Engineering Commons^™

Defects Classification Of Laser Metal Deposition Using Acoustic Emission Sensor, Haythem Gaja, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser metal deposition (LMD) is an advanced additive manufacturing (AM) process used to build or repair metal parts layer by layer for a range of different applications. Any presence of deposition defects in the part produced causes change in the mechanical properties and might cause failure to the part. In this work, defects monitoring system was proposed to detect and classify defects in real time using an acoustic emission (AE) sensor and an unsupervised pattern recognition analysis. Time domain and frequency domain, and relevant descriptors were used in the classification process to improve the characterization and the discrimination of the …

Realizing Structural Color Generation With Aluminum Plasmonic V-Groove Metasurfaces, W. Wang, D. Rosenmann, D. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Magnetic Control Of Lateral Migration Of Ellipsoidal Microparticles In Microscale Flows, R. Zhou, C. A. Sobecki, J. Zhang, Yanzhi Zhang, Cheng Wang

Mathematics and Statistics Faculty Research & Creative Works

No abstract provided.

Broadband Polarization Conversion With Anisotropic Plasmonic Metasurfaces, W. Cao, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Klein Tunneling Near The Dirac Points In Metal-Dielectric Multilayer Metamaterials, L. Sun, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Structural Vs.. Compositional Disorder In Thermal Conductivity Reduction Of Sige Alloys, Jihui Nie, Raghavan Ranganathan, Zhi Liang, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We Use Equilibrium Molecular Dynamics Simulations to Determine the Relative Role of Compositional and Structural Disorder in a Phononic Thermal Conductivity Reduction by Studying Three 50-50 SiGe Alloy Structures: Ordered Alloys, Disordered Alloys, and Amorphous Alloys, as Well as Pure Amorphous Si and Ge Structures for Reference. While Both Types of Disorders Significantly Reduce Thermal Conductivity, Structural Disorder is Much More Effective to This Aim. the Examination of Phonon Lifetimes in Disordered Alloys Shows High Values in a Low Frequency Regime Governed by Umklapp Scattering that Are Reduced Rapidly with Increasing Frequency Following Rayleigh Scattering Behavior. the Local Properties Analysis …

Novel Layered Double Hydroxides-Hydroxyapatite/Gelatin Bone Tissue Engineering Scaffolds: Fabrication, Characterization, And In Vivo Study, Fateme Fayyazbakhsh, Mehran Solati-Hashjin, Abbas Keshtkar, Mohammad Ali Shokrgozar, Mohammad Mehdi Dehghan, Bagher Larijani

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Developing Porous Biodegradable Scaffolds through Simple Methods is One of the Main Approaches of Bone Tissue Engineering (BTE). in This Work, a Novel BTE Composite Containing Layered Double Hydroxides (LDH), Hydroxyapatite (HA) and Gelatin (GEL) Was Fabricated using Co-Precipitation and Solvent-Casting Methods. Physiochemical Characterizations Showed that the Chemical Composition and Microstructure of the Scaffolds Were Similar to the Natural Spongy Bone. Interconnected Macropores Ranging over 100 to 600 Μm Were Observed for Both Scaffolds While the Porosity of 90 ± 0.12% and 92.11 ± 0.15%, as Well As, Young's Modulus of 19.8 ± 0.41 and 12.5 ± 0.35 GPa Were …

Effect Of Wall Cooling On Boundary-Layer-Induced Pressure Fluctuations At Mach 6, C. Zhang, Lian Duan, M. Choudhari

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Stair Negotiation Made Easier Using Novel Interactive Energy-Recycling Assistive Stairs, Yun Seong Song, Sehoon Ha, Hsiang Hsu, Lena H. Ting, C. Karen Liu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Here we show that novel, energy-recycling stairs reduce the amount of work required for humans to both ascend and descend stairs. Our low-power, interactive, and modular steps can be placed on existing staircases, storing energy during stair descent and returning that energy to the user during stair ascent. Energy is recycled through event-triggered latching and unlatching of passive springs without the use of powered actuators. When ascending the energy-recycling stairs, naive users generated 17.4 ± 6.9% less positive work with their leading legs compared to conventional stairs, with the knee joint positive work reduced by 37.7 ± 10.5%. Users also …

Solvent Based 3d Printing Of Biopolymer/Bioactive Glass Composite And Hydrogel For Tissue Engineering Applications, Krishna Kolan, Yong Liu, Jakeb Baldridge, Caroline Murphy, Julie A. Semon, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Three-dimensional (3D) bioprinting is an emerging technology in which scaffolding materials and cell-laden hydrogels may be deposited in a pre-determined fashion to create 3D porous constructs. A major challenge in 3D bioprinting is the slow degradation of melt deposited biopolymer. In this paper, we describe a new method for printing poly-caprolactone (PCL)/bioactive borate glass composite as a scaffolding material and Pluronic F127 hydrogel as a cell suspension medium. Bioactive borate glass was added to a mixture of PCL and organic solvent to make an extrudable paste using one syringe while hydrogel was extruded and deposited in between the PCL/borate glass …

Quasistatic Error Modeling And Model Testing For A 5-Axis Machine, H-W. Ko, P. Bazzoli, Jared Adam Nisbett, L. Ma, Douglas A. Bristow, Robert G. Landers, Y. Chen, S. Kapoor, P. F. Ferreira

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Infrared Metasurfaces Created With Off-Normal Incidence Microsphere Photolithography, Chuang Qu, Edward C. Kinzel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fabricating metasurfaces over large areas at low costs remains a critical challenge to their practical implementation. This paper reports on the use of microsphere photolithography (MPL) to create infrared metasurfaces by changing the angle-of-incidence of the illumination to steer the photonic jet. The displacement of the photonic jet is shown to scale with the diameter of the microsphere while the exposure dose scales with the square of the microsphere diameter. This process is robust in the presence of local defects in the microsphere lattice. The paper demonstrates patterning split ring resonators and tripole based metasurfaces using MPL, which are fabricated …

Fabrication And Characterization Of Alₓcofenicu₁₋ₓ High Entropy Alloys By Laser Metal Deposition, X. Chen, L. Yan, S. Karnati, Y. Zhang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Phonon Interference In Crystalline And Amorphous Confined Nanoscopic Films, Zhi Liang, Thomas E. Wilson, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Molecular Dynamics Phonon Wave Packet Simulations, We Study Phonon Transmission Across Hexagonal (H)-BN and Amorphous Silica (A-SiO₂) Nanoscopic Thin Films Sandwiched by Two Crystalline Leads. Due to the Phonon Interference Effect, the Frequency-Dependent Phonon Transmission Coefficient in the Case of the Crystalline Film (Si|h-BN|Al Heterostructure) Exhibits a Strongly Oscillatory Behavior. in the Case of the Amorphous Film (Si|a-SiO₂|Al and Si|a-SiO₂|Si Heterostructures), in Spite of Structural Disorder, the Phonon Transmission Coefficient Also Exhibits Oscillatory Behavior at Low Frequencies (Up to ∼1.2 THz), with a Period of Oscillation Consistent with the Prediction from the Two-Beam …

Work Zone Simulator Analysis: Driver Performance And Acceptance Of Missouri Alternate Lane Shift Configurations, Suzanna Long, Ruwen Qin, Dincer Konur, Ming-Chuan Leu, S. Moradpour, S. Thind, H. Nadathur

Engineering Management and Systems Engineering Faculty Research & Creative Works

The objective of this project is to evaluate MoDOT’s alternate lane shift sign configuration for work zones. The single signproposed by MoDOT provides the traveler with enough information to let them know that all lanes are available to shift around thework zone, whereas the MUTCD signs require drivers to see two signs. This research simulation project evaluates the drivers’ laneshifting performance and acceptance of the alternate lane shift sign proposed by MoDOT to be used on work zones as compared tothe MUTCD lane shift signs. Based on the study results, no difference was observed between MUTCD lane shift sign andMoDOT …

Control Of Single- And Dual-Probe Atomic Force Microscopy, Muthukumaran Loganathan

Doctoral Dissertations

“Atomic force microscope (AFM) is one of the important and versatile tools available in the field of nanotechnology. It is a type of probe-based microscopy wherein an atomically sharp tip, mounted on the free end of a microcantilever, probes the surface of interest to generate 3D topographical images with nanoscale resolution. An integral part of the AFM is the feedback controller that regulates the probe deflection in the presence of surface height changes, enabling the control action to be used for generating topographical image of the sample. Besides sensing, the probe can also be used as a mechanical actuator to …

Nanoparticle-Induced Unusual Melting And Solidification Behaviours Of Metals, C. Ma, Lianyi Chen, C. Cao, X.C. Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Additive Manufacturing Of Glass Using A Filament Fed Process, Junjie Luo

Doctoral Dissertations

"There are many scientific and engineering applications of glass including optics, communications, electronics, and hermetic seals, there has been minimal research towards the Additive Manufacturing (AM) of transparent glass parts. The special thermal and optical properties of glasses make them hard to be printed using conventional AM techniques. In this dissertation, two different AM techniques for glass AM were developed, Selective Laser Melting (SLM) and filament fed process.

Semi-transparent parts were printed with SLM process. However, the filament fed process was found to be more robust and promising for printing optically transparent glass parts. Therefore, this dissertation is focused on …

3d Bioprinting Of Stem Cells And Polymer/Bioactive Glass Composite Scaffolds For Bone Tissue Engineering, Caroline Murphy, Krishna Kolan, Wenbin Li, Julie A. Semon, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

A major limitation of using synthetic scaffolds in tissue engineering applications is insufficient angiogenesis in scaffold interior. Bioactive borate glasses have been shown to promote angiogenesis. There is a need to investigate the biofabrication of polymer composites by incorporating borate glass to increase the angiogenic capacity of the fabri-cated scaffolds. In this study, we investigated the bioprinting of human adipose stem cells (ASCs) with a polycaprolac-tone (PCL)/bioactive borate glass composite. Borate glass at the concentration of 10 to 50 weight %, was added to a mixture of PCL and organic solvent to make an extrudable paste. ASCs suspended in Matrigel …

Continuous Focusing And Separation Of Microparticles With Acoustic And Magnetic Fields, Ran Zhou

Doctoral Dissertations

"Microfluidics enables a diverse range of manipulations (e.g., focusing, separating, trapping, and enriching) of micrometer-sized objects, and has played an increasingly important role for applications that involve single cell biology and the detection and diagnosis of diseases. In microfluidic devices, methods that are commonly used to manipulate cells or particles include the utilization of hydrodynamic effects and externally applied field gradients that induce forces on cells/particles, such as electrical fields, optical fields, magnetic fields, and acoustic fields.

However, these conventional methods often involve complex designs or strongly depend on the properties of the flow medium or the interaction between the …

Event-Triggering Architectures For Adaptive Control Of Uncertain Dynamical Systems, Ali Talib Oudah Albattat

Doctoral Dissertations

"In this dissertation, new approaches are presented for the design and implementation of networked adaptive control systems to reduce the wireless network utilization while guaranteeing system stability in the presence of system uncertainties. Specifically, the design and analysis of state feedback adaptive control systems over wireless networks using event-triggering control theory is first presented. The state feedback adaptive control results are then generalized to the output feedback case for dynamical systems with unmeasurable state vectors. This event-triggering approach is then adopted for large-scale uncertain dynamical systems. In particular, decentralized and distributed adaptive control methodologies are proposed with reduced wireless network …

Characterization And Numerical Simulation Of The Microstructural And Micromechanical Viscoelastic Behavior Of Oil Sands Using The Discrete Element Method, Eric Kofi Gbadam

Doctoral Dissertations

"Oil sands are naturally geologic formations of predominantly quartz sand grains whose void spaces are filled with bitumen, water, and dissolved gases. The electric rope shovel is the primary equipment used for excavating the Athabasca oil sand formations. The equipment's static and dynamic loads are transferred to the formation during excavation and propel. These loads cause ground instability leading to sinkage or rutting, crawler wear, and fracture failures. These problems result in unplanned downtimes, production losses, and high maintenance costs. In order to address these problems, there is a need to develop valid models that capture the behavior and performance …

Reliability Prediction In Early Design Stages, Yao Cheng

Doctoral Dissertations

"In the past, reliability is usually quantified with sufficient information available. This is not only time-consuming and cost-expensive, but also too late for occurred failures and losses. For solving this problem, the objective of this dissertation is to predict product reliability in early design stages with limited information. The current research of early reliability prediction is far from mature. Inspired by methodologies for the detail design stage, this research uses statistics-based and physics-based methodologies by providing general models with quantitative results, which could help design for reliability and decision making during the early design stage. New methodologies which accommodate component …

Dynamic Electromechanical Characterization Of Ferroelectrics At Cryogenic Temperatures, William Kent Hays

Masters Theses

"Electromechanical coupling in ferroelectric materials has given rise to a myriad of technological applications. Through the complex domain structure of ferroelectrics materials, which are typically stiff and have low damping, can exhibit significant structural damping. The applications for a material with a relatively large Young’s modulus and the ability to damp out vibrations would be useful for structures, more specifically, aerospace structures. The dynamic mechanical properties of ferroelectrics, particularly mechanical properties while an electric field is applied, are not well understood. This is due in part to the lack of experimental methods to measure such properties. Even with recent advancements …

Ti-Fe Intermetallics Analysis And Control In Joining Titanium Alloy And Stainless Steel By Laser Metal Deposition, Wei Li

Masters Theses

"Direct fusion joining titanium alloy and stainless steel can cause brittle Ti-Fe intermetallics which compromise the mechanical properties of diffusion bonds between titanium alloys and stainless steel. Therefore, filler metals are required as transition layers. In this research, stainless steel metallic powder was directly deposited on the titanium alloy substrate by laser beam, the Ti-Fe intermetallic phases formed in this process were investigated through analyzing fracture morphology, phase identification, and Vickers Hardness Number (VHN). After that, Laser Metal Deposition (LMD) was applied to explore a new fabricating process to join Ti6Al4V and SS316. A transition composition route was introducedTi6Al4V → …

Design And Analysis Of A Passive Heat Removal System For A Small Modular Reactor Using Star Ccm+, Raymond Michael Fanning

Masters Theses

"Next generation nuclear power plants, specifically small modular reactor designs, are the best alternative to fossil fuels for power generation due to their power density and low carbon emissions and constant awareness of safety concerns. A promising safety feature of new designs is the removal of heat by passive systems in accident scenarios. The passive systems require no moving parts and no intervention by personnel. These systems must be accurately simulated for better understanding of the heat transport phenomena: natural convection cooling. Due to the fact that most work developing these passive heat removal systems are proprietary information, a passive …

Cyber-Physical Manufacturing Cloud: An Efficient Method Of Building Digital Twin For 3d Printer By Adapting Mtconnect Protocol, Liwen Hu

Masters Theses

"The common modeling of a virtual machine is using an information model to describe the physics of machines. The integration of digital twins into productive cyber-physical cloud manufacturing (CPCM) systems imposes strict requirements such as reducing overhead and saving resources for the systems. In this paper, we investigate a new method for building cloud-based digital twins (CBDT), which can be adapted to the CPCM platform. Our method helps reduce computing resources in the processing center and guarantees the fastest speed of the interactions between the human users and physical machines. We introduce a knowledge resource center (KRC) built on a …

Error Mapping Of Build Volume In Selective Laser Melting, Ninad Kulkarni

Masters Theses

“Selective laser melting is one of the commonly used additive manufacturing processes employed for production of functional part. Therefore, quality aspects such as dimensional accuracy have become a point of great interest. Like all of the other additive manufacturing processes selective laser melting process suffers from the issue if having wide range of process parameters making the process control a complex task. Additionally, issues specific to the selective laser melting process such as position dependency of accuracy of the part, makes it difficult to predict the resulting dimensional inconsistencies in the part manufactured by this processes. This research is an …

Processing, Microstructure, And Mechanical Properties Of Zirconium Diboride-Molybdenum Disilicide Ceramics And Dual Composite Architectures, Ryan Joseph Grohsmeyer

Doctoral Dissertations

"This research had two objectives: characterization of processing-microstructure-mechanical property relationships of conventional ZrB₂-MoSi₂ ceramics at room temperature (RT) and 1500⁰C in air, and fabrication of ZrB₂-MoSi₂ dual composite architectures (DCAs) for use near 1500⁰C. Elastic moduli, fracture toughness, and flexure strength were measured at RT and 1500⁰C for 15 ZrB₂-MoSi₂ ceramics hot pressed using fine, medium, or coarse ZrB₂ starting powder with 5-70 vol.% MoSi₂, referred to as FX, MX, and CX respectively where X is the nominal MoSi₂ content. MoSi₂ decomposed during sintering, resulting in …

Optimal Design And Freeform Extrusion Fabrication Of Functionally Gradient Smart Parts, Amir Ghazanfari

Doctoral Dissertations

"An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density was developed. In this process, an aqueous paste of ceramic particles with a very low binder content (<1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, it is surrounded by oil (to a level just below the top surface of most recent layer) to preclude non-uniform evaporation from the sides. Infrared radiation is then used to partially, and uniformly, dry the just-deposited layer so that the yield stress of the paste increases and the part maintains its shape. The same procedure is repeated for every layer until part fabrication is completed. Sample parts made of alumina and fully stabilized zirconia were produced using this process and their mechanical properties including density, strength, Young's modulus, Weibull modulus, toughness, and hardness were examined. Microstructural evaluation was also performed to measure the grain size, and critical flaw sizes were obtained. The results indicate that the proposed method enables fabrication of geometrically complex parts with superior mechanical properties. Furthermore, several methods were developed to increase the productivity of the CODE process and enable manufacturing of functionally graded materials with an optimum distribution of material composition. As an application of the CODE process, advanced ceramic components with embedded sapphire optical fiber sensors were fabricated and properties of parts and sensors were evaluated using standard test methods"--Abstract, page iv.