Engineering Commons^™

Ac Direct Drive Led Lighting Using Low Cost Analog Components, Miles Head

Master's Theses

This project explores the rapidly expanding area of AC direct drive for LED lighting. AC LED driving does not use typical DC-DC converter-based driving but uses semiconductor switches and a linear regulator to activate a number of LEDs proportional to the input voltage at any given time. This allows bulky, expensive magnetics to be eliminated from the system. The goal of this project was to design a scaled-down physical AC LED direct drive system to validate the conclusions of methods for improving efficiency from a previous investigation that found minimizing voltage across the linear regulating MOSFET led to higher efficiency …

Comparison Of Lqr And Lqr-Mrac For Linear Tractor-Trailer Model, Kevin Richard Gasik

Master's Theses

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural …

On-Demand Label Production, Robert A. Zimmerman

Master's Theses

The production and approval process for the various labels used in clinical trials wastes significant time and resources through the need to outsource label production or rely on large reams of pre-cut label stock for each revision throughout the process. An in-house, on-demand label printing and cutting system is a potential remedy to this waste. Previous work by Cheadle et al. resulted in a functional electomechanical prototype of the label cutting aspect of this research, capable of rudimentary linear cuts. In this continued research, emphasis was placed on improved label cutting capabilities and creating PC control software for label design. …

Investigation Of Design, Manufacture, Analysis, And Test Of A Composite Connecting Rod Under Compression, Thomas Juhl Rohrbach

Master's Theses

Composite materials hold great potential for the replacement of traditional materials in machines utilized on a daily basis. One such example is within an engine block assembly where massive components inherently reduce the efficiency of the system they constitute. By replacing metal elements such as connecting rods, cylinder caps, or a crank shaft with composite alternatives, a significant increase in performance may be achieved with respect to mechanical strength, thermal stability, and durability, while also reducing mass. Exploration of this technology applied to a connecting rod geometry was investigated through a combination of process development, manufacturing, numerical analysis and testing. …

Effect Of Bio-Augmentation Product Biowish® Septic Rescue On The Wastewater Treatment Performance Of Residential Septic Tanks, Kimberly Michelle Lamar Merilles

Master's Theses

Residential septic systems provide reliable wastewater treatment for over 26 million homes and facilities in the United States, and many more worldwide. When properly maintained, these systems are reliable, low-cost, and long-term treatments for residential wastewater. When neglected, septic systems can fail and lead to health concerns and ecological harm to soil and groundwater contamination through the improperly treated wastewater effluent.

This study tested the effect of the bio-augmentation product BiOWiSH® Septic Rescue of BiOWiSH® Technologies International, Inc. (hereafter referred to as BiOWiSH) on the biological treatment of residential septic tanks. BiOWiSH is meant to act as a bio-augmentation product …

Strawberry Detection Under Various Harvestation Stages, Yavisht Fitter

Master's Theses

This paper analyzes three techniques attempting to detect strawberries at various stages in its growth cycle. Histogram of Oriented Gradients (HOG), Local Binary Patterns (LBP) and Convolutional Neural Networks (CNN) were implemented on a limited custom-built dataset. The methodologies were compared in terms of accuracy and computational efficiency. Computational efficiency is defined in terms of image resolution as testing on a smaller dimensional image is much quicker than larger dimensions. The CNN based implementation obtained the best results with an 88% accuracy at the highest level of efficiency as well (600x800). LBP generated moderate results with a 74% detection accuracy …

Experimental Study And Modeling Of The Gm-I Dependence Of Long-Channel Mosfets, Michael Fong Cheng

Master's Theses

This thesis describes an experimental study and modeling of the current-transconductance dependence of the ALD1106, ALD1107, and CD4007 arrays. The study tests the hypothesis that the I-gm dependence of these 7.8 µm to 10 µm MOSFETs conforms to the Advanced Compact Model (ACM). Results from performed measurements, however, do not support this expectation. Despite the relatively large length, both ALD1106 and ALD1107 show sufficiently pronounced ‘short-channel’ effects to render the ACM inadequate. As a byproduct of this effort, we confirmed the modified ACM equation. With an m factor of approximately 0.6, it captures the I-gm dependence with sub-28% maximum error …

Experimental Optical Pulse Picker For Lawrence Livermore National Lab, Alexander Thomas Wargo

Master's Theses

Proprietary.

Development Of A Myoelectric Detection Circuit Platform For Computer Interface Applications, Nickolas Andrew Butler

Master's Theses

Personal computers and portable electronics continue to rapidly advance and integrate into our lives as tools that facilitate efficient communication and interaction with the outside world. Now with a multitude of different devices available, personal computers are accessible to a wider audience than ever before. To continue to expand and reach new users, novel user interface technologies have been developed, such as touch input and gyroscopic motion, in which enhanced control fidelity can be achieved. For users with limited-to-no use of their hands, or for those who seek additional means to intuitively use and command a computer, novel sensory systems …

Sweep And Taper Analysis Of Surfboard Fins Using Computational Fluid Dynamics, Brandon James Baldovin

Master's Theses

The research presented here provides a basis for understanding the hydrodynamics of surfboard fin geometries. While there have been select studies on fins there has been little correlation to the shape of the fin and its corresponding hydrodynamic performance. This research analyzes how changing the planform shape of a surfboard fin effects its performance and flow field. This was done by isolating the taper and sweep distribution of a baseline geometry and varying each parameter individually whilst maintaining a constant span and surface area. The baseline surfboard fin was used as a template in Matlab to generate a set of …

Perturbation Based Decomposition Of Semg Signals, Rachel Huettinger

Master's Theses

Surface electromyography records the motor unit action potential signals in the vicinity of the electrode to reveal information on muscle activation. Decomposition of sEMG signals for characterization of constituent motor unit action potentials in terms of amplitude and firing times is useful for clinical research as well as diagnosis of neurological disorders. Successful decomposition of sEMG signals would allow for pertinent motor unit action potential information to be acquired without discomfort to the subject or the need for a well-trained operator (compared with intramuscular EMG). To determine amplitudes and firing times for motor unit action potentials in an sEMG recording, …

Indoor Air Monitoring Of Ethanol And Benzene In A Pilot Winery Using Active Sampling, Andrew I. Kaneda

Master's Theses

Acute indoor concentrations of benzene and ethanol were evaluated in the California Polytechnic State University San Luis Obispo’s pilot winery workroom. Air samples were collected during four different wine-making activities: fermentation, fermentation with Brix content testing, post-alcoholic fermentation pressing, and storage/finishing. Average workroom benzene concentrations ranged from 0.05 to 0.12 mg/m³. Ethanol concentrations in the winery workroom varied with the activity, ranging from 0.9 to 12 mg/m³. Pressing and fermentation with Brix content testing both led to higher indoor ethanol concentrations than fermentation without Brix content testing and storage/finishing.

Tracer gas decay air exchange tests were …

Relevance Analysis For Document Retrieval, Eric Labouve

Master's Theses

Document retrieval systems recover documents from a dataset and order them according to their perceived relevance to a user’s search query. This is a difficult task for machines to accomplish because there exists a semantic gap between the meaning of the terms in a user’s literal query and a user’s true intentions. Even with this ambiguity that arises with a lack of context, users still expect that the set of documents returned by a search engine is both highly relevant to their query and properly ordered. The focus of this thesis is on document retrieval systems that explore methods of …

Wastewater Treatment And Nitrogen Removal In Bench-Scale Photobioreactors Operated With Solids Recycling, Erik Hoffnagle

Master's Theses

This thesis examines the effect of solids recycling on nitrification, organic carbon removal, and algal-bacterial productivity in bench-scale photobioreactors (PBRs) simulating winter pond conditions in San Luis Obispo, California and a 6-acre raceway system in Delhi, California. Two sets of duplicate photobioreactors operated with or without solids recycling were fed primary clarifier effluent (1^oEff) for the first experiment, and facultative pond effluent (FAC) for the second experiment.

In both experiments mean productivity was lower in solids recycled PBRs (3.67 and 2.3 g/m²-day), than in controls without solids recycling (4.15 and 3.9 g/m²-day). When fed …

Design Of A Low-Cost Data Acquisition System For Rotordynamic Data Collection, Gregory S. Pellegrino

Master's Theses

A data acquisition system (DAQ) was designed based on the use of a STM32 microcontroller. Its purpose is to provide a transparent and low-cost alternative to commercially available DAQs, providing educators a means to teach students about the process through which data are collected as well as the uses of collected data. The DAQ was designed to collect data from rotating machinery spinning at a speed up to 10,000 RPM and send this data to a computer through a USB 2.0 full-speed connection. Multitasking code was written for the DAQ to allow for data to be simultaneously collected and transferred …

A Higher-Order Method Implemented In An Unstructured Panel Code To Model Linearized Supersonic Flows, Jake Daniel Davis

Master's Theses

Since their conception in the 1960s, panel codes have remained a critical tool in the design and development of air vehicles. With continued advancement in computational technologies, today's codes are able to solve flow fields around arbitrary bodies more quickly and with higher fidelity than those that preceded them. Panel codes prove most useful during the conceptual design phase of an air vehicle, allowing engineers to iterate designs, and generate full solutions of the flow field around a vehicle in a matter of seconds to minutes instead of hours to days using traditional CFD methods. There have been relatively few …

Assessing Endothelial Dysfunction Estimating The Differences Between 3 Minute And 5 Minute Reactive Hyperemia, Tamiko K. Saldin

Master's Theses

The purpose of this study was to define a lower standard cuff occlusion time to induce reactive hyperemia in assessing endothelial dysfunction. In this study, strong evidence was found by a novel technique that used oscillometric methods, which supported that 3 minute reactive hyperemia was sufficient to elicit a significant difference in arterial compliance from baseline. Twenty healthy Cal Poly students were assessed, (n=12 female, n=8 male) aged 22 years old with a standard deviation of 2.04 years. Arterial compliance was estimated by measuring the peak-to-peak oscillations for baseline, 3 minute reactive hyperemia, and 5 minute reactive hyperemia tests, with …