Engineering Commons^™

New Product Launch Decisions Under Competition And Uncertainty: A Real Options And Game-Theoretic Approach To New Product Development, James O. Ostler

Theses and Dissertations

New product development is central to many firms' future success. Not only as a means to continue to maintain their piece of the market, but product development can also be a strategic means for a company to diversify, and/or alter focus to adapt to changing market conditions.

Most of the research in new product development has been on how to do it cheaper and faster than the next guy. However, early commercialization does not guarantee a position of strength in the market. Failures of EMI in CT scanners and Xerox in personal computers illustrate that being first to market does …

Dynamic Stability And Handling Qualities Of Small Unmanned-Aerial-Vehicles Unmanned-Aerial-Vehicles, Tyler Michael Foster

Theses and Dissertations

General aircraft dynamic stability theory was used to predict the natural frequencies, damping ratios and time constants of the dynamic modes for three specific small UAVs with wingspans on the scale from 0.6 meters to 1.2 meters. Using USAF DatCom methods, a spreadsheet program for predicting the dynamic stability and handling qualities of small UAVs was created for use in the design stage of new small UAV concept development. This program was verified by inputting data for a Cessna-182, and by then comparing the program output with that of a similar program developed by DAR Corporation. Predictions with acceptable errors …

A Finite Element Simulation Of Temperature And Material Flow In Fricton Stir Welding, Mark J. Lasley

Theses and Dissertations

The purpose of this research was to use the Transvalor S.A. product, Forge3, to develop a finite element simulation of the friction stir welding process that improves the predictability of temperature evolution and material flow within the plunge portion of the process. Previous modeling created more heating within the billet than experimental results, probably due to the simplification of the simulation with adiabatic boundary conditions. More realistic tooling temperatures were included in this model as these affect heat evolution which is a determining factor in microcrystalline growth. These results were validated by experimental efforts using a billet and tooling instrumented …

Byu Micro-Sar: A Very Small, Low-Power Lfm-Cw Synthetic Aperture Radar, Michael Israel Duersch

Theses and Dissertations

Brigham Young University has developed a low-cost, light-weight, and low power consumption SAR for flight on a small unmanned aerial vehicle (UAV) at low altitudes. This micro-SAR, or uSAR, consumes only 18 watts of power, ideal for application on a small UAV. To meet these constraints, a linear frequency modulation-continuous wave (LFM-CW) transmit signal is utilized. Use of an LFM-CW signal introduces some differences from the typical strip map SAR processing model that must be addressed in signal processing algorithms. This thesis presents a derivation of the LFM-CW signal model and the associated image processing algorithms used for the uSAR …

A Method For Winding Advanced Composites Of Unconventional Shapes Using Continuous And Aligned Fibers, Abraham K. Allen

Theses and Dissertations

Advanced composites are extremely strong, rigid, and light, even when compared with advanced metals. Advanced composites are replacing high-tech metals as the material of choice for aerospace engineering. However, the processes used to manufacture advanced composites generally lose some of the properties of the materials by their process limitations.

One process that keeps the theoretically awesome qualities of the composite materials in tact is filament winding. Filament wound parts are used as rocket shells, bicycle frame tubes, drive shafts, pressure vessels, etc. Filament winding is an automated process and makes reliable parts to close tolerances. If a straight tube were …

Understanding And Improving Moment Method Scattering Solutions, Clayton Paul Davis

Theses and Dissertations

The accuracy of moment method solutions to electromagnetic scattering problems has been studied by many researchers. Error bounds for the moment method have been obtained in terms of Sobolev norms of the current solution. Motivated by the historical origins of Sobolev spaces as energy spaces, it is shown that the Sobolev norm used in these bounds is equivalent to the forward scattering amplitude, for the case of 2D scattering from a PEC circular cylinder. A slightly weaker relationship is obtained for 3D scattering from a PEC sphere. These results provide a physical meaning for abstract solution error bounds in terms …

Design Of Cmos Four-Quadrant Gilbert Cell Multiplier Circuits In Weak And Moderate Inversion, Craig Timothy Remund

Theses and Dissertations

This thesis presents four-quadrant CMOS current-mode multiplier architectures based on the bipolar Gilbert cell multiplier architecture. Multipliers are designed using the CMOS subthreshold region to take advantage of the subthreshold exponential I-V relationship that closely matches bipolar modeling. It is discovered that biasing to remove drift current components and to address higher order effects such as ideality factor mismatch, threshold mismatch, body effect, and short channel effects, is important to provide a linear multiplier. It is also shown that distortion caused by device size mismatch and offset input currents can be used to cancel the distortion introduced by drift currents …

Development Of Pole Impact Testing At Multiple Vehicle Side Locations As Applied To The Ford Taurus Structural Platform, Mark Halford Warner

Theses and Dissertations

A test method was developed whereby repeated pole impacts could be performed at multiple locations per test vehicle, allowing a comparison of energy and crush relationships. Testing was performed on vehicles moving laterally into a 12.75 inch diameter rigid pole barrier. Crush energy absorption characteristics at the different locations were analyzed, and the results compared to test data from broad moving barrier crashes and available crash tests with similar pole impacts. The research documents the crush stiffness characteristics for narrow impacts at various points on the side of the Taurus vehicle platform. Factors encountered during the research include the importance …

The Effectiveness Of Computer-Based Tutorials In Learning Computer-Aided Design Methods For Tool Design Procedures, Andrew Moroni Hall

Theses and Dissertations

Throughout the past twenty-five years the process of designing and manufacturing a product has been revolutionized by the integration of Computer Aided Design (CAD). Although three-dimensional solid modeling, or 3-D CAD offers a better representation of the product in a virtual environment, it can be complicated and difficult to learn. Tutorials have been developed to assist manufacturing tool design student in the learning of 3-D CAD principles as they apply to tool design. This study seeks to test the effectiveness of those tutorials. A BYU tool design class was divided into two groups according to their assigned laboratory time. The …

Polarimetric Temperature Sensor Using Core-Replaced Fiber, Benjamin L. Ipson

Theses and Dissertations

Optical fibers are increasingly being used to create sensing devices. The D-fiber has an elliptical core and exhibits birefringence. This birefringence can be used to create a polarimetric sensor. The elliptical core supports two orthogonal modes that have separate effective indices of refraction. The indices of refraction change with a change in temperature. Since the effective indices of refraction change differently for the two modes, the birefringence also changes. This change in birefringence can be seen as a change in detected power through the fiber through the use of polarizers. The fiber then becomes a temperature sensor. The sensitivity of …

Compliant Mechanisms To Perform Bearing And Spring Function In High Precision Applications, Jesse R. Cannon

Theses and Dissertations

An increasing number of mechanical systems are being designed on the micro and meso scales. Assembly and maintenance become increasingly difficult as the size of mechanisms decrease, and the minimum size of traditional elements such as bearings and springs is limited. The backlash of bearings also limits their usefulness in applications where high precision and repeatability are needed. At small scales and for high precision applications, alternative, non-traditional elements are needed.

The objective of this thesis is to develop reliable and scalable compliant components to replace bearings and helical springs. Components replacing springs must be able to produce specified torque/motion …

Improved Signal Integrity In Ieee 1149.1 Boundary Scan Designs, Efren De Jesus Rangel Taboada

Theses and Dissertations

This work is an analysis of solutions to problems derived from inherent timing and signal integrity issues in the use and application of the IEEE 1149.1 Standard at the board level in conjunction with its test system. Setup or hold times violations may occur in a boundary scan chain using IEEE 1149.1 compliant devices. A practical study of the TDI-TDO scan data path has been conducted to show where problems may arise in relationship to a particular board topology and test system. This work points to differences between passing and failing scan path tests for problem characterization. Serial data flow …

Thermally Developing Electro-Osmotic Convection In Circular Microchannels, Spencer L. Broderick

Theses and Dissertations

Thermally developing, electro-osmotically generated flow has been analyzed for a circular microtube under imposed constant wall temperature (CWT) and constant wall heat flux (CHF) boundary conditions. Established by a voltage potential gradient along the length of the microtube, the hydrodynamics of such a flow dictate either a slug flow velocity profile (under conditions of large tube radius-to-Debye length ratio, a/lambda_d) or a family of electro-osmotic flow (EOF) velocity profiles that depend on a/lambda_d. The imposed voltage gradient results in Joule heating in the fluid with an associated volumetric source of energy. For this scenario coupled with a slug flow velocity …

Quantifying The Effects Of Aging On The Mechanical Properties Of Medical Grade Polycarbonate And Uv Cured Adhesives, Christopher James Lewis

Theses and Dissertations

Advances in engineering polymer technology have created a generation of high strength-to-weight materials for medical applications, with virtually no adverse interactions with body fluids. Polycarbonate is a widely used engineering polymer, and is often used in connection with ultra-violet light (UV) cured adhesives. Because of the chemical complexity of polymers, little is known about their actual aging characteristics. By characterizing the effects of aging, storage environment, and sterilization on medical grade polycarbonate/adhesive system properties, more accurate failure predictions can be made. In this thesis, efforts to better understand the effects of accelerated aging on a medical grade polycarbonate and UV …

A Cad-Centric Approach To Cfd Analysis With Discrete Features, Matthew Lee King

Theses and Dissertations

During the conceptual design stage several concepts are generated, and a few are selected for detailed analyses. CAD models from conceptual design often follow the "over-the-wall" approach for downstream analyses such as FEA, CFD, heat transfer, and vibrations. A CAD-centric approach will be applied to the CAD-to-CFD process to help industry in an ongoing quest to shorten the design cycle time. The CAD-centric approach consists of using the CAD model as a source of data for downstream applications such as mesh generation, and CFD setup. The CAD model used in the CAD-centric approach contains the geometry to be analyzed and …

Development Of A Virtually Calibrated Projection Moire Interferometry Technique Capable Of Inaccessible Surface Measurements, Mark Lee Kimber

Theses and Dissertations

Optical-based techniques have found merit in measuring displacement and strain for decades. These techniques are commonly used in numerous applications ranging from large displacements in wind tunnel experiments to displacement measurements on the submicron scale. Projection Moiré Interferometry (PMI) is an out-of-plane displacement measurement technique, and consists of capturing reference and deformed images of a grid pattern projected on the test object. By differencing the reference and deformed images of the projected grid pattern, a fringe pattern is generated from which the displacement field can be extracted. This computation requires calibration procedures that analyze a number of fringe patterns from …

Variation Simulation Of Fixtured Assembly Processes For Compliant Structures Using Piecewise-Linear Analysis, Michael L. Stewart

Theses and Dissertations

While variation analysis methods for compliant assemblies are not new, little has been done to include the effects of multi-step, fixtured assembly processes. This thesis introduces a new method to statistically analyze compliant part assembly processes using fixtures. This method, consistent with the FASTA method developed at BYU, yields both a mean and a variant solution. The method, called Piecewise-Linear Elastic Analysis, or PLEA, is developed for predicting the residual stress, deformation and springback variation in compliant assemblies. A comprehensive, step-by-step analysis map is provided. PLEA is validated on a simple, laboratory assembly and a more complex, production assembly. Significant …

The Benefit Of Using Simulation To Improve The Implementation Of Lean Manufacturing Case Study: Quick Changeovers To Allow Level Loading Of The Assembly Line, Jack J. Mcclellan

Theses and Dissertations

In today's competitive manufacturing environment, companies are constantly looking for ways to improve. Because of this, many companies are striving to become "lean" by implementing lean manufacturing, which is a difficult process. To aid in the implementation of lean manufacturing, simulation was used to reduce the trial-and-error period of lean manufacturing and find to optimum approach to implement the lean manufacturing principle. In this research, a case study of implementing level loading of the production schedule for BullFrog International, L.C. will be examined. To make it possible to implement level loading, the thermo-former machine at the beginning of the operations …

A Review Of Setup Practices And Procedures For Creating Ieee 802.11 Wireless Community Networks, Jae M. Theobald

Theses and Dissertations

IEEE 802.11 wireless networking equipment has made it possible to bridge the last mile for new broadband internet service providers. Inexpensive wireless networking equipment and high gain antennas enable high speed internet delivery at a fraction of the cost of installing or upgrading land lines for cable or DSL services. Based on this research, a guide of general practices and procedures is proposed for designing, installing, and maintaining a reliable wireless community area network. Included tests have provided performance results for several types of wireless antennas (including wire grid parabolic dishes, Yagi and Vagi styles, and echo backfire), wireless bridges, …

Numerical Simulations In Electro-Osmotic Flow, Joseph S. Tenny

Theses and Dissertations

The developing flow field in a parallel plate microchannel, induced by wall motion, has been modeled numerically. This type of flow simulates the physical driving mechanism that exists in electro-osmotically generated flow with large channel diameter-to-Debye length ratios (Z). The physics of the flow field were compared between the moving wall model (MWM) and electro-osmotic flow (EOF) at Reynolds numbers of 1 and 1800, and Z > 2500. Also, Z-values between 50 and 500 were studied to investigate the accuracy of the MWM. Results show that for Z-values greater than 100 the MWM shows good agreement with EOF.

The dynamics of …

An Open Architecture For Versatile Machine And Actuator Control, Michael Scott Baxter

Theses and Dissertations

Automatic control technology increases usability, reliability and productivity in manufacturing, transportation, and climate control. There are many additional areas of modern life that could benefit through automatic control; however, current automation components are too expensive or aren't sufficiently flexible. For example, the cost of current commercial motion control components precludes their use in an average home. This thesis describes an automatic control methodology that is low cost and is flexible enough for a wide variety of control applications. Typical applications could include:

- Home lighting, security and appliances

- Commercial building heating, ventilation and air conditioning

- Industrial machine tool …

Frequency Estimation Of Linear Fm Scatterometer Pulses Received By The Seawinds Calibration Ground Station, Spencer S. Haycock

Theses and Dissertations

The SeaWinds Calibration Ground Station (CGS) is a passive ground station used to receive and sample transmissions from the SeaWinds scatterometer. During post processing, the received transmissions are characterized in order to verify proper instrument operation and to eliminate error in satellite telemetry and in data products generated from processing SeaWinds data. Sources of instrument error include uncertainties in transmitted power, pulse timing, and carrier frequency drift. Identifying these errors prevents their propagation to data products. A key aspect of this analysis involves accurately estimating the parameters of the SeaWinds transmissions. As better parameter estimates are researched and developed, the …

An Examination Into The Statistics Of The Singular Vectors For The Multi-User Mimo Wireless Channel, Scott Nathan Gunyan

Theses and Dissertations

Many capacity and near-capacity achieving methods in multiple-input-multipleoutput (MIMO) wireless channels make use of the singular value decomposition (SVD) of the channel matrix. For the multi-user case, the SVD of the channel matrix for each user may result in right and left singular vectors that are similar between users. This proposes another descriptive characterization of the multi-user MIMO channel. Closely aligned singular vectors between any two users could reduce the achievable signaling rates of signal processing communication methods as one user would be more difficult to resolve in space-time from another. An examination into how this alignment can be described …

Imaging Techniques And Hardware For Inhomogeneous Mri, David A. Thayer

Theses and Dissertations

Magnetic Resonance Imaging (MRI) has become one of the most important medical imaging modalities over the past few decades because of its flexibility and low risk, along with other useful attributes. For traditional MRI, the static magnetic field, B_0, must be highly homogeneous. Obtaining this homogeneity can be difficult. Traditional MRI also requires linear gradient fields that are directed along the static field direction. Under these conditions a Fourier transform relationship exists between sampled data and the image to be reconstructed. In the case of an inhomogeneous static field, gradient fields that are not linear, or gradients that are not …

Conformal Refinement Of All-Hexahedral Finite Element Meshes, Nathan Harris

Theses and Dissertations

Mesh adaptation techniques are used to modify complex finite element meshes to reduce analysis time and improve accuracy. Modification of all-hexahedral meshes has proven difficult to the unique connectivity constraints they exhibit. This thesis presents an automated tool for local, conformal refinement of all-hexahedral meshes based on the insertion of multi-directional twist planes into the spatial twist continuum. The contributions of this thesis are (1) the ability to conformally refine all entities of an all-hexahedral element mesh, (2) the simplification of template insertion to multi-directional refinement. The refinement algorithm is divided into single hex sheet operations, where individual refinement steps …

Microwave Remote Sensing Of The Greenland Ice Sheet: Models And Applications, Ivan S. Ashcraft

Theses and Dissertations

Spaceborne microwave sensors are powerful tools for monitoring the impacts of global climate change on the Greenland ice sheet. This dissertation focuses on refining methods for applying microwave data in Greenland studies by using new simple theoretical and empirical models to investigate (1) azimuth anisotropies in the data, (2) the microwave signature of the snow surface, (3) detection of snow melt, and (4) classification of snow melt. The results are applicable for identifying geophysical properties of the snow surface and monitoring changes on the ice sheet in relation to melt duration/extent, accumulation, and wind patterns. Azimuth dependence of the normalized …

A New Method For Melt Detection On Antarctic Ice-Shelves And Scatterometer Calibration Verification, Lukas Brad Kunz

Theses and Dissertations

Ku-band dual-polarization radar backscatter measurements from the SeaWinds on QuikScat scatterometer and microwave radiometer measurements from the Special Sensor Microwave/Imager (SSM/I) are used to determine periods of surface melt and freeze in the Antarctic ice-shelves. The normalized radar backscatter (sigma-0) and backscatter polarization ratio (PR) are used in the maximum likelihood estimation of the ice-state. This method is used to infer the daily ice-surface conditions for 25 selected study points located on the Ronne, Ross, Larsen, Fimbul, Amery, and Shackleton Ice-shelves. The temporal and spatial variations of the radar response are also observed for various neighborhood sizes surrounding each given …

Fully Compliant Tensural Bistable Mechanisms (Ftbm) With On-Chip Thermal Actuation, Daniel L. Wilcox

Theses and Dissertations

The Fully compliant Tensural Bistable Mechanism (FTBM) class is introduced. The class consists of fully compliant linear bistable mechanisms that achieve much of their displacement and bistable behavior through tension loading of compliant segments. Multiple topologies of designs arising from the FTBM class were designed using a finite element analysis (FEA) model with optimization. In a coupled design approach, thermal actuators were optimized to the force and displacement requirements of the bistable mech-anisms, and selected FTBM devices were combined in switching systems with the result-ing Thermomechanical In-plane Microactuators (TIMs) and Amplified Thermomechanical In-plane Microactuators (ATIMs). Successful on-chip actuation was demonstrated. …

Improving Electromagnetic Bias Estimates, Floyd W. Millet

Theses and Dissertations

The electromagnetic (EM) bias is the largest source of error in the TOPEX/Poseidon and Jason-1 satellite sea surface height (SSH) estimates. Due to incomplete understanding of the physical processes which cause the bias, current operational models are based on empirical relationships between the bias wind speed and significant wave height. These models reduce RMS estimation errors of the EM bias to approximately 4 cm.

To improve EM bias estimation the correlation between the bias and RMS long wave slope is studies using data from tower-based experiments in the Gulf of Mexico and Bass Straight, Australia. Models based on significant wave …

Unitary Space-Time Transmit Diversity For Multiple Antenna Self-Interference Suppression, Adam Lane Anderson

Theses and Dissertations

A common practice for government defense agencies and commercial aeronautical companies is to use dual antennas on test flight air vehicles in order to overcome occlusion issues during high-speed telemetric maneuvers. The dual antennas, though never being masked at the same time, unfortunately lead to a drastic increase in nulls in the signal pattern. The result of this interference pattern can be compared to the effect of fading in a multiple-input multiple-output (MIMO) multi-path scattering environment. Confidence in this comparison leads to the use of unitary space-time MIMO codes to overcome the signal self-interference. The possibility and performance of several …