Engineering Commons^™

Using Player Profiling To Enhance Dynamic Difficulty Adjustment In Video Games, Aaron Burke

Computer Engineering

Video games have certainly come a long way since the days of pong. From humble beginnings of the first arcade machines they have bloomed into a multi-billion dollar industry and a global force to be reckoned with. Just like with movies there are enough genres out there to fit any demographic of gamer, and that’s not even just the game’s content but also the gameplay.

Unlike other types of media though, games are meant to be interacted with and played, which brings up new issues with accessibility and keeping things interesting for different levels of skill. Dynamic game difficulty adjustment …

Strider: Manufacturing Processes, Michael Warren-Angelucci

Industrial and Manufacturing Engineering

The goal of the Strider Project is to create a mobility device that can support a person with weakened leg strength and enable them to be supported and maintain a standing position. A prototype of the Strider was created by three Mechanical Engineering students as their senior project. The topic of this senior project was to analyze and create a manufacturing process for the manufacture of the Strider that will be ergonomic and cost effective.

There were many things that needed to be accomplished in order to create the manufacturing process. The first step was to verify that the prototype …

Pervious Pavement Infiltrometer, Madeline Musgrove

BioResource and Agricultural Engineering

This project tests infiltration rates on three different slabs of pervious pavement. A methodology was put in place to ensure that all three slabs were tested the same way. The test that is used for the infiltration rates is a constant head test. A steel ring is placed on the surface of the pervious pavement and sealed with Plumbers Putty around the bottom of the ring. A mark is then sketched on the inside of the ring at 2 inches above the surface of the pavement for a constant backpressure that is equal in all scenarios. Five gallons of water …

Design, Fabrication And Manufacturing Analysis Of A Rollover Protection System, Nikolas Paris

BioResource and Agricultural Engineering

This senior project discusses the design, fabrication and manufacturing analysis of a rollover protection system specifically designed for early body style Ford Broncos (1966-1977). The rollover protection system, or roll cage, is an integral safety feature on vehicles which commonly encounter extreme terrain conditions. Many vehicles which attempt to traverse terrain such as this are not always properly equipped with a rollover protection system. This is the case with the early body style Ford Bronco. This system will be designed to market the niche of early bronco parts.

The Quickiecomposer Android Application, Brigit Elizabeth Hawley

Liberal Arts and Engineering Studies

The QuickieComposer application is a program intended for use on Android Devices. Designed for the composer on the go, the QuickieComposer app is perfect for those “in the moment” compositions. In the following document, the functionality and development of the first version of the QuickieComposer application is explained.

Solar Energy Collection Analysis Tool For Conceptual Aircraft Design, Grant Glazebrook

Aerospace Engineering

As battery energy storage and solar cell technology improve, solar aircraft are increasingly being considered for High Altitude Long Endurance missions. Although solar vehicles may theoretically remain on-station indefinitely using the sun as a power source, their design and feasibility is sensitive to mission planning details as specific as the time history of the vehicle’s deck orientation relative to the sun; the energy available for capture by the on-board solar array is governed by the solar incidence angle, and at certain orientations, the vehicle may cast shadows on itself and further reduce its energy capture capabilities. To quantify these losses, …

The Architecture Selection, Design, And Discharge Modeling Of A Passive Compensation, Iron-Core, Two-Phase, Permanent Magnet Compulsator To Power A Small Railgun Platform, Collin Macgregor

Aerospace Engineering

The goal of this project was to design and build a compensated pulsed alternator, or compulsator, to power the Cal Poly Electromagnetic Railgun Mark 1.1. This project examines the feasibility of implementing mechanical pulsed power supplies for repeatable use with a railgun load for orbital debris hypervelocity testing. The final system architecture chosen was a passively compensated, iron-core, 2-phase, permanent magnet compulsator. The Cal Poly Compulsator will be capable of storing 45 kJ of mechanical energy with a peak operating speed of 5,000 rpm at 190 V. Theoretical calculations resulted in the following predicted electrical performance values: a peak output …

Quantum Dot Deposition Into Pdms And Application Onto A Solar Cell, Christopher Marcus Botros, Richard N. Savage

Master's Theses

Research to increase the efficiency of conventional solar cells is constantly underway. The goal of this work is to increase the efficiency of conventional solar cells by incorporating quantum dot (QD) nanoparticles in the absorption mechanism. The strategy is to have the QDs absorb UV and fluoresce photons in the visible region that are more readily absorbed by the cells. The outcome is that the cells have more visible photons to absorb and have increased power output. The QDs, having a CdSe core and a ZnS shell, were applied to the solar cells as follows. First, the QDs were synthesized …

Investigation Of Out-Of-Plane Properties Of Interlocking Compressed Earth Block Walls, Nicholas Anthony Herskedal

Master's Theses

Interlocking compressed earth blocks (ICEBs) are cement stabilized soil blocks that allow for dry stacked construction. The incomplete understanding of the inelastic performance of ICEB building systems limits widespread acceptance of this structural system in earthquake prone areas. This thesis presents results from an experimental program designed to explore the behavior of ICEB walls, built according to current design practice in Indonesia and Thailand, and subjected to out-of-plane loading. A total of five reinforced and grouted ICEB walls were constructed and tested.

Results from experimentation show the current masonry design code, ACI 530, adequately predicts the yield strength of these …

Application Of Wireless Power For Charging The Battery Of A Wireless Mouse, Jacob Keast, Vincent Jison

Electrical Engineering

Electronic devices are a part of all modern homes, but restricted by available outlets and the hassle of wires. With the modern wireless mouse, this is also the case. When the battery is low the consumer has several options: it is replaced with a new battery, it can be recharged using a USB wire, or the mouse is placed on a charging dock. This project provides an alternative to these options and allows the mouse’s battery to be charged via wireless inductive coupling. The wireless power charging system that was implemented in this project was successful in its ability to …

Energy Harvesting Of Human Kinetic Movement, David Marusiak, Julia Carrillo

Electrical Engineering

Development of kinetic energy scavenging applications from the human body necessitates additional research to assist in designating a mounting position for a potential device. A data acquisition system adequately provides a parametric average power comparison among four locations on the body (waist, upper arm, hand, and calf) for both a male and female subject. Experimentally, the hand-held device provided the highest average power. Thus, subsequent investigation at set speeds provides further analysis of the output’s characteristically linear behavior. The physical energy-harvesting device features a plastic tube casing wrapped with the stationary coiled wire through which a neodymium magnet oscillates. While …

Single-Phase High Efficiency Motor Testing, Marc Henry Perez

Electrical Engineering

A three-phase induction motor has higher efficiency than the single-phase motor counterpart. It is possible to run a three-phase motor with a single-phase source to develop a single-phase high efficiency system. The single-phase high efficiency motor, or SHE-motor, uses capacitor banks to operate at a balanced three phase induction motor using a single phase source. Unfortunately, this design has been limited, as it can only be balanced for one load configuration at a time. This provides the system to have maximum system performance. Due to this limitation in operations, it has proven to be non-ideal in commercial applications. It is …

Active Diesel Soot Measurement By Laser Opacity, Jonathan Audish, Brian Ko, Edward Ma, Travis Mcdaniel

Electrical Engineering

This project looks into understanding the concentration of soot being omitted by a diesel engine through the creation of an innovative opacity sensor. The system contains a receiver circuit implementing a photodiode, laser with wavelength of 405±10nm, and a microcontroller with analog-to-digital (A/D) converter. As the laser pulsates, the microcontroller collects and processes the data to calculate the amount of soot within the exhaust system. The opacity sensor in our tests will be used on an Isuzu 1.9 liter diesel engine. The elegant design of the system can be integrated into conventional manufacturing molding or casting processes for new exhaust …

Radio Link Analysis And Characterization Of Past And Future Cal Poly Cubesats, Brian Gilbert Tubb

Electrical Engineering

Cal Poly's satellites design team, PolySat, has three satellites in Low Earth Orbit (LEO) and four more planned to launch within the next two years. Radio communication of past and current orbiting satellites has been an exercise in frustration, prompting significant research into the satellite-side of the radio link by several other Senior Projects and Thesis papers. However, minimal effort has been spent on evaluating why these problems were discovered only once the satellites reached orbit. This paper details the downfalls of relying heavily on link budgets and improper long range test setups, then experimentally determines the sensitivity of PolySat's …

Residential Grid-Tied With Battery Backup Photovoltaic System, Thomas Stobuagh

Electrical Engineering

When power outages occur, many homes are left without power for some time as they are dependent on the power grid. This project aims to design a residential grid tied battery backup photovoltaic system that will provide up to 7.2kW in an area that gets 5.36-5.49 kWh/m2/day [1] to support a home with an average daily usage of 28.4 kWh/day. To effectively use this system the house remains connected to the electric utility at all times, so any power needed above what the solar system can produce is simply drawn from the utility. It includes battery backup or uninterruptible power …

Performance Of A Wastewater Treatment Pond System With Microfiltration, Eric Todd Martin

Master's Theses

ABSTRACT

PERFORMANCE OF A WASTEWATER TREATMENT POND SYSTEM WITH

MICROFILTRATION

Eric Martin

The Woodlands Wastewater Treatment Plant (WWWTP) treats wastewater from the Woodlands housing community near Nipomo, California. The treated effluent is recycled for irrigation of a golf course within the community. The treatment facility consists of three facultative ponds in series followed by a microfiltration system and chlorine disinfection. Microfiltration of wastewater pond effluent is a fairly new, and potentially challenging, application of microfiltration. This thesis describes the operating conditions and behavior of the WWWTP pond system followed by a microfiltration system for the purpose of producing recyclable water …

Confined Mixing Of Multiple Transverse Jets, Allen J. Bishop

Master's Theses

The mixing performance of multiple transverse jets has been evaluated experimentally. Measurement techniques included laser Doppler velocimetry and planar laser induced fluorescence. Basic findings are consistent with results presented in literature for single jet mixing behavior. Mixing performance has been compared to literature for the single jet case and the Holdeman parameter has been re-evaluated for effectiveness at low jet numbers. A single jet in a confined crossflow was found to have a local minimum at B(d⁄D) = 0.721. Results for two jets indicate monotonically decreasing unmixedness for the range of conditions tested, with no local optimum apparent. Data for …

Distributed Forcing On A 3d Bluff Body With A Blunt Base, An Experimental Active Drag Control Approach, Ethan Bruce Erlhoff

Master's Theses

This paper seeks to explore the effects of an active drag control method known as distributed forcing on a 3D bluff body with a blunt base. The 9.5 x 15.25 x 3 inch aluminum model constructed for this experiment has an elliptically shaped nose and rectangular aft section. The model is fitted with four, 12 Volt fans, forcing the freestream air into and out of 1 mm thick slots on the upper and lower trailing edges. The forcing is steady in time, held at a constant forcing velocity though all Reynolds numbers, but varies roughly sinusoidally in the spanwise direction …

Low Cost Neurochairs, Frankie Pike

Master's Theses

Electroencephalography (EEG) was formerly confined to clinical and research settings with the necessary hardware costing thousands of dollars. In the last five years a number of companies have produced simple electroencephalograms, priced below $300 and available direct to consumers. These have stirred the imaginations of enthusiasts and brought the prospects of "thought-controlled" devices ever closer to reality. While these new devices were largely targeted at video games and toys, active research on enabling people suffering from debilitating diseases to control wheelchairs was being pursued. A number of neurochairs have come to fruition offering a truly hands-free mobility solution, but whether …

Radio Direction Finding Network Receiver Design For Low-Cost Public Service Applications, Marcel Colman Eric Stieber

Master's Theses

A low-cost radio direction finding (RDF) VHF receiver has been investigated for development into a radio direction finding network (RDFN) with a particular focus towards public service and commercial asset tracking applications. The primary design criteria were reproducibility, low-cost, and simplicity such that public service and volunteer organizations can benefit from the technology. Two receiver designs were built and tested to allow for comparison of practicality, cost, and accuracy. A pseudo-Doppler RDF and a time difference of arrival (TDOA) receiver were built as proof-of-concept for a system design based on commercial off-the-shelf (COTS) components. The pseudo-Doppler system is a less …

Pullout Strength Of Epoxy Anchors Installed Underwater, Jeffrey Lee Blanchette

Master's Theses

This work presents the development of a test program and the results from the final round of testing to better understand the effect a submerged anchor installation has on the pullout strength of epoxy anchors. Two different epoxies were tested at embedment depths of two, four, and six bar diameters. These tests utilized three distinct installation procedures under dry and submerged conditions. The testing program occurred over five phases, with the final round used in analysis consisting of 24 anchor pullout tests. These tests showed that the presence of water did not have an effect on the epoxy bond when …

Laboratory Investigation Of The Effects Of Temperature And Moisture On Interface Shear Strength Of Textured Geomembrane And Geosynthetic Clay Liner, Taki Stavros Chrysovergis

Master's Theses

A laboratory investigation was conducted to determine the effects of temperature and moisture on the shear strength of textured geomembrane (T-GM) and geosynthetic clay liner (GCL) interface. Several landfill slope failures involving geosynthetics have occurred within the past three decades. Interface shear strength of T-GM/GCL is well documented for testing conducted at laboratory temperatures and at moisture contents associated with GCLs in submerged conditions. However, in-service conditions for landfill liner systems include a wide range of temperatures (extending from below 0 °C to above 40 °C) and a wide range of moisture conditions. Large-scale interface direct shear tests were performed …

Development Of Simulation Platform For Oropharyngeal Airway Placement And Design Evaluation Of The Bardo Airway, Lewis On Hang Lee

Master's Theses

Off-label use of traditional Oropharyngeal Airway (OPA) as a bite-block, and the subsequential procedure of force exertion of the device by physician has caused many cases of patient’s teeth damage and monetary loss, as the patient’s incisors were damaged while clenching on the OPA during an adverse scenario called “Emergency Clenching”. To remedy this harmful situation, Bardo OPA was developed by Dr. Theodore Burdumy. The Bardo airway has unique design to transfer the clenching force from incisor to the molar. However, the Bardo OPA is one-sized, and cannot fit most of the patients like the commonly-used OPAs, such as the …

Calibration And Characterization Of Cubesat Magnetic Sensors Using A Helmholtz Cage, Justin Dean Foley

Master's Theses

Small satellites, and CubeSats in particular, have quickly become a hot topic in the aerospace industry. Attitude determination is currently one of the most intense areas of development for these miniaturized systems and future Cal Poly satellite missions will depend heavily on magnetometers. In order to utilize magnetometers as a viable source of attitude knowledge, precise calibration is required to ensure the greatest accuracy achievable. This paper outlines a procedure for calibrating and testing magnetometers on the next generation of Cal Poly CubeSates, utilizing a Helmholtz cage to simulate any desired orbital magnetic field that would be experienced by a …

Bioflocculation Of Wastewater Treatment Pond Suspended Solids, Louis Lefebvre

Master's Theses

Bioflocculation of Wastewater Treatment Pond Suspended Solids

Louis Lefebvre

Wastewater treatment lagoons and high rate algae ponds (HRAPs) can provide cost effective wastewater treatment, but they commonly have high effluent concentrations of total suspended solids (TSS). In this thesis algae pond effluent was treated in a beaker testing apparatus (mixed and aerated) with various mixtures of activated sludge and primary effluent simulating differing activated sludge aeration basin compositions then was allowed to settle to assess settleability. Conventionally, microalgal suspended solids are removed by chemical coagulation followed by separation methods that often have a high cost relative to the low cost …

The Application Of Systems Engineering Principles To Model Lithium Ion Battery Voltage, George Gibbs

Master's Theses

The objective of this project is to present a Lithium Ion battery voltage model derived using systems engineering principles. This paper will describe the details of the model and the implementation of the model in practical use in a power system. Additionally, the model code is described and results of the model output are compared to battery cell test data. Finally, recommendations for increased model fidelity and capability are summarized.

The modeling theory has been previously documented in the literature but detailed implementation and application of the modeling theory is shown. The detailed battery cell test voltage profiles are proprietary; …

Implementation And Validation Of Fault-Rupture Response Spectrum Analysis Procedure In Csibridge For Bridges Crossing Earthquake Fault Ruptures, Jennifer Evelyn Tures

Master's Theses

This thesis evaluates the application of a simplified analysis procedure as implemented in version 16 of CSiBridge^TM for design of bridges crossing earthquake fault ruptures. The fault-rupture response spectrum analysis (FR-RSA) approximation method has been proved adequate for both straight and curved ordinary bridges, but lacked a comfortable interface to accommodate the method users. Computers and Structure, Inc. has implemented the FR-RSA procedure into CSiBridge^TM, a user-friendly integrated 3-D bridge design software, as an added seismic design feature. By combining the response of the bridge due to the quasi-static displacement from the fault strike-slip rupture and the …

Design And Simulation Of Passive Thermal Management System For Lithium-Ion Battery Packs On An Unmanned Ground Vehicle, Kevin Kenneth Parsons

Master's Theses

The transient thermal response of a 15-cell, 48 volt, lithium-ion battery pack for an unmanned ground vehicle was simulated with ANSYS Fluent. Heat generation rates and specific heat capacity of a single cell were experimentally measured and used as input to the thermal model. A heat generation load was applied to each battery and natural convection film boundary conditions were applied to the exterior of the enclosure. The buoyancy-driven natural convection inside the enclosure was modeled along with the radiation heat transfer between internal components. The maximum temperature of the batteries reached 65.6 °C after 630 seconds of usage …

Handitrike - Recumbent Tricycle, Sean Higginson, Kevin Howie, Vinay Patel

Mechanical Engineering

This report covers the design and construction of the recumbent racing tricycle for Mr. Robert T. Kelly, a disabled veteran. Unfortunately Rob’s right leg is five inches shorter than his left one and therefore is unable to properly operate standard cranks. Our team HandiTrike is composed of Sean Higginson, Kevin Howie, and Vinay Patel and our project requires us to come up with a design that is feasible to complete within the given three quarters, as well as allow Rob to gain full use of his tricycle. Currently Rob ‘s trike uses the standard crank set up found on most …

A.C.E. Lift: Assisted Cab Entry Lift System For Heavy Equipment Vehicles, Michael Berry, Eric Imazumi

Mechanical Engineering

The A.C.E. is a lift system to allow users with above-knee prosthetics to access the cab of heavy machinery. It is being designed as a senior project for California Polytechnic State University’s mechanical engineering curriculum with support from Quality of Life Plus (QL+) and sponsored by Jon Monett. In accordance with QL+’s mission of helping wounded veterans integrate into the workforce, the A.C.E. lift will allow disabled individuals to obtain jobs in the construction, agriculture, and waste management industries.

As a continuation of a previous senior project that focused on a Caterpillar excavator, the new design will be applicable to …