Engineering Commons^™

Application Of Tvs Models For Seed Simulation Of A Variety Of Tvs Devices, Li Shen, Yang Xu, Steffen Holland, Sergej Bub, David Pommerenke, Daryl G. Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Accurate Models of Transient Voltage Suppression (TVS) Devices Are Important for Determining the Suitability of Electrostatic Discharge (ESD) Protection Strategies Early in the Design Process. an Improved TVS Model is Used in the Following Paper to Represent a Variety of TVS Devices, Including a Snapback Device, Non-Snapback Device, and a Varistor. the Models Include Recent Improvements to Represent Conductivity Modulation and the overall Shape of the TVS Device's Transient Response. the Models Are Tuned based on Characterizations of These Protection Devices using a Transmission Line Pulse (TLP) and Are Then Used in a System Efficient ESD Design (SEED) Simulation to …

Blockchain-Enabled Authenticated Key Agreement Scheme For Mobile Vehicles-Assisted Precision Agricultural Iot Networks, Anusha Vangala, Ashok Kumar Das, Ankush Mitra, Sajal K. Das, Youngho Park

Computer Science Faculty Research & Creative Works

Precision Farming Has a Positive Potential in the Agricultural Industry Regarding Water Conservation, Increased Productivity, Better Development of Rural Areas, and Increased Income. Blockchain Technology is a Better Alternative for Storing and Sharing Farm Data as It is Reliable, Transparent, Immutable, and Decentralized. Remote Monitoring of an Agricultural Field Requires Security Systems to Ensure that Any Sensitive Information is Exchanged Only among Authenticated Entities in the Network. to This End, We Design an Efficient Blockchain-Enabled Authenticated Key Agreement Scheme for Mobile Vehicles-Assisted Precision Agricultural Internet of Things (IoT) Networks Called AgroMobiBlock. the Limited Existing Work on Authentication in Agricultural Networks …

Cyclic Sequential Adsorption Desorption/Thermal-Catalytic Oxidation Of Volatile Organic Compounds: Material Development, Process Advancement/Improvement, And Numerical Modeling, Simulation And Optimization, Busuyi Ojo Adebayo

Doctoral Dissertations

"Volatile organic compounds (VOCs) are a group of useful organic chemicals but when emitted have contributed to air pollution. They affect human health, cause environmental degradation and contaminate our waters and soils, so they need to be controlled. When they exist in dilute concentrations, abatement becomes challenging, thus requiring advanced abatement methods, e.g., sequential adsorption desorption/thermal-catalytic oxidation process. The overall goal of this research was to abate dilute streams of VOCs via the process. The specific objectives were to 1) develop novel adsorbent/catalyst dual-function materials (DFMs) for the process, 2) improve the operability of a one-bed-one-column reactor configuration for the …

Reveal Wind Loading Of Tornadoes And Hurricanes On Civil Structures Towards Hazard-Resistant Design, Ryan Honerkamp

Doctoral Dissertations

"Extreme winds impacting civil structures lead to death and destruction in all regions of the world. Specifically, tornadoes and hurricanes impact communities with severe devastation. On average, 1200 tornadoes occur in the United States every year. Tornadoes occur predominantly in the Central and Southeastern United States, accounting for an annual $1 billion in economic losses, 1500 injuries, and 90 deaths. The Joplin, MO Tornado in 2011 killed 161 people, injured more than 1000, destroyed more than 8000 structures, and caused $2.8 billion of property loss. Hurricanes occur predominantly on the United States East coast regions and along the coast of …

An Agent-Based Model To Study Competitive Construction Bidding And The Winner's Curse, Amr Elsayegh, Cihan H. Dagli, Islam H. El-Adaway

Engineering Management and Systems Engineering Faculty Research & Creative Works

Reverse auction theory is the basis for competitive construction bidding process. The lowest bid method is utilized for selecting contractors in public projects. The winning contractor having the lowest bid value could be cursed when the submitted bid value results in negative profits. This is caused by many factors such as the contractor's estimation accuracy and markup. This is addressed in this paper by providing a model simulating the construction competitive bidding and the occurrence of the winner's curse. To this end, the authors show the extent to which the winner's curse affects the status of contracting companies. The objectives …

Optical Fiber Based Integrity Test Of Civil Engineering Materials: Numerical Analysis, Ruoyu Zhong

Masters Theses

“Major advancement in Civil Engineering cannot be accomplished without the help of sensors. Among different types of sensors, fiber-optic sensor is known for its light weight, high accuracy, resolution, immunity to electromagnetic interference, and resistance to harsh environment. This research mainly focuses on fiber-optic sensor application on concrete structures as temperature sensor. Thermal Integrity Profiling (TIP) is a non-destructive integrity testing method which makes use of the hydration heat from the concrete curing process to detect defects within a drilled shaft. Any defect of concrete could result in a temperature anomaly in a drilled shaft. The accuracy of the current …

Mechanism Of Tricalcium Silicate Hydration In The Presence Of Polycarboxylate Polymers, Rachel Cook, Hongyan Ma, Aditya Kumar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Abstract: The early-age hydration of cement is inhibited in the presence of comb-shaped polycarboxylate ether (PCE) polymer -- a dispersant commonly added to control rheological properties of fresh cement paste. This study employs a series of microcalorimetry experiments and phase boundary nucleation and growth simulations to elucidate the effects of dosage and molecular architecture of PCE on hydration of tricalcium silicate (Ca₃SiO₅ or C₃S in cement notation), the dominant phase in cement. Results show that PCE -- regardless of its molecular architecture -- suppresses early-age hydration of C₃S. PCE-induced retardation becomes increasingly more …

Transient Multiphase Flow Simulation For Unloading Of Frac Hit Gas Wells, Miguel Angel Cedeno Moreno

Doctoral Dissertations

"This work seeks to develop a fully step-by-step transient multiphase flow simulation valid for unloading gas wells using nitrogen. It studies the behavior of nitrogen for unloading horizontal gas wells with gas injection in the annulus. The work investigates unloading non-Newtonian fluids such as those which invade offset wells when a frac hit occurs during hydraulic fracturing operations in unconventional wells. The effect of varying tubing depth and injection pressure are included in the study.

Results show that as the plastic viscosity increases, the nitrogen volume and time to unload will be increased. As tubing depth increases, the nitrogen volume …

Study Of Gas Production From Shale Reservoirs With Multi-Stage Hydraulic Fracturing Horizontal Well Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no …

Investigation Of Microstructure And Mechanical Properties By Direct Metal Deposition, Jingwei Zhang

Doctoral Dissertations

"Microstructure and properties of Direct Metal Deposition (DMD) parts are very crucial to meeting industrial requirements of parts quality. Prediction, and control of microstructure and mechanical properties have attracted much attention during conventional metal manufacturing process under different conditions. However, there is few investigations focused on microstructure simulation and mechanical properties control under different process parameters during DMD process. This dissertation is intended to develop a multiscale model to investigate Ti6Al4V grain structure development and explore Ti6Al4V based functionally graded material (FGM) deposit properties during DMD process. The first research topic is to investigate and develop a cellular automaton-finite element …

Modeling And Simulation Of Microgrid, Ahmad Alzahrani, Mehdi Ferdowsi, Pourya Shamsi, Cihan H. Dagli

Electrical and Computer Engineering Faculty Research & Creative Works

Complex computer systems and electric power grids share many properties of how they behave and how they are structured. A microgrid is a smaller electric grid that contains several homes, energy storage units, and distributed generators. The main idea behind microgrids is the ability to work even if the main grid is not supplying power. That is, the energy storage unit and distributed generation will supply power in that case, and if there is excess in power production from renewable energy sources, it will go to the energy storage unit. Therefore, the electric grid becomes decentralized in terms of control …

Applications Of Simulation And Optimization Techniques In Optimizing Room And Pillar Mining Systems, Angelina Konadu Anani

Doctoral Dissertations

"The goal of this research was to apply simulation and optimization techniques in solving mine design and production sequencing problems in room and pillar mines (R&P). The specific objectives were to: (1) apply Discrete Event Simulation (DES) to determine the optimal width of coal R&P panels under specific mining conditions; (2) investigate if the shuttle car fleet size used to mine a particular panel width is optimal in different segments of the panel; (3) test the hypothesis that binary integer linear programming (BILP) can be used to account for mining risk in R&P long range mine production sequencing; and (4) …

A Meta-Architecture Analysis For A Coevolved System-Of-Systems, George Anthony Muller Iv

Masters Theses

"Modern engineered systems are becoming increasingly complex. This is driven in part by an increase in the use of systems-of-systems and network-centric concepts to improve system performance. The growth of systems-of-systems allows stakeholders to achieve improved performance, but also presents new challenges due to increased complexity. These challenges include managing the integration of asynchronously developed systems and assessing SoS performance in uncertain environments.

Many modern systems-of-systems must adapt to operating environment changes to maintain or improve performance. Coevolution is the result of the system and the environment adapting to changes in each other to obtain a performance advantage. The complexity …

Efficient Time-Dependent System Reliability Analysis, Zhifu Zhu

Doctoral Dissertations

"Engineering systems are usually subjected to time-variant loads and operate under time-dependent uncertainty; system performances are therefore time-dependent. Accurate and efficient estimate of system reliability is crucial for decision makings on system design, lifetime cost estimate, maintenance strategy, etc. Although significant progresses have been made in time-independent reliability analysis for components and systems, time-dependent system reliability methodologies are still limited. This dissertation is motivated by the need of accurate and effective reliability prediction for engineering systems under time-dependent uncertainty. Based on the classic First and Second Order Reliability Method (FORM and SORM), a system reliability method is developed for multidisciplinary …

Modeling Of Gas Production From Shale Reservoirs Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas transport in unconventional shale strata is a multi-mechanism-coupling process that is different from the process observed in conventional reservoirs. In micro fractures which are inborn or induced by hydraulic stimulation, viscous flow dominates. And gas surface diffusion and gas desorption should be further considered in organic nano pores. Also, the Klinkenberg effect should be considered when dealing with the gas transport problem. In addition, following two factors can play significant roles under certain circumstances but have not received enough attention in previous models. During pressure depletion, gas viscosity will change with Knudsen number; and pore radius will increase when …

Computational Modeling And Experimental Study On Optical Microresonators Using Optimal Spherical Structure For Chemical Sensing, Hanzheng Wang, Lei Yuan, Jie Huang, Xinwei Lan, Cheol-Woon Kim, Lan Jiang, Hai Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

Chemical sensors based on optical microresonators have been demonstrated highly sensitive by monitoring the refractive index (RI) changes in the surrounding area near the resonator surface. In an optical resonator, the Whispering Gallery Modes (WGMs) with high quality (Q) factor supported by the spherical symmetric structure interacts with the contiguous background through evanescent field. Highly sensitive detection can be realized because of the long lifetime of the photons. The computational models of solid glass microspheres and hollow glass spheres with porous wall (PW-HGM) were established. These two types of microresonators were studied through simulations. The PWHGM resonator was proved as …

Dynamics And Dislodgment From Pore Constrictions Of A Trapped Nonwetting Droplet Stimulated By Seismic Waves, Wen Deng, M. Bayani Cardenas

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Seismic waves affect fluid flow and transport processes in porous media. Therefore, quantitative understanding of the role of seismic waves in subsurface hydrodynamics is important for the development of practical applications and prediction of natural phenomena. We present a theoretical fluid dynamics model to describe how low-frequency elastic waves mobilize isolated droplets trapped in pores by capillary resistance. The ability of the theoretical model to predict the critical mobilization amplitudes (A_c) and the displacement dynamics of the nonwetting droplet are validated against computational fluid dynamics (CFD) simulations. Our theory has the advantage of rapid calculation of A_{c …}

Analysis Of Passive Louver Shading Systems And Impact On Interior Environment, Cory Joseph Brennan

Masters Theses

An installed passive louver shading systems can affect the heating, cooling, and lighting loads of any building, by altering the amount of solar energy, in the form of light and heat, from entering. The benefits of a louver system are derived from the application of solar geometry incident on the site and the climate within the area. By optimizing a passive louver system's design parameters, a building can reduce the total annual energy consumption due to artificial heating, cooling loads and artificial lighting. This research has implemented simulation modeling software, Energy Plus, to predict the effect of passive louver shades …

An Open Framework For Highly Concurrent Real-Time Hardware-In-The-Loop Simulation, Ryan C. Underwood, Bruce M. Mcmillin, Mariesa Crow

Computer Science Faculty Research & Creative Works

Hardware-in-the-loop (HIL) real-time simulation is becoming a significant tool in prototyping complex, highly available systems. The HIL approach permits testing of hardware prototypes of components that would be extremely costly or difficult to test in the deployed environment. In power system simulation, key issues are the ability to wrap the systems of equations (such as Partial Differential Equations) describing the deployed environment into real-time software models, provide low synchronization overhead between the hardware and software, and reduce reliance on proprietary platforms. This paper introduces an open source HIL simulation framework that can be ported to any standard Unix-like system on …

Frequency-Domain Measurement Method For The Analysis Of Esd Generators And Coupling, Jayong Koo, Qing Cai, Giorgi Muchaidze, Andrew Martwick, Kai Wang, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

A method for analyzing electrostatic discharge (ESD) generators and coupling to equipment under test in the frequency domain is proposed. In ESD generators, the pulses are excited by the voltage collapse across relay contacts. The voltage collapse is replaced by one port of a vector network analyer (VNA). All the discrete and structural elements that form the ESD current pulse and the transient fields are excited by the VNA as if they were excited by the voltage collapse. In such a way, the method allows analyzing the current and field-driven linear coupling without having to discharge an ESD generator, eliminating …

Patterns In Team Communication During A Simulation Game, David M. Baca, Ray Luechtefeld, Steve Eugene Watkins

Engineering Management and Systems Engineering Faculty Research & Creative Works

The development of communication skills is a necessary preparation for effective engineering teamwork. Argyris' "Theory of Action" provides a framework for understanding patterns in team dialogue. Students can benefit from an awareness of these patterns. The theory highlights the detection and correction of errors by sharing information during group collaboration and interactions. Quality decision-making can be enhanced when members of a team develop high degrees of openness and interdependence. Quality decision-making can be diminished when members of a team regulate the information shared within the team. This work analyzes team interactions from simulation games used in an interdisciplinary engineering course …

Simulation Model For Assessing Transient Performance Of Capacitive Voltage Transformers, I. Sule, Ganesh K. Venayagamoorthy, U. O. Aliyu

Electrical and Computer Engineering Faculty Research & Creative Works

In determining the correct operation of relays of a protection scheme, proper representation of instrument transformers and their behavior in conditions where there can be transient is very critical. This paper presents a simulation model for assessing the transient performance of capacitive voltage transformers (CVTs). In order to test the validity of the developed model, four CVT operational conditions are considered using field data collected from one of the Nigerian electric utility 330/132/33 kV substations. The model simulation results revealed various configuration performance responses that could affect relay protection schemes to different degrees. As expected, the CVT responses showed that …

Pulse Regulation Control Technique For Integrated High-Quality Rectifier-Regulators, Mehdi Ferdowsi, Ali Emadi

Electrical and Computer Engineering Faculty Research & Creative Works

The pulse regulation control scheme is presented and applied to the boost integrated flyback rectifier/energy storage dc/dc (BIFRED) converter as the most popular member of the integrated high-quality rectifier-regulators (IHQRR). In contrast to the conventional control techniques, the principal idea of pulse regulation is to regulate the output voltage using a series of high- and low-power pulses generated by the current of the input inductor, which is operating in discontinuous conduction mode (DCM). Analysis of the BIFRED converter operating in DCM is presented. Fundamentals of pulse regulation as well as its stability analysis and the estimation of the output voltage …

Modeling Yield Of Carbon-Nanotube/Silicon-Nanowire Fet-Based Nanoarray Architecture With H-Hot Addressing Scheme, Shanrui Zhang, Minsu Choi, Nohpill Park

Electrical and Computer Engineering Faculty Research & Creative Works

With molecular-scale materials, devices and fabrication techniques recently being developed, high-density computing systems in the nanometer domain emerge. An array-based nanoarchitecture has been recently proposed based on nanowires such as carbon nanotubes (CNTs) and silicon nanowires (SiNWs). High-density nanoarray-based systems consisting of nanometer-scale elements are likely to have many imperfections; thus, defect-tolerance is considered one of the most significant challenges. In this paper we propose a probabilistic yield model for the array-based nanoarchitecture. The proposed yield model can be used (1) to accurately estimate the raw and net array densities, and (2) to design and optimize more defect and fault-tolerant …

An Extrapolation Procedure To Shorten Time Domain Simulations, Giuseppe Selli, James L. Drewniak, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

Time-domain simulation algorithms are widely used in the anaylsis and design of electromagnetic systems. Many of them are characterized by high Q's. Thus, the simulations have to employ many time steps in order to achieve a complete characterization of these systems. This time-consuming computational effort can be avoided if the late instants of time are extrapolated by applying a parametric estimation algorithm. An optimized implementation of a time-domain extrapolation method and a stop criterion are discussed in this paper. The latter criterion is based upon a normalized squared difference between the waveforms extrapolated from two different sets of initial data …

Fdtd Method Capable Of Attaching Rectangular Domains, Kai Xiao, David Pommerenke, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

A finite-difference time-domain (FDTD) method capable of attaching rectangular computational domains is proposed herein. The aim of this approach is to reduce the size of computational domain according to the geometry of the modeled structure so as to reduce the simulation time with keeping precision of the result in an acceptable range. A multigrid algorithm is applied on the attaching interface between two rectangular domains so that different resolution can be achieved in different domains.

Modeling Issues For Full-Wave Numerical Emi Simulation, Michael A. Cracraft, Xiaoning Ye, Chen Wang, Sandeep K. R. Chandra, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

In electromagnetic modeling, agreement between modeling and measurements is a common goal. There are questions that define every model. What is to be modeled? How is it going to be modeled? At what scale is it to be modeled? Through sample results and discussion, this paper addresses some general and some specific elements of model veracity. Through determination, numerical models can certainly be pushed to match any measured results. However, in the end the question that this paper addresses is not necessarily "How good can this model be?" as it is "Is this model good enough?".

An Industrial Food Processing Plant Automation Using A Hybrid Of Pi And Fuzzy Logic Control, Ganesh K. Venayagamoorthy, D. Naidoo, P. Govender

Electrical and Computer Engineering Faculty Research & Creative Works

An industrial food processing plant consisting of nonlinear dynamics requires pressure and temperature controllers to be nonlinear. In this paper, nonlinear controllers are designed using fuzzy logic to augment the conventional pressure and temperature PI controllers for an industrial food processing plant. Simulation results are presented to show improvement in the plant response with the hybrid controllers.

Simulation Studies With A Continuously Online Trained Artificial Neural Network Controller For A Micro-Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

This paper reports on the simulation studies carried out using MATLAB/SIMULINK and the practical implementation of a continuously online trained (COT) artificial neural network (ANN) controller to identify the continuous changing complex nonlinear dynamics of the power system, and another COT ANN to control a micro-turbogenerator which consists of a turbine simulator and a micro-alternator connected to an infinite bus through a short transmission line in a laboratory environment. This neural network controller augments/replaces the traditional automatic voltage regulator (AVR) and the turbine governor of the generator. Simulation and practical results are presented to show that this COT ANN identifier/controller …

Fdtd Modeling Of Thin Wires For Simulating Common-Mode Radiation From Structures With Attached Cables, David M. Hockanson, James L. Drewniak, Todd H. Hubing, Thomas Van Doren

Electrical and Computer Engineering Faculty Research & Creative Works

The analysis of shielding enclosures is complicated by the existence of apertures and cables. The finite-difference time-domain (FDTD) method can model shielding enclosures with complex geometries, but has difficulty modeling wires and cables of arbitrary radii. Modeling the wire by setting the axial component of the electric field to zero in the FDTD results in a wire with a radius determined by the mesh discretisation. Neglecting wire radius in applications such as electromagnetic interference (EMI) or printed circuit board modeling may result in gross errors because near field quantities are typically sensitive to wire thickness. Taflove (1990) developed a wire …