Engineering Commons^™

Computational Fluid Dynamics Analysis Of An Ideal Anguilliform Swimming Motion, Charles Rogers

University of New Orleans Theses and Dissertations

There is an ongoing interest in analyzing the flow characteristics of swimming fish. Biology has resulted in some very efficient motions and formulating these motions is of interest to engineers. One such theory was written by Dr. William Vorus and Dr. Brandon Taravella involving ideal efficiency. It is therefore interesting to test the calculations to see if it is possible to design a motion that can create thrust without necessarily creating vorticity. The computational fluid dynamics software of ANSYS Fluent was used to calculate the resulting flow field of the eel motion to compare with the theoretical values.

Identification Of Hydrodynamic Forces Developed By Flapping Fins In A Watercraft Propulsion Flow Field, Erdem Aktosun

University of New Orleans Theses and Dissertations

In this work, the data analysis of oscillating flapping fins is conducted for mathematical model. Data points of heave and surge force obtained by the CFD (Computational Fluid Dynamics) for different geometrical kinds of flapping fins. The fin undergoes a combination of vertical and angular oscillatory motion, while travelling at constant forward speed. The surge thrust and heave lift are generated by the combined motion of the flapping fins, especially due to the carrier vehicle’s heave and pitch motion will be investigated to acquire system identification with CFD data available while the fin pitching motion is selected as a function …

Electrochemical Disinfection Of Municipal Wastewater Using Alternating Current, Xavier A. Chavez Reyes

University of New Orleans Theses and Dissertations

This research focused on chlorine-free disinfection of wastewater by complying with today's regulations. The equipment used was a continuous flow electrochemical reactor connected to an alternating current (AC) power supply. The electrodes used were made out of titanium coated with iridium oxide. To determine the inactivation of Escherichia Coli, a bacterial count method based on the USEPA method 1603 was used.

After several experiments it was determined that electrochemical disinfection using AC was not efficient and economic enough to be classified as a viable alternative to chlorine disinfection. It was demonstrated that chlorine can be produced by electrolysis using AC …

Design And Software Validation Of Coded Communication Schemes Using Multidimensional Signal Sets Without Constellation Expansion Penalty In Band-Limited Gaussian And Fading Channels, Milton I. Quinteros

University of New Orleans Theses and Dissertations

It has been well reported that the use of multidimensional constellation signals can help to reduce the bit error rate in Additive Gaussian channels by using the hyperspace geometry more efficiently. Similarly, in fading channels, dimensionality provides an inherent signal space diversity (distinct components between two constellations points), so the amplitude degradation of the signal are combated significantly better.

Moreover, the set of n-dimensional signals also provides great compatibility with various Trellis Coded modulation schemes: N-dimensional signaling joined with a convolutional encoder uses fewer redundant bits for each 2D signaling interval, and increases intra-subset minimum squared Euclidean distance (MSED) to …

Investigation Of The Quenching Characteristics Of Steel Components By Static And Dynamic Analyses, Pratik Sarker

University of New Orleans Theses and Dissertations

Machine components made of steel are subjected to heat treatment processes for improving mechanical properties in order to enhance product life and is usually done by quenching. During quenching, heat is transferred rapidly from the hot metal component to the quenchant and that rapid temperature drop induces phase transformation in the metal component. As a result, quenching generates some residual stresses and deformations in the material. Therefore, to estimate the temperature distribution, residual stress, and deformation computationally; three-dimensional finite element models are developed for two different steel components – a spur gear and a circular tube by a static and …

Electro-Disinfection Of Municipal Waste Water Using Direct Current, Julio A. Acosta Vega

University of New Orleans Theses and Dissertations

Wastewater treatment has always been a problem to human settlers. Events such as the great stink of London during the summer of 1858 have pushed engineers into developing new technologies to deal with such wastes in effective and safe ways. Research projects like this aim to find ways of improving performance, economics, or environmental friendliness of treatment and disinfection methods.

This thesis deals with the effectiveness, mechanisms of action, by-products and side effects of using DC current to disinfect secondary effluent. It is proposed as an alternative to conventional methods, such as chlorination, which are not always environmentally friendly or …

Educational Modeling For Fault Analysis Of Power Systems With Statcom Controllers Using Simulink, Tetiana Brockhoeft

University of New Orleans Theses and Dissertations

The analysis of power systems under fault condition represents one of the most important and complex tasks in power engineering. The study and detection of these faults are necessary to ensure that the reliability and stability of the power system do not suffer a decrement as a result of a critical event such as fault. The purpose of this thesis is to develop and to present an educational tool for students to model FACTS devices using Simulink. Furthermore, the development of this thesis provides the means for students to model different types of faults. The development is based on presenting …

Modal Characterization And Structural Dynamic Response Of A Crane Fly Forewing, Jose E. Rubio

University of New Orleans Theses and Dissertations

This study describes a method for conducting the structural dynamic analysis of a crane fly (family Tipulidae) forewing under different airflow conditions. Wing geometry is captured via micro-computed tomography scanning. A finite element model of the forewing is developed from the reconstructed model of the scan. The finite element model is validated by comparing the natural frequencies of an elliptical membrane with similar dimensions of the crane fly forewing to its analytical solution. Furthermore, a simulation of the fluid-structure interaction of the forewing under different airflows is performed by coupling the finite element model of the wing with a …

Parallel Computing Of Particle Filtering Algorithms For Target Tracking Applications, Jiande Wu

University of New Orleans Theses and Dissertations

Particle filtering has been a very popular method to solve nonlinear/non-Gaussian state estimation problems for more than twenty years. Particle filters (PFs) have found lots of applications in areas that include nonlinear filtering of noisy signals and data, especially in target tracking. However, implementation of high dimensional PFs in real-time for large-scale problems is a very challenging computational task.

Parallel & distributed (P&D) computing is a promising way to deal with the computational challenges of PF methods. The main goal of this dissertation is to develop, implement and evaluate computationally efficient PF algorithms for target tracking, and thereby bring them …

An Empirical Study Of Semantic Similarity In Wordnet And Word2vec, Abram Handler

University of New Orleans Theses and Dissertations

This thesis performs an empirical analysis of Word2Vec by comparing its output to WordNet, a well-known, human-curated lexical database. It finds that Word2Vec tends to uncover more of certain types of semantic relations than others -- with Word2Vec returning more hypernyms, synonomyns and hyponyms than hyponyms or holonyms. It also shows the probability that neighbors separated by a given cosine distance in Word2Vec are semantically related in WordNet. This result both adds to our understanding of the still-unknown Word2Vec and helps to benchmark new semantic tools built from word vectors.

Cruise Ship Preliminary Design: The Influence Of Design Features On Profitability, Justin Epstein

University of New Orleans Theses and Dissertations

This thesis provides a means to estimate the physical and performance characteristics of a preliminary cruise ship design. The techniques utilized to estimate these characteristics are showcased in the user-friendly interface known as the Cruise Ship Analysis Tool (CSAT). Using the CSAT, the implications that design feature decisions in the preliminary design stage have on a cruise ship’s profitability is analyzed. Then, the most profitable design feature assemblage among a finite number of varying design feature combinations is estimated and compared among cruise ship designs with different passenger carrying capacities. Profitability is analyzed using the measure of merit (MOM) known …

A Further Look At Capacitors In Complex Arrangements, Kenneth V. Cartwright, Patrick Russell, Edit J. Kaminsky

Electrical Engineering Faculty Publications

Recently, a previous contributor showed how the delta-wye conversion may be applied to find the equivalent capacitance of five capacitors arranged in a bridge configuration. In fact, that contributor gave an algorithm for this purpose which showed that the equivalent capacitance depends upon all five capacitors. However, in this paper, we point out that there is a special case where the equivalent capacitance does not depend upon one of the five capacitors.

Finding The Minimum Input Impedance Of A Second-Order Twofold-Gain Sallen-Key Low-Pass Filter Without Calculus, Kenneth V. Cartwright, Edit J. Kaminsky

Electrical Engineering Faculty Publications

We derive an expression for the input complex impedance of a Sallen-Key second-order low-pass filter of twofold gain as a function of the natural frequency ωo and the quality factor Q. From this expression, it is shown that the filter behaves like a Frequency Dependent Negative Resistance (FDNR) element for low frequencies and as a single resistor at high frequencies. Furthermore, the minimum input impedance magnitude is found without using calculus. We discovered that the minimum input impedance magnitude is inversely proportional to Q and can be substantially less than its high-frequency value. Approximations to the minimum input impedance and …

Security Analysis On Network Systems Based On Some Stochastic Models, Xiaohu Li

University of New Orleans Theses and Dissertations

Due to great effort from mathematicians, physicists and computer scientists, network science has attained rapid development during the past decades. However, because of the complexity, most researches in this area are conducted only based upon experiments and simulations, it is critical to do research based on theoretical results so as to gain more insight on how the structure of a network affects the security. This dissertation introduces some stochastic and statistical models on certain networks and uses a k-out-of-n tolerant structure to characterize both logically and physically the behavior of nodes. Based upon these models, we draw several illuminating results …

Steady State Voltage Stability Enhancement Using Shunt And Series Facts Devices, Jahnavi Lakkireddy

University of New Orleans Theses and Dissertations

It is specifically important to focus on voltage stability analysis of the power system to avoid worst case scenarios such as voltage collapse. The purpose of this thesis is to identify methods for enhancing the steady-state voltage stability using FACTS devices and determining their impact on real and reactive power losses, improvement of bus voltage magnitude, and transmission line loadability. To achieve this, FACTS devices such as Static VAR Compensator (SVC), Static Synchronous Compensator (STATCOM), and Thyristor Controlled Series Capacitor (TCSC) are used in the test system as three separate test cases. The results obtained assist in drawing conclusions on …

Comparison Of Nonlinear Filtering Methods For Battery State Of Charge Estimation, Klaus Zhang

University of New Orleans Theses and Dissertations

In battery management systems, the main figure of merit is the battery's SOC, typically obtained from voltage and current measurements. Present estimation methods use simplified battery models that do not fully capture the electrical characteristics of the battery, which are useful for system design. This thesis studied SOC estimation for a lithium-ion battery using a nonlinear, electrical-circuit battery model that better describes the electrical characteristics of the battery. The extended Kalman filter, unscented Kalman filter, third-order and fifth-order cubature Kalman filter, and the statistically linearized filter were tested on their ability to estimate the SOC through numerical simulation. Their performances …

Analysis And Detection Of Heap-Based Malwares Using Introspection In A Virtualized Environment, Salman Javaid

University of New Orleans Theses and Dissertations

Malware detection and analysis is a major part of computer security. There is an arm race between security experts and malware developers to develop various techniques to secure computer systems and to find ways to circumvent these security methods. In recent years process heap-based attacks have increased significantly. These attacks exploit the system under attack via the heap, typically by using a heap spraying attack. The main drawback with existing techniques is that they either consume too many resources or are complicated to implement. Our work in this thesis focuses on new methods which offloads process heap analysis for guest …

Efficient Fpga Architectures For Separable Filters And Logarithmic Multipliers And Automation Of Fish Feature Extraction Using Gabor Filters, Arjun Kumar Joginipelly

University of New Orleans Theses and Dissertations

Convolution and multiplication operations in the filtering process can be optimized by minimizing the resource utilization using Field Programmable Gate Arrays (FPGA) and separable filter kernels. An FPGA architecture for separable convolution is proposed to achieve reduction of on-chip resource utilization and external memory bandwidth for a given processing rate of the convolution unit.

Multiplication in integer number system can be optimized in terms of resources, operation time and power consumption by converting to logarithmic domain. To achieve this, a method altering the filter weights is proposed and implemented for error reduction. The results obtained depict significant error reduction when …

Non-Linear Electromechanical System Dynamics, Shathiyakkumar Ganapathy Annadurai

University of New Orleans Theses and Dissertations

Electromechanical systems dynamics analysis is approached through nonlinear differential equations and further creating a state space model for the system. There are three modules analyzed and validated, first module consists two magnet coupled with a mass spring damper system as a band-pass system, Low-pass equivalent system and Low-pass equivalent system through perturbation analysis. Initially Band Pass frameworks for the systems are formulated considering the relation between the mechanical forcing and current. Using Mathematical tools such as Hilbert transforms, Low-Pass equivalent of the systems are derived. The state equations of the systems are then used to design a working model in …

A Framework For Air Dispersion Modeling – A Hypothetical Case Of Port Operations, Amrita Iyer

University of New Orleans Theses and Dissertations

One of the primary modes for pollutants to reach the human body is through their release into the atmosphere and dispersion in the nearby areas. This makes air emissions one of the important components of an environmental assessment. They are frequently of interest to the people living in the vicinity of the site. The analysis carried out in this research provides a framework for atmospheric dispersion modeling of air pollutants using AERMOD, the United States Environmental Protection Agency (US EPA) approved regulatory model, for modeling port related emissions. There are various sources of emissions from the ports, however for this …

Development Of Generalized Trimaran Hullform Design Methodology For A Naval Warship, Samuel F. Kulceski

University of New Orleans Theses and Dissertations

The purpose of this thesis is to advance research in the development of trimaran hullforms and analyze the feasibility of the hullform for a possible naval surface combatant using current hullform design tools.

The “Generalized” Trimaran Methodology is a new process that focuses on the manipulation of the three hulled system’s total sectional area curve. The methodology is intended for rapid hull form development during the conceptual design phase, and can analyze an infinite number of trimaran hullforms.

The thesis first proposes a new methodology for the design of trimaran hullforms, describes how the process was applied to an existing …

Characterization Of Dredged Sediment Used In Coastal Restoration And Marsh Creation Projects, Gregory A. Mattson Ii

University of New Orleans Theses and Dissertations

To minimize coastal land loss and create new land, dredged sediment has been in use in coastal Louisiana during the last several years. Engineering properties and material characteristics of dredged material are input parameters in several mathematical models used to predict the long-term hydrodynamic behavior of the coast. Therefore, proper characterization of the dredged material is of utmost importance in the correct design of coastal restoration and land creation projects. The sedimentation characteristics of the dredged material, among other factors, depends on the (a) grain size distribution of the dredged material, (b) salinity (fresh, brackish, or saltwater environment) of the …

Estimation Of Sediment Resuspension And Deposition In Coastal Waters, John E. Filostrat

University of New Orleans Theses and Dissertations

The Louisiana Gulf Coast is a dynamic system of heavy influence on the cultures that live and prosper around it. Land in this area is in jeopardy of being lost. In 2017, the Coastal Protection and Restoration agency will issue a new State Master and this thesis provides a more intricate way of numerically predicting the behaviors of associated sediments. A model for the estimation of resuspension and deposition is proposed and prepared for integration into the existing model. The silt and clay fractions of the bed sediment and the sediment inflow were modeled by the widely used hydrodynamic models …

A Multivariable Statistical Approach To Managing United States Coast Guard Small Boats, Brian D. Fitzpatrick

University of New Orleans Theses and Dissertations

The Coast Guard has developed several systems to measure the performance of its engineering and logistics organizations. The development of these measures is based upon the need to show where and how the organization meets the American taxpayer’s needs. The use of multivariable regressions and determining the statistical distributions of the variables will show the adequacy of the measures and processes currently used. They will also determine a better way to measure the performance of the Coast Guard Small Boat Fleet. This research will analyze the 47 Motor Life Boat and 25 Response Boat-Small data from fiscal year 2011 to …

Analysis Of Fault Location Methods On Transmission Lines, Sushma Ghimire

University of New Orleans Theses and Dissertations

Analysis of different types of fault is an important and complex task in a power system. Accurate fault analysis requires models that determine fault distances in a transmission line. The mathematical models accurately capture behavior of different types of faults and location in a timely manner, and prevents damaging power system from fault energy. The purpose of this thesis is to use two methods for determining fault locations and their distance to the reference end buses connected by the faulted transmission line. The two methods used in this investigation are referred to as impedance-based and traveling wave methods. To analyze …

One-Dimensional Dynamic Modeling Of The Lower Mississippi River, Tshering T. Gurung

University of New Orleans Theses and Dissertations

The Mississippi River (MR) has been engineered with the development of the levee system, dams for flood control measures, jetties, revetments and dredging of the navigation channel. These alterations have reduced the replenishment of the sediment to the Louisiana Coastal area. To aid in the restoration planning, 1-D numerical models have been calibrated and validated to predict the river response to various changes such as channel modifications, varied flow conditions and hurricane situations. This study utilized the HEC-RAS 4.1 and the CHARIMA (Dr. Forrest Holly, University of Iowa). The models were calibrated for hydrodynamics and sediment using Tarbert Landing discharges …

Reducing Vortex-Induced Vibration Of Drilling Risers With Marine Fairing, Aswin Janardhanan

University of New Orleans Theses and Dissertations

Since the offshore drilling for oil and gas is venturing into ever greater water depths, drilling risers face problems of vortex-induced vibrations due to the currents. Vortexinduced vibrations are a major fluid load and fatigue component on the long, smooth, and slender bodies placed in a fluid flow and measures must be taken to suppress the shedding of the Karman vortex sheets from its edges. One of the ways to reduce the vibration is to use marine fairings which are attached to the drilling risers with the help of weather vanes. In this thesis, CFD analysis based on solving RANS …

A 3-D Hydrodynamic Modeling At Head Of Passes Of The Mississippi River, Tatiana Pavlyukova

University of New Orleans Theses and Dissertations

A 3-D numerical model of the Head of Passes and Bird’s Foot Delta of the Mississippi River- was developed. The model was based on Delft3D and simulates the hydrodynamics and salinity transport for Head of Passes area from RM 6.5 to Gulf of Mexico. The model was calibrated, validated, and used to predict the response of the river to certain stimuli, such as - channel closures, channel modifications and diversions. The model includes West Bay, Southwest Pass, South Pass, Pass-A-Loutre and Main Pass. Three basic cases were developed: existing conditions, closure of Southwest Pass with a levee of 1.5m with …

3-D Hydrodynamic And Non-Cohesive Sediment Transport Modeling In The Lower Mississippi River, Grecia A. Teran Gonzalez

University of New Orleans Theses and Dissertations

The purpose of this research is to develop a 3-D numerical model on the Lower Mississippi River to simulate hydrodynamics and non-cohesive sediment transport. The study reach extends from Bonnet Carré Spillway (RM 127) to Head of Passes (RM 0). Delft3D with sigma coordinates was selected as the river modeling tool. This model River domain is characterized by a complex distributary system that connects the Mississippi River to the Gulf of Mexico. The boundary conditions were: water levels in the Gulf and Head of Passes; and discharges upstream. For the calibration, there are observed data for both types of boundary …

Hydrodynamics And Salinity Of Pontchartrain Estuary During Hurricanes, Sina Amini

University of New Orleans Theses and Dissertations

A hurricane is a combination of sustained winds, low atmospheric pressures and precipitation. Over the past decades, Louisiana has experienced several devastating hurricanes.

The east bank of the City of New Orleans is bounded by Lake Pontchartrain to the North and the Mississippi River to the South. Lake Pontchartrain is a brackish system connected to the Gulf of Mexico through Lake Borgne to the East. As a Hurricane enters the Estuary from the Gulf of Mexico, it imposes a sustained surge of a few meters which may lead to flooding in areas which are not protected by levees. These flood …