Engineering Commons^™

Numerical Study Of Cone Penetration In Calcareous Sands: Investigating Cone Tip Resistance Correction Factors For Crushable Soils, Stephanie Michelle Hyder

Dissertations and Theses

The cone penetration test (CPT) is used to characterize the behavior and properties of soils, including the susceptibility to earthquake liquefaction triggering. The cone tip resistance relates to liquefaction susceptibility through relative density, where relative density is closely related to both cone tip resistance and liquefaction susceptibility. Currently, published methods of estimating liquefaction potential (i.e., cyclic resistance ratio) are based on silica sands and do not properly characterize calcareous sands. The measured cone tip resistance in calcareous sands is lower than in silica sands at the same relative density; this difference is generally attributed to the higher compressibility of calcareous …

Uncertainty Quantification Of Live Load Effect In Buried Rc Box Culverts, Mohd Firoj

Dissertations and Theses

Although buried and mostly invisible to the traveling public, bridge-sized culverts (i.e., culverts with span around or longer than 20 ft) account for a large proportion of state-managed bridges. As per Oregon Department of Transportation inventory, there are approximately 35,000 culverts in the state highway system. Among them, 10,862 are in poor conditions and need to be analyzed for load rating purposes. The prediction and understanding of live load effects in culverts are crucial to the design, evaluation, and life-cycle maintenance of culverts. These live load effects include maximum bending moments and shear forces at different critical cross sections.

This …

Probability Distribution Fitting For Censored Data: A Practical Guide For Survival Analysis Of Nbi Data For Concrete Bridge Decks In Oregon, Asmaa Almeshaileh

Dissertations and Theses

Many sophisticated statistical models and analyses have been proposed to analyze datasets derived from the national bridge inventory (NBI). These objectives range from creating an understanding of the factors that drive the deterioration of bridge members to providing agencies with quantitative information for their maintenance and repair decisions. As these models become increasingly sophisticated and difficult to comprehend and implement, practicing engineers and owners are less likely to use them. Often, however, grouping data intuitively, for example, per a select structure type or condition rating and analyzing them using prescriptive statistics such as distribution fitting, does not only lie in …

A Bayesian Network-Based Methodology For Improved Bridge Load Rating And Asset Management, Jeffery Mark Roberts

Dissertations and Theses

From the day a new structure is made available for use, to the day that the structure is no longer able to fulfill an intended purpose, structural safety is a vital interest. Managing a portfolio of structures can be a difficult undertaking for an asset manager, particularly if different types of structures are being maintained. The goal is to manage assets in the most efficient manner which can be influenced by, at a minimum, safety and financial concerns.

A potential tool for an asset manager or owner is the use of Bayesian Networks (BNs). When a BN is used to …

Load Effects Of Truck Platooning On Existing Bridges In Oregon, Patricia Oleson

Civil and Environmental Engineering Master's Project Reports

Truck Platooning (TP) involves managing multiple trucks closely together to reduce aerodynamic drag. While TP offers benefits such as fuel savings, emission reductions, and enhanced safety, it raises concerns for existing infrastructure. This study reviews literature on TP and conducts bridge analyses comparing representative truck platoon configurations allowed under Oregon law with current truck loadings. It also explores the effects of truck head spacing and bridge span lengths, utilizing the research results to calculate rating factors using real-world case studies. The objective is to identify truck platoon configurations that may exceed acceptable load levels for Oregon bridges. The findings will …

Uncertainty Quantification And Fragility Development Of Deteriorating Rc Bridge Piers, Ayush Bhandari

Dissertations and Theses

Corrosion can reduce structural capacity and increase the risk of bridge damage/failure under extreme events. The impact of corrosion on seismic fragility of bridges has been well studied. However, the methodology used in most existing studies requires detailed information on the structural design and condition of a bridge, which is a major hindrance in conducting seismic risk assessment for a large population of bridges. Furthermore, existing studies do not adequately address the time-dependency of uncertainties associated with fragility curve development. This study presents a methodology to generate time-dependent seismic fragility curves for deteriorating highway bridges based only on the limited …

Design And Evaluation Of A Prototype Low-Damage Beam-Column Connection For Mass Timber Moment Frames, Samuel D. Richmann

Civil and Environmental Engineering Master's Project Reports

A moment-resisting, beam-column connection for mass timber moment frames was developed, designed and tested. The design was intended to limit damage to the timber members by creation of a ductile failure mechanism in steel U-shaped flexural plates (UFPs). Using design equations developed by previous research on UFPs by Baird, et al. (2014) as well as accepted design practices from the NDS and AISC, the components were sized to eliminate failure in the timber. The connection was tested using a quasi-static lateral displacement method following the procedure outlined in section K2.4b of AISC 341-16. A vertical load was placed on the …

Seismic Performance Design Criteria Of Existing Bridge Bent Plastic Hinge Region And Rapid Repair Measures Of Earthquake Damaged Bridges Considering Future Resilience, A K M Golam Murtuz

Dissertations and Theses

The main objective of this research was to evaluate the seismic performance of existing sub-standard reinforced concrete (RC) bridge column-spread footing subassemblies and to quantify the material strain limits through a full-scale experimental program. A total of six column-footing test specimens with pre-1990 construction details were subjected to reverse cyclic lateral loading, utilizing a conventional three-cycle symmetric loading protocol and a protocol representing the demands expected from a CSZ earthquake. Additionally, the tests were designed so that variable axial loading could be applied to simulate the secondary load effects experienced during an earthquake in a column that is part of …

Determinant Factors Of Bicyclist Injury Severity At Signalized And Unsignalized Intersections, Apy Das

Dissertations and Theses

Bicycling is becoming increasingly popular in Oregon and the US in general due to its environment friendliness as well as health benefits. With Oregon's population projected to increase by more than 30% over the next 30 years, improving the safety of the transportation network for persons on bicycles is important. In Oregon, majority of the bicyclist crashes occur at intersections. This thesis seeks to identify the determinant factors that significantly impact bicyclist crash injury severity at intersections. A mixed logit framework that accounts for any unobserved heterogeneity in the data and allows the estimated parameters to randomly vary across observations …

Undrained Cyclic Loading Of Low Plasticity Silty Soils In The Pacific Northwest Using Laboratory And Field Cyclic Shear Testing, Angelica Melissa Preciado Reyes

Dissertations and Theses

The cyclic behavior of a fine-grained low plasticity silty soil (plasticity index of approximately 15) at a site in Portland, Oregon, is characterized using a field and laboratory cyclic shear test program. The field cyclic tests were performed using the NHERI@UTexas large mobile shakers T-Rex and Rattler. The laboratory tests were performed using resonant column torsional shear and cyclic direct simple shear devices. This testing program's results were used to evaluate the soil's potential to develop excess pore water pressure with cyclic shear strains ranging from 0.00001% to 3%. The laboratory cyclic test results are compared against field cyclic test …

Kinematic Demands On Pile-Supported Wharves Due To Liquefaction-Induced Lateral Ground Deformations, Thomas John Torkelson Ii

Dissertations and Theses

Kinematic demands from lateral soil deformations can be a major cause of damage to maritime and highway transportation structures such as wharves, ports, and bridges. Data from five centrifuge tests on pile-supported wharves were used to evaluate the accuracy of Newmark Sliding Block Analysis in estimating the kinematic demands on piles. The piles in the centrifuge tests were subjected to varying degrees of liquefaction-induced lateral ground deformations. Pile-pinning effects were included in the analysis by incorporating the lateral pile resistance in the limit-equilibrium slope stability analysis. The results of the analysis have shown that the median Newmark displacements better estimated …

Field Trials And Long-Term Monitoring Of Microbially-Induced Desaturation For The Treatment Of Liquefiable Silty Soils, Kayla Rae Sorenson

Dissertations and Theses

Earthquake liquefaction hazards in silty soils are a critical problem in Portland, Oregon, and other areas around the world. This is a particular problem for existing facilities founded on liquefiable soils, for which there exists no cost-effective liquefaction mitigation solution at the present time. It is essential from both a seismic safety and a seismic resilience perspective to be able to mitigate potentially liquefiable soils underneath existing structures, and to do so in a cost-effective manner. Recent studies suggest that liquefaction mitigation using microbially-induced desaturation (MID) may provide this capability.

The objective of MID is to reduce earthquake-induced excess pore …

Using Quantitative Stereology On High Resolution Sem Images To Estimate Diatom Percentages, Ariadna Covarrubias Ornelas

Dissertations and Theses

Diatoms are single-celled organisms of various shapes and sizes typically found in aquatic environments. When diatoms die, the organic material decomposes, and the outer skeletons (i.e., frustules) settle and accumulate as sedimentary deposits. These soils, called diatomaceous soils, exhibit nontraditional behavior since the diatom particles are typically hollow skeletons composed of amorphous silica with intricately patterned and abrasive surfaces. Recent studies have shown that diatomaceous soils are challenging geomaterials since even a small percentage of diatom particles will notably affect engineering behavior. Furthermore, laboratory studies on diatomaceous soil mixtures have demonstrated that many engineering soil properties depend on the percentage …

Distributionally Robust Optimization Utilizing Facility Location Problems, Elijah Kling

Civil and Environmental Engineering Undergraduate Honors Theses

Facility location problems are used in widespread application in transportation, freight, supply chain, and logistics problems. Models can be developed as deterministic, where all parameters are known, or robust, where a parameter has uncertainty. This thesis explores a new method for developing robust formulation and compares the implications of assuming values for this uncertain parameter. Two models are solved, and both are compared against their deterministic counterparts using numerical analysis. By manipulating the input parameters and considering real world implications of the solutions, either the robust or deterministic can show better performance.

Maximum Coverage Facility Location Drone Routing Problem With Multiple Trip Stops, Marie Roza

Civil and Environmental Engineering Undergraduate Honors Theses

Integer linear optimization can be used to formulate routing problems as models to find optimal solutions given a set of inputs and constraints. In this research, Chauhan et al.'s publication, "Maximum coverage capacitated facility location problem with range constrained drones," is expanded upon by modeling a facility location problem with two-to-one drone deliveries. The model analyzes a set of potential facilities that are available to meet the demands of a set of demand points. The drone delivery routes are modeled with the assumption that each opened facility is assigned one drone that can fulfill up to two demand points’ demands …

Numerical Simulation Of Continuous Cone Penetration And Interpretation Of Cptu Dissipation Tests, Andrew Phillip Eugene Huffman

Dissertations and Theses

The piezocone penetration test (CPTu) is a commonly used method of geotechnical site investigation. The CPTu is especially useful because it provides a nearly continuous data profile of in-situ soil behavior, which can be correlated to useful engineering parameters. However, limitations exist for interpretation of geotechnical properties from CPTu data and for numerical analysis of cone penetration problems. The research presented in this thesis examines interpretation of coefficient of consolidation from CPTu dissipation test data and implementation of an algorithm to advance numerical simulation of cone penetration problems. This thesis presents analysis of CPTu dissipation responses from field-measured and numerically …

Use Of Carbon Fiber Reinforced Polymer (Cfrp) Including Sheets, Rods, And Ropes In Strengthening And Repairing Long Reinforced Concrete Columns, Yasir Matloob Saeed

Dissertations and Theses

The use of FRP materials in strengthening and repairing of reinforced concrete (RC) structures has increased in the past two decades. Recently, FRP materials have become one of the most used materials in rehabilitation engineering. For seismic retrofitting of RC structures, usually the process involves strengthening or repairing the vertical support elements of the buildings or bridges. Several studies focused on the use of FRP materials in strengthening and repairing RC columns. Externally bonded (EB) FRP sheets or laminates and near-surface-mounted (NSM) FRP rods have been used for enhancing the strength and ductility of RC columns. Although glass FRP (GFRP) …

The Seasonal Effects Of Photovoltaic Cells On Sedum Eco Roof Substrate Moisture, Brook M. Thompson

University Honors Theses

This paper investigates a combined PV eco roof system and analyzes the soil moisture levels in front of the panels and directly underneath the PV Cells on an experimental ecoroof platform in Portland, Oregon. The purpose of the study was to examine how PV Cells create differences in the moisture level of the soil on the ecoroof. Four moisture sensors were set in different quadrants in four experimental testbeds, and the moisture level data was recorded from October 18^th, 2018 to September 10^th, 2019. The study found that in with heavy rainfall, the front of the …

Ultrasonic Coda Wave Comparison For Quality Control Of Manufactured Parts: Proof Of Feasibility, Alexei Marin-Cortes

Civil and Environmental Engineering Master's Project Reports

Manufactured parts are a staple of modern urban life, visible in homes (e.g., kitchen appliances), offices (e.g., printers), the automobile and aerospace industries (e.g., body parts), and more. This M.S. project intended to determine whether ultrasonic testing could be used in a simple and rapid manner to perform quality control of manufactured parts. Ultrasonic testing is employed for this purpose using two surface-coupled transducers, one being a transmitter and the other one a receiver. An ultrasonic pulse, which is generated by the transmitting transducer, propagates through the part, collecting information about material and geometry, as well as potential unwanted features. …

Dynamic Response Of Highway Bridge Superstructures Subjected To Wave Action: Experimental Analysis And Numerical Modeling, Alaa Waleed Hameed

Dissertations and Theses

Bridges are critical lifeline components of the infrastructure network, enabling economies to function under normal conditions and disaster response and recovery missions to take place after extreme events. Therefore, ensuring satisfactory performance increases community resilience and minimizes both human and economic losses. Coastal bridges, which are the focus of this PhD dissertation, are vulnerable to coastal storms. High failure rates of these bridges during two major hurricane events in the mid-2000s have spurred research activities to better understand the wave-induced forces of coastal bridges.

This PhD research represents a continuation effort to build, implement, and introduce new fundamental concepts and …

Robust Maximum Flow Network Interdiction Problem, Darshan Rajesh Chauhan

Dissertations and Theses

In this thesis, a maximum flow-based network interdiction problem considering uncertainties in arc capacities and interdiction resource consumption is solved. The problem consists of two entities with opposing objectives: the goal of the adversary is to maximize the flow of illicit drugs through the network, while the goal of the interdictor is to minimize the maximum flow by completely interdicting arcs given a specified amount of resources. Lack of complete information about the usage patterns of the transportation network by the adversary results in an uncertain estimate of arc capacity and resources required for interdiction by the interdictor. To account …

Concrete Bridge Deck Performance Data And Metrics For The State Of Oregon, Jael Wettach-Glosser

Dissertations and Theses

Bridge decks are a critical element of a bridge that support and distribute vehicle loads to the superstructure. Because of the requirements of this role, bridge decks are exposed to severe conditions that typically lead to structural deficiency in bridges which is both costly and disruptive. Therefore, to keep bridges and highways in good repair, developing optimal preservation decisions for concrete bridge decks is key. In order to develop effective performance monitoring and preservation schedules, the parameters affecting bridge deck deterioration need to be better understood.

With guidance from the literature and Oregon Department of Transportation (ODOT) personnel, two datasets …

Evaluation Of Low And High Frequency Dynamic Response For Condition Assessment Of Reinforced Concrete Structures, Ali Hafiz

Dissertations and Theses

Concrete is widely used for civil infrastructure structures and they experience deterioration and degradation due to aging, increases in the traffic loads, harsher environmental conditions, use of deicing chemicals, etc. Therefore, evaluating the integrity of reinforced concrete structures has become of increasing interest for infrastructure owners and managers. A number of non-destructive testing (NDT) and structural health monitoring (SHM) methods have been developed in recent decades to aid in evaluating structures and provide input for asset management. One family of these methods uses the dynamic response of a structural member: stress waves (high frequency) and structural vibrations (low frequency). Both …

Test Setup Design And Cyclic Evaluation Of Rocking Clt Wall And Floor Restoring Force Lateral System, Aaron Davis Smith

Civil and Environmental Engineering Master's Project Reports

The introduction of the demand for mass timber buildings in areas with seismic hazards has called for new lateral systems. Lateral systems in mass timber building typically utilize a rocking shear wall with post-tensioned rods to provide system re-centering. These post-tensioned rods add axial load to the shear wall and potentially endure long term creep affects. Mass Timber buildings consist of cross laminated (clt) shear walls and floor slabs along with glulam beams. The flexural capacity of the CLT floor slabs along with dead load can provide an alternative source for the restoring force. This project developed a test setup …

Seismic Behavior Of Screen Grid Core Insulated Concrete Form Walls, Anwer Sabah Mohammed Mohammed

Dissertations and Theses

The use of the insulated concrete form (ICF) walls in residential buildings has increased over the past few decades. Much research has been conducted to evaluate the lateral strength of these walls by applying monotonic and cyclic loadings. In the current study, full-scale shake table experiments were employed to evaluate the in-plane behavior of four screen grid insulated concrete form (SGICF) walls. The first two wall specimens utilized dry fit insulated form blocks made from recycled expanded polystyrene granules that were bonded together with cement. When stacked, the cavities in the blocks formed a grid of cores that are evenly …

Lateral Deformation Behavior Of Mass Timber Beam To Column Gravity Connection, Tyler James Williams

Civil and Environmental Engineering Master's Project Reports

A beam-to-column connection consisting of glulam beam and column and cross laminated timber floor slab was developed and experimentally evaluated for use in buildings that are expected to undergo earthquake-­­induced lateral drift. The connection utilized a passive gap closure mechanism designed to allow beam rotations during lateral drift while minimizing residual separation between the beam and the column following an earthquake. Full scale cyclic experiments were used to validate the connection’s minimal rotational stiffness and demonstrate low damage performance for lateral drifts exceeding 4.5% drift. The connection exhibited no degradation in gravity load capacity throughout the imposed lateral deformations. An …

An Analytical System For Determining Disciplinary Vocabulary For Data-Driven Learning: An Example From Civil Engineering, Philippa Jean Otto

Dissertations and Theses

Data-driven learning (DDL), an inductive teaching approach in which students learn through corpus interaction, has gained recent traction as way to teach specialized vocabulary in English for Specific Purposes (ESP) classes. There is little research, however, that addresses how to choose specialized vocabulary for teaching with DDL.

This study addressed this gap in research by exploring the potential of a three-part analytical, corpus-based system for determining vocabulary to teach with DDL for a specific context of language use. This system included (1) identifying words that were significantly more frequent in a specialized expert corpus than in a corpus of general …

Seismic Retrofit Case Study Of Reinforced Concrete Bridges With Buckling Restrained Braces, Michael K. Miotke

Civil and Environmental Engineering Master's Project Reports

Many highway bridges in Oregon have been designed with minimal considerations for seismic hazard and are in need of retrofit. Although buckling restrained braces (BRBs) are not necessarily a new concept, using them to seismically retrofit bridges is. This case study investigates the BRB retrofit concept as compared to traditional retrofit measures for a sample of typical vulnerable bridges in Oregon. The objectives of evaluating these cases were to determine the feasibility of the concept both in terms of performance as well as construction costs. This study builds on the ongoing research at Portland State University into the development of …

Seismic Evaluation Of 196kv Transformer Bushings, Joanne R. Shields

Civil and Environmental Engineering Master's Project Reports

Transformer bushings have shown to have an unsatisfactory performance during earthquakes and have therefore been chosen for further testing. How the bushings fail, and how this failure can be prevented has been analyzed. Two used 196 kV bushings made by General Electric were chosen for seismic testing at the iSTAR laboratory located at Portland State University in Portland, OR. The multiple objectives that brought about these tests were: to determine how the bushings failed due to gasket extrusion at the porcelain-flange connection and to verify that the failure was due to pure tipping and not sliding, to determine the damping …

Feasibility Determination Guide For The Road Diet Plus: A Five/Four-Lane To Two-Lane Road Diet, Michael Williams

Civil and Environmental Engineering Master's Project Reports

Road diets are a popular tool for corridor improvement. Road diets are normally defined as the conversion of a four-lane undivided road to a three-lane undivided road made up of two through lanes separated by a center two-way-left-turn-lane (known as a TWLTL). This new configuration has similar vehicular capacity, greater safety and frees up right-of-way for other uses.

This work examines the possibility of going one step, or one lane, further. What is the possibility of reducing five- or four-lane roads to two-lanes? If this is possible, what are the corridor characteristics within which this process would be feasible?

The …