Engineering Commons^™

Tree Localization In A Plantation Using Ultra Wideband Signals, Akshat Verma

The Journal of Purdue Undergraduate Research

No abstract provided.

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

Comparative Evaluation Of Investigation Methods For Estimating The Load-Dependent State Of Charge And End Of Discharge Of A Multirotor Uav Battery, Hanna Dibbern, Morten Roßberg, Claudia Werner

Journal of Aviation Technology and Engineering

As the scope of multirotor unmanned aerial vehicle (UAV) applications increases, more attention is being paid to UAV energy requirements, which vary depending on the mission profile. To obtain accurate information about the UAV battery during flight, the idea of a digital twin including a battery state estimation model is promising. For battery state estimation, a Kalman filter combination is the preferred approach in the literature. Comparing different Kalman filters, the unscented Kalman filter has a more accurate estimation for nonlinear systems compared to the extended Kalman filter. In the application of UAV flight with load-dependent flight missions, the comparison …

Extracting Edges In Space And Time During Visual Fixations, Lynn Schmittwilken, Marianne Maertens

MODVIS Workshop

No abstract provided.

Full-Scale Testing Of Power Transfer Roadways, Oscar Moncada

Purdue Road School

A dynamic wireless power transfer roadway refers to the integration of wireless power transfer technology into a new and existing road infrastructure to provide motive power, battery charging, or both to electric vehicles. The objective of this presentation is to evaluate the mechanical and thermal performance of the system when incorporated in both flexible and rigid pavement structures.

Digital Platform To Aid Youth Substance Abuse Prevention, Bingxuan Li

Discovery Undergraduate Interdisciplinary Research Internship

Through research and interviews, I discovered that a significant portion of students in Africa become drug addicts and drop out of school. The solution is to prevent youth substance abuse before it happens, so that more students in Africa may continue their education. With the strong motivation of expanding African student involvement in higher education, I participated DURI program to increase higher education rates in the Democratic Republic of the Congo, Africa. The local government is establishing rehabilitation centers to monitor at-risk students and prevent youth substance abuse, but due to extremely limited resources, it is critical to evaluate the …

Redefining Research In Nanotechnology Simulations: A New Approach To Data Caching And Analysis, Darin Tsai, Alan Zhang, Aloysius Rebeiro

The Journal of Purdue Undergraduate Research

No abstract provided.

Ethics In Engineering Education: Is Abet Enough?, Alyssa Delouise

The Journal of Purdue Undergraduate Research

No abstract provided.

Synthetic Aperture Radar Imaging, Srivatsan Ravichandran, Okan Ersoy

Department of Electrical and Computer Engineering Technical Reports

Simulation programs are used to locate the positions of the input target points and generate a 2D SAR image with the Range Migration Algorithm. Using the same methodology, we can create a scene geometry using the concept of Point cloud and run the simulation program to generate raw SAR data.

Natural Language Processing For Novel Writing, Leqing Qu, Okan Ersoy

Department of Electrical and Computer Engineering Technical Reports

No abstract provided.

Eye-Gaze-Controlled Hmds And Mfd For Military Aircraft, Lrd Murthy, Abhishek Mukhopadhyay, Somnath Arjun, Varshith Yelleti, Peter Thomas, Dilli Babu Mohan, Pradipta Biswas

Journal of Aviation Technology and Engineering

Eye-gaze-controlled interfaces allow the direct manipulation of a graphical user interface by looking at it. This technology has great potential in military aviation, in particular, operating different displays in situations where pilots’ hands are occupied with flying the aircraft. This paper reports studies on analyzing the accuracy of eye-gaze-controlled interfaces inside aircraft undertaking representative flying missions. We report that using eye-gaze-controlled interfaces, pilots can undertake representative pointing and selection tasks at less than two seconds on average in a transport aircraft. Further, we analyzed the accuracy of eye-gaze-tracking glasses under various G load factors and analyzed the failure modes. We …

Creating Reel Designs: Reflecting On Arthrogryposis Multiplex Congenita In The Community, Iris Layadi

Purdue Journal of Service-Learning and International Engagement

Because of its extreme rarity, the genetic disease arthrogryposis multiplex congenita (AMC) and the needs of individuals with the diagnosis are often overlooked. AMC refers to the development of nonprogressive contractures in disparate areas of the body and is characterized by decreased flexibility in joints, muscle atrophy, and developmental delays. Colton Darst, a seven-year-old boy from Indianapolis, Indiana, was born with the disorder, and since then, he has undergone numerous surgical interventions and continues to receive orthopedic therapy to reduce his physical limitations. His parents, Michael and Amber Darst, have hopes for him to regain his limbic motion and are …

Designing A Computer-Vision Application: A Case Study For Hand-Hygiene Assessment In An Open-Room Environment, Chengzang Zhong, Amy R. Reibman, Hansel A. Mina, Amanda J. Deering

Department of Food Science Faculty Publications

Hand-hygiene is a critical component for safe food handling. In this paper, we apply an iterative engineering process to design a hand-hygiene action detection system to improve food- handling safety. We demonstrate the feasibility of a baseline RGB-only convolutional neural network (CNN) in the restricted case of a single scenario; however, since this baseline system performs poorly across scenarios, we also demonstrate the application of two methods to explore potential reasons for its poor performance. This leads to the development of our hierarchical system that incorporates a variety of modalities (RGB, optical flow, hand masks, and human skeleton joints) for …

Radiation Effects On Space Solar Cells At Various Earth And Jupiter Orbital Altitudes, Naazneen Rana

Discovery Undergraduate Interdisciplinary Research Internship

Solar cells are used as the primary power source for earth-orbiting satellites and as a primary/secondary power source for various missions within the solar system. However, high energy particles from the sun, planetary magnetospheres, and the galaxy can affect the performance and life expectancy of the space solar cell and associated power systems. As the interests for interplanetary travel and the exploration of planets within our solar system increase, the need to understand a device’s performance within a particular planet’s environment is necessary. Therefore, this study will analyze the performance of space solar cells, particularly the SolAero IMM-α, at various …

Real Work With Real Consequences: Enlisting Community Energy Engineering As An Approach To Envisioning Engineering In Context, Michelle E. Jordan, Steve Zuiker, Wendy Wakefield, Mia Delarosa

Journal of Pre-College Engineering Education Research (J-PEER)

This study describes an illustrative case study from a year-round program that positions middle and high school youth to explore the social value of energy systems in their homes, schools, and neighborhoods. Designed to center existing youth assets, interests and values, Community Energy Engineering (CEE) frames engineering as a tool that students can enlist in order to understand and interrogate their local socio-energy system while also acting to transform it. CEE partners with Title 1 schools in Latino/a neighborhoods in the U.S. southwest. CEE situates youth community-based solar energy innovation projects as consequential, evolving in and with historically contingent engineering …

Changing The Process In Educational Field And Air Navigation Through Advances In Hologram Technology, Camilo Fernandez Sr.

Journal of Aviation Technology and Engineering

The objective of this piece is to propose reasons that change the way air traffic controllers and others learn and work in air navigation, but also how they can improve workloads, due to the implementation of holographic radar. This research also aims to describe how this could reduce the cognitive load of an operator, thanks to the improvement of visual perspective and capacity of analysis, in order to more easily control an aircraft.

Seeing that the visual facilitation is well known, radar is able to represent in three dimensions and in detail that which could not previously be perceived. This …

Risk Management Decision Making For Security And Trust In Hardware Supply Chains, Zachary A. Collier, Thomas L. Polmateer, James H. Lambert

CESUN Conference

Modern cyber-physical systems are enabled by electronic hardware and embedded systems. The security of these sub-components is a concern during the design and operational phases of cyber-physical system life cycles. Compromised electronics can result in mission-critical failures, unauthorized access, and other severe consequences. As systems become more complex and feature greater connectivity, system owners must make decisions regarding how to mitigate risks and ensure resilience and trust. This paper provides an overview of research efforts related to assessing and managing risks, resilience, and trust with an emphasis on electronic hardware and embedded systems. The research takes a decision-oriented perspective, drawing …

Human Body–Electrode Interfaces For Wide-Frequency Sensing And Communication: A Review, Kurian Polachan, Baibhab Chatterjee, Scott Weigand, Shreyas Sen

Department of Electrical and Computer Engineering Faculty Publications

Several on-body sensing and communication applications use electrodes in contact with the human body. Body–electrode interfaces in these cases act as a transducer, converting ionic current in the body to electronic current in the sensing and communication circuits and vice versa. An ideal body–electrode interface should have the characteristics of an electrical short, i.e., the transfer of ionic currents and electronic currents across the interface should happen without any hindrance. However, practical body–electrode interfaces often have definite impedances and potentials that hinder the free flow of currents, affecting the application’s performance. Minimizing the impact of body–electrode interfaces on the application’s …

Verifying Spi With Universal Verification Methodology (Uvm), Yueting Zhao

Discovery Undergraduate Interdisciplinary Research Internship

Nowadays, system-on-chips (SoC) are widely applied to perform any computing task. They are used in personal computers, embedded systems, and mobile computing. During the design of an SoC, testing and debugging play important roles to ensure the correct functionalities before sending the chip for fabrication. There are several different verification methods, among which the Universal Verification Methodology (UVM) is the one we are using. It is written in SystemVerilog and is an efficient method for verifying digital designs that is standardized in the industry. Following UVM, we can create scalable and well-formatted testbenches that can be reused for other components …

Experimental And Design Effort To Understand A Wider Sense Of Memory Application, Nicholas Zogbi

Discovery Undergraduate Interdisciplinary Research Internship

Magnetic Random-Access Memory (mRAM) is a more efficient, smaller, and less power-hungry memory device that can be implemented into computers. Using Magnetic Tunnel Junctions (MTJ) we store memory in devices that are far less complex than other types of memory with just the use of currents and magnetic fields changing the data.

In collaboration with the System-on-Chip Extension Technologies (SoCET) and Computing Advances by Probabilistic Spin Logic (CAPSL) groups, we have been working on using the characteristics of MTJs to characterize available commercial mRAM devices so we can have a better understanding of the thresholds of the MTJs. The SoCET …

A Survey On Subsurface Signal Propagation, Usman Raza, Abdul Salam

Faculty Publications

Wireless Underground Communication (WUC) is an emerging field that is being developed continuously. It provides secure mechanism of deploying nodes underground which shields them from any outside temperament or harsh weather conditions. This paper works towards introducing WUC and give a detail overview of WUC. It discusses system architecture of WUC along with the anatomy of the underground sensor motes deployed in WUC systems. It also compares Over-the-Air and Underground and highlights the major differences between the both type of channels. Since, UG communication is an evolving field, this paper also presents the evolution of the field along with the …

A Note From The Editor, Daphne Fauber

Ideas: Exhibit Catalog for the Honors College Visiting Scholars Series

This piece is a letter from Daphne Fauber, the editor of this issue of Ideas. In the letter, the editor introduces the work of Dr. Paschalis Gkoupidenis as well as the moment in time in which his Visiting Scholars talk occurs.

A Statistical Impulse Response Model Based On Empirical Characterization Of Wireless Underground Channel, Abdul Salam, Mehmet C. Vuran, Suat Irmak

Faculty Publications

Wireless underground sensor networks (WUSNs) are becoming ubiquitous in many areas. The design of robust systems requires extensive understanding of the underground (UG) channel characteristics. In this paper, an UG channel impulse response is modeled and validated via extensive experiments in indoor and field testbed settings. The three distinct types of soils are selected with sand and clay contents ranging from $13\%$ to $86\%$ and $3\%$ to $32\%$, respectively. The impacts of changes in soil texture and soil moisture are investigated with more than $1,200$ measurements in a novel UG testbed that allows flexibility in soil moisture control. Moreover, the …

High Wind Alerts: A System Created With Observations From The X-Band Teaching And Research Radar, Lauren Warner

The Journal of Purdue Undergraduate Research

Following the August 13, 2011, Indiana State Fair stage collapse tragedy, caused by a wind gust from an approaching thunderstorm, Purdue University enforced a wind speed restriction of 30 mph (13 m s-1) for tents at outdoor events. During these events, volunteers stand outside with handheld anemometers, measuring and reporting when the wind speeds exceed this limit. In this study, we report testing of a new system to automate high-wind alerts based on observations from a Doppler radar, the X-band Teaching and Research Radar (XTRRA), near Purdue’s campus. XTRRA scans over campus at low elevations approximately every 5 minutes. Using …

Navigating In Numerous Video Data: User Interface Design For An On-Camera Video Analytics Engine, Sabriya Maryam Alam

The Journal of Purdue Undergraduate Research

Video analytics powered by artificial intelligence shows high promise in making our society smarter. Harnessing large amounts of video data, however, requires the development of processing systems demonstrating high performance and high efficiency. To this end, this work has contributed to a video analytics system powered by artificial intelligence for object detection and recognition. Rather than streaming all the video frames to the cloud, the system analyzes images on-camera and only returns those of interest to the cloud. This edge analytics research-grade software is available, but it lacks a simple web interface for general use by scientists, engineers, and other …

Electromagnetic Characteristics Of The Soil, Abdul Salam, Usman Raza

Faculty Publications

The electromagnetic characteristics of the soil are discussed in this chapter. The characteristics of porous bedrock, soil medium, and impacts of rain attenuations are also presented. The models of dielectric soil properties are studied with a rigorous focus on the constitutive parameters of subsurface soil medium. Moreover, the permittivity and wavenumber in soil are explained. In addition, the frequency-dependent dielectric properties such as dispersion in soil, absorption characteristic, and penetration depth versus frequency are reviewed. Furthermore, the effective permittivity of soil–water mixture for through-the soil-propagation mechanism is analyzed thoroughly.

Underground Phased Arrays And Beamforming Applications, Abdul Salam, Usman Raza

Faculty Publications

This chapter presents a framework for adaptive beamforming in underground communication. The wireless propagation is thoroughly analyzed to develop a model using the soil moisture as an input parameter to provide feedback mechanism while enhancing the system performance. The working of array element in the soil is analyzed. Moreover, the effect of soil texture and soil moisture on the resonant frequency and return loss is studied in detail. The wave refraction from the soil–air interface highly degrades the performance of the system. Furthermore, to beam steering is done to achieve high gain for lateral component improving the UG communication. The …

Signals In The Soil: An Introduction To Wireless Underground Communications, Abdul Salam, Usman Raza

Faculty Publications

In this chapter, wireless underground (UG) communications are introduced. A detailed overview of WUC is given. A comprehensive review of research challenges in WUC is presented. The evolution of underground wireless is also discussed. Moreover, different component of UG communications is wireless. The WUC system architecture is explained with a detailed discussion of the anatomy of an underground mote. The examples of UG wireless communication systems are explored. Furthermore, the differences of UG wireless and over-the-air wireless are debated. Different types of wireless underground channel (e.g., In-Soil, Soil-to-Air, and Air-to-Soil) are reported as well.

Modulation Schemes And Connectivity In Wireless Underground Channel, Abdul Salam, Usman Raza

Faculty Publications

In this chapter, a thorough treatment of the modulation schemes for UG Wireless is presented. The effects of soil texture and water content on the capacity of multi-carrier modulation in WUC are discussed. The multi-carrier capacity model results are analyzed. Moreover, the underground MIMO design for underground communications is explained thoroughly. An analysis of medium access in wireless underground is done as well. Furthermore, the soil properties are considered for cross-layer communications of UG wireless. The performance analysis of traditional modulation schemes is also considered. The soil moisture-based modulation approach is also explored in this chapter. The connectivity and diversity …

Underground Wireless Channel Bandwidth And Capacity, Abdul Salam, Usman Raza

Faculty Publications

The UG channel bandwidth and capacity are vital parameters in wireless underground communication system design. In this chapter, a comprehensive analysis of the wireless underground channel capacity is presented. The impact of soil on return loss, bandwidth, and path loss is discussed. The results of underground multi-carrier modulation capacity are also outlined. Moreover, the single user capacity and multi-carrier capacity are also introduced with an in-depth treatment of soil texture, soil moisture, and distance effects on channel capacity. Finally, the chapter is concluded with a discussion of challenges and open research issues.