Engineering Commons^™

Influence Of Material Properties On Granules Prepared By Dry Co-Rotating Twin Screw Extrusion And Counterrotating Batch Mixing, Afstathios Steve Pafiakis

Dissertations

Recently, the pharmaceutical industry has shown interest in continuous granulating technology because of the flexibility it offers as an option that bypasses the costly scale-up process associated with batch manufacturing. However, the granulation mechanism(s) using twin screw co-rotating hot melt extrusion (HME) has not been fully explored, and it is not yet well understood. This leads to costly experiments during development and process reliability problem in commercial manufacturing. The main objective of this dissertation is to increase the mechanistic understanding of the twin screw granulation process of systems containing an active pharmaceutical ingredient (API) and a polymer excipient. This is …

Back And Shoulder Exoskeletons For Occupational Use: A Review, Erkan Ozan

Theses

Work-related musculoskeletal disorders (MSDs) account for a large portion of all work-related injuries according to OSHA. Back and shoulder-related disorders make the most of work-related MSDs according to the Bureau of Labor Statistics (BLS). Exoskeletons emerged in recent years with the potential to reduce the risks of work-related musculoskeletal disorders and injuries. Their use in occupational settings is increasing, and exoskeleton designs are rapidly evolving. This paper reviewed recent scientific articles (2015 and after) that evaluated back and shoulder-support passive industrial exoskeletons. The findings of these articles are summarized and analyzed to assess the benefits of passive upper-body exoskeletons by …

A Detailed Parameter Study Into The Dermal Absorption Of Chemical Warfare Agents And The Effects Of Pharmacokinetics, Koko Lear

Theses

Chemical warfare agents (CWAs) are substances of varying toxicity profiles. These chemicals exhibit complex dynamics and pose a serious health risk when released into the environment. A mathematical model based on Fick’s second law of diffusion was developed to comprehend how these compounds were absorbed into the skin. The analysis applied to both small and large doses and, successfully, predicted experimental results. This work also includes the effects of CWA physicochemical properties on evaporation and dermal absorption through the stratum corneum. A sensitivity analysis was conducted to assess the impacts of small variations in the initial dose, environmental conditions, and …

Hydrophobically Modified Isosorbide Dimethacrylates As Biomaterials For Bisphenol A Free Dental Fillings, Bilal Marie

Dissertations

Amalgam and Bisphenol A glycerolate dimethacrylate (BisGMA) are the main dental filling materials in use today. Because of the negative perception of amalgam and its lower esthetic appeal, as well as the desire to replace the endocrine disruptor Bisphenol A, which is the building block of BisGMA, there has been a critical need to search for safer alternatives to these dental filling materials.

Isosorbide is a sugar-based molecule generally recognized as safe. It has been extensively studied as a replacement to the Bisphenol A core in various materials. However, isosorbide is extremely hygroscopic, and water uptake in dental fillings causes …

Itraconazole Nanocomposites Prepared Via Rotary Evaporator Drying Of Nanomilled Suspensions, Alexander Santos Coelho

Theses

The aim of this study is to explore the feasibility of rotary evaporation for drying wetmilled drug suspensions as a novel approach to produce drug nanocomposites that exhibit fast redispersion and immediate drug release. To this end, the physical stability of the nanomilled itraconazole (drug) suspensions, a.k.a., nanosuspensions, during the milling and storage; the drying of the itraconazole nanosuspensions via the rotary evaporator; and the type/loading of various polymers/surfactants (dispersants) on aqueous redispersion and drug release from the nanocomposites were examined. Our results suggest that smaller drug particle size, owing to nanomilling, and smaller nanocomposite particle size, owing to optimized …

Multi-Stage Stochastic Optimization And Reinforcement Learning For Forestry Epidemic And Covid-19 Control Planning, Sabah Bushaj

Dissertations

This dissertation focuses on developing new modeling and solution approaches based on multi-stage stochastic programming and reinforcement learning for tackling biological invasions in forests and human populations. Emerald Ash Borer (EAB) is the nemesis of ash trees. This research introduces a multi-stage stochastic mixed-integer programming model to assist forest agencies in managing emerald ash borer insects throughout the U.S. and maximize the public benets of preserving healthy ash trees. This work is then extended to present the first risk-averse multi-stage stochastic mixed-integer program in the invasive species management literature to account for extreme events. Significant computational achievements are obtained using …

Stochastic Programming And Agent-Based Simulation Approaches For Epidemics Control And Logistics Planning, Xuecheng Yin

Dissertations

This dissertation addresses the resource allocation challenges of fighting against infectious disease outbreaks. The goal of this dissertation is to formulate multi-stage stochastic programming and agent-based models to address the limitations of former literature in optimizing resource allocation for preventing and controlling epidemics and pandemics. In the first study, a multi-stage stochastic programming compartmental model is presented to integrate the uncertain disease progression and the logistics of resource allocation to control a highly contagious infectious disease. The proposed multi-stage stochastic program, which involves various disease growth scenarios, optimizes the distribution of treatment centers and resources while minimizing the total expected …

Towards Quality By Design (Qbd) Of Pharmaceutical Oral Films Loaded With Poorly Watersoluble Drugs, Eylul Cetindag

Dissertations

Oral films are an emerging drug delivery dosage form with numerous advantages such as ease of handling, the possibility to circumvent the first-pass metabolism, better patient compliance, capability for continuous manufacturing, and as a platform for personalized medicine. As films are different from other final dosages by their dimensions and their matrix form, further research is required to better understand the impact of excipient and drug on product performance to assure a consistent and good quality product. Therefore, this dissertation aims to contribute towards the processability and manufacturability of films by examining the impact of the materials and processes. First, …

Exploring Fused Deposition Modeling (Fdm) Three-Dimensional Printing Tablet Design Options For Pharmaceutical Dosage Forms, Guluzar Gorkem Buyukgoz

Dissertations

This dissertation examines the use of Fused Deposition Modeling (FDM) based three-dimensional (3D) printing approach for developing patient-specific dosage forms and addressing related technical challenges in such drug delivery systems. The first main objective is to explore pharmaceutical tablet design options using novel FDM 3D printing technology as the drug delivery platform such that drug form and tablet properties are tailored by considering patient age-specific formulations and dissolution control. Of the five different design options, two proposed options meet the main objective of providing similar drug release, whereas the popular option of fixed drug concentration but differing tablet size could …

Comparison Of Longitudinal Changes In Resting State Functional Magnetic Resonance Imaging Between Alzheimer’S And Healthy Controls, Berk Can Yilmaz

Theses

Resting State Functional Magnetic Resonance Imaging (rs-fMRI) is a technique that is widely used for analyzing brain function using different approaches and methods. This study involves rs-fMRI analysis of Blood Oxygenation Level Dependent (BOLD) signals acquired from Alzheimer’s disease (AD) Patients and Healthy Controls (HC). Each subject in the study had both functional and anatomical images with at least one rs-fMRI scan with their Anatomical (T1) scans. Previous rs-fMRI studies have demonstrated that AD shows differences in Amplitude of Low Frequency (<0.1 Hz) Fluctuations (ALFF), and Regional Homogeneity (ReHo) measures according to HCs.

The aim of the study is to investigate individual and group level differences using ReHo and mALFF related …

Perivascular Waste Metabolites Clearance In Central Nervous System (Cns), Yiming Cheng

Dissertations

Efficient clearance of interstitial waste metabolites is essential for normal brain homeostasis. Such effective clearance is hampered by the lack of a lymphatic system in the brain, and the cerebrospinal fluid (CSF) is unable to clear large size waste metabolites in the brain. Here, a novel idea that brain arterial endothelium and smooth muscle cells reactivity regulates the clearance of these water-insoluble large size waste metabolites through the perivascular dynamic exchange, and that low dose ethanol promotes this perivascular clearance is proposed.

In Aim 1, the biodistribution of a large size waste metabolite (Amyloid-β protein mimic) in rat perivascular space …

Effect Of 3d Printed Tablet Shape On Drug Release Profile, Christina Gedeon

Theses

There is a growing interest in utilizing additive manufacturing (AM) as a manufacturing tool to develop oral tablets for personalized medicine. This ultimate goal in mind, this study explores the feasibility of extrusion-based fused deposition modeling (FDM) to 3D print oral tablets with tunable design to control drug release profile. Tablets are printed using poly(vinyl alcohol) (PVA) loaded with model drugs: acetaminophen and caffeine. Hot melt extrusion (HME) is used to fabricate PVA filaments loaded with acetaminophen and caffeine. These filaments are used to fabricate a range of tablets with varying designs to prepare immediate and delayed release tablets. Thermal …

Developmental And Sex Modulated Neurological Alterations In Autism Spectrum Disorder, Azeezat Azeez

Dissertations

Autism Spectrum Disorder (ASD) was first described in 1943 by Dr. Leo Kranner in a case study published in The Nervous Child. It is a neurodevelopment disorder, with a range of clinical symptoms. According to the Diagnostic and Statistical Manual of Mental Disorders (DSM-5), used by clinicians to diagnose mental disorders, a child needs to have persistent social deficits, language impairments, and repetitive behaviors, that cannot be explained by neurological damage or intellectual disability. It is known that children diagnosed with ASD are often are developmentally delayed therefore alterations in the typical developmental trajectory should be a major factor in …

Modelling In Vitro Dissolution And Release Of Sumatriptan Succinate From Polyvinylpyrrolidone-Based Microneedles Aided By Iontophoresis, James Paul Ronnander

Dissertations

A novel dissolving microneedle array system is developed to investigate permeation of a sumatriptan succinate formulations through the skin aided by iontophoresis. Three formulations consisting of hydrophilic, positively charged drug molecules encapsulated in a water-soluble biologically suitable polymer, polyvinylpyrrolidone (PVP), have been accepted by the U.S. Food and Drug Administration (FDA). The microneedle systems are fabricated with 600 pyramid-shaped needles, each 500 µm tall, on a 0.785-cm² circular array. In vitro transdermal studies with minipig skin and vertical Franz diffusion cells show > 68% permeation of sumatriptan over a 24-hour period. A combination of microneedle and electrical current density ranging …

Roles Of Surfactant And Binary Polymers On Dissolution Enhancement Of Bcs Ii Drugs From Nanocomposites And Amorphous Solid Dispersions, Md Mahbubur Rahman

Dissertations

Drug nanocomposites and amorphous solid dispersions (ASDs) are two major formulation platforms used for the bioavailability enhancement of BCS Class II drugs. The major drawback of nanocomposites is their inability to attain high drug supersaturation during in vitro (<50% relative supersaturation) and in vivo dissolution. On the other hand, formulating an amorphous solid dispersion (ASD) with high drug loading (>20%) that releases drug rapidly, while generating and maintaining high supersaturation over at least three hours is challenging. The goal of this thesis is to develop a fundamental understanding of the impact of anionic surfactants–polymers on in vitro drug release from nanocomposites and ASDs, while addressing the above challenges. To achieve this goal, the following objectives are set: (1) compare griseofulvin …

A Multimodal Approach To Investigate Brain Reorganization After Spinal Cord Injury Using Functional Magnetic Resonance Imaging And Functional Near-Infrared Spectroscopy, Keerthana Deepti Karunakaran

Dissertations

Traumatic Spinal Cord Injury (SCI) results in structural and functional neurological changes at both the brain and the level of the spinal cord. Anatomical studies indicate decreased grey matter volume in sensorimotor and non-sensorimotor regions of the cortex following SCI; whereas, neurophysiological findings mostly report altered functional activity in the sensorimotor nodes of the cortex, subcortex, and cerebellum. Therefore, it is currently unknown whether tissue atrophy observed in non-motor related areas has any concomitant functional consequences. Furthermore, the neural underpinnings of adaptive neuroplasticity after SCI is not well-defined in the current literature. Hence, this dissertation is a pioneer study investigating …

High-Performance Learning Systems Using Low-Precision Nanoscale Devices, Nandakumar Sasidharan Rajalekshmi

Dissertations

Brain-inspired computation promises a paradigm shift in information processing, both in terms of its parallel processing architecture and the ability to learn to tackle problems deemed unsolvable by traditional algorithmic approaches. The computational capability of the human brain is believed to stem from an interconnected network of 100 billion compute nodes (neurons) that interact with each other through approximately 10¹⁵ adjustable memory junctions (synapses). The conductance of synapses is modifiable allowing the network to learn and perform various cognitive functions. Artificial neural networks inspired by this architecture have demonstrated even super-human performance in many complex tasks.

Computational systems based …

Submandibular Mechanical Stimulation Of Upper Airway Muscles To Treat Obstructive Sleep Apnea, Ferhat Erdogan

Dissertations

The extrinsic tongue muscles are activated in coordination with pharyngeal muscles to keep a patent airway during respiration in wakefulness and sleep. The activity of genioglossus, the primary tongue-protruding muscle playing an important role in this coordination, is known to be modulated by several reflex pathways mediated through the mechanoreceptors of the upper airways. The main objective is to investigate the effectiveness of activating these reflex pathways with mechanical stimulations, for the long-term goal of improving the upper airway patency during disordered breathing in sleep. The genioglossus response is examined during mandibular and sub-mandibular mechanical stimulations in healthy subjects during …

Comparative Analysis Of The Dissolution Performance Of Aspirin Tablets In The Usp Apparatus 2 And In A Minivessel Dissolution System, Annmarie C. Walker

Theses

Dissolution testing is a critical component of quality control procedures in the pharmaceutical industry in order to ensure that the final solid dosage forms have consistent dissolution properties. Dissolution tests are also routinely conducted to evaluate the in-vitro performance of solid dosage forms during pharmaceutical development, to aid in the behavior of formulations, and to optimize drug release from dosage forms.

The use of compendial dissolution test apparatus and techniques, such as the USP 2 (Paddle), to characterize the dissolution performance of oral drug delivery system is an established area of pharmaceutical science. However, this method is not always appropriate, …

Computational And Experimental Determination Of The Mixing Efficiency Of A Microfluidic Serpentine Micromixer, Siril Arockiam

Theses

In microfluidics, efficiency and mixing time are the greatest disadvantages. These parameters hinder the application of microfluidic devices for biochemical and immunological assays. However, once these disadvantages have been overcome by optimizing the parameters of the microfluidic device, it becomes the important analytical tool. In this experiment, various designs of microfluidic devices have been both simulated using COMSOL software, and experimentally verified to obtain the optimized parameter such as depth and velocity for better mixing efficiency. The COMSOL model has been validated by comparing the results with fluorescent images data of the experiment. The microfluidic device is built with Adhesive …

Power Dissipation And Power Correlations For A Retreatblade Impeller Under Different Baffling Conditions, Chadakarn Sirasitthichoke

Theses

Glass-lined stirred reactors and tanks are commonly used in the pharmaceutical industry because of their corrosion resistance, ease of cleanliness and minimization of product contamination. Most industrial glass-lined tank reactors are provided with a torispherical tank bottom and a retreat curve impeller with low impeller clearance from the vessel bottom. The power, P, dissipated by the impeller is a critical process parameter to mixing processes to achieve the desired mixing effect, especially since the power per unit volume, P/V, directly controls mass transfer processes and other mixing phenomena. However, little information has been published about the power dissipation and the …

Novel Experimental Method For The Determination Of The Minimum Agitation Speed For Solids Suspension In Flat-Bottomed Stirred Tank Reactors, Shriarjun Shastry

Theses

Knowledge of the minimum agitation speed, Njs, required to suspend finely divided solids in vessels stirred by an impeller is a critical parameter to properly operate industrial tanks in a large number of industrial operations. The most common experimental approach to measure N_js is that of Zwietering’s (Chem. Eng. Sci., 1958, 8, 244-253), consisting of visually inspecting the tank bottom and visually determining the impeller agitation speed at which the solids are observed to rest on the tank bottom for no more than 1-2 seconds before being swept away. This method is quite reliable, but a method …

Computational And Experimental Determination Of The Hydrodynamics In A Stirred Unbaffled Vessel Provided With Angle-Mounted Axial Impellers, Ji Ma

Theses

In most industrial applications, stirred tanks and reactors are typically provided with baffles to improve their mixing characteristics. However, in a number of pharmaceutical production facilities unbaffled vessels are commonly used. The absence of baffles is preferred in such cases because it reduces the potential for contamination and makes cleaning the vessel between batches easier. However, the lack of baffles also has a negative impact on the system’s hydrodynamics since it often results in poor mixing of the batch, especially if the impeller is centrally placed, since the liquid in such a system is subject to a strong tangential flow, …

Experimental Determination Of The Agitation Requirements For Solids Suspension In Dissolution Systems Using A Mini Paddle Apparatus, Yang Song

Theses

Dissolution testing is a critical step in quality control of manufactured final products in the pharmaceutical industry. The United State Pharmacopeia (USP) Dissolution Testing Apparatus 2 (paddle) is the most widely used dissolution test devices in the pharmaceutical industry to formulate solid drug dosage forms and to develop quality control specifications for its manufacturing process.

Mini vessels and mini paddle dissolution testing systems are smaller versions of the USP 2 Apparatus. The concept of the mini paddle apparatus is similar to that of the USP 2 setup but it is scaled down about to 1/5 of the volume and 40% …

Effect Of Impeller Submergence On Power Dissipation And Solids Suspension In Mixing Systems Equipped With Pitch-Blade Turbines, Yufeng Song

Theses

Mixing and dispersion of solids in a liquid is a process frequently encountered in the pharmaceutical industry and often conducted in cylindrical baffled tanks stirred by mechanical impellers. In operations where the liquid level is decreased (as often which emptying the tank) the process must be stopped when the solids are no longer suspended. In this work, the minimum agitation to suspend solids (Njs) when the liquid level was lowered, and the impeller submergence S_b changed as a result were determined for the case of a six-blade, pitch-blade turbine (6-PBT) impeller. The power consumed by the impeller …

Experimental Determination Of Solids Suspension With Angled Impeller In A Pharmaceutical Mixing Vessel, Yingxi Tang

Theses

Angled-mounted impellers are commonly used in a number of pharmaceutical industry applications, from laboratory reactors to full-scale tanks. In these systems, the impeller is not centrally and vertically mounted, as in most stirred vessels, but it enters the vessel, and is therefore immersed in the fluid, at an angle from the vertical. This arrangement provides some baffling effects that would not otherwise exist if the impeller was centrally mounted.

One common requirement for such systems is that they are capable of suspending small solids dispersed in the liquid. Therefore, it is critical to know the value of the minimum agitation …

Hydrodynamic Cfd Modeling Of A Pharmaceutical Reactor Vessel Provided With A Retreat-Blade Impeller Under Different Baffling Conditions, Christopher G. Foehner

Theses

In the pharmaceutical industry, glass-lined reactors and vessels are often utilized to carry out a variety of different unit operations. Within these systems, both the vessel and impellers are typically glass-lined in order to provide superior corrosion resistance, prevent product contamination, and enhance cleanability. This approach, in turn, often requires the use of different, and sometimes sub-optimal, baffling conditions, which affect the hydrodynamics of the vessels and the reactor performance.

Computational Fluid Dynamics (CFD) is a computational tool that employs numerical methods and algorithms to discretize and numerically solve partial differential equations (PDEs) representing mass, energy, and momentum conservation equations …

Experimental Determination Of The Mixing Requirements For Solid Suspension In Pharmaceutical Stirred Tank Reactors, Anqi Zhou

Theses

Glass and glass-lined, stirred-tank reactors are of significant importance in the pharmaceutical and related industries. Because of fabrication issues, a retreat blade impeller (RBI) with a low impeller clearance off the tank bottom is commonly used in glass-lined reactors, typically combined with a single baffle (providing only partial baffling conditions) mounted from the top of the reactor. In addition, these reactors are often provided with a torispherical bottom. Other configurations are also used, including full baffling or no baffles at all, hemispherical bottoms, and different impeller types. Despite their common use, some of the most important mixing characteristics of this …

Assessment Of A Marine Polysaccharide For Use As Excipient In Pharmaceutical Hot-Melt Extrusion, Qing Ye

Theses

Pharmaceutical Hot Melt Extrusion (HME) is currently investigated by both industry and academia as a method for manufacturing solid oral dosages with improved bioavailability of poorly-water soluble active pharmaceutical ingredients (APIs) and control drug release of water-soluble APIs. Although HME is traditionally utilizing synthetic polymers to produce such dosages, biopolymers constantly gain ground by virtue of renewability, biocompatibility and in some cases biodegradability. In this work, the possibility of using Keltone, a marine polysaccharide derived from brown seaweed, as a polymeric excipient for pharmaceutical HME is explored. Keltone is insoluble in acidic pH and soluble in basic pH, therefore making …

Dispersion And Dissolution Kinetics Of Api Particles In Pharmaceutical Hot Melt Extrusion, Wang Zhan

Theses

Pharmaceutical Hot Melt Extrusion (HME) is essentially a special case of polymer compounding. The elementary steps involved in traditional plastics melt processing are handling of particulates, melting, dispersive and distributive mixing, devolatilization and stripping, and finally pressurization and pumping. However, for pharmaceutical HME, the dissolution of the API (Active Pharmaceutical Ingredient) is an additional and very important elementary step, along with the melting of the polymeric excipient that precedes it, and mixing which accelerates the dissolution process. A major concern in pharmaceutical HME is the thermal degradation of the API. To avoid overexposure of API to heat while ensuring complete …