Engineering Commons^™

Ernie Ball Guitars Woodshop Facilities Redesign, Cameron Lea Schlemer

Industrial and Manufacturing Engineering

This report details a facilities design for Ernie Ball’s guitar and bass guitar manufacturing facility in San Luis Obispo, CA. Specifically, this project will redesign the layout for the Woodshop, the largest of the 5 manufacturing cells in the facility. This project was completed using the Systematic Layout Planning procedure and focused mostly on phase II and III in which the specifics for a layout are determined, however, space requirements were not evaluated as it was not within scope.

The first step was to develop departments in the facilities; two master departments were identified for the neck manufacturing process and …

Determining A Reliability Factor For Photovoltaic's In San Luis Obispo, Ryan S. Roach

Industrial and Manufacturing Engineering

This project will analyze raw photovoltaic (PV) solar panel performance data in order to determine a reliability factor for solar panels in San Luis Obispo. This project is a subset of a larger project being performed by SLO RESCO, which is funded by a grant from the California Energy Commission. Their project will explore the use of solar, wind, geothermal, and biomass renewable resources. The scope of this project is limited to a small section of RESCO's analysis of solar panel technology and implementation in which a reliability factor will be generated.

The objective is to determine a reliability factor …

Layout And Procedure Re-Design Of Dcpp Receiving Warehouse, Nicole Elizabeth Riegel

Industrial and Manufacturing Engineering

The receiving warehouse at Diablo Canyon Power Plant, owned by Pacific Gas and Electric, serves as a place to recognize the receiving of items into an ERP system, repackage and label items for long-term storage, and organize items for delivery inside the secured area. The warehouse managers would like to redesign the layout and procedures of the warehouse. Currently items are not received, scanned, or shipped in a timely manner. The flow of people and items in the receiving and shipping area is chaotic and space is limited especially during plant outages. The objective of this project is to: • …

Implementing Rfid To Improve Animal Shelter Inventory And Allocation, Adam Mach

Industrial and Manufacturing Engineering

The purpose of this project is to observe the best way to incorporate Radio Frequency Identification (RFID) technology into the animal inventory system present in animal shelters, while also observing the benefits of implementing this system. The Woods Humane Society was used in this project as a sample animal care facility that could benefit from this application.

Many RFID systems can be observed in other industries, but very few examples this technology exist in animal shelters or smaller animal care facilities. Part of the reason for that is because funds are scarce at most animal care facilities, like the Woods …

Decision Analysis Tool For Appropriate Water Treatment Technologies In Improverished Villages, Conner David Johnston

Industrial and Manufacturing Engineering

No abstract provided.

Non-Profit Management System For Friends Of The Elephant Seal, Matthew Justus, Robert Macasi, Jeff Zinn

Industrial and Manufacturing Engineering

Friends of the Elephant Seal (FES) are a non-profit organization based in San Simeon, California. Their current method of tracking and reporting information is inefficient. A project was proposed to develop a new information management system for FES, install it at their office and provide training including a user manual. The project was divided into three parts: Database Design and Implementation; User Interface Design and Ergonomics; and User Manual & Help System.

The objective of the project was to design a user-friendly interface specifically for the FES worker that allowed for easy access to data entry functions, reporting functions and …

Design And Manufacture Of Tennis Ball Retriever, Philip Hurst

Industrial and Manufacturing Engineering

No abstract provided.

T.K. Ripper: A Multidisciplinary Group Project, Logan Hunt

Industrial and Manufacturing Engineering

The purpose of this project is to provide solutions to objectives that require an industrial engineering (IE) background for a multidisciplinary group senior project. The group is creating a portable winch pulley, dubbed the T.K. Ripper, which will be used for extreme water sports. The group is interested in creating a business using this product, and has forecasted demand for the next three years. The objectives that were assigned from the group were a flow process chart, the cost of producing the product themselves in their own facility, the cost of producing the product if outsourced to China, how many …

Funeral Services Marketing Interface To Enhance Customer Service And Overall Productivity, Alyssa R. Habing

Industrial and Manufacturing Engineering

Customer satisfaction is the ultimate goal of any business regardless of the industry it resides in; it’s the sole driver of a company’s productivity levels and overall success within the market. Although numb to most market fluctuations, the funeral industry needs to reinvent their business strategies continuously in order to increase their market share. It’s especially important for smaller funeral homes across the world to take this idea to another level in order to stay competitive with the larger, corporate establishments. In the past twenty years, the industry has grown exponentially due to more interest and popularity. The increase in …

5-S And The Facility Redesign For A Cleaning Products Manufacturing Company, Jonathan Eipper

Industrial and Manufacturing Engineering

This project deals with a “green” cleaning products company in Southern California. Business has increased 38% in the past year along with changes in production capacity and capability, so the company has identified a need for a sustainable model of manufacturing at their new and expanded facility. Goals of promoting sustainable waste management, minimizing types of lean waste, properly storing inventory, improving workplace communication, and defining production tasks will be addressed in this facilities redesign through 5S. The biggest component and outcome of the facility design will be organization. This leads to a goal of eliminating waste, which will in …

Design And Development Of An Integrated Waste Management System For Huai Nam Khun, Thailand, Annie Duong

Industrial and Manufacturing Engineering

Background

A rural village in Thailand has always been limited in access to waste collection services and processing facilities. As a result, their behaviors of disposing waste in ineffective manners such as dumping and burning causes a variety of environmental impacts. In addition, the people dwelling in these areas are often unaware of the health risks associated to these types of engagements because of the inadequate education system. For a long time coming these circumstances remained untouched until a non-profit organization recently shed light to the need for a solution. An investigation, to develop a design solution in order to …

Design Of A Low Cost Powered R/C Combat Airplane And Manufacturing Plan, Jonathan N. Bailey

Industrial and Manufacturing Engineering

The goals of this project are to design a low cost powered remote control combat airplane capable of outdoor flight, named the Aero EX and to develop a manufacturing plan to produce each unit at a selling price of $200, while operating at a 25 vehicle batch rate inside a 1,000 square foot facility. These goals are achieved using: Aerospace fundamentals to design the vehicle, Design for Manufacturability to optimize the design for minimal use of labor, Design for Assembly to give consumers the ability to build the vehicle without fixtures, Pull production to eliminate scheduling and match customer demand. …

Mini Cooper Ram-Air Duct System, Christopher Dirkes, Kyle Vanden Berg

Industrial and Manufacturing Engineering

Due to extensive track use, Mini Cooper GP’s are notorious for having brake overheating problems. In the conceptual design stages of the car, BMW engineers intended to install brake ducts to prevent overheating, but due to time constraints, the cars were shipped without the ducts they were intended to have. The goal of this project was to design and manufacture a brake duct kit for the Mini Cooper GP. After a conceptual design of the system, make-buy decisions were made for each component. The components to be made were designed using computer-aided drafting, engineering, and manufacturing software. The components manufactured …

Small Business And Industrial Engineering Tools, Adib Behjat

Industrial and Manufacturing Engineering

UltraMed, a small distribution company located in the United Arab Emirates, faces high operations cost due to inefficiency in methods and concepts implemented in their business. Through the use of basic Industrial Engineering techniques, UltraMed and other small businesses can succeed in reducing their operational costs through the implementation of three major concepts of Industrial Engineering: Operations Research, Database Management, and Engineering Economic Modeling.

To succeed in implementing the design, it is important to have the right data and a cohesive foundation for the design; else, the results generated by the techniques will be invalid and could cause further complications …

The Optimal Warehouse Location For Cal Poly's Campus Dining, Robert Buie

Industrial and Manufacturing Engineering

The Cal Poly Corporation and Campus Dining face the challenge of meeting the growth of students and dining venues on campus with the limited space capacity of their warehouse in building 19. Given a $250,000 budget, Campus Dining has an option to keep the warehouse at the current location at building 19 or moving the warehouse to building 82 off Mt. Bishop Road. Each warehouse location has its benefits as building 19 is in the center of campus and building 82 has much more shelving space than building 19. The objective of this project was to select the better choice …

Digester Selection And Operation For Heybeli Island, Spencer Fackler, Joseph Violetti

Industrial and Manufacturing Engineering

The Heybeli Digester project originated with Sema Alptekin in her personal research and was incorporated into a Senior Project opportunity at California Polytechnic State University, San Luis Obispo. The aim of this project was to select and design a plan for the use of a digester for the island of Heybeli, Turkey. The objective of this plan was to incorporate economic, social, and environmental justifications to evaluate if a digester would be a benefit to the community.

Systems Engineering analysis is a vital tool when working with complicated projects that include multiple systems interfacing with one another. Through the use …

Energy Audit And Optimization For "Arches Etc.", James Ross Dixon

Industrial and Manufacturing Engineering

Arches etc. is a San Diego business, which specializes in the manufacture, distribution, and installation of custom designed doors, windows, mouldings, and hardware. Due to the recent economic downturn, which has hindered the construction industry, Arches etc. believed that an analysis and optimization of their energy usage would provide additional assistance towards their goal to lower overhead and maintain current operations.

To begin this task, a comprehensive energy audit was conducted to establish an initial state from which to base improvements. Arches etc.’s current monthly utility bill averages $996, which solidifies the accuracy of this project’s performed energy audit, estimating …

Recycling Made Easy: An Ergonomic Approach To Home Recycling And Trash Containers, Landon P. Boisclair

Industrial and Manufacturing Engineering

The purpose of this project is to create an ergonomically sound recycling/trash container, with the ultimate hope of making the recycling process easier and more intuitive, thereby increasing recycling rates. Currently, while there are many recycling/trash containers available for purchase, there is no product that has a design without glaring ergonomic flaws. An ergonomic design and product prototype was created as a part of this project, and was subsequently tested against a conventional prototype model. The data collected from the experiments conducted suggests that the new ergonomic model makes the waste disposal process and the container transportation process easier, while …

Application Of Radio Frequency Identification To An Asset Checkout System, Ma'ayan K. Bennaim

Industrial and Manufacturing Engineering

Radio Frequency Identification (RFID) is a growing technology which is increasingly utilized throughout industry. This senior project identifies an RFID alternative to the checkout system in the tool crib of the Cal Poly Aero Hanger. A new database is designed and built to interface with an RFIDeas AIR enroll reader. The system realizes vast time savings in check in times and increases student accountability for the tools which are checked out by tagging tools.

Nonprofit Management Through Effective Database Utilization, Jennifer Muscat

Industrial and Manufacturing Engineering

This project addresses problems found within a specific department within Lifewater International. Lifewater faces many unique challenges operating as a nonprofit. Like most nonprofits, elaborate costly solutions are simply not an option when solving department problems. This project addresses three interrelated problems within Lifewater’s Development and Communications Department. The three issues addressed are Volunteer Management, Donor Management, and Project Management. Each problem was examined to determine the areas for improvement that this project can handle and solve. Each problem was given an improved design. A Volunteer Management System was designed to increase volunteer utilization and appropriately match volunteers with appropriate …

Visual Representations Of Queried Database Results Using Google's Mapping Technologies, Steven Michael Kilbert

Industrial and Manufacturing Engineering

Database queries have been used in business applications throughout the world to filter out specific information which is often used as a basis for making a decision. Despite the broad use of queries, there are only a limited number of ways to represent results, the most common being a dynaset, or results table. This paper describes the investigation of methods to create more visual representations of results using maps to show queried geospatial data. From these methods, applications were successfully developed to create customized maps in Google Earth and Google Maps based on queried geographical data from Microsoft Access databases. …

Design For Manufacturing Of Sports Equipment, Cedrick Bit, Christopher L. Head

Industrial and Manufacturing Engineering

The purpose of this project was to validate industrial designs for a product in its conceptual stage and suggest/implement design changes that suit the contracting company’s needs while assuring the product maintains its basic functional requirements. Techniques and methods used to validate the design include 3‐D solid modeling, physical product application using rapid prototyping to produce the product. Methods of design for manufacturing were analyzed in the design. Processes used in the validation and verification of the design include solid modeling design, methods of measurements, fixture design and manufacturing processes. Full design specifications and solid model files were finalized and …

Impaired Vascular Reactivity Following Chronic Ischemia In The Arteries Of The Mouse Hindlimb, Thomas (Tom) Kesler

Biomedical Engineering

Collateral dependent hyperemia is reduced following chronic ischemia, but the contribution of individual vessel reactivity is unknown. Further, it is not known what aspect of the complex ischemic injury response impacts vascular reactivity. To determine the impact of ischemia on vascular reactivity, we measured functional vasodilation in the muscular branch artery following resection of the femoral artery proximal to the muscular branch. On day-14 after surgery the diameter of the muscular branch was measured using side-stream dark field (SDF) imaging intravital microscopy. At moderate intensity skeletal muscle contraction (1mA, 200µs, 8Hz, 90sec), functional vasodilation is reduced compared to the contralateral …

Intelligent Irrigation Zone Splitter, David Boeck

Electrical Engineering

The intelligent irrigation zone splitter allows easy expansion of an existing irrigation controller. To expand on an existing controller a new wire is needed to run between the controller and the valve. This path may be buried beneath driveways, patios, and sidewalks. The intelligent irrigation zone splitter uses an already existing wire path to control two valves and create a new watering zone. This controller uses timing and memory to split the total watering time of the zone.

Dual Axis Solar Tracker, Weston Sapia, Jason Birnie

Electrical Engineering

No abstract provided.

E.J. Gallo Winery Spirit-Makers Facility, Aaron Pickar

Industrial and Manufacturing Engineering

With growing demand for E.J. Gallo spirit brands, the cramped and cluttered facility allocated to the spirit-makers does not provide an adequate work environment to design and test new hard alcohols. E.J. Gallo Winery wants to relocate the spirit-makers to a new facility located near the brandy production floor for under 200,000 dollars. In order to do this, a revised systematic approach to facility design is used.

In this process, the departments are first defined, then the relationships between these departments and the space requirements are documented. Once these planning steps are complete, alternative layouts are constructed and analyzed until …

Environmental Savings Tracking System For Cisco Systems, Inc., Lauren J. Herrera

Industrial and Manufacturing Engineering

This paper illustrates the research, methodology and design used to create an environmental savings tracking system, also known as the Green Dashboard, for Cisco Systems Inc.’s Green Initiatives Group to quantify and capture an annualized summary of savings from projects initiated within its Customer Value Chain Management Organization. It articulately describes the

methodology behind the selection of metrics and the design of the process required to collect and track these quantitative direct savings. As well as describes the benefits associated with implementing this system, such as shifting Cisco towards more sustainable products and increased customer satisfaction and investor relations by …

The Design And Manufacture Of A Light Emitting Diode Package For General Lighting, Michael S. Krist

Master's Theses

Lighting technologies have evolved over the years to become higher quality, more efficient sources of light. LEDs are poised to become the market standard for general lighting because they are the most power efficient form of lighting and do not contain hazardous materials. Unfortunately, LEDs pose unique problems because advanced thermal management is required to remove the high heat fluxes generated by such relatively small devices. These problems have already been overcome with complex packaging and exotic materials, but high costs are preventing this technology from displacing current lighting technologies.

The purpose of this study is to develop a low-cost …