Engineering Commons^™

Standard Penetration Test-Based Probabilistic And Deterministic Assessment Of Seismic Soil Liquefaction Potential, K. Onder Cetin, Raymond B. Seed, Armen Der Kiureghian, Kohji Tokimatsu, Leslie F. Harder, Jr., Robert E. Kayen, Robb E. S. Moss

Civil and Environmental Engineering

This paper presents new correlations for assessment of the likelihood of initiation (or “triggering”) of soil liquefaction. These new correlations eliminate several sources of bias intrinsic to previous, similar correlations, and provide greatly reduced overall uncertainty and variance. Key elements in the development of these new correlations are (1) accumulation of a significantly expanded database of field performance case histories; (2) use of improved knowledge and understanding of factors affecting interpretation of standard penetration test data; (3) incorporation of improved understanding of factors affecting site-specific earthquake ground motions (including directivity effects, site-specific response, etc.); (4) use of improved methods for …

Lead-Free Solder Joint Reliability – State Of The Art And Perspectives, Jianbiao Pan, Jyhwen Wang, David M. Shaddock

Industrial and Manufacturing Engineering

There is an increasing demand in replacing tin-lead (Sn/Pb) solders with lead-free solders in the electronics industry due to health and environmental concern. The European Union recently passed a law to ban the use of lead in electronic products. The ban will go into effect in July of 2006. The Japanese electronics industry has worked to eliminate lead from consumer electronic products for several years. Although currently there are no specific regulations banning lead in electronics devices in the United States, many companies and consortiums are working on lead-free solder initiatives including Intel, Motorola, Agilent Technologies, General Electric, Boeing, NEMI …

Rapid Field Evaluation Of Drip And Microspray Distribution Uniformity, Charles M. Burt

BioResource and Agricultural Engineering

The Cal Poly ITRC irrigation evaluation programs have been widely used to assess the global distribution uniformity (DU) of drip and microsprayer irrigation systems. The field procedures and formulas used in the program are presented in this paper. The system DU is estimated by mathematically combining the component DU values. DU components include pressure differences, "other causes" (such as manufacturing variation, plugging, and wear), unequal drainage, and unequal application rates. Results are presented from evaluations by several entities, including Cal Poly ITRC. Cal Poly evaluations of 329 fields provided an average DU_lq of 0.85 for drip and 0.80 for …

Improvement Of Parameter Estimation For Non-Linear Hysteretic Systems With Slip By A Fast Bayesian Bootstrap Filter, S. J. Li, Yoshiyuki Suzuki, Mohammad N. Noori

Office of the Dean (CENG) Scholarship

Modeling and identification of non-linear hysteretic systems are widely encountered in the structural dynamics field, especially for the hysteresis with slip. A model, called SL model, which can describe the pinching of most practical hysteresis loops perfectly was proposed by Baber and Noori (J. Eng. Mech. 111 (1985) 1010). A method of estimating the parameters of SL model on the basis of input–output data based on bootstrap filter was proposed by the writers. Bootstrap filter is a filtering method based on Bayesian state estimation and Monte Carlo method, which has the great advantage of being able to handle any functional …

The Role Of Moral Philosophy In Promoting Academic Integrity Among Engineering Students, Brian K. Etter, Trevor S. Harding, Cynthia J. Finelli, Donald D. Carpenter

Materials Engineering

Academic dishonesty is nothing new, yet it is particularly disturbing to find among engineering students, whose professional lives need to be guided by the highest ethical standards. Moral philosophy may illuminate some of the conditions for recovering a sense of the ethical for engineering students. Classical moral philosophers held that people belong to communities in ways that inform their sense of obligation. Recognition of these communities would make concrete the engineer's responsibility for the health, safety and welfare of the public. A further difficulty is that the primary community that students know is simply that of their peers in school …

Work In Progress – Classical Ballet Structure And Practice Applied To Engineering Class Sessions, Blair London, Lisa Deyo

Materials Engineering

Classical ballet classes have a universal structure that fosters active in-class learning. This structure creates a safe environment for students to try, fail, be corrected, and succeed. Engineering classes lack a common structure; most learning in engineering occurs outside of class. Engineering classes could move toward adopting a similar structure to ballet to improve in-class learning and mirror engineering culture and practice. The paper describes aspects of ballet class structure and practices that work and how these can apply to engineering classes. A new engineering class session structure is presented following the ballet model where engineering students are motivated to …

Work In Progress: Combining Concept Inventories With Rapid Feedback To Enhance Learning, John Chen, Jennifer Kadlowec, Dexter Whittinghill

Mechanical Engineering

In this project our goal is to adapt the Concept Inventory for frequent classroom use, and to implement it in a system to provide rapid feedback to students of their understanding of key concepts being presented. The feedback system acts as the focal point and catalyst to encourage students, working in pairs, to assist each other in correcting misconceptions or deepening each other’s understanding of the topic at hand. Furthermore, the system allows the professor to assess the students’ level of comprehension (or misconception) in a just-in-time fashion, and thus guides his or her pacing and coverage of the material. …

Reflectivity Characterization And Identification Of Primary Reflection Path In Anechoic Chamber Analysis, Aloysius Aragon Lubiano, Christopher R. Brito, Newlyn Hui, Dean Y. Arakaki

Electrical Engineering

This paper presents an analysis of the reflectivity performance of the anechoic chamber. Measurements indicating the performance of the chamber-installed foam absorbers (described in a companion paper) are used to complete this analysis. This is followed by a comparison of the analysis results to chamber measurements taken in accordance with the free-space VSWR procedure [1]. Agreement between the analysis results and worst-case VSWR test measurements is within 1dB for a majority of reflection angles. In addition to chamber performance predictions, this paper describes a method of identifying primary reflection paths through interferometer calculations that compare all single bounce reflection path …

A Laboratory Course On Antenna Measurement, Samuel Parker, Dean Y. Arakaki

Electrical Engineering

This paper presents background information and experiment procedures for an antenna measurement laboratory course to be held in a new anechoic chamber at California Polytechnic State University. The lab consists of five experiments and one design project intended to give students practical experience with antenna measurement techniques and to creatively apply analytical skills to design, construct, and test antennas that meet given specifications. The experiments reinforce antenna principles including E-field polarization, antenna gain, radiation patterns, image theory, and frequency response.

In addition to the experiment procedures, this paper presents the design and characterization of Helical Beam (RHCP and LHCP) and …

Absorber Foam Characterization For Predicting Overall Anechoic Chamber Performance, Christopher R. Brito, Aloysius Aragon Lubiano, Newlyn Hui, Dean Y. Arakaki

Electrical Engineering

A new rectangular anechoic chamber (20’L x 10’W x 9’7”H) has been established at California Polytechnic State University (Cal Poly) through donations and financial support from industry and Cal Poly departments and programs. The chamber was designed and constructed by three graduate students as part of their thesis studies to explore and further their understanding of chamber design and antenna measurements. The chamber project has included RF absorber characterization, overall chamber performance assessment, and software development for the coordination of a positioner with a vector network analyzer.

This paper presents absorber characterization as a function of incidence angle and orientation …

Investigation Of Hydrocarbon Phytoremediation Potential Of Lupinus Chamissonis In Laboratory Microcosms, Wendy Martin, Yarrow M. Nelson, Kenneth Hoffman

Civil and Environmental Engineering

Controlled laboratory microcosms were used to research the phytoremediation potential of lupines (Lupinus chamissonis) for hydrocarbon-contaminated groundwater at a former oil field near Guadalupe, California. During oil production in the Guadalupe Oil Field, a kerosene-like hydrocarbon mixture was used as a diluent to improve the flow of the heavy crude oil. Leaking tanks and pipes resulted in diluent contamination in the soil and groundwater. Native plant species were planted at a pilot-scale field site to investigate the feasibility of using phytoremediation to remediate the groundwater contamination. In the field, biological and hydrological factors make it difficult to determine the specific …

Inspection And Deterioration Of Bridge Decks Constructed Using Stay-In-Place Metal Forms And Epoxy-Coated Reinforcement, Nabil Grace, James L. Hanson, Hany I. Abdelmessih

Civil and Environmental Engineering

A comprehensive research investigation was conducted to evaluate the use of Stay-in-Place Metal Forms (SIPMFs) in construction of concrete bridge decks. The objectives of this research project were to establish the state-of-the-practice for use and performance of SIPMFs for bridge decks, to evaluate the field performance of bridge decks with and without SIPMFs, and to investigate the behavior of environmentally conditioned large-scale laboratory bridge deck specimens with and without SIPMFs. A survey was developed and administered to all DOTs to examine the state-of-the-practice of using SIPMFs for concrete bridge deck construction. Additionally, a field investigation was conducted to evaluate the …

Work Flow Policy And Within-Worker And Between-Workers Variability In Performance, Kenneth Howard Doerr, Tali Freed, Terence R. Mitchell, Chester A. Schriesheim, Xiaohua Zhou

Industrial and Manufacturing Engineering

Work flow policies are shown to induce a change in average between-workers variability (worker heterogeneity) and within-worker variability in performance times. In a laboratory experiment, the authors measured the levels of worker heterogeneity and within-worker variability under an individual performance condition, a work sharing condition, and a fixed assignment condition. The work sharing policy increased the levels of worker heterogeneity and worker variability, whereas the fixed assignment policy decreased them. These effects, along with work flow policy main effects on mean performance times and variability are examined. This article represents an initial step in understanding effects that may be important …

Optical Filter Elements And Methods Of Making And Using Same, Michael A. Scobey, Lucien P. Ghislain, Dennis J. Derickson, Loren F. Stokes

Electrical Engineering

Optical filter elements and optical systems comprise optically mismatched etalons and optically mismatched stacked, optically coupled etalons that are directly optically coupled, at least one of the etalons or stacked, optically coupled etalons comprising first and second selectively transparent thin film mirror coatings on opposite surfaces of a bulk optic. The optically mismatched etalons can be configured to selectively pass single passbands. The disclosed optical systems optionally comprise other devices optically coupled to the optically mismatched etalons and optionally mismatched stacked, optically coupled etalons.

Preliminary Report On September 28, 2004 Parkfield Earthquake, Rakesh K. Goel, Charles Chadwell

Civil and Environmental Engineering

A strong earthquake of magnitude 6.0 (M_w) struck the Central Coast of California at 10:15:24 AM PST (17:15:24 UTC) on Tuesday, September 28, 2004. The epicenter (Figure 1) was 11 km (7 mile) SSE of Parkfield, at a depth of approximately 8 km (5 mile). The main shock was followed by a strong aftershock of magnitude 5.0 roughly four minutes later. As expected, numerous smaller aftershocks continue to strike to epicentral region. At the time of this report, no injuries have been reported and the damage is light, mostly limited to nonstructural damage. This preliminary report presents …

Varying The Time Delay Of An Action Potential Elicited With A Neural-Electronic Stimulator, Robert B. Szlavik, Frank Jenkins

Biomedical Engineering

There have been various theoretical and experimental studies presented in the literature that focus on interfacing neurons with discrete electronic devices such as transistors. It has also been demonstrated experimentally that neural-electronic devices can be used to elicit action potentials in a target neuron in close proximity to the neural-electronic stimulator. The time delay between stimulus and the onset of the neural action potential can be varied by varying the pulse amplitude and width generated by the neural-electronic stimulator (transistor).

Do Microcracks Decrease Or Increase Fatigue Resistance In Cortical Bone?, O. S. Sobelman, J. C. Gibeling, S. M. Stover, S. J. Hazelwood, O. C. Yeh, D. R. Shelton, R. B. Martin

Biomedical Engineering

Fatigue of cortical bone produces microcracks; it has been hypothesized that these cracks are analogous to those occurring in engineered composite materials and constitute a similar mechanism for fatigue resistance. However, the numbers of these linear microcracks increase substantially with age, suggesting that they contribute to increased fracture incidence among the elderly. To test these opposing hypotheses, we fatigued 20 beams of femoral cortical bone from elderly men and women in load-controlled four point bending having initial strain ranges of 3000 or 5000 microstrain. Loading was stopped at fracture or 106 cycles, whichever occurred first, and microcrack density and length …

Structural Graph Matching With Polynomial Bounds On Memory And On Worst-Case Effort, Fred W. Depiero

Electrical Engineering

A new method of structural graph matching is introduced and compared against an existing method and against the maximum common subgraph. The method is approximate with polynomial bounds on both memory and on the worst-case compute effort. Methods work on arbitrary types of graphs and tests with strongly regular graphs are included. No node or edge colors are needed in the methods; the common subgraph is extracted based in structural comparisons only. Monte Carlo trials are benchmarked with 100% additional (clutter) nodes. Results are shown to be typically within 1-2 nodes of the maximum common subgraph. Over 7500 test trials …

Electromagnetic Crosstalk Penalty In Serial Fiber Optic Modules, Xiaomin Jin, Keith D. Lystad, Musoke H. Sendaula

Electrical Engineering

Electromagnetic crosstalk poses a serious problem within today S advanced serial communication modules. A major detrimental effect is the degradation of receiver sensitivity in the presence of crosstalk noise. The mitigation of crosstalk penalty becomes increasingly more challenging as data rates increase for higher throughput and as module sizes shrink for increased port density. This paper is a study of the primary sources of crosstalk penalty in a 2.5 GB/s serial fiber optic transceiver and a 10Gb/s serial fiber optic transponder. A novel method for quantifying crosstalk penalty by observing a receiver’s bit-error-ratio (BER) versus transmitter to receiver signal phase …

Design Of Zebra Mussel Control Measures For Hydro-Electric Power Projects, G. Inci, C. J. Miller, N. Yesiller

Civil and Environmental Engineering

Zebra mussel, Dreissena polymorpha, is a biofouling organism that lives generally in freshwater ecosystems. Zebra mussel infestation has occurred at various freshwater structures and systems including raw water intakes, industrial and domestic distribution pipelines, and hydropower facilities at its native regions as well as distant locations. A study was conducted to perform risk assessment and to develop preventive measures for zebra mussel infestation at a planned hydroelectric power plant (Alpaslan II HEPP) in southeast Turkey. Zebra mussel is native to Anatolia region and existing hydropower facilities have significantly been affected by mussel infestation. The risk assessment was conducted by …

Modeling And Simulation Research And Instruction At The U.S. Air Force Academy, Russell M. Cummings, Scott A. Morton, Keith Bergeron

Aerospace Engineering

Modeling and simulation has become a driving force within the engineering and science communities as the cost of, and time for, experimentation continues to rise. Some areas of study, such as chemistry and biology, may not even have the ability to fully evaluate certain processes experimentally, making modeling and simulation even more important. The situation has led many areas of research to the necessity of modeling and simulating various processes using computers. In addition, the rise in computational capabilities (the supercomputers of a decade ago are outmoded by the PC clusters of today), has led to a paradigm shift from …

Geotechnical Reconnaissance Of The 2002 Denali Fault, Alaska, Earthquake, Robert E. Kayen, Eric Thompson, Diane Minasian, Robb E.S. Moss, Brian D. Collins, Nicholas Sitar, Douglas Dreger, Gary Carver

Civil and Environmental Engineering

The 2002 M7.9 Denali fault earthquake resulted in 340 km of ruptures along three separate faults, causing widespread liquefaction in the fluvial deposits of the alpine valleys of the Alaska Range and eastern lowlands of the Tanana River. Areas affected by liquefaction are largely confined to Holocene alluvial deposits, man-made embankments, and backfills. Liquefaction damage, sparse surrounding the fault rupture in the western region, was abundant and severe on the eastern rivers: the Robertson, Slana, Tok, Chisana, Nabesna and Tanana Rivers. Synthetic seismograms from a kinematic source model suggest that the eastern region of the rupture zone had elevated strong-motion …

Evaluation Of A Modified Mpa Procedure Assuming Higher Modes As Elastic To Estimate Seismic Demands, Anil K. Chopra, Rakesh K. Goel, Chatpan Chintanapakdee

Civil and Environmental Engineering

The modal pushover analysis (MPA) procedure, which includes the contributions of all significant modes of vibration, estimates seismic demands much more accurately than current pushover procedures used in structural engineering practice. Outlined in this paper is a modified MPA (MMPA) procedure wherein the response contributions of higher vibration modes are computed by assuming the building to be linearly elastic, thus reducing the computational effort. After outlining such a modified procedure, its accuracy is evaluated for a variety of frame buildings and ground motion ensembles. Although it is not necessarily more accurate than the MPA procedure, the MMPA procedure is an …

Wire Bonding Challenges In Optoelectronics Packaging, Jianbiao Pan, Patrice Fraud

Industrial and Manufacturing Engineering

Wire bonding has been used in integrated circuit (IC) packaging for many years. However, there are many challenges in wire bonding for optoelectronics packaging. These challenges include bonding on sensitive devices, bonding over cavity, bonding over cantilevel leads and bonding temperature limitations. The optoelectronics package design brings another challenge, which requires wire bonding to have deep access capability. In this paper, the wire bonding technologies are reviewed and ball bonding and wedge bonding are compared. The variables that affect the wire bonding process are then discussed. Finally, the challenges of wire bonding in optoelectronics packaging are presented in detail.

An Intelligent Parameter Varying (Ipv) Approach For Non-Linear System Identification Of Base Excited Structures, Soheil Saadat, Gregory D. Buckner, Tadatoshi Furukawa, Mohammad N. Noori

Office of the Dean (CENG) Scholarship

Health monitoring and damage detection strategies for base-excited structures typically rely on accurate models of the system dynamics. Restoring forces in these structures can exhibit highly non-linear characteristics, thus accurate non-linear system identification is critical. Parametric system identification approaches are commonly used, but require a priori knowledge of restoring force characteristics. Non-parametric approaches do not require this a priori information, but they typically lack direct associations between the model and the system dynamics, providing limited utility for health monitoring and damage detection. In this paper a novel system identification approach, the intelligent parameter varying (IPV) method, is used to identify …

Effect Of Chromium-Gold And Titanium-Titanium Nitride-Platinum-Gold Metallization On Wire/Ribbon Bondability, Jianbiao Pan, Robert M. Pafchek, Frank F. Judd, Jason Baxter

Industrial and Manufacturing Engineering

Gold metallization on wafer substrates for wire/ribbon bond applications require good bond strength to the substrate without weakening the wire/ribbon. This paper compares the ribbon bondability of Cr/Au and Ti/TiN/Pt/Au metallization systems. Both chromium and titanium are used to promote adhesion between substrates and sputtered gold films. Both can diffuse the gold surface after annealing and degrade the wire/ribbon bondability. Restoring bondability by ceric ammonium nitrate (CAN) etch was investigated. Experiments were conducted to investigate the effect of Cr/Au and Ti/TiN/Pt/Au, annealing, and CAN etch processes on 25.4 times; 254 μm (1 × 10 mil) ribbon bonding. All bonds were …

A Modal Pushover Analysis Procedure To Estimate Seismic Demands For Unsymmetric-Plan Buildings, Anil K. Chopra, Rakesh K. Goel

Civil and Environmental Engineering

An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429.

Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at …

Predicting Traffic Crashes Using Real-Time Traffic Speed Patterns, Mohamed Abdel-Aty, Anurag Pande

Civil and Environmental Engineering

Despite of the recent advances in traffic surveillance technology and ever-growing concern over traffic safety, there have been very few research efforts establishing Jinks between the real-time traffic flow parameters and crash occurrence. This study aims at the identification of the patterns in the freeway loop detector data, which potentially precede traffic crashes. This would have impOltant implications for Advanced Traffic Management Centers (ATMC). ATMCs could then be able to predict the potential for crashes on freeways and take action to reduce this hazard by warning drivers or introducing variable speed limits. Solution approach to this research problem essentially involves …

A Theoretical Analysis Of Long-Term Bisphosphonate Effects On Trabecular Bone Volume And Microdamage, Jeffry S. Nyman, Oscar C. Yeh, Scott J. Hazelwood, R. Bruce Martin

Biomedical Engineering

Bisphosphonates increase bone mass and reduce fracture risk, but their anti-resorptive action may lead to increases in fatigue microdamage. To investigate how bisphosphonate effects influence changes in bone volume and microdamage in the long term, a strain-adaptive model of bone remodeling and microdamage balance was developed for a continuum-level volume of postmenopausal trabecular bone by invoking Frost's mechanostat hypothesis. Both disuse and fatigue microdamage were assumed to stimulate the activation frequency of basic multicellular units (BMUs) such that bone remodeling served to remove excess bone mass and microdamage. Bisphosphonate effects were simulated as follows: low, intermediate, high, or complete suppression …

Laser Scanning Thermal Probe: A Novel Approach To Non-Destructive Evaluation, Jacob Kephart, John Chen, Hong Zhang

Mechanical Engineering

Structuraldefects such as cracks have recently been identifiable through anew nondestructive evaluation (NDE) technique know as sonic IR orthermosonics. However, these defects are depicted through thermal imagining systemas localized "hot spots" indicating a general location of adefect without an accurate portrayal of the dimensions or shapeof the defect. This paper demonstrates a new technique calledLaser Scanning Thermal Probe, LSTP, which utilizes thermography with theuse of heat application in strategic locations to observe spatialheat flow patterns. The LSTP records heat propagation across adefect area previously identified through the thermosonic technique. Thermal gradientswill occur as heat traverses the crack and provide informationto …