Engineering Commons^™

Dynamic Test Scheduling In Hardware-In-The-Loop Simulation Of Commercial Vehicles, Tenil Cletus

Master's Theses

Modern day commercial vehicles are controlled by various Electronic Control Units (ECU). They are not only tested as single units, but also by networking them in Controlled Area Network bus (CAN) to form a complete electrical control system. This is achieved using Hardware In the Loop (HIL) Integration Lab. In HIL, the electrical system is connected to a real time mathematical model of the vehicle plus it’s environment so as to form a loop.

Testing functionality of the electrical system begins by defining functional tests. An example would be testing cruise control activation. Executing each test is made possible by …

Bias Correction And Downscaling Of Climate Model Outputs Required For Impact Assessments Of Climate Change In The U.S. Northeast, Kazi F. Ahmed

Master's Theses

Global Climate Models (GCMs) are the typical sources of future climate data required for impact assessments of climate change. However, GCM outputs are related to model-related uncertainties and involve a great deal of biases. Bias correction of model outputs is, therefore, necessary before their use in impact studies. The coarse resolution of GCM simulations is another hindrance to their direct use in fine-scale impact analysis of climate change. Although downscaling of GCM outputs can be performed by dynamical downscaling using Regional Climate Models (RCMs), it requires large computational capacity. When daily climate data from multiple GCMs are required to be …

Computational Modeling For Transportation Network Security, Sherif A. Tolba

Master's Theses

No abstract provided.

Accurate Estimation Of Isoform And Gene Expression Levels From Next Generation Sequencing Data, Marius Nicolae

Master's Theses

Massively parallel transcriptome sequencing is quickly replacing microarrays as the technology of choice for performing gene expression profiling due to its wider dynamic range and digital quantitation capabilities. However, accurate estimation of expression levels from sequencing data remains challenging due to the short read length delivered by current sequencing technologies and still poorly understood protocol- and technology-specific biases.

To date, two main transcriptome sequencing protocols have been proposed in the literature. The most commonly used one, referred to as RNA-Seq, generates short (single or paired) sequencing tags from the ends of randomly generated cDNA fragments. An alternative protocol, referred to …

Understanding Formation And Transport Of Amorphous Iron Oxyhydroxides In Porous Media Using Microfluidic Flow Cells- A Novel Method To Study Freshwater Iron Cycling, Neha A. Ghaisas

Master's Theses

The ground water and surface water interface (GSI or Hyporheic zone) is a spatially- and temporally-fluctuating biogeochemical transition zone connecting these two distinct hydrological components. The mixing zone is characterized by a near neutral pH, ambient temperature and a sharp oxygen concentration which in turn has deep impact on the iron cycling and thus the fate of contaminants in the water column. We constructed an experimental micromodel that to observe key processes that affect biogeochemical iron cycling in the fresh water interface zones where the oxic surface water mixes with Fe (II) rich underlying ground water. The flow cell was …

Evaluation Of Cathode Materials For Low Temperature (500-700c) Solid Oxide Fuel Cells, Alexander M. Lassman

Master's Theses

Solid oxide fuel cells (SOFC) have gained a great deal of interest, due to their potential for high efficiency power generation and ability to utilize hydrogen fuel, as well as various hydrocarbon-based fuels. A recent trend in SOFC development has been towards lower operating temperatures (500-700°C), which can substantially reduce the cost and complexity of the system. This thesis presents an investigation into state of the art Ba- and La- based cathode materials for use in low temperature (500-700°C) solid oxide fuel cells.

Synthesis of A-site deficient [A=0.97] Ba_0.5Sr_0.5Co_0.8Fe_0.2O₃ (BSCF) was …

Air Plasma Sprayed Thermal Barrier Coatings: Experiments And Finite Element Analysis, Charles H. Thistle

Master's Theses

The purpose of this research was to examine the primary in-service failure mechanism of an air plasma sprayed thermal barrier coating commonly used in combustor applications, and to use that failure mechanism as a basis in developing a life prediction strategy. The research consisted of an experimental phase, in which the failure mechanism was identified and key features of the coating system measured, and a modeling phase, in which the findings of the experimental phase were used to build a system specific finite element model of the coating in order to extract quantitative data relevant to coating life.

Observations were …

Implementing A Long-Term Bridge Monitoring Strategy For A Composite Steel Girder Bridge, Shelley Plude

Master's Theses

The University of Connecticut and the Connecticut Department of Transportation have established a long-term bridge health monitoring system to monitor critical vulnerabilities in a group of bridges throughout the state. This research focuses on a three-span, simply supported composite steel girder bridge carrying three lanes of highway traffic. It has been a part of the University of Connecticut and Connecticut Department of Transportation monitoring network since 2004 and is fitted with 20 strain gauges located at midspan at the top and bottom of the web of each girder.

To monitor the critical vulnerabilities of the bridge, it is important to …

A Field And Modeling Assessment Of Methyl Mercury Accumulation In An Engineered Retention Pond, Lauren C. Blazeck

Master's Theses

The accumulation of methyl mercury (MeHg) in lakes during summer stratification has been demonstrated to affect biotic mercury (Hg) accumulation. However, small, shallow polymictic lakes can experience short-term stratification and mixing events that are largely unstudied in their abilities to affect Hg cycling and MeHg accumulation. Short-term stratification events and changing lake characteristics impact lake biogeochemical cycles, and therefore, MeHg production and transport. A field and modeling analysis was performed on a small suburban lake located on the University of Connecticut campus to determine the impact of lake characteristics on the potential for MeHg accumulation. MeHg concentrations ranged from non-detect …

Automation Of Orthodontic Wire Tester For Performing Three Point Bending Tests, Adithya Venkatesan

Master's Theses

Abstract

Understanding the biomechanical factors in orthodontics is important in order to improve the overall effectiveness of actual clinical treatment. An accurate method to study the threedimensional (3D) force systems and the resulting movements of teeth during orthodontic treatment is needed along with the understanding of the material properties of any orthodontic wire. Until recently, most of the orthodontic biomechanics literature was limited to twodimensional experimental studies. Recent advances in threedimensional computer modeling have also been developed but have been limited to the manual control of tooth movement. Overall, there is very little published evidence in the literature on the …

Effect Of Prostaglandin E2 On Mechanical Stresses Applied By Mc3t3-E1 Osteoblast-Like Cells On A Soft Hydrogel Substrate, Abhijit Deb Roy

Master's Theses

Osteoblasts are sensitive to mechanical stimuli and release Prostaglandin E2 (PGE2) when exposed to a fluid shear stress. The exact mechanism by which these cells sense mechanical stress is not well established. A study of the stresses applied by the osteoblasts, under the influence of PGE2, on a hydrogel provided information regarding intercellular-communication via changes in the substrate surface pattern.

A digital image correlation program was developed using the Levenberg-Marquardt optimization algorithm to analyze images and compare the deformations between pairs of images. Comparisons of images before and after the addition of PE2 to the media showed differences in the …

Development Of A High Strain-Rate Constitutive Model For Sands And Its Application In Finite Element Analysis Of Tunnels Subjected To Blast, William T. Higgins Iv

Master's Theses

This thesis describes the development of a constitutive model for simulating the high strain-rate behavior of sands and demonstrates the use of the model by analyzing underground tunnels subjected to blast. The constitutive model is based on the concepts of the critical state soil mechanics and bounding surface plasticity theory. The model captures the behavior of sand under multi-axial loading conditions and predicts both drained and undrained behavior at small and large strains. Perzyna’s overstress theory is incorporated in the model to simulate the viscoplastic behavior of sand under high strain rate. The model follows a nonassociated flow rule.

The …

Synthesis, Field Emission And Associated Degradation Mechanisms Of Tapered Zno Nanorods, Gregory M. Wrobel Mr.

Master's Theses

Equation 1..... 4

Equation 2..... 4

Equation 3..... 6

Equation 4..... 7

Equation 5..... 9

Equation 6..... 10

Equation 7..... 11

Equation 8..... 12

Equation 9..... 14

Equation 10..... 40

Equation 11..... 51

Synthesis, Field Emission and Associated Degradation Mechanisms of Tapered ZnO Nanorods

Gregory Michael Wrobel, M.S.

University of Connecticut, 2011

Modern development of field emitter arrays (FEA) has been made possible, partly thanks to the synthesis and development of one-dimensional (1D) nanostructures. High aspect ratio 1D nanostructures effectively amplify the electric field at the emitter tips, allowing electrons to be extracted at relatively low electric field. An inexpensive …

Fabrication And Characterization Of Zno/Cuo Core-Shell Nanowire Arrays, Kuo-Ting Liao

Master's Theses

Research into nanomaterials has become more and more popular because of their unique properties compared to bulk materials. Amongst various functional materials, zinc oxide (ZnO), with a direct electron energy band gap of 3.34 eV at room temperature, is an important optoelectronic material with an intrinsically n-type semiconducting property. However, to form a p-type ZnO semiconductor is still a challenge. Copper oxide (CuO), compared to ZnO, has a much smaller band gap, 1.2 eV, and shows an intrinsically p-type semiconducting property. It has been suggested that when CuO is alloyed with ZnO properly, a p-n semiconductor heterojunction can be formed …

Dissolved Organic Matter Characterization And Impact On Mercury Binding In An Urbanizing Watershed, Mykel Mendes

Master's Theses

Dissolved organic matter (DOM) is ubiquitous in aquatic ecosystems, interacting with and controlling the bioavailability and transport of mercury (Hg) and other trace metals through complexation. The complexation of ionic Hg (Hg²⁺) with DOM can either limit methyl mercury (MeHg) bioavailability or increase MeHg production by stimulating microbial growth. While substantial investigations have examined Hg-DOM interactions in forested ecosystems, little research has been conducted on the Hg-DOM relationship within an urbanized river setting subjected to various anthropogenic sources. The various runoff and pollutant sources vary in DOM quality and character. Three sources of organic matter from the North …

Development Of Analytic Tools For Computational Flame Diagnostics, Mehrnaz Rouhi Youssefi

Master's Theses

No abstract provided.

Experimental And Numerical Investigations Of Tubular-Shaped Direct Methanol Fuel Cells (Dmfcs), Travis R. Ward

Master's Theses

This study focuses on both the numerical and experimental investigations of the novel, passively operated, tubular-shaped, Direct Methanol Fuel Cell (DMFC) as an alternative geometry to the traditional planar-shaped fuel cell. The benefit of the tubular geometry compared to the planar geometry is the higher instantaneous volumetric power density provided by the larger active area, which could be beneficial in applications that require a high instantaneous power while occupying a small volume. First, a two-dimensional, two-phase, non-isothermal model was developed to investigate the steady-state performance and design characteristics of a tubular-shaped, passive DMFC. It was found that a higher ambient …

An Optical Analysis Of The Blowoff Behavior For Bluff Body-Stabilized Flames In Vitiated Flow, Trevor Jensen

Master's Theses

In bluff body-stabilized flames, a variety of physical phenomena contribute to the flame destabilization as lean blowoff is approached. These effects include increased strain on the flame shear layers, decreased attenuation of Bénard-von Kármán vortex shedding, and the presence of thermoacoustic instabilities. Lean, bluff body-stabilized flames were studied in an enclosed rectangular-duct, turbulent combustion rig with a triangular flame holder under vitiated conditions with both symmetric and asymmetric fuel distributions. Air and fuel flows within the rig were characterized using a PIV system and a continuous emissions gas analyzer, respectively.

High-speed videos of these flames undergoing blowoff were taken to …

Glucose Biosensor Using Electrospun Mn2o3-Ag Nanofibers, Shan Huang

Master's Theses

The highly porous Mn₂O₃-Ag nanofibers were fabricated by a facile two-step procedure (electrospinning and calcination) and then employed as the immobilization matrix for glucose oxidase (GOD) to construct an amperometric glucose biosensor. A notable enhancement of direct electron transfer between GOD and the electrode is observed at the Mn₂O₃-Ag-GOD modified electrode with a fast electron transfer rate constant. The biosensor also shows fast response to glucose, high sensitivity (40.60 μA×mM^-1×cm^-2), low detection limit (1.73 µM at S/N=3), low K_m,app value and excellent selectivity. These results indicate that …

Ros-Drill Automation: Visual Feedback Control And Rotational Motion Tracking, Jhon F. Diaz

Master's Theses

ICSI (intra-cytoplasmic sperm injection) has attracted research interest from both biological and engineering groups. The technology is constantly evolving to perform this procedure with precision and speed. One such development is the contribution of this thesis. We focus on a relatively recent procedure called Ros-Drill^© (rotationally oscillating drill), of which the early versions have already been effectively utilized for the mice. In the first part, we present a procedure to automate a critical part of the operation: initiation of the rotational oscillation, Visual feedback is used to track the pipette tip. Predetermined species-specific penetration depth is successfully utilized …

Electrochemical Synthesis Of Single Crystal Metal Nanowires, Nan Li

Master's Theses

Electrodeposition is an efficient and economical approach for template synthesis of one-dimensional (1D) nanostructured materials. Based on the porous membranes as templates during electrodeposition, metallic nanowires, nanorods, and nanotubes can overcome the geometrical restrictions to be inserted into the nanometric recesses with both diameter and length well controlled by tuning the size and thickness of the templates.

In this work, the morphology, growth rate and texture of copper nanowires prepared with templates were investigated by the controlled parameters in various experiments. Cu nanowire arrays with preferential orientations can be successfully synthesized into the Anodic Aluminum Oxide (AAO) templates with optimized …

Possibility Of Consolidated Wetland Mitigation In A Multi-Layered Legislated State, Juan P. Correa

Master's Theses

No abstract provided.

Reconfigurable Sampling For Enhanced Energy Efficiency In Power-Constrained Wireless Systems, Timothy Kurp

Master's Theses

Advancement in microelectronics and wireless communications has nurtured the development of low power and low cost wireless systems such as sensor networks. Each node is typically driven by a battery, which has a limited energy capacity that directly constrains node, and network lifetime. This presents a bottleneck for the widespread exploitation of wireless sensing technology. Therefore, improving the energy efficiency of wireless sensing devices is of critical importance and has attracted the attention of the research community.

In this work, a data-driven method has been proposed and systematically investigated. Specifically, this technique reconfigures, in real time, the rate of data …

Applied Control Strategies At A Cogeneration Plant, Joseph William Burns

Master's Theses

The purpose of this paper is to demonstrate the effectiveness of “classical strategies for dynamic control” on authentic cogeneration processes. These strategies are applied to several processes at the University of Connecticut’s cogeneration plant. Case studies of their applications are presented in this paper. Strategies that are applied include the following:

1) The classical SISO feedback structure

2) The First Order Plus Dead Time (FOPDT) process model

3) The Internal Model Control (IMC) correlations for PI controller tuning

4) Static feed forward with feedback trim

5) Cascade Control

Underwater Localization And Tracking Of Physical Systems, Patrick E. Carroll

Master's Theses

In this paper, we investigate the problem of localizing an underwater sensor node basedon message broadcasting from multiple surface nodes. With the time-of-arrival measurementsfrom a DSP-based multicarrier modem, each sensor node localizes itself based on the traveltime differences among multiple senders to the receiver. Using one-way message passing, such asolution can scale to accommodate a large number of nodes in a network. We consider the issuefrom not only the physical layer, but also at the node processing layer by incorporating a trackingsolution. We present simulation results as well as preliminary testing results in a swimming poolwith both stationary and moving …

Design Of A Pragmatic Test Lab For Evaluating And Testing Wireless Medical Devices For Deployment On An Integrated It Wireless Network, Allie Paquette

Master's Theses

In today’s healthcare environment, networking of medical devices is becoming more and more prevalent. There is an increasing need for mobile technology to meet clinical needs. Wireless communication is essential for allowing medical devices to be able to move with the patient, while continuing to record and communicate patient data. A traditional example is telemetry monitoring, but other examples of wireless utilization include sending ECG test results to the EMR or remotely updating the drug library on numerous IV pumps. Each wireless application has varying demands on the connectivity infrastructure and will share radio frequency (RF) spectrum resources with a …

A Comparative Study Of Total Hemoglobin Measurement Technology: Noninvasive Pulse Co-Oximetry And Conventional Methods, Jared S. Ruckman

Master's Theses

Hemoglobin can be measured on a variety of devices using different principles of operation. Noninvasive pulse CO-oximetry represents the latest development in hemoglobin measuring technology. The technology uses principles similar to pulse oximetry to measure total hemoglobin, oxyhemoglobin, reduced oxyhemoglobin, carboxyhemoglobin and methemoglobin. Similar to the introduction of pulse oximetry to the medical field, pulse CO-oximetry has been met with skepticism. Since the technology is noninvasive and provides continuous monitoring in comparison to invasive and discrete techniques used in other methods, CO-oximetry purportedly provides an advantage in patient care. The purpose of this research is threefold: (a) to review the …

Finite Element Analysis Of The Effect Of Low-Speed Rear End Collisions On The Medial Meniscus, Daniel J. Tichon

Master's Theses

Low-speed, rear end vehicle collisions can inflict soft tissue damage to the passenger’s knees, especially the medial meniscus, which has been previously unexplained in published literature. It is difficult to determine if factors such as age or other injury was the primary cause of the injury or if the accident acutely caused the meniscal tear. Rear end collisions may produce a combination of compressive loading and torque about the knee that will injure the medial meniscus during the initial impact and the rebound phase. The purpose of this study is to determine if it is possible for rear end low-speed …

Development & Application Of The Transportation Index For Sustainable Places (Tisp), Jason Zheng

Master's Theses

The purpose of transportation systems go beyond the movement of people and goods. These systems shape the natural and built environment which subsequently affects social and economic interactions. However, conventional metrics typically only address the mobility aspect of transportation via measures such as level of service and congestion. Metrics are needed to evaluate the broader impacts of transportation.

This work describes the Transportation Index for Sustainable Places (TISP), a performance metric designed to assess the sustainability of transportation systems with respect to environmental, social, and economic outcomes. The development of the TISP was guided through literature review focused on understanding …

The Impacts Of Road Capacity Removal, Jason E. Billings

Master's Theses

The road infrastructure of North America is aging, and many governments are faced with a critical decision: do we repair or remove freeways from our urban centers? Freeway repair is exceptionally expensive, but removing a freeway is widely seen as a risky venture which may result in negative traffic effects. Therefore, it is necessary to gain a clearer understanding of how removing road capacity effects traffic distribution. Three freeway segments were ultimately selected for case study analysis: two in San Francisco and one in Milwaukee. This analysis consisted of identifying changes in the traffic volumes and volume-capacity (V/C) ratios in …