Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Publication Year
- Publication
-
- Electrical and Computer Engineering Faculty Research & Creative Works (52)
- Chemical and Biochemical Engineering Faculty Research & Creative Works (4)
- Civil, Architectural and Environmental Engineering Faculty Research & Creative Works (1)
- Engineering Management and Systems Engineering Faculty Research & Creative Works (1)
- Masters Theses (1)
- Publication Type
Articles 31 - 60 of 60
Full-Text Articles in Engineering
Pulse Train™, A Novel Digital Control Method, Applied To A Discontinuous Conduction Mode Flyback Converter, Mark Telefus, Anatoly Shteynberg, Mehdi Ferdowsi, Ali Emadi
Pulse Train™, A Novel Digital Control Method, Applied To A Discontinuous Conduction Mode Flyback Converter, Mark Telefus, Anatoly Shteynberg, Mehdi Ferdowsi, Ali Emadi
Electrical and Computer Engineering Faculty Research & Creative Works
Pulse TrainTM, a new digital control technique for DC-DC converters is introduced and applied to a Flyback converter operating in discontinuous conduction mode (DCM). In contrast to the conventional analog control methods, the principal idea of this new algorithm is to use real time analysis. The proposed technique is appropriate for any converter operating in DCM. However, this work mainly focuses on Flyback converter. In this paper, the main mathematical concept of the new control algorithm is introduced and simulations as well as experimental results are presented.
Foreword Advanced Emc Numerical Modeling, Christos Christopoulos, James L. Drewniak
Foreword Advanced Emc Numerical Modeling, Christos Christopoulos, James L. Drewniak
Electrical and Computer Engineering Faculty Research & Creative Works
No abstract provided.
Electromagnetic Modeling Of Saltwater Ingress In Mortar At Microwave Frequencies, Shanup Peer, R. Zoughi, K. E. Kurtis
Electromagnetic Modeling Of Saltwater Ingress In Mortar At Microwave Frequencies, Shanup Peer, R. Zoughi, K. E. Kurtis
Electrical and Computer Engineering Faculty Research & Creative Works
Corrosion of reinforcing steel is a major cause of damage and deterioration in reinforced concrete structures. Therefore, as the presence of a sufficient concentration of chloride ions can lead to the onset of corrosion in embedded steel, it is of utmost importance to be able to determine the free salt content and its distribution in these materials. Moreover, it is important to obtain this information nondestructively. Previous investigations have shown the capability of near-field microwave nondestructive evaluation methods, using open-ended rectangular waveguide probes, to evaluate many important properties of cement-based materials. In this Investigation, the temporal microwave reflection properties of …
Over-Distention Operation Of Cascaded Multilevel Inverters, X. Kou, Keith Corzine, M. W. Wielebski
Over-Distention Operation Of Cascaded Multilevel Inverters, X. Kou, Keith Corzine, M. W. Wielebski
Electrical and Computer Engineering Faculty Research & Creative Works
Established research has shown that cascaded multilevel inverters can provide more voltage vectors per number of active semiconductors compared to typical multilevel converters. This feature is significant for increasing the drive performance as well as reducing the drive complexity and losses. When two inverters are cascaded, the maximum number of effective levels (or maximal distention operation) is the product of the number of levels of the individual inverters. It is possible to operate the cascaded inverter beyond maximum distention. The over-distention operation is desirable since it effectively increases the number of voltage levels in spite of some missing switching levels. …
A Unique Fault-Tolerant Design For Flying Capacitor Multilevel Inverters, X. Kou, Keith Corzine, Yakov L. Familiant
A Unique Fault-Tolerant Design For Flying Capacitor Multilevel Inverters, X. Kou, Keith Corzine, Yakov L. Familiant
Electrical and Computer Engineering Faculty Research & Creative Works
This paper presents a unique design for flying capacitor type multilevel inverters with fault-tolerant features. When a single-switch fault per phase occurs, the new design can still provide the same number of converting levels by shorting the fault power semiconductors and reconfiguring the gate controls. The most attractive point of the proposed design is that it can undertake the single-switch fault per phase without scarifying power converting quality. This paper also discusses the capacitor balancing approach under fault-conditions, which is an essential part of controlling flying capacitor type multilevel inverters. Suggested fault diagnosing methods are also discussed in this paper. …
Modeling Noise Coupling From Non-Parallel Pcb Trace Routing, Shaofeng Luan, Fengchao Xiao, W. Liu, Jun Fan, Yoshio Kami, James L. Drewniak, Richard E. Dubroff
Modeling Noise Coupling From Non-Parallel Pcb Trace Routing, Shaofeng Luan, Fengchao Xiao, W. Liu, Jun Fan, Yoshio Kami, James L. Drewniak, Richard E. Dubroff
Electrical and Computer Engineering Faculty Research & Creative Works
Coupling between PCB signal traces in proximity is of concern to PCB designers and EMC engineers. The behavior of noise coupling between non-parallel microstrip lines is studied in this paper by a full-wave numerical modeling method CEMPIE, designating a circuit extraction approach based on a mixed-potential integral equation formulation. Good agreement between the numerical results and measurements was obtained.
Anticipating Full Vehicle Radiated Emi From Module-Level Testing In Automobiles, Geping Liu, Chingchi Chen, Yuhua Tu, James L. Drewniak
Anticipating Full Vehicle Radiated Emi From Module-Level Testing In Automobiles, Geping Liu, Chingchi Chen, Yuhua Tu, James L. Drewniak
Electrical and Computer Engineering Faculty Research & Creative Works
EMI due to common-mode currents on cables routed in automobiles was studied using a test device designed to mimic a vehicle. Both experimental work and Finite-Difference Time-Domain (FDTD) modeling were employed in this paper. The good agreement between the measurements and modeling results indicates that the numerical tools can be a useful aid in predicting vehicle-level EMI by developing vehicle transfer functions and measuring the module-level EMI characteristics on the bench top.
Eye Pattern Evaluation In High-Speed Digital Systems Analysis By Using Mtl Modeling, Giulio Antonini, James L. Drewniak, Antonio Orlandi, Vittorio Ricchiuti
Eye Pattern Evaluation In High-Speed Digital Systems Analysis By Using Mtl Modeling, Giulio Antonini, James L. Drewniak, Antonio Orlandi, Vittorio Ricchiuti
Electrical and Computer Engineering Faculty Research & Creative Works
A method for simulating the eye pattern of high-speed digital signals propagated on printed circuit boards using multiconductor transmission-line modeling is proposed in this paper. The approach takes into account the frequency-dependent properties of the dielectric materials of the board and of the conductors. The validation is performed by comparing the modeling with measurements taken from the literature, and directly performed on test boards specially design for this study.
Extracting Cad Models For Quantifying Noise Coupling Between Vias In Pcb Layouts, Shaofeng Luan, Jun Fan, W. Liu, Fengchao Xiao, James L. Knighten, Norman W. Smith, Ray Alexander, Jim Nadolny, Yoshio Kami, James L. Drewniak
Extracting Cad Models For Quantifying Noise Coupling Between Vias In Pcb Layouts, Shaofeng Luan, Jun Fan, W. Liu, Fengchao Xiao, James L. Knighten, Norman W. Smith, Ray Alexander, Jim Nadolny, Yoshio Kami, James L. Drewniak
Electrical and Computer Engineering Faculty Research & Creative Works
A method to extract a lumped element prototype SPICE model is used to study noise coupling between non-parallel traces on a PCB. The parameters in this model are extracted using a PEEC-like approach, a Circuit Extraction approach based on a Mixed-Potential Integral Equation formulation (CEMPIE). Without large numbers of unknowns, the SPICE model saves computation time. Also, it is easy to incorporate into system SPICE net list to acquire the system simulation result considering the coupling between traces on the printed circuit board (PCB). A representative case is studied, and the comparison of measurements, CEMPIE simulation, and SPICE modeling are …
Efficient Modeling Of Discontinuities And Dispersive Media In Printed Transmission Lines, R. Araneo, Chen Wang, Xiaoxiong Gu, James L. Drewniak, S. Celozzi
Efficient Modeling Of Discontinuities And Dispersive Media In Printed Transmission Lines, R. Araneo, Chen Wang, Xiaoxiong Gu, James L. Drewniak, S. Celozzi
Electrical and Computer Engineering Faculty Research & Creative Works
The finite-difference time-domain method is applied to the analysis of transmission lines on printed circuit boards. The lossy, dispersive behavior of the dielectric substrate is accurately accounted for by means of several algorithms whose accuracy is discussed and compared. Numerical results are validated by comparisons with measurements and an equivalent circuit of slot in the ground plane is proposed.
Full Binary Combination Schema For Floating Voltage Source Multi-Level Inverters, X. Kou, Keith Corzine, Yakov L. Familiant
Full Binary Combination Schema For Floating Voltage Source Multi-Level Inverters, X. Kou, Keith Corzine, Yakov L. Familiant
Electrical and Computer Engineering Faculty Research & Creative Works
This paper presents schema of operation for floating voltage source multi-level inverters. The primary advantage of the proposed schema is that the number of voltage levels (and thus power quality) can be increased for a given number of semiconductor devices when compared to the conventional "flying capacitor" topology. However, the new schema requires fixed floating sources instead of capacitors and therefore is more suitable for battery power applications such as electric vehicles, flexible AC transmission systems and submarine propulsion. Alternatively transformer/rectifier circuits may be used to supply the floating sources in a similar way to cascaded H-bridge inverters. Computer simulation …
A Cascaded Converter-Based Statcom With Energy Storage, Chang Qian, Mariesa Crow
A Cascaded Converter-Based Statcom With Energy Storage, Chang Qian, Mariesa Crow
Electrical and Computer Engineering Faculty Research & Creative Works
Due to their advantages in high power applications, multi-level converters have been introduced to flexible AC Transmission Systems (FACTS) to enhance power transmission system operation. Although several multi-level StatCom topologies have been proposed to verify the high performance of multi-level converters used in reactive power compensation, they are not capable of controlling active power flow. To make multi-level converters more flexible and effective for active power flow control, energy storage systems, such as flywheels and batteries are incorporated into StatComs. In this paper, battery energy storage systems (BESS) are incorporated into a cascaded converter-based StatCom to implement both active and …
Dc Power-Bus Design Using Fdtd Modeling With Dispersive Media And Surface Mount Technology Components, Xiaoning Ye, Marina Koledintseva, Min Li, James L. Drewniak
Dc Power-Bus Design Using Fdtd Modeling With Dispersive Media And Surface Mount Technology Components, Xiaoning Ye, Marina Koledintseva, Min Li, James L. Drewniak
Electrical and Computer Engineering Faculty Research & Creative Works
DC power-bus modeling in high-speed digital design using the finite-difference time-domain (FDTD) method is demonstrated herein. The dispersive character of the dielectric layers used in printed circuit board substrates is taken into account in this study. In particular, FR-4 is considered. The complex permittivity of the dielectric is approximated by a Debye model. A wide-band frequency response (100 MHz-5 GHz) is obtained through a single FDTD simulation. Good agreement is achieved between the modeled and measured results for a typical dc power-bus structure with multiple surface mount technology (SMT) decoupling capacitors placed on the printed circuit board (PCB). The FDTD …
Proxy Servers For Scalable Interactive Video Support, Husni Fahmi, Mudassir Latif, Sahra Sedigh, Arif Ghafoor, Peiya Liu, Liang Hsu
Proxy Servers For Scalable Interactive Video Support, Husni Fahmi, Mudassir Latif, Sahra Sedigh, Arif Ghafoor, Peiya Liu, Liang Hsu
Electrical and Computer Engineering Faculty Research & Creative Works
Targeting scalability, load balance and resource efficiency in streaming multimedia applications, proxy servers facilitate faster real-time access to cached objects and reduce response time to document requests.
Applying The Method Of Moments And The Partial Element Equivalent Circuit Modeling Techniques To A Special Challenge Problem Of A Pc Board With Long Wires Attached, Yun Ji, Bruce Archambeault, Todd H. Hubing
Applying The Method Of Moments And The Partial Element Equivalent Circuit Modeling Techniques To A Special Challenge Problem Of A Pc Board With Long Wires Attached, Yun Ji, Bruce Archambeault, Todd H. Hubing
Electrical and Computer Engineering Faculty Research & Creative Works
This paper investigates a canonical printed circuit board (PCB) problem using both a method of moments (MoM) and a partial element equivalent circuit (PEEC) modeling technique. The problem consists of a PCB populated with three traces. One trace is a signal line and the other two are I/O lines that couple to the signal line and extend beyond the boundary of the board. Although the MoM code was a frequency domain code and the PEEC code was a time-domain code, good agreement was achieved in both the time-domain and the frequency-domain
Dc Power Bus Modeling Using A Circuit Extraction Approach Based On A Mixed-Potential Integral Equation Formulation And An Iterative Equation Solver, Jun Fan, James L. Drewniak, James L. Knighten
Dc Power Bus Modeling Using A Circuit Extraction Approach Based On A Mixed-Potential Integral Equation Formulation And An Iterative Equation Solver, Jun Fan, James L. Drewniak, James L. Knighten
Electrical and Computer Engineering Faculty Research & Creative Works
A quick and simple approach is developed to perform circuit simulations for an equivalent circuit extracted from a first principles formulation for DC power bus structures. The simulations are done by solving the system equation using an iterative method. Good agreement between modeling and measurements demonstrate the effectiveness of the method, which is very suitable and computationally efficient for frequency-domain DC power modeling.
Dc Power Bus Design With Fdtd Modeling Including A Dispersive Media, Xiaoning Ye, Jun Fan, Marina Koledintseva, James L. Drewniak
Dc Power Bus Design With Fdtd Modeling Including A Dispersive Media, Xiaoning Ye, Jun Fan, Marina Koledintseva, James L. Drewniak
Electrical and Computer Engineering Faculty Research & Creative Works
DC power-bus modeling in high-speed digital design using the FDTD method is reported here. The dispersive medium is approximated by a Debye model to account for the loss. A wide band frequency response (100 MHz-5 GHz) is obtained through a single FDTD simulation. Favorable agreement is achieved between the modeled and measured results for a typical DC power-bus structure with multiple SMT decoupling capacitors mounted on the board. The FDTD tool is then applied to investigate the effects of local decoupling on a DC power-bus. The modeled results agree with the results from another modeling tool, the CEMPIE (a circuit …
Behavioral Igbt Modeling For Predicting High Frequency Effects In Motor Drives, Jerry L. Tichenor, S. D. Sudhoff, James L. Drewniak
Behavioral Igbt Modeling For Predicting High Frequency Effects In Motor Drives, Jerry L. Tichenor, S. D. Sudhoff, James L. Drewniak
Electrical and Computer Engineering Faculty Research & Creative Works
A first-order behavioral IGBT/gate drive model is proposed together with a procedure for deriving all model parameters. Despite the simplicity of the proposed model, comparison of model predictions with hardware measurements demonstrate the model to be accurate in predicting turn-on and turn-off transients.
Control Of Statcom With Energy Storage Device, Chen Shen, Zhiping Yang, Stan Atcitty, Mariesa Crow
Control Of Statcom With Energy Storage Device, Chen Shen, Zhiping Yang, Stan Atcitty, Mariesa Crow
Electrical and Computer Engineering Faculty Research & Creative Works
In this paper, the control method of a STATCOM with an energy storage device is discussed. To determine the switching level control, UPWM (unique pulse width modulation) and SPWM (sinusoidal pulse width modulation) methods are compared. A linearized model of a STATCOM with a battery is set up to derive monitoring level control strategies. All the control methods are verified by the PSCAD/EMTDC software package.
A Continually Online Trained Artificial Neural Network Identifier For A Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley
A Continually Online Trained Artificial Neural Network Identifier For A Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley
Electrical and Computer Engineering Faculty Research & Creative Works
The increasing complexity of modern power systems highlights the need for advanced modelling techniques for effective control of power systems. This paper presents results of simulation and practical studies carried out on identifying the dynamics of a single turbogenerator connected to an infinite bus through a short transmission line, using a continually online trained (COT) artificial neural network (ANN).
Design Of Airflow Aperture Arrays In Shielding Enclosures, Min Li, S. Radu, J. Neubel, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Design Of Airflow Aperture Arrays In Shielding Enclosures, Min Li, S. Radu, J. Neubel, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Electrical and Computer Engineering Faculty Research & Creative Works
EMI through perforation patterns for airflow in shielding enclosures resulting from coupling of interior sources is investigated numerically with FDTD simulations and experimentally. The FDTD simulations are compared with measurements on perforation patterns. A simple empirical design approach for the relation between aperture size, the number of apertures and shielding effectiveness is extracted. A double perforation pattern structure is proposed for perforation pattern designs where a high percentage of open area is required. Frequencies where the enclosure will support cavity modes are of primary concern.
Radiation Imaging Operators Applied To The Detection Of Velocity And Density Contrast Boundaries, Md. Ishfaqur Raza, Richard E. Dubroff, James L. Drewniak
Radiation Imaging Operators Applied To The Detection Of Velocity And Density Contrast Boundaries, Md. Ishfaqur Raza, Richard E. Dubroff, James L. Drewniak
Electrical and Computer Engineering Faculty Research & Creative Works
A procedure for imaging interfaces formed by simultaneous density and velocity contrasts in acoustic media is described. The procedure is based on the properties of radiation imaging operators - a class of linear differential operators parametrically dependent on the acoustic properties of the media. An example of this procedure is demonstrated through the use of numerical simulation. Results, in the form of interface images, are shown, assuming the bulk acoustic characteristics (velocity and density) on both sides of the interface are known.
Emi From Apertures At Enclosure Cavity Mode Resonances, Min Li, Yun Ji, S. Radu, Joe Nuebel, Wei Cui, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Emi From Apertures At Enclosure Cavity Mode Resonances, Min Li, Yun Ji, S. Radu, Joe Nuebel, Wei Cui, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Electrical and Computer Engineering Faculty Research & Creative Works
EMI from slots and apertures resulting from coupling of interior sources through enclosure cavity modes in a Sun S-1000 workstation was investigated. The excitation of a specially designed rectangular enclosure with a slot was also studied experimentally and with finite-difference time-domain (FDTD) simulations. The radiated power results for both the S-1000 and simple rectangular enclosure indicate that radiation at cavity mode resonance frequencies through slots and apertures can be as significant as at aperture or slot resonances. A decrease of the radiation through the slots and apertures can be achieved by employing a lossy material in the enclosure.
An Expert System For Predicting Radiated Emi From Pcb's, Navin Kashyap, Todd H. Hubing, James L. Drewniak, Thomas Van Doren
An Expert System For Predicting Radiated Emi From Pcb's, Navin Kashyap, Todd H. Hubing, James L. Drewniak, Thomas Van Doren
Electrical and Computer Engineering Faculty Research & Creative Works
This paper describes an expert systems approach, based on symbolic reasoning techniques, to the problem of predicting radiated EMI levels from printed circuit boards. The expert system, currently under development at the University of Missouri-Rolla, USA, starts by extracting board geometry information from the board layout files. This information is fed into the classification algorithm, which determines the signal properties and nature of each net, using the knowledge stored in the knowledge base. The evaluation algorithm uses the available in formation to identify and evaluate critical circuit geometries, and then estimates the effect that these geometries have on system radiation …
Lumped-Element Sections For Modeling Coupling Between High-Speed Digital And I/O Lines, Wei Cui, Hao Shi, Xiao Luo, Fei Sha, James L. Drewniak, Thomas Van Doren, T. Anderson
Lumped-Element Sections For Modeling Coupling Between High-Speed Digital And I/O Lines, Wei Cui, Hao Shi, Xiao Luo, Fei Sha, James L. Drewniak, Thomas Van Doren, T. Anderson
Electrical and Computer Engineering Faculty Research & Creative Works
Lumped-element sections are used for modeling coupling between high-speed digital and I/O lines on printed circuit boards (PCBs) in this paper. Radiated electromagnetic interference (EMI) is investigated when the I/O line going off the board is driven as an unintentional, but effective antenna. Simulated results are compared with measurements for coupled lines. A suitable number of lumped-element sections for modeling is chosen based on the line length and the highest frequency of interest.
Comparison Of Fdtd Algorithms For Subcellular Modeling Of Slots In Shielding Enclosures, Kuang-Ping Ma, Min Li, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Comparison Of Fdtd Algorithms For Subcellular Modeling Of Slots In Shielding Enclosures, Kuang-Ping Ma, Min Li, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Electrical and Computer Engineering Faculty Research & Creative Works
Subcellular modeling of thin slots in the finite-difference time-domain (FDTD) method is investigated. Two subcellular algorithms for modeling thin slots with the FDTD method are compared for application to shielding end osures in electromagnetic compatibility (EMC). The stability of the algorithms is investigated, and comparisons between the two methods for slots in planes, and slots in loaded cavities are made. Results for scattering from a finite-length slot in an infinite plane employing one of the algorithms are shown to agree well with published experimental results, and power delivered to an enclosure with a slot agree well with results measured for …
Simulation And Measurement For Decoupling On Multilayer Pcb Dc Power Buses, Hao Shi, F. Yuan, Fei Sha, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Simulation And Measurement For Decoupling On Multilayer Pcb Dc Power Buses, Hao Shi, F. Yuan, Fei Sha, James L. Drewniak, Todd H. Hubing, Thomas Van Doren
Electrical and Computer Engineering Faculty Research & Creative Works
DC power bus decoupling of a multi-layer PCB is modeled by a combination of a lumped circuit model at low frequencies ( < 200 MHz), and a mixed-potential integral equation approach at high frequencies. In order to determine the lumped parameters of via interconnects, an effective procedure using a network analyzer has been developed to characterize the trace/via inductances/resistances. For an 8 inch × 10 inch ten-layer test board used in this study, the simulations show good agreement with the measurement. This method can lead to new design strategies of decoupling for multilayer PCB power buses.
Transient And Dynamic Average-Value Modeling Of Synchronous Machine Fed Load-Commutated Converters, Keith Corzine, S. D. Sudhoff, H. J. Hegner, D. E. Delisle
Transient And Dynamic Average-Value Modeling Of Synchronous Machine Fed Load-Commutated Converters, Keith Corzine, S. D. Sudhoff, H. J. Hegner, D. E. Delisle
Electrical and Computer Engineering Faculty Research & Creative Works
A new average-value model of a synchronous machine fed load-commutated converter is set forth in which the stator dynamics are combined with the DC link dynamics. This model is shown to he extremely accurate in predicting system transients and in predicting frequency-domain characteristics such as the impedance looking into the synchronous machine fed load-commutated converter. The model is verified against a detailed computer simulation and against a hardware test system, thus providing a three-way comparison. The proposed model is shown to be much more accurate than models in which the stator dynamics are neglected
Analysis Of A Current-Regulated Brushless Dc Drive, Keith Corzine, S. D. Sudhoff, H. J. Hegner
Analysis Of A Current-Regulated Brushless Dc Drive, Keith Corzine, S. D. Sudhoff, H. J. Hegner
Electrical and Computer Engineering Faculty Research & Creative Works
Current-regulated brushless DC machines are used in a wide variety of applications including robotics, actuators, electric vehicles, and ship propulsion systems. When conducting system analysis of this or any other type of drive, average-value reduced-order models are invaluable since they provide a means of rapidly predicting the electromechanical dynamics and are readily linearized for control system synthesis. In this paper, a highly accurate average-value reduced-order model of a hysteresis current-regulated brushless DC drive is set forth. In so doing it is demonstrated that the drive exhibits five distinct operating modes. The physical cause of each of these modes is explained …
A Flux-Weakening Strategy For Current-Regulated Surface-Mounted Permanent-Magnet Machine Drives, Keith Corzine, S. D. Sudhoff, H. J. Hegner
A Flux-Weakening Strategy For Current-Regulated Surface-Mounted Permanent-Magnet Machine Drives, Keith Corzine, S. D. Sudhoff, H. J. Hegner
Electrical and Computer Engineering Faculty Research & Creative Works
Permanent-magnet synchronous machines fed from current-regulated converters feature nearly ideal performance at low-to-moderate speeds. However, as rotor speed increases the back emf rises which results in loss of current regulation and decreased torque. In buried-magnet machine drives, flux weakening is often used to extend the speed range. This paper sets forth a flux-weakening control specifically designed for surface-mounted permanent-magnet machines which is simple and does not require knowledge of the machine or system parameters. The proposed method is demonstrated both experimentally and through the use of computer simulation