Engineering Commons^™

Instructors' Expectations And Objectives For Integrating Sustainable Development And Ethical Issues Into The Curriculum, Tauno Aki Tepsa, Juhani Angelva, Maisa Tuulikki Mielikäinen

Practice Papers

The integration of sustainable development and ethical issues into the curriculum is increasingly important in higher education. The study surveyed 17 instructors in ICT engineering education at Lapland University of Applied Sciences who were involved in curriculum development to explore their expectations and objectives in integrating sustainable development and ethical issues into their courses. Although most instructors had a good understanding of sustainable development and ethical issues, not all saw them as relevant to their courses. Those who did incorporate these themes focused on topics such as energy conservation, social sustainability, and sustainability and ethics in solutions. However, almost half …

Supporting Women In Engineering And Technology Through A Collaborative Practice And Support Network Using Targeted Interventions, Michelle Looby, Marie Armstrong, Una Beagon, Emma M Dunne, Svetlana Hensman, Farrah Higgins, Paula Kelly, Isabelle Killane, Susan Lynott, Orla Mcmahon, Bahareh Pahlevanzadeh

Practice Papers

Despite ongoing efforts to recruit and retain women in third level engineering programmes in Ireland, there is still a lack of diversity in these programmes with typically fewer than 20% of students being female. This paper will describe the evolution of a female focused university wide network called WITU (Women in Technology United), which aims to retain female students in engineering and technology programmes, and to increase the number of gender minorities coming onto these programmes. It is also a response to the Sustainable Development Goals, particularly, SDG 4 (quality education), and SDG 5 (gender equality), and addresses actions highlighted …

Advancing An Integrative Perspective Of Identity In Engineering Education (Chapter 9), James L. Huff Ph.D., Monique S. Ross Ph.D.

Engineering and Physics Faculty Research and Publications

Existing research has used identity as a theoretical construct to help us understand a wide array of phenomena, such as engagement and persistence in engineering. By understanding the personal, social, and sociocultural forces that operate in the developmental processes of an individual, we understand how they come to make sense of who they are. Further, we come to learn how they position themselves in relation to what it means to be an engineer. However, identity research in engineering education has supported a diffuse set of theoretical perspectives that do not organically coalesce. This chapter advances an integrated conceptualization of engineering …

Emotions In Engineering Education (Chapter 8), James L. Huff Ph.D., Johanna Lonngren, Ines Dirieto, Roland Tormey

Engineering and Physics Faculty Research and Publications

Contrary to common stereotypes, engineering education and practice are not purely rational activities. Emotions, just like cognition, play important roles in teaching, learning, and professional practice. Today, there is a nascent body of research exploring emotions in engineering education (EEE). However, much of the existing research does not adequately theorize emotions, and the range of theories and methods used is still relatively narrow. With this chapter, we hope to inspire more investigators to conduct EEE research and to explore currently underutilized theories, methods, and research foci. This chapter introduces the reader to the multidisciplinary field of emotion research, then focus …

Could The Inclusion Of Certain Building Information And Modelling Aspects Into The Leaving Certificate Engineering Syllabus, Aid The Transition Of Students Into Third Level Education, When Choosing A Course Within The Construction Industry, Joseph Boyle, Deborah M. Brennan

Capstone Reports

The paper investigates the effects of implementing several Building Information and Modelling (BIM) aspects into the Leaving Certificate Engineering Syllabus and examines the impact this has on students choosing third level Architectural Engineering and Construction (AEC) industry courses with the desire of improving the shortage in the sector. The method and content of the study was based on academic research on second level education in other European countries through the lens of a Literature Review. A sixteen-week pilot program was trialed with over one hundred students at Senior Cycle. The outcomes of the study were critically evaluated through stakeholder interviews …

A Course On Advanced Real-Time Embedded Systems, Krista Round

Master's Theses

This thesis discusses the development of an advanced real-time embedded systems course offered at California Polytechnic State University, San Luis Obispo, which aims to prepare students to design modern complex real-time embedded systems. It describes the goals of the real-time embedded systems curriculum, which includes an introductory and advanced course. Finally, this paper discusses the challenges of creating a successful advanced real-time embedded systems course and proposes changes to the current advanced real-time embedded systems course in response to those challenges.

Create Research Symposium 2022 Book Of Abstracts, Ursa Benedicic, Brian Bowe Prof, Michael Carr Dr, Shannon Chance, Steen Hyldgaard Christensen, Eddie Conlon, Sandra Cruz, Gavin Duffy Dr, Fiona Faulkner Dr, Stella Malkogeorgou, John Mchugh, Mike Murphy Prof, Colm O'Kane Dr, Jye Benjamin O Sullivan, Marianna Pagkratidou Dr, Sheryl Sorby, Marten Westerhof

Other

This is the book of Abstracts for a recent symposium held by the CREATE research Group in TU Dublin.

Virtual Reality As An Education Tool In Biomedical Engineering, Megan Wilkerson

Biomedical Engineering Undergraduate Honors Theses

Virtual Reality (VR) has become more accessible in recent years, both to experience and to create. Various studies have shown that incorporating VR in an educational setting can yield positive results. Virtual reality videos created using course-specific content could prove to be a beneficial educational tool. VR videos were implemented in a remote biomolecular engineering laboratory course. 180° VR videos of lab procedures were recorded and viewed by students using a Google Cardboard headset and their smartphones. After viewing all the VR lab videos, students were given a survey to report their experiences. The survey contained questions used to measure …

Expanding Faculty-Student Interactions In Statics: An Exploratory Study Of A Statics Course With Learning Assistants, Valerie V. Bracho Perez

FIU Electronic Theses and Dissertations

Statics is one of the first fundamental engineering classes within the ME undergraduate curriculum, in which a student’s performance in the course can impact their overall academic success. Recent efforts to enhance students learning in fundamental engineering courses have included integrating Learning Assistants (LAs), undergraduate peers who have previously excelled in the course, into the instructional team of the course. The purpose of this Master's thesis is to explore the enactment of a Statics classroom with LAs, the interactions that characterize it, and the impact it has on the students and instructional teams. A qualitative case study of a Statics …

Emotional Intelligence Of Undergraduate Engineering Students With And Without Internships, Isgard Swana Hueck

Walden Dissertations and Doctoral Studies

Workplace expectations for engineers have changed in the 21st century due to rapid technology advances, globalization, customer centricity, and team-based design practices, which require engineering graduates to have well-developed emotional intelligence (EI) to perform at high levels in the engineering profession. To fill the gap between engineering employers’ expectations and academic preparation of engineering students, internships in engineering industries have shown many benefits as work-based educational strategies in higher engineering education. However, it is not known whether internships also address needed EI levels in engineering students. The purpose of this basic quantitative study was to determine whether global and domain …

Report On The Methodological Framework Of New Pedagogical Approaches – Scenarios Of Future Engneering Education, Bente Nørgaard, Claus Spliid, Una Beagon, Klara Kövesi, Brad Tabas, Riitta Lehtinen, Jenni Koponen, Johannes Spaas

Reports

This report summarises the methodology used to create scenarios as part of the innovative teaching pedagogies proposed in the A-STEP 2030 (Attracting diverSe Talent to the Engineering Professions of 2030) project. This project is an EU Erasmus+ project funded under call number 2018-1-FR01-KA203- 047854. The report begins by describing the overall project and the organisation of the learning and teaching activity. The scenarios were co-created with student participants and academic staff in the learning and teaching activity - A-STEP 2030 Summer School which was held in August 2021. The specific scenarios created by participants are described in this report and …

The A-Step 2030 Summer School, Una Beagon, Johannes Spaas, Klara Kövesi, Brad Tabas, Bente Nørgaard, Claus Spliid, Riitta Lehtinen, Jenni Koponen

Reports

This report outlines the design and evaluation of the Learning and Teaching Activity which forms part of the A-STEP 2030 (Attracting diverSe Talent to the Engineering Professions of 2030) project. This project is an EU Erasmus+ project funded under call number 2018-1-FR01-KA203-047854. The document begins by explaining the purpose and aims of the overall research project and more specifically, the background to the design of the Learning and Teaching Activity. The report provides a detailed description of the organisation of the learning and teaching activity and a summary of the feedback received from participants. Exemplars of the future scenarios co-created …

Students’ Reasons Why Re-Entering The University After Co-Op Experience Is Difficult, Cathryn G. Sebree

Grawemeyer Colloquium Papers

1. Introduction

The purpose of this study was to investigate reasons why the transition from an undergraduate co-op to the academic semester is difficult. Student transitions from co-op back to the institution are difficult for students and this research helps understand why students have difficulty.

Cooperative education programs (co-ops) are partnerships between industries and universities that grant students hands-on experience in their field. Students are benefitted in many ways from co-op experiences, however, there are some instances where the transition back into an academic semester is difficult for students.

This study takes place at a large southeast research institution. The engineering …

Proposing An Engineering Gendered Racial Microaggression Scale, Arielle True-Funk, Cristina Poleacovschi, Gloria Jones-Johnson, Scott Grant Feinstein, Meghan Berger

ASEE North Midwest Section Annual Conference 2020 Publications

Background Minorities in engineering regularly experience negative statements or behaviors of others that disparage them due to their gender, race, ethnicity, or other identity. Students from engineering have cited these persistent subtle negative statements and behaviors, or microaggressions, as reasons for considering leaving engineering programs or the university entirely. Previous measures of microaggressions have not been designed to capture the unique experiences of minorities within the engineering environment.
Purpose This research differs from previous work because it incorporates an intersectional perspective by acknowledging microaggressions are not experienced universally for individuals within all groups or institutions (Crenshaw et al. 1993; Wilkins …

A Statistical Analysis Of The Unm Facets Design Identity & Beliefs Survey Data, Clarissa A. Sorensen-Unruh

Mathematics & Statistics ETDs

The NSF-funded FACETS (Formation of Accomplished Chemical Engineers for Transforming Society, NSF Award 1623105) grant aims to transform the undergraduate engineering experience in the Department of Chemical and Biological Engineering at the University of New Mexico to address attrition within engineering majors, especially among underserved populations (Brainard & Carlin, 1998). The UNM FACETS Design Identity & Beliefs survey, an assessment tool used as part of the research of the grant, generated the dataset used in this study. I performed several different statistical analyses on the dataset, including confirmatory factor analysis (CFA), principal component analysis (PCA), and cluster analysis. The …

Targeted Presentation Skill Trainings To Nurture Construction Management Students At Florida International University, Gabriella D. Santi Kasabdji

FIU Electronic Theses and Dissertations

In today’s fast-paced work environment, competent construction managers (CM) are vital for project success. However, to be competent, these professionals require the mastery of not only technical skills but also soft skills that enable them to achieve their full potential. Regardless, many CM prize technical abilities over the day-to-day writing, speaking, and overall soft skills, assuming these are not as important to the knowledge of complex concepts. Industry leaders confirm this, as evidence states graduate construction managers lack the basic communication skills to “hit the ground running”. That said, academic programs should seek to adapt and nurture these vital skill …

Design Of An Affordable Rotating Drum Electrospinner For Classroom Education, Peder Solberg

The Journal of Undergraduate Research

Electrospinning is a technology used to generate small fibers down to nano-scale size. This method of fiber creation has been around for many years. However, in recent years electrospinning has found increased applications, especially in the area of tissue engineering due to its ability to create fibers with properties similar to the extracellular matrix in tissue. An electrospinning platform can illustrate concepts of engineering, electro-mechanical system design, manufacturing, and biomedical applications in one single package. Hence, it provides an excellent opportunity to integrate into secondary (middle and high school) and post-secondary (undergraduate) technology education.

Furthermore, just as integration of 3D …

Communicating Computing Limitations Through Kinesthetic Pedagogy, Michael Mason

Honors Theses

Abstract concepts, such as those in advanced Computer Science and Mathematics, can be extremely difficult to understand fundamentally without an existing background in a similar subject. Recent research has shown that raw visualizations without learner interaction are not particularly effective at communicating complex information because they allow the learner to ignore the example (Lauer 2006, Naps 2002). Forcing somebody to interact with an example ensures that they can grasp the visualization. This paper describes a six step technique to demonstrate the limitations of computing through kinesthetic pedagogy, then offers an example exercise utilizing the method. The six proposed steps are: …

Fostering Emotional Engineers: Revisiting Constructive Thinking In Engineering Education, Andrea Arce-Trigatti

Journal of Multicultural Affairs

For the past decade, engineering education efforts at the postsecondary level have sought to create a more holistic type of critical thinker (Felder & Brent, 2015; Grasso & Burkins, 2010). As part of this initiative, engineers are encouraged to develop skills associated with constructive thinking—a pedagogical concept rooted in the belief that knowledge is constructed through continual interaction with peers and the environment (Anderson, 2013; Driscoll, 2005; Shayer, 2003). However, despite the positive ramifications linked with this pedagogical shift, studies have demonstrated that the increased use of collaborative aspects associated with constructivist teaching practices may be negatively impacting female students …

Disassemble/Analyze/Assemble: How A Hands-On Engineering Project Affects High School Girls' Science/Engineering Self-Efficacy, Interest And Career Considerations, Jennifer Corbett Ferguson

Theses and Dissertations--Education Sciences

Engineering education as part of the K-12 curriculum can be an effective instructional tool and its benefits include improved science and mathematical achievement as well as an increased interest and understanding of the engineering field, especially for female students. However, there is a serious lack of research-based engineering curriculum being used at the middle and high school levels and lessons most often rely on building or construction competitions. Over the past decade or two, many well-known colleges have implemented a reverse engineering instructional unit known as Disassemble/Analyze/Assemble projects within their introductory engineering courses. These units have been shown to improve …

Contributions Of Role-Playing Games: Advantages Of Incorporating Social Media In Disaster Response, Erin Mullin

Graduate Theses and Dissertations

After a disaster, emergency managers need to know who needs help, what type of help they need, and how soon they need it. Traditionally, they have relied on 911 calls and ground assessments to collect this information. Because the needs of a population are not able to be identified in a timely manner by ground assessments and because individuals are often unable to get through to 911, many civilians in distress turn to social media outlets as a last-ditch effort to obtain the services they need. Due to the uncertainty concerning the accuracy of social media posts, responding to disaster …

A Phenomenographic Study To Investigate What We Mean By The Term “Professional Skills” – Preliminary Findings, Una Beagon, B. Bowe

Conference papers

Recent calls for reform of engineering education have highlighted the importance of treating the engineering education system holistically; not only looking at developing curriculum components nor proposing new teaching pedagogies to enhance graduate skills. One aspect of this holistic view, which has not been given due cognisance is the impact that academic conceptions can have on the experience of the student in the educational system. The authors propose that academics teaching on engineering programmes do not share a common understanding of what we mean by “professional skills”, nor assume the same teaching and learning processes which develop these skills. It …

Usu College Of Engineering Lights Up Salt Palace At Education Conference, Usu College Of Engineering

College of Engineering News

Utah State University was center stage at the Salt Palace Convention Center earlier this week during a major event for engineering education.

Using The Soar Approach To Teach Middle School Students About Math And Science Concepts Found In Engineering, Rachael Wagner

Honors Theses

In order to address the lack of knowledge about the engineering profession in middle-level students, the project described in this Honors Thesis was developed. Through the creation of an afterschool program centered on engineering, students were able to apply the math and science concepts covered to design, build, and test a bridge. One particular lesson from this after-school program was highlighted in this thesis, the lesson covering the Pythagorean Theorem, to demonstrate the use of SOAR methodology in the lesson’s development and later use in the classroom. The effectiveness of the Pythagorean Theorem lesson was evaluated positively based on the …

Upending Assumptions In Engineering Education | College Of Engineering, Usu College Of Engineering

College of Engineering News

It doesn’t make Idalis Villanueva uncomfortable to confront assumptions.

A Cross-Sectional Study Of Engineering Identity During Undergraduate Education, Allison Godwin, Walter C. Lee

School of Engineering Education Faculty Publications

This research paper explores students’ engineering, mathematics, and physics identities across the four years of undergraduate engineering education. The focus of this work are subject-related role identities, or how students position themselves and are positioned by others as the kind of people that engage in engineering, mathematics, or physics. An identity as an engineer is a role identity because it embodies a specific character that an individual plays within a social sphere. In this case, the social sphere is in the process of becoming an engineer. Other research has focused on identity development of engineering students, often either early in …

Board # 102 : Pecase: Implementing K-12 Engineering Standards Through Stem Integration - An Executive Summary Of The Products And Research, Tamara Moore, Kristina Tank, Aran Glancy, Elizabeth Gajdzik

School of Engineering Education Faculty Publications

This executive summary of the grant, PECASE: Implementing K-12 Engineering Standards through STEM Integration, comes at the conclusion of the project. The purpose of the grant was to develop a definition and explore the practice of engineering in K-12 STEM classrooms. The definition was then used to assess curricula, policy documents, teacher practice, and student learning. Through this work, the definition was then used to help with the framing and development of curricula for K-5 classrooms. The resulting curricula are called the PictureSTEM units. These instructional units for K-5 classrooms utilize engineering design and picture books to teach young students …

An Assessment Framework For First-Year Introduction To Engineering Courses, Senay Purzer, Kerrie A. Douglas, Jill A. Folkerts, Taylor V. Williams

School of Engineering Education Faculty Publications

In this evidence-based practice paper, we describe an assessment framework that applies to first-year introductory engineering courses. First-year engineering courses cover a variety of learning objectives that address both technical and professional outcomes outlined in ABET. These courses also often involve open-ended design and modeling projects. The assessment of multiple competencies along with open-ended design can be a challenging task for educators. In this paper, we describe a framework that guides instructional processes for effective assessment for student learning. This assessment-centered teaching and learning framework helps connect specific learning objectives to broader learning goals or competencies and on-going formative feedback …

Board # 113 : Eegrc Poster: Characterizing Trade-Off Decisions In Student Designers, Molly Goldstein

School of Engineering Education Graduate Student Series

Although design and decision-making are intertwined for practicing engineers, students from elementary school through college and graduate schools are not taught to think through uncertain situations (Howard, 2007) in which information is limited or outcomes are not guaranteed. Trade-offs are a complex element of decision, as the decision-making weighs possible outcomes against their respective costs (Otto &Antonsson, 1991). Although much is understood about how professional designers’ behaviors as compared to novice designers and students (Atmen et al., 2007; Crismond & Adams, 2012; Cross, 2003), there is little research regarding making trade-off decisions from middle school and high school to college. …

A Content Analysis Of How Engineering Is Assessed In Published Curricula, Kerrie A. Douglas, Tamara J. Moore, Hillary Merzdorf, Tingxuan Lee, Amanda C. Johnston

School of Engineering Education Faculty Publications

A Content Analysis of How Engineering is Assessed in Published Curricula (Fundamental)

The purpose of this proposal is to present research findings concerning how and what about engineering is commonly assessed in well-known engineering or integrated STEM published curriculum. Two of the major shifts brought about by Next Generation Science Standards (NGSS) are an increased emphasis in students’ capabilities to perform higher-level reasoning skills and integrate content understanding into science practices. At the same time, NGSS has made engineering integration into science education a priority, and it is an exciting time of reform as schools are exploring curriculum resources and …