Engineering Commons^™

Plant Height Estimation Using Rtk-Gnss Enabled Unmanned Aerial Vehicle (Uav) Photogrammetry, Pascal Izere

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Using Unmanned Aerial Vehicle (UAV) based remote sensing technology to provide high-throughput plant phenotypic traits has shown a great potential of eliminating manual measurements. For example, the use of UAV imaging to estimate plant height is of great interest to plant breeders and agronomists. Height is linked to a plant’s physical growth, light competition, health, biomass, and yield; thus, its accurate estimation is crucial in breeding. Conventionally, accurate height estimation by UAV platforms relies heavily on the use of ground control points (GCPs) for geometric calibration due to the relatively low positioning accuracy of regular differential global navigation satellite system …

Economic And Input-Use Efficiency Of Nitrogen Management Techniques In Non-Irrigated Maize Production, Katie J. Bathke

Honors Theses

The efficiency of nitrogen (N) management has become a main concern in agricultural cropping systems for understanding the optimal N rate to help producers improve economically and reduce the exhaustion of natural resources environmentally. Nitrogen rates vary both temporally and spatially by the interactions of the soil environment and rainfall through a growing season. Thus, a site-specific approach can further optimize this variability with the understanding of the role soil variability plays in the N rate applied to a non-irrigated field. The objective of this study was to evaluate the various nitrogen treatments for their nutrient use efficiency and economic …

Estimation Of Cotton Canopy Parameters Based On Unmanned Aerial Vehicle (Uav) Oblique Photography, Jinyong Wu, Sheng Wen, Yubin Lan, Xuanchun Yin, Jiantao Zhang, Yufeng Ge

Biological Systems Engineering: Papers and Publications

Background: The technology of cotton defoliation is essential for mechanical cotton harvesting. Agricultural unmanned aerial vehicle (UAV) spraying has the advantages of low cost, high efficiency and no mechanical damage to cotton and has been favored and widely used by cotton planters in China. However, there are also some problems of low cotton defoliation rates and high impurity rates caused by unclear spraying amounts of cotton defoliants. The chemical rate recommendation and application should be based upon crop canopy volume rather than on land area. Plant height and leaf area index (LAI) is directly connected to plant canopy structure. …

Power-Over-Tether Unmanned Aerial System Leveraged For Trajectory Influenced Atmospheric Sensing, Daniel Rico

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

The use of unmanned aerial systems (UASs) in agriculture has risen in the past decade and is helping to modernize agriculture. UASs collect and elucidate data previously difficult to obtain and are used to help increase agricultural efficiency and production. Typical commercial off-the-shelf (COTS) UASs are limited by small payloads and short flight times. Such limits inhibit their ability to provide abundant data at multiple spatiotemporal scales. In this thesis, we describe the design and construction of the tethered aircraft unmanned system (TAUS), which is a novel power-over-tether UAS configured for long-term, high throughput atmospheric monitoring with an array of …

Aerial Flight Paths For Communication, Alisha Bevins

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

This body of work presents an iterative process of refinement to understand naive perception of communication using the motion of an unmanned aerial vehicle (UAV). This includes what people believe the UAV is trying to communicate, and how they expect to respond through physical action or emotional response. Previous work in this area sought to communicate without clear definitions of the states attempting to be conveyed. In an attempt to present more concrete states and better understand specific motion perception, this work goes through multiple iterations of state elicitation and label assignment. The lessons learned in this work will be …

Research And Education For Optimizing The Development And Implementation Of An Unmanned Aircraft Program At The Nebraska Department Of Transportation, Wayne Woldt, Jon Starr, Christopher M. U. Neale

Nebraska Department of Transportation: Research Reports

This report describes the development and implementation of an Unmanned Aircraft System Program at the Nebraska Department of Transportation (NDOT). The project involved the selection and purchase of appropriate UAS and imaging systems for NDOT, education and training for NDOT personnel with classroom and hands-on operation of UAS with the goal of obtaining proficiency and pilot licenses. In addition, the development of policy for the use of UAS within NDOT was accomplished as well as standard operating procedures (SOP) documentation and the development of example case studies of interest to NDOT using the purchased systems and technology.

Research And Education For Optimizing The Development And Implementation Of An Unmanned Aircraft Program At The Nebraska Department Of Transportation, Wayne Woldt, Jon Starr, C.M.U. Neale

Nebraska Department of Transportation: Research Reports

This report describes the development and implementation of an Unmanned Aircraft System Program at the Nebraska Department of Transportation (NDOT). The project involved the selection and purchase of appropriate UAS and imaging systems for NDOT, education and training for NDOT personnel with classroom and hands-on operation of UAS with the goal of obtaining proficiency and pilot licenses. In addition, the development of policy for the use of UAS within NDOT was accomplished as well as standard operating procedures (SOP) documentation and the development of example case studies of interest to NDOT using the purchased systems and technology.

Field Demonstration Of Gpr And Uav Technologies For Evaluation Of Two Us 75/77 Bridges, Sepehr Pashoutani, Jinying Zhu, Chungwook Sim, Ji-Yong Lee

Nebraska Department of Transportation: Research Reports

Two Nebraska bridges with asphalt overlay were selected for nondestructive testing and evaluation (NDT/NDE). Three NDT techniques were conducted on these two bridges, including Ground Penetrating Radar (GPR), Half-Cell Potential (HCP) and Unmanned Aerial Vehicle (UAV) imaging. NDT data were collected during three construction stages of the bridges: (1) before repair on existing asphalt overlay; (2) on bare concrete after asphalt removal; (3) and after repairing delaminated concrete.

A machine learning technique, autoencoder, was used to build quantitative relationships between different NDT datasets. On bare concrete, the GPR amplitude and HCP voltage show a strong linear relationship. Then a threshold …

Power-Over-Tether Uas Leveraged For Nearly-Indefinite Meteorological Data Acquisition, Daniel Rico, Carrick Detweiler, Francisco Muñoz-Arriola

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Use of unmanned aerial systems (UASs) in agriculture has risen in the past decade. These systems are key to modernizing agriculture. UASs collect and elucidate data previously difficult to obtain and used to help increase agricultural efficiency and production. Typical commercial off-the-shelf (COTS) UASs are limited by small payloads and short flight times. Such limits inhibit their ability to provide abundant data at multiple spatiotemporal scales. In this paper, we describe the design and construction of the tethered aircraft unmanned system (TAUS), which is a novel power-over-tether UAS leveraging the physical presence of the tether to launch multiple sensors along …

Early Detection Of Near-Surface Void Defects In Concrete Pavement Using Drone Based Thermography And Gpr Methods, Zhigang Shen, Ece Erdogmus, George Morcous, Chngsheng Cheng, Zhexiong Shang, Theresa Mccabe, Antony Mohsen Kamal Masoud Kodsy

Nebraska Department of Transportation: Research Reports

The goal of this research is to evaluate the feasibility and the performance of using UAV-mounted infrared thermography (IRT) and ground penetration radar (GPR) to detect sub-surface voids caused by consolidation issues in concrete pavement. The motivation of the study is to identify the consolidation defects as early as the initial set of concrete to avoid having this problem in large pavement sections, which is costly and time consuming to repair. Using the two technologies in combination to detect subsurface voids in the concrete initial set stage is new and aims to take advantage of the strengths and minimize the …

Extending Mission Duration Of Uas Multicopters: Multi-Disciplinary Approach, Marc Lussier

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Multicopters are important tools in industry, the military, and research but suffer from short flight times and mission durations. In this thesis, we discuss three different ways to increase flight times and therefore increase the viability of using multicopters in a variety of missions. Alternate fuel sources such as hydrogen fuel and solar cells are starting to be used on multicopters, in our research we simulate modern fuel cells and show how well they currently work as the power source for multicopters and how close they are to becoming useful in Unmanned Aircraft System (UAS) technology. Increasing the efficiency in …

Domain Adaptation In Unmanned Aerial Vehicles Landing Using Reinforcement Learning, Pedro Lucas Franca Albuquerque

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Landing an unmanned aerial vehicle (UAV) on a moving platform is a challenging task that often requires exact models of the UAV dynamics, platform characteristics, and environmental conditions. In this thesis, we present and investigate three different machine learning approaches with varying levels of domain knowledge: dynamics randomization, universal policy with system identification, and reinforcement learning with no parameter variation. We first train the policies in simulation, then perform experiments both in simulation, making variations of the system dynamics with wind and friction coefficient, then perform experiments in a real robot system with wind variation. We initially expected that providing …

Uumanned Aerial Vehicle Data Analysis For High-Throughput Plant Phenotyping, Jiating Li

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The continuing population is placing unprecedented demands on worldwide crop yield production and quality. Improving genomic selection for breeding process is one essential aspect for solving this dilemma. Benefitted from the advances in high-throughput genotyping, researchers already gained better understanding of genetic traits. However, given the comparatively lower efficiency in current phenotyping technique, the significance of phenotypic traits has still not fully exploited in genomic selection. Therefore, improving HTPP efficiency has become an urgent task for researchers. As one of the platforms utilized for collecting HTPP data, unmanned aerial vehicle (UAV) allows high quality data to be collected within short …

Design Of Plant Protection Uav Variable Spray System Based On Neural Networks, Sheng Wen, Quanyong Zhang, Xuanchun Yin, Yubin Lan, Jiantao Zhang, Yufeng Ge

Biological Systems Engineering: Papers and Publications

Recently, unmanned aerial vehicles (UAVs) have rapidly emerged as a new technology in the fields of plant protection and pest control in China. Based on existing variable spray research, a plant protection UAV variable spray system integrating neural network based decision making is designed. Using the existing data on plant protection UAV operations, combined with artificial neural network (ANN) technology, an error back propagation (BP) neural network model between the factors affecting droplet deposition is trained. The factors affecting droplet deposition include ambient temperature, ambient humidity, wind speed, flight speed, flight altitude, propeller pitch, nozzles pitch and prescription value. Subsequently, …

Rapeseed Seedling Stand Counting And Seeding Performance Evaluation At Two Early Growth Stages Based On Unmanned Aerial Vehicle Imagery, Biquan Zhao, Jian Zhang, Chenghai Yang, Guangsheng Zhou, Youchun Ding, Yeyin Shi, Dongyan Zhang, Jing Xie, Qingxi Liao

Biological Systems Engineering: Papers and Publications

The development of unmanned aerial vehicles (UAVs) and image processing algorithms for field-based phenotyping offers a non-invasive and effective technology to obtain plant growth traits such as canopy cover and plant height in fields. Crop seedling stand count in early growth stages is important not only for determining plant emergence, but also for planning other related agronomic practices. The main objective of this research was to develop practical and rapid remote sensing methods for early growth stage stand counting to evaluate mechanically seeded rapeseed (Brassica napus L.) seedlings. Rapeseed was seeded in a field by three different seeding devices. A …

Rapeseed Seedling Stand Counting And Seeding Performance Evaluation At Two Early Growth Stages Based On Unmanned Aerial Vehicle Imagery, Biquan Zhao, Jian Zhang, Chenghai Yang, Guangsheng Zhou, Youchun Ding, Yeyin Shi, Dongyan Zhang, Jing Xie, Qingxi Liao

Biological Systems Engineering: Papers and Publications

The development of unmanned aerial vehicles (UAVs) and image processing algorithms for field-based phenotyping offers a non-invasive and effective technology to obtain plant growth traits such as canopy cover and plant height in fields. Crop seedling stand count in early growth stages is important not only for determining plant emergence, but also for planning other related agronomic practices. The main objective of this research was to develop practical and rapid remote sensing methods for early growth stage stand counting to evaluate mechanically seeded rapeseed (Brassica napus L.) seedlings. Rapeseed was seeded in a field by three different seeding devices. A …

Autonomous Uavs For Near Earth Environmental Sensing, David J. Anthony

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Unmanned aerial vehicles (UAVs) are playing an increasing role in large scale environmental monitoring. Small UAVs are increasingly used to monitor agricultural fields, infrastructure projects, and disaster areas. The combination of their sensors, ease of use, and portability make them an ideal tool for collecting information on demand about geographic regions. These small UAVs do have several significant limitations. The UAVs have very limited autonomy and fly pre-determined flight paths far above the underlying terrain, limiting the spatial resolution of the collected data. Current battery technology severely limits their flight times, which in turn limits the temporal resolution of the …

Design, Testing And Evaluation Of Robotic Mechanisms And Systems For Environmental Monitoring And Interaction, James K. Higgins

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Unmanned Aerial Vehicles (UAVs) have significantly lowered the cost of remote aerial data collection. The next generation of UAVs, however, will transform the way that scientists and practitioners interact with the environment. In this thesis, we address the challenges of flying low over water to collect water samples and temperature data. We also develop a system that allows UAVs to ignite prescribed fires. Specifically, this thesis contributes a new peristaltic pump designed for use on a UAV for collecting water samples from up to 3m depth and capable of pumping over 6m above the water. Next, temperature sensors and their …

Flying By Fire: Making Controlled Burns Safer For Humans And Uavs, Rebecca Horzewski, Carrick Detweiler

UCARE Research Products

A temperature sensing circuit board was developed that will allow Nimbus Lab's controlled burn starting UAV to react to the temperatures around it.

Invariant Inferring And Monitoring In Robotic Systems, Hengle Jiang

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

System monitoring can help to detect abnormalities and avoid failures. Crafting monitors for today’s robotic systems, however, can be very difficult due to the systems’ inherent complexity and its rich operating environment.

In this work we address this challenge through an approach that automatically infers system invariants and synthesizes those invariants into monitors. This approach is inspired by existing software engineering approaches for automated invariant inference, and it is novel in that it derives invariants by observing the messages passed between system nodes and the invariants types are tailored to match the spatial, time, temporal, and architectural attributes of robotic …

Using A Uav To Effectively Prolong Wireless Sensor Network Lifetime With Wireless Power Transfer, Jinfu Leng

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Wireless sensor networks are widely used for everything from border security to monitoring waterway pollution. Supplying energy for long term deployment is a main challenge in the applications of wireless sensor networks, as batteries are the primary energy source. Current wireless sensor networks deployed for long periods either require additional infrastructure, such as solar panels, or periodic maintenance. Our research lab has proposed a novel solution that uses a micro unmanned aerial vehicle (UAV) to wirelessly charge the sensor nodes and prolong the sensor network lifetime. Recent studies have shown that significant power can be transferred wirelessly over medium distances. …

Analysis, Optimization, And Implementation Of A Uav-Based Wireless Power Transfer System, Andrew Mittleider

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Wireless power transfer is rapidly advancing in its ability to efficiently transfer power to a variety of devices.

As the efficiency increases, more applications for these systems arise. Since magnetic resonant wireless power transfer can only transfer a small amount of power, most current applications only focus on powering low-powered devices.

Wireless Sensor Networks are composed of many low-powered nodes which currently require human interaction to remain powered. We propose recharging a low-powered Wireless Sensor Network (WSN) with a magnetic resonant wireless power transfer system attached to a quadrotor Unmanned Aerial Vehicle (UAV).

This thesis addresses three main challenges with …

Autonomous Aerial Water Sampling, John-Paul W. Ore

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Obtaining spatially separated, high frequency water samples from rivers and lakes is critical to enhance our understanding and effective management of fresh water resources. In this thesis we present an aerial water sampler and verify the system in field experiments. The aerial water sampler has the potential to vastly increase the speed and range at which scientists obtain water samples while reducing cost and effort. The water sampling system includes: 1) a mechanism to capture three 20 ml samples per mission; 2) sensors and algorithms for safe navigation and altitude approximation over water; and 3) software components that integrate and …