning …

Residential Recycling Study, Richard Adams

Open Access Theses & Dissertations

The purpose of this study is to gain baseline performance figures and statistics for El Paso's curbside recycling program. With these baseline statistics the effectiveness of changes for promotion and outreach can be evaluated once implemented. In addition, operational changes such as to every other week recycling collection rather then every week or a "pay as you throw" system could be evaluated.

Study Of Probabilistic Approach For Structural Health Assessment Of Aerospace Structures, Jose Antonio Garcia

Open Access Theses & Dissertations

Current practical approaches used in structural health assessment programs of aerospace structures involve performing a fracture mechanics analysis to verify the safe life of structural components. The analysis typically makes several conservative assumptions implemented by NASA fracture control standard practices for critical structural components. This well-established paradigm for fracture control follows a deterministic approach and, in some cases, the calculations may produce overly conservative remaining life estimates.

This thesis describes the results of a study to approach the health assessment challenge of several critical components using probabilistic methods. The probabilistic analysis takes the current deterministic model and identifies variables that …

Microstructural Architecture Developed In The Fabrication Of Solid And Open-Cellular Copper Components By Additive Manufacturing Using Electron Beam Melting, Diana Alejandra Ramirez

Open Access Theses & Dissertations

The fabrication of Cu components were first built by additive manufacturing using electron beam melting (EBM) from low-purity, atomized Cu powder containing a high density of Cu2O precipitates leading to a novel example of precipitate-dislocation architecture. These microstructures exhibit cell-like arrays (1-3µm) in the horizontal reference plane perpendicular to the build direction with columnar-like arrays extending from ~12 to >60 µm in length and corresponding spatial dimensions of 1-3 µm. These observations were observed by the use of optical metallography, and scanning and transmission electron microscopy. The hardness measurements were taken both on the atomized powder and the Cu components. …

High Temperature Oxidation Behavior Of Nb-20si-20cr Alloys With Hafnium Additions, Alma Rosa Vazquez

Open Access Theses & Dissertations

Advances in aircraft and gas turbine engine technology have steadily increased the operating temperatures, and even the state of the art materials can not meet the requirements for the new challenges. Efforts are under way to study the possibility of substituting nickel-based alloys with niobium-based alloys that offer higher melting points and excellent mechanical properties. Notwithstanding these good properties, the utilization of Nb-based alloys is limited since oxidation resistant is still a serious problem. Therefore understanding the corrosion behavior of Nb-based alloys is a crucial step to enhancing oxidation resistance.

The oxidation behavior of two alloys from the Nb-Si-Cr system …

Evaluation And Recommendation Of Mix Design For Emulsion Stabilized Bases, Samuel Franco

Open Access Theses & Dissertations

Asphalt emulsion has been used for base material stabilization in a few TxDOT districts. Results from these practices were quite different. The initial performance of two projects on US287 constructed around 2000 in the Amarillo District has been found to be satisfactory. However, the Yoakum District has reported problems with asphalt emulsion for base work in a project on FM 237. The preliminary conclusion from these trials has been that asphalt emulsion may not perform well in the high humidity/high rainfall areas like east Texas. On the other hand, using calcium-based additives to stabilize base courses in road construction has …

Analysis Of Indoor And Outdoor Particulate Matter At Various Residences In The El Paso Region, Joseph Christopher Pinon

Open Access Theses & Dissertations

This thesis is a presentation of particulate matter data collected from February 2007 to June 2008. Personal environment monitors (PEM), which measured 7-day PM2.5 concentrations, had been deployed at 14 homes during the 2007 year and deployed in 16 different homes during the 2008 sampling year. Within each sampling year, sampling occurred for two one-week (7-day) periods during each season. In addition to PEM sampling, a tapered element oscillating microbalance (TEOM) continuous sampler had been deployed in both indoors and outdoors at one pre-selected household per week. Gravimetric, chemical, and black carbon analysis had been performed on the PEM PM2.5 …

An Ultra Low Power Subthreshold Delta Sigma Digital To Analog Converter, Ricardo Baca

Open Access Theses & Dissertations

Abstract

In the last four decades the incorporation of analog, digital and mixed-signal integrated circuits (IC) using Complementary Metal Oxide Semiconductor (CMOS) technology has been dramatically increasing and is improving almost every aspect of modern life. Furthermore, the continuous advances in CMOS Very Large System Integration (VLSI) technology allow higher integration densities and the increasing number of subsystems in a single chip results in higher speed execution and lower power consumption. Therefore, the increasing digitalization in electronic circuits across a wide range of battery-operated applications where reliability and power dissipation are critical requires Digital to Analog Converters (DACs) with higher …

Design And Cfd Optimization Of Methane Regenerative Cooled Rocket Nozzles, Christopher Linn Bradford

Open Access Theses & Dissertations

Liquid rocket engines benefit in life cycle from the active regenerative cooling method which passes the fuel as the coolant through channels surrounding the combustion chamber. These channels are designed and optimized using structural considerations as well as heat transfer theory, then CFD simulations with the software FLUENT are performed for the final analysis. The difficulty in using methane as the fuel/coolant is addressed, and requires the use of the ideal gas numerical model in preliminary CFD simulations. Comparison to real gas numerical models is made, and results also given for one channel design. The techniques utilized herein allow the …

Asphaltene As Light Harvesting Material In Dye Sensitized Solar Cell, Rajab Emhemed Abujnah

Open Access Theses & Dissertations

This Dissertation characterizes the first asphaltene DSSC (dye-sensitized solar cell), in which light to electricity conversion efficiency has improved from 0 % to 1.8 %. Four natural organic asphaltene factions, namely, un-fractionated asphaltene, Fr. 1 Asphaltene, Fr.2 asphaltene, Fr.3 and Fr.4 were extracted and tested for various solar cell parameters of TiO2 based dye-sensitized solar cell DSSC. DSSCs were fabricated using the four individual asphaltene dyes. The photovoltaic performance of the cells was examined by determining the various parameters such as open-circuit voltage, short-circuit current, fill factor, and series resistance. The overall energy conversion efficiency was also measured to correlate …

Photocatalytic Destruction Of Halogenated Organic Compounds In Water With A New Photocatalyst, Mabruka Hadidan

Open Access Theses & Dissertations

In this research, a newly developed high surface area semiconductor porous material was synthesized from potassium titanium niobium mixed oxide (KTiNbO5) to be used as a photo catalyst in the presence of UV light to degrade halogenated organic compounds in water. The goal of the project was to investigate the catalytic activity of the material for its effectiveness in the degradation of the halogenated organic compounds, and it is the first investigation of this new photocatalyst with halogenated compounds. Model compounds dichloromethane, 1-chlorobutane, chlorobenzene, and trifluoroacetic acid in aqueous solutions were tested with the photocatalyst under ultraviolet light irradiation, using …

Modeling Impulse Oscillometry Data: Using Augmented-Ric And Extended-Ric Respiratory Impedance Model Paramaters To Track Pulmonary Health And Disease, Carlos Domingo Ramos Rocha

Open Access Theses & Dissertations

Respiratory diseases are a great health concern. Early detection of disease could greatly improve quality of life and yet the most common pulmonary function test can be an unreliable diagnostic method, especially in the case of children. A reliable method of detecting and assessing small airway impairment could greatly help with timely diagnosis. This research approaches this problem by taking Impulse Oscillometry (IOS) data and its model-derived parameters and assessing their utility in tracking respiratory function and more specifically, small airway function.

This research first describes the use of electric circuits as models to describe lung properties at distinct regions …

A Framework For Strategic Sustainable Supply Chain Design, Abril Paola Vazquez

Open Access Theses & Dissertations

Sustainable supply chain management has raised interest considerably in recent years; due to environmental concerns from society as well industries. There is a high interest in the industries to solve this problem but many of the frameworks are directed to specific situation or structure. A strategic sustainable supply chain design framework is presented with the purpose of providing many companies, including small and big industries, the means to maintain an eco-friendly operation. These include; industry plants, distribution centers, and retailers.

Experimental Investigation Of Magnesium/Regolith Combustion For In-Situ Production Of Materials On The Moon, Christopher White

Open Access Theses & Dissertations

Future settlements on the Moon will require that strong, cost-effective structural materials be developed in whole or in part from locally available resources. Such materials can be created in-situ from the lunar regolith using self-propagating high-temperature synthesis (SHS). By mixing the lunar regolith with metal additives, such as aluminum or magnesium, a combustible mixture is formed which, when ignited, can reach temperatures high enough to allow combustion to be self-sustaining, sintering the lunar regolith without further energy input and without the need for atmospheric oxygen. The resulting products may be strong enough for some structural applications, such as radiation shielding, …