Engineering Commons^™

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

Physical And Stochiometric Controls On Nutrient Uptake And Ecosystem Respiration In Contrasting Sites, Jancoba K. Dorley

Civil Engineering ETDs

Meteorological, hydrological, and biogeochemical processes naturally control stream ecosystems. These processes define the frequency and distribution of precipitation and the supply and demand of solutes and particles to support aquatic food chains through space and time. Studies have also found that stream ecosystems are also controlled by anthropogenic activities, which occur on a much shorter timescale. These anthropogenic activities affect stream ecosystems' structure and function from local to planetary changes to the environment. It is essential for scientists and engineers to understand the relationships between naturally occurring processes and those created by human activities for a better interpretation of stream …

Investigation Into The Effect Of Mixture Composition On Setting Time Of Magnesium Phosphate Cement, Autumn Broglen

Civil Engineering Undergraduate Honors Theses

Magnesium phosphate cement (MPC) is a cementitious material that is formed through an acid-base reaction between magnesia and phosphate. This reaction occurs rapidly, making MPC an appealing choice for rapid repair applications. The purpose of this project is to investigate the impact of different proportions of class F fly ash, set retarder consisting of a mixture of boric acid and dextrose, magnesium to phosphate ratio, and water/cement ratio on the initial setting time of MPC paste. Different mixtures of MPC paste were developed to vary the proportions of each constituent, and setting time of each mixture was determined using the …

Effect Of Swirl Ratio On Simulated Vortech Chamber Vortex Parameters, Samuel Kolar

Civil Engineering Undergraduate Honors Theses

A numerical simulator can use computational fluid dynamics (CFD) to model an experimental tornado-simulating chamber at Texas Tech University (known as VorTECH). Previous studies evaluating this particular CFD model have produced results that compare the touchdown swirl ratio (S_TD), core radius (r_c), maximum tangential velocity at touchdown (V_tmax @ S_TD), and height of the maximum tangential velocity (z_c) reasonably well with experimental data from the VorTECH facility. The effects of swirl ratio beyond S_TD on important vortex parameters including r_c, V_tmax, z …

Assessment Of Engineering Performance And Environmental Impacts Of High Reclaimed Asphalt Pavement (Rap) Asphalt Mixtures In Flexible Pavements, Ibrahim A.I.E. Elnaml

LSU Doctoral Dissertations

Due to the critical role of asphalt pavements in national infrastructure development, there is a pressing need to investigate more sustainable materials and approaches. The use of natural aggregates and asphalt binders in asphalt pavement presents sustainability challenges due to the depletion of finite resources. Recycling Asphalt Pavement (RAP) offers a promising sustainable solution by substituting virgin aggregates and asphalt binders with recycled ones. However, increasing RAP contents in asphalt mixtures (>25%) can lead to premature cracking, insufficient durability, and limited longevity due to the presence of aged RAP-asphalt binder. To address these concerns, the application of novel recycling …

Safety Investigation Of Crash Rates During Hurricane Evacuations, Amelia K. Lawson

Doctoral Dissertations and Master's Theses

This study aimed to investigate crash rates across four distinct periods—evacuation, re-entry, emergency, and non-emergency—during Hurricanes Matthew (2016), Irma (2017), and Michael (2018). A notable gap in existing research pertains to understanding crash rates during these critical phases of hurricane events. By addressing this gap, this research contributes to a deeper comprehension of evacuation transportation safety. The methodology employed ArcMap to construct an interactive map for data collection, encompassing key variables such as the number of crashes, traffic volumes, duration of each period under analysis, and roadway segment lengths for each hurricane. Evaluating the crash rate per million vehicular miles …

Numerical Study Of Cone Penetration In Calcareous Sands: Investigating Cone Tip Resistance Correction Factors For Crushable Soils, Stephanie Michelle Hyder

Dissertations and Theses

The cone penetration test (CPT) is used to characterize the behavior and properties of soils, including the susceptibility to earthquake liquefaction triggering. The cone tip resistance relates to liquefaction susceptibility through relative density, where relative density is closely related to both cone tip resistance and liquefaction susceptibility. Currently, published methods of estimating liquefaction potential (i.e., cyclic resistance ratio) are based on silica sands and do not properly characterize calcareous sands. The measured cone tip resistance in calcareous sands is lower than in silica sands at the same relative density; this difference is generally attributed to the higher compressibility of calcareous …

Developing And Forecasting The Egyptian Construction Cost Index, Mayada Elsaied

Theses and Dissertations

Accurate cost estimation is pivotal for the success of construction projects, yet the industry grapples with challenges related to cost overruns. Uncertainties and unforeseen variables often introduce discrepancies, particularly during the planning phase. Economic changes, considered uncontrollable risks, significantly influence these fluctuations. Various research endeavors have quantified the impact of economic conditions on construction costs, emphasizing the correlation between economic indicators and project expenses. Addressing these challenges, the Construction Cost Index (CCI), a tool introduced by Engineering News Record (ENR), accurately delineates the correlation between economic changes and construction costs. Despite its global efficacy, an Egyptian Construction Cost Index is …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Laboratory Evaluation Of Warm Mix Additives At Lower Than Traditional Compaction Temperatures, Abdelrahman Mahmoud Waheish Ali

Theses and Dissertations

The study aims to evaluate the impact of warm mix additives (WMA) on the rheological and performance properties of asphalt binders and mixtures. For this purpose, PG 76-28 and PG 58-28 were obtained with one organic (Sasobit Redux) and three chemical WMA (Rediset, Evotherm, and Zycotherm). All WMA-modified asphalt binders were aged at three different aging levels. Laboratory tests such as performance grade (PG), critical temperature differential (ΔTc), asphalt binder cracking device (ABCD), linear amplitude sweep test (LAS), and Fourier transform infrared spectroscopy (FTIR) were performed. In addition to the binder testing plan, this study also evaluated the impact of …

Low-Shrinkage Fiber-Reinforced Concrete For Infrastructure Construction And Rehabilitation, Jingjie Wei

Doctoral Dissertations

"The aim of this study is to develop two classes of low-shrinkage high-performance concrete (HPC): fiber-reinforced super workable concrete (FR-SWC) for infrastructure construction and fiber-reinforced self-consolidating concrete (FR-SCC) for repair applications. HPC with excess content of shrinkage mitigation materials (SMMs), including shrinkage-reducing admixture (SRA), superabsorbent polymer (SAP), and expansive agent (EA) has a detrimental effect on mechanical performance. These classes of HPC were optimized to reduce shrinkage, enhance mechanical properties, and improve durability. The effect of fiber type (macro synthetic fiber, MSF; 5D steel fiber, 5D; 80% 3D + 20% short steel fibers; STST), SMMs, and plastic viscosity on bond …

Comprehensive Investigation Of Using Tire-Derived Aggregate In Chip Seal Subjected To Various Traffic And Environmental Conditions, Alireza Pourhassan

Doctoral Dissertations

"Chip seal is one of the most cost- and performance-effective pavement preservation treatments commonly used in the United States. Using crumb rubber obtained from scrap tires as a partial or full replacement for mineral aggregate has been proposed as a sustainable solution to reduce the negative environmental impacts of scrap tire accumulation and excessive consumption of natural resources. However, there was no data available regarding the performance of rubberized chip seal under traffic loads and environmental conditions. An extensive study using laboratory specimens and conditioning as well as field implementation and assessments were conducted to bridge this gap. Different traffic …

A Structure From Motion Photogrammetric Method For Continuously Measuring And Tracking The Deformations Of Soils During Triaxial Testing, Xiaolong Xia

Doctoral Dissertations

"Measuring soil deformation characteristics during triaxial testing is an important part of characterizing the stress-strain behavior of both saturated and unsaturated soils. The total and local deformations and volume changes of a soil specimen are indispensable parameters that need to be measured and are of great significance for understanding volume change and shear strength characteristics of the soil. Over the past several decades, numerous efforts have been made to measure the soil deformations during triaxial testing. However, it remains a great challenge for researchers to measure the volume-changes of unsaturated soils due to the existence of the air phase.

This …

Floating Offshore Wind Turbine Analysis And Discovery, Payton Maddaloni

Honors Theses and Capstones

No abstract provided.

Impact Of Augmented Documentation Workflows On Transportation Agency Asphalt Paving Operations: A Qualitative And Quantitative Study, Josh Withrow

Theses and Dissertations--Civil Engineering

e-Ticketing was an intriguing technology to many state transportation agencies (STAs) pre-COVID-19 pandemic but gained significant attention upon arrival of the pandemic due to the contactless nature of the technology. Research completed prior to the pandemic into e-ticketing for asphalt paving primarily identified qualitative benefits and concerns. However, minimal academic literature exists in the post-pandemic era discussing the additional e-ticketing benefits not previously captured which resulted in increased implementation by STAs. This research seeks to address this gap by gathering information from state members of the American Association of State Highway and Transportation Officials Committee on Construction (AASHTO COC), employees …

Optimizing Anaerobic Digestion Of Food Waste And Industrial Sludge For Biogas Production, Emma R. Murray

Honors College Theses

Food waste is a major contributor to municipal solid waste, and its disposal at landfills has significant environmental and economic impacts. Opportunities need to be identified for the sustainable management of food waste at large scales. Pulp and paper mills throughout the country commonly use anaerobic digestion to treat their waste sludge; however, this sludge can consist of over 50% lignin, which is slowly or negligibly digested. This research aims to explore the sustainability of co-digestion of food waste and paper mill sludge. Lab-scale studies were used to assess the feasibility of anaerobic digestion by measuring treatment efficiencies and biogas …

Estimation Of Mechanical Behavior Of Unsaturated Soils From A Soil-Water Characteristic Curve, Lucas Acheampong

Theses and Dissertations--Civil Engineering

The small-strain shear modulus and shear strength are two crucial mechanical behaviors used in the design of geotechnical structures and in the analyses of earth materials subjected to static and dynamic loadings. Traditional testing methods for these parameters are expensive and time-consuming. This research aimed to address these challenges by developing a model based on the inverse relationship between mechanical behavior of unsaturated soils and the soil-water characteristic curve (SWCC). The proposed model integrates a scaling function to align the SWCC with the mechanical property curve. Empirical relationships were established for the scaling function, specifically aligning with the air-entry value …

Materials Of Lightweight Concrete Research, Meganne Chapman, Kathryn Burns, John Grubb

Williams Honors College, Honors Research Projects

The objectives for this research project are to explore options for innovative and sustainable materials in lightweight concrete. Various materials including granite powder, hydrated lime, latex, and recycled glass beads will be used in the concrete testing for this project. The question the team wants to answer is how these additives affect the concrete’s mechanical properties. Weekly mix designs will be performed, and control cylinders will be compared to experimental cylinders. Compression and tensile testing will also be performed to further aid the research. The motivation for performing this research is to aid mix development for the University of Akron …

Uncertainty Quantification Of Live Load Effect In Buried Rc Box Culverts, Mohd Firoj

Dissertations and Theses

Although buried and mostly invisible to the traveling public, bridge-sized culverts (i.e., culverts with span around or longer than 20 ft) account for a large proportion of state-managed bridges. As per Oregon Department of Transportation inventory, there are approximately 35,000 culverts in the state highway system. Among them, 10,862 are in poor conditions and need to be analyzed for load rating purposes. The prediction and understanding of live load effects in culverts are crucial to the design, evaluation, and life-cycle maintenance of culverts. These live load effects include maximum bending moments and shear forces at different critical cross sections.

This …

Early-Age Strength And Failure Characteristics Of 3d Printable Polymer Concrete: Numerical Modelling And Experimental Testing, Mohammad Amin Dehghani Najvani

Civil Engineering ETDs

The time-dependent rheological and early-age strength parameters of Polymer concrete (PC) were investigated. PC flow decreased, and the static yield stress and thixotropy increased as the specimen aged, while the dynamic yield stress remained unchanged. The study found that the Herschel-Bulkley model can accurately describe the PC’s rheological behavior over time. The change in cohesion strength and internal friction angle over time was observed using uniaxial unconfined compression and direct shear tests of fresh PC. A time-dependent MohrCoulomb failure criterion was established. Temperature analysis was used to determine the gel time and explain the evolution of the time-dependent early-age strength …

Modeling Of Asphalt Concrete For Cross-Anisotropic Visco-Elasticity And Heterogeneity, Zafrul Hakim Khan

Civil Engineering ETDs

Asphalt Concrete (AC) is a cross-anisotropic viscoelastic material. This study has developed a methodology to backcalculate the cross-anisotropic properties of the AC layer from the Falling Weight Deflectometer (FWD) sensor and pavement response data from embedded sensors inside a pavement section. This study has also developed a two-way coupled Multiscale Finite Element Model (MsFEM) with Phase Field Fracture (PFF) to study the microstructural heterogeneity and damage of the AC layer based on the actual field loadings. A Finite Difference Time Domain (FDTD) and Machine learning-based backcalculation algorithm were developed to determine the layer thickness and dielectric constant from air-coupled Ground …

Analysis Of Loading Rate, Fiber Orientation And Material Composition Through Image Processing And Digital Volume Correlation In High Performance Concrete, Aidan R. Carlson

Electronic Theses and Dissertations

Ultra High Performance Concrete (UHPC) and High Performance concrete (HPC) is characterized by high compressive strength and high toughness. This is achieved through maximizing the particle packing density in the matrix and the use of fibers to reinforce the matrix, increasing the materials toughness. The interactions of fibers and the matrix during loading is quite complex and involves several different energy dissipation mechanisms. The goal of this work and this thesis is to investigate these interactions and identify any changes in material response, and hope that these changes may be useful for the design of UHPC moving forward.

In this …

Examining The Impact Of Centerline Rumble-Strip Installation In Prevention Of Head-On And Opposite Sideswipe Collisions In Maine, Jhan Kevin Gil Marin

Electronic Theses and Dissertations

Among all traffic collisions, lane departure crashes are the leading type of serious traffic crashes in Maine, comprising 72% of state-wide traffic fatalities. To reduce these crashes, Maine Department of Transportation (MaineDOT) installed shoulder and centerline rumble strips on roadways to prevent lane departure crashes in Maine. With a total installed length of 1503 miles of rumble strips, specifically 511 miles of centerline rumble strips in bidirectional and undivided rural two-lane roadways, there is a need to understand the impact of rumble strips in reducing lane departure crashes. In this thesis, observational before-after studies with two methods: comparison group, and …

Cement Stabilization Of Poorly Graded Sand, Lana Grayson Brown Sisung

Theses and Dissertations

Stabilization of poorly graded sand in full-scale applications is challenging. This thesis evaluated cement-stabilized sand and had two objectives: (1) evaluation of stabilized material using the PM device to quantify engineering properties for future comparison to alterative materials and to investigate the effectiveness of the device with sand and (2) investigation of the merits of alternative application of cement to sand to benchmark against other topically applied materials. The PM device was successfully used to recommend 10% cement for field studies with one sand, successfully allowed data collection in laboratory and field applications, and its potential in sand seems promising …

Optimization Of Hydraulic Cylinder Positioning For Wind Tower Hydraulic Erection System, Anbesh Rawal

Master's Theses

Wind produced electricity is a rapidly growing field with wind towers serving as critical components. Conventionally, special cranes are commonly used for wind tower erection. This study explores the use of hydraulic cylinders for small-scale wind tower erection. The thesis aims to find the optimal position of hydraulic cylinder connections in a hydraulic erection system for safe and energy-efficient tower erection and retraction and to enhance the performance and longevity of the system.

Structural analysis was conducted to investigate various hydraulic cylinder positioning configurations, ensuring minimal force exertion while maintaining structural integrity. The study included the selection of locally available …

Enhanced Bioretention Modeling At The Catchment-Scale: An Integrated Drainmod-Urban And Swmm Approach, Ghada Diab

Doctoral Dissertations

Bioretention systems are increasingly being adopted in stormwater management as an effective measure to promote infiltration and restore more natural hydrology in urbanized watersheds. Given the significant financial investment in these practices, reliable bioretention models are necessary to predict the effectiveness of these practices prior to installation. One such model, DRAINMOD-Urban (DM-Urban), was recently developed to produce hydrographs with a high temporal resolution at the site-scale, showing substantial promise during initial testing. However, the dataset used for initial testing was limited, consisting of one bioretention area with minimal occasions of overflow. Additionally, DM-Urban is an input-heavy model and there is …

3d Experimental Studies Of Temperature And Crystallographic Effects On Creep And Strength In Rock Salt, Amirsalar Moslehy

Doctoral Dissertations

Salt domes utilization as storage reservoirs in the energy sector has led to extensive studies on rock salt’s mechanical and geothermal behavior. These important facilities’ safety and serviceability rely on understanding rock salt’s compressive strength and creep behavior under various loading directions, water contents, in-situ stresses, and temperatures. Despite numerous studies on rock salt’s mechanical behavior in the literature, there are still many unanswered questions about rock salt’s behavior. This dissertation was aimed at utilizing state-of-the-art experimental techniques such as 3D synchrotron micro-computed tomography (SMT) and 3D x-ray diffraction (3DXRD) along with hundreds of compression and creep experiments to enhance …

Effect Of Seawater And Temperature Upon Carbon Fiber/Vinyl Ester (Cfve) Composites And Its Constituents, Vivek Chawla

Doctoral Dissertations

An experimental and computational investigation has been carried out to: (1) develop micromechanical characterization techniques for polymeric composites and (2) evaluate the effects of seawater and temperature upon the micro- and macro-response of the carbon fiber vinyl ester composites (CF/VE). Compression properties degradation due to short-term and long-term exposure to seawater is evaluated. A 12-16 % reduction in compression strength is observed due to long-term exposure to seawater, which is attributed to a decrease in interfacial shear strength (IFSS) due to long-term exposure to seawater. The developed Push-out methodology is used to characterize the IFSS. The presented approach consistently yields …

Functional Cementitious Composites With Micro-Sized Particulate Fillers For Additive Construction And Energy-Efficient Buildings, Adam Brooks

Doctoral Dissertations

With a growing energy demand, the development of sustainable and energy efficient building materials is growing rapidly. Numerous researches have focused on low carbon footprint construction materials, high-performance thermal insulations, high-performance façade, and thermal energy storage. Among these, the development of functional cementitious composites has attracted significant attention due to its potential utilities in building energy reduction and decarbonatization efforts. For example, fly ash cenospheres have been used as micro-size lightweight fillers to achieve low density and thermal conductivity. The use of phase change materials (PCM) in concrete has been studied to answer energy demands. While their inclusion into concrete …

Decoding Usage And Adoption Behavior Of The Low-Carbon Transportation Market: An Ai-Driven Exploration, Vuban Chowdhury

Graduate Theses and Dissertations

The transportation sector stands as a significant contributor to greenhouse gas emissions in the United States, with its environmental impact steadily escalating over the past few decades. This has prompted government agencies to facilitate the adoption and usage of low-carbon transportation (LCT) options as alternatives to fossil-fuel-powered transportation. LCTs include modes of transportation that minimize the overall carbon footprint of the transportation sector by relying on energy sources that are environmentally sustainable. These sustainable transportation options have also garnered significant interest in the transportation research community. For government agencies and researchers alike, a comprehensive understanding of the adoption and usage …