Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Publication Year
Articles 1 - 30 of 94
Full-Text Articles in Engineering
Ultrahigh Energy Storage Properties In (Sr0.7bi0.2)Tio3-Bi(Mg0.5zr0.5)O3 Lead-Free Ceramics And Potential For High-Temperature Capacitors, Xi Kong, Letao Yang, Zhenxiang Cheng, Shujun Zhang
Ultrahigh Energy Storage Properties In (Sr0.7bi0.2)Tio3-Bi(Mg0.5zr0.5)O3 Lead-Free Ceramics And Potential For High-Temperature Capacitors, Xi Kong, Letao Yang, Zhenxiang Cheng, Shujun Zhang
Australian Institute for Innovative Materials - Papers
2020 by the authors. Due to the enhanced demand for numerous electrical energy storage applications, including applications at elevated temperatures, dielectric capacitors with optimized energy storage properties have attracted extensive attention. In this study, a series of lead-free strontium bismuth titanate based relaxor ferroelectric ceramics have been successfully synthesized by high temperature solid-state reaction. The ultrahigh recoverable energy storage density of 4.2 J/cm3 under 380 kV/cm, with the high efficiency of 88%, was obtained in the sample with x = 0.06. Of particular importance is that this ceramic composition exhibits excellent energy storage performance over a wide work temperature up …
S/N-Doped Carbon Nanofibers Affording Fe7s8 Particles With Superior Sodium Storage, Xiu Li, Tao Liu, Yunxiao Wang, Shulei Chou, Xun Xu, Anmin Cao, Libao Chen
S/N-Doped Carbon Nanofibers Affording Fe7s8 Particles With Superior Sodium Storage, Xiu Li, Tao Liu, Yunxiao Wang, Shulei Chou, Xun Xu, Anmin Cao, Libao Chen
Australian Institute for Innovative Materials - Papers
2020 Iron sulfides draw much attention as electrode candidates for sodium-ion batteries (SIBs) due to the rich chemical stoichiometries and high capacity. However, they usually exhibit poor cycling performance due to the large volume change during sodiation/desodiation process. In this work, we embed Fe7S8 nanoparticles into sulfur, nitrogen-doped carbon (S/N-C) nanofibers through electrospinning/sulfurization processes. The heteroatom doped carbon matrixes could effectively protect the Fe7S8 from structural collapse, obtaining a stable cycling performance. Moreover, the conductive matrixes with 1D structure can facilitate the diffusion of electrons, leading to good rate capability. As results, the as-designed Fe7S8@S/N-C nanofibers present a discharge capacity …
Coupling Topological Insulator Snsb2te4 Nanodots With Highly Doped Graphene For High-Rate Energy Storage, Zhibin Wu, Gemeng Liang, Wei Kong Pang, Tengfei Zhou, Zhenxiang Cheng, Wenchao Zhang, Ye Liu, Bernt Johannessen, Zaiping Guo
Coupling Topological Insulator Snsb2te4 Nanodots With Highly Doped Graphene For High-Rate Energy Storage, Zhibin Wu, Gemeng Liang, Wei Kong Pang, Tengfei Zhou, Zhenxiang Cheng, Wenchao Zhang, Ye Liu, Bernt Johannessen, Zaiping Guo
Australian Institute for Innovative Materials - Papers
Topological insulators have spurred worldwide interest, but their advantageous properties have scarcely been explored in terms of electrochemical energy storage, and their high-rate capability and long-term cycling stability still remain a significant challenge to harvest. p-Type topological insulator SnSb2Te4 nanodots anchoring on few-layered graphene (SnSb2Te4/G) are synthesized as a stable anode for high-rate lithium-ion batteries and potassium-ion batteries through a ball-milling method. These SnSb2Te4/G composite electrodes show ultralong cycle lifespan (478 mAh g−1 at 1 A g−1 after 1000 cycles) and excellent rate capability (remaining 373 mAh g−1 even at 10 A g−1) in Li-ion storage owing to the rapid …
Study On Performance Evaluation Of Co2 Heat Pump System Integrated With Thermal Energy Storage For Space Heating, Zhihua Wang, Yuxin Zheng, Fenghao Wang, Mengjie Song, Zhenjun Ma
Study On Performance Evaluation Of Co2 Heat Pump System Integrated With Thermal Energy Storage For Space Heating, Zhihua Wang, Yuxin Zheng, Fenghao Wang, Mengjie Song, Zhenjun Ma
Faculty of Engineering and Information Sciences - Papers: Part B
CO2 heat pumps have drawn a great deal of attention owing to their advantages of high efficiency and environmental friendly for heating water under low ambient temperature. However, the system performance is not desirable and shows a lower COP for space heating, especially for a radiator as heating terminal, due to the higher inlet water temperature at the gas cooler, which causes a large throttle loss when the refrigerant flow through the throttling device. To tackle this issue, a transcritical CO2 heat pump system integrated with thermal energy storage (TES) systems was developed in this paper. The heating performance of …
Structural Engineering Of Hierarchical Micro‐Nanostructured Ge-C Framework By Controlling The Nucleation For Ultralong Life Li Storage, Shilin Zhang, Yang Zheng, Xuejuan Huang, Jian Hong, Bin Cao, Junnan Hao, Qining Fan, Tengfei Zhou, Zaiping Guo
Structural Engineering Of Hierarchical Micro‐Nanostructured Ge-C Framework By Controlling The Nucleation For Ultralong Life Li Storage, Shilin Zhang, Yang Zheng, Xuejuan Huang, Jian Hong, Bin Cao, Junnan Hao, Qining Fan, Tengfei Zhou, Zaiping Guo
Australian Institute for Innovative Materials - Papers
The rational design of a proper electrode structure with high energy and power densities, long cycling lifespan, and low cost still remains a significant challenge for developing advanced energy storage systems. Germanium is a highly promising anode material for high-performance lithium ion batteries due to its large specific capacity and remarkable rate capability. Nevertheless, poor cycling stability and high price significantly limit its practical application. Herein, a facile and scalable structural engineering strategy is proposed by controlling the nucleation to fabricate a unique hierarchical micro-nanostructured Ge-C framework, featuring high tap density, reduced Ge content, superb structural stability, and a 3D …
Bio‑Derived Hierarchical Multicore-Shell Fe2n‑Nanoparticle‑Impregnated N‑Doped Carbon Nanofiber Bundles: A Host Material For Lithium‑/Potassium‑Ion Storage, Hongjun Jiang, Ling Huang, Yunhong Wei, Boya Wang, Hao Wu, Yun Zhang, Hua-Kun Liu, Shi Xue Dou
Bio‑Derived Hierarchical Multicore-Shell Fe2n‑Nanoparticle‑Impregnated N‑Doped Carbon Nanofiber Bundles: A Host Material For Lithium‑/Potassium‑Ion Storage, Hongjun Jiang, Ling Huang, Yunhong Wei, Boya Wang, Hao Wu, Yun Zhang, Hua-Kun Liu, Shi Xue Dou
Australian Institute for Innovative Materials - Papers
Despite the significant progress in the fabrication of advanced electrode materials, complex control strategies and tedious processing are often involved for most targeted materials to tailor their compositions, morphologies, and chemistries. Inspired by the unique geometric structures of natural biomacromolecules together with their high affinities for metal species, we propose the use of skin collagen fibers for the template crafting of a novel multicore-shell Fe2N-carbon framework anode configuration, composed of hierarchical N-doped carbon nanofiber bundles firmly embedded with Fe2N nanoparticles (Fe2N@N-CFBs). In the resultant heterostructure, the Fe2N nanoparticles firmly confined inside the carbon shells are spatially isolated but electronically well …
A Novel Empirical Heat Transfer Model For A Solar Thermal Storage Process Using Phase Change Materials, Yu Bie, Ming Li, Fei Chen, Grzegorz Krolczyk, Lin Yang, Zhixiong Li, Weihua Li
A Novel Empirical Heat Transfer Model For A Solar Thermal Storage Process Using Phase Change Materials, Yu Bie, Ming Li, Fei Chen, Grzegorz Krolczyk, Lin Yang, Zhixiong Li, Weihua Li
Faculty of Engineering and Information Sciences - Papers: Part B
Numerical and experimental analyses are often used to evaluate the solar thermal system with latent heat thermal energy storage (LHTES). However, the relationship between the numerical simulation and actual heat transfer process is still unclear. This work compares the simulated average temperature of two different phase change materials (PCMs) with experimental result at different operation conditions for the purpose of developing a temperature correction model. A novel empirical heat transfer model is then established to improve the simulation accuracy of PCM-based solar thermal systems. The contributions of this work include that (1) the system performance could be evaluated by the …
Lotus Rhizome-Like S/N-C With Embedded Ws2 For Superior Sodium Storage, Xiu Li, Yonggang Sun, Xun Xu, Yunxiao Wang, Shulei Chou, Anmin Cao, Libao Chen, Shi Xue Dou
Lotus Rhizome-Like S/N-C With Embedded Ws2 For Superior Sodium Storage, Xiu Li, Yonggang Sun, Xun Xu, Yunxiao Wang, Shulei Chou, Anmin Cao, Libao Chen, Shi Xue Dou
Australian Institute for Innovative Materials - Papers
Sodium-ion batteries (SIBs) hold great promise as power sources because of their low cost and decent electrochemical behavior. Nevertheless, the poor rate performance and long-term cycling capability of anode materials in SIBs still impede their practical application in smart grids and electric vehicles. Herein, we design a delicate method to embed WS2 nanosheets into lotus rhizome-like heteroatom-doped carbon nanofibers with abundant hierarchical tubes inside, forming WS2@sulfur and nitrogen-doped carbon nanofibers (WS2@S/N-C). The WS2@S/N-C nanofibers exhibit a large discharge capacity of 381 mA h g-1 at 100 mA g-1, excellent rate capacity of 108 mA h g-1 at 30 A g-1, …
In Operando Mechanism Analysis On Nanocrystalline Silicon Anode Material For Reversible And Ultrafast Sodium Storage, Lei Zhang, Xianluo Hu, Chaoji Chen, Haipeng Guo, Xiaoxiao Liu, Gengzhao Xu, Haijian Zhong, Shuang Cheng, Peng Wu, Jiashen Meng, Yunhui Huang, Shi Xue Dou, Hua-Kun Liu
In Operando Mechanism Analysis On Nanocrystalline Silicon Anode Material For Reversible And Ultrafast Sodium Storage, Lei Zhang, Xianluo Hu, Chaoji Chen, Haipeng Guo, Xiaoxiao Liu, Gengzhao Xu, Haijian Zhong, Shuang Cheng, Peng Wu, Jiashen Meng, Yunhui Huang, Shi Xue Dou, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Presently, lithium-ion batteries (LIBs) are the most promising commercialized electrochemical energy storage systems. Unfortunately, the limited resource of Li results in increasing cost for its scalable application and a general consciousness of the need to find new type of energy storage technologies. Very recently, substantial effort has been invested to sodium-ion batteries (SIBs) due to their effectively unlimited nature of sodium resources. Furthermore, the potential of Li/Li+ is 0.3 V lower than that of Na/Na+, which makes it more effective to limit the electrolyte degradation on the outer surface of the electrode.[1] Nevertheless, one major obstacle for the commercial application …
Plasma-Induced Amorphous Shell And Deep Cation-Site S Doping Endow Tio2 With Extraordinary Sodium Storage Performance, Hanna He, Dan Huang, Wei Kong Pang, Dan Sun, Qi Wang, Yougen Tang, Xiaobo Ji, Zaiping Guo, Haiyan Wang
Plasma-Induced Amorphous Shell And Deep Cation-Site S Doping Endow Tio2 With Extraordinary Sodium Storage Performance, Hanna He, Dan Huang, Wei Kong Pang, Dan Sun, Qi Wang, Yougen Tang, Xiaobo Ji, Zaiping Guo, Haiyan Wang
Australian Institute for Innovative Materials - Papers
Structural design and modification are effective approaches to regulate the physicochemical properties of TiO 2 , which play an important role in achieving advanced materials. Herein, a plasma-assisted method is reported to synthesize a surface-defect-rich and deep-cation-site-rich S doped rutile TiO 2 (R-TiO 2- x -S) as an advanced anode for the Na ion battery. An amorphous shell (≈3 nm) is induced by the Ar/H 2 plasma, which brings about the subsequent high S doping concentration (≈4.68 at%) and deep doping depth. Experimental results and density functional theory calculations demonstrate greatly facilitated ion diffusion, improved electronic conductivity, and an increased …
Construction Of Hierarchical Mose2 Hollow Structures And Its Effecton Electrochemical Energy Storage And Conversion, Sha Hu, Qingqing Jiang, Shuoping Ding, Ye Liu, Zuozuo Wu, Zhengxi Huang, Tengfei Zhou, Zaiping Guo, Juncheng Hu
Construction Of Hierarchical Mose2 Hollow Structures And Its Effecton Electrochemical Energy Storage And Conversion, Sha Hu, Qingqing Jiang, Shuoping Ding, Ye Liu, Zuozuo Wu, Zhengxi Huang, Tengfei Zhou, Zaiping Guo, Juncheng Hu
Australian Institute for Innovative Materials - Papers
Metal selenides have attracted increased attentionas promising electrode materials for electrochemical energy storageand conversion systems including metal-ion batteries and watersplitting. However, their practical application is greatly hindered bycollapse of the microstructure, thus leading to performance fading.Tuning the structure at nanoscale of these materials is an effectivestrategy to address the issue. Herein, we craft MoSe2withhierarchical hollow structures via a facile bubble-assistedsolvothermal method. The temperature-related variations of thehollow interiors are studied, which can be presented as solid, yolk−shell, and hollow spheres, respectively. Under the simultaneousaction of the distinctive hollow structures and interconnectionsamong the nanosheets, more intimate contacts between MoSe2and electrolyte can be …
Economic Operation Optimization Of Battery Energy Storage Systems In A Solar Rich Microgrid, Herath Pathiranage Asanga Priyankara Jayawardana, Massimo Fiorentini, Duane A. Robinson, Ashish P. Agalgaonkar
Economic Operation Optimization Of Battery Energy Storage Systems In A Solar Rich Microgrid, Herath Pathiranage Asanga Priyankara Jayawardana, Massimo Fiorentini, Duane A. Robinson, Ashish P. Agalgaonkar
Faculty of Engineering and Information Sciences - Papers: Part B
The increasing trend of connecting local distributed generation units to the grid has unlocked new economic opportunities for owners. This is supported by the ongoing development of energy storage technologies, especially battery based systems. In practice, battery storage systems typically operate based on control algorithms where tariff structures and future generation and load profiles are not taken into account. This paper investigates the results of a case study for a microgrid using a proposed optimization model which minimizes cost by considering an import/export tariff structure. The effect of changing time resolution related to variations in demand and generation is examined, …
Hierarchical Porous Nio/B-Nimoo4 Heterostructure As Superior Anode Material For Lithium Storage, Zhijian Wang, Shilin Zhang, Hai Zeng, Haimin Zhao, Wei Sun, Meng Jiang, Chuanqi Feng, Jianwen Liu, Tengfei Zhou, Yang Zheng, Zaiping Guo
Hierarchical Porous Nio/B-Nimoo4 Heterostructure As Superior Anode Material For Lithium Storage, Zhijian Wang, Shilin Zhang, Hai Zeng, Haimin Zhao, Wei Sun, Meng Jiang, Chuanqi Feng, Jianwen Liu, Tengfei Zhou, Yang Zheng, Zaiping Guo
Australian Institute for Innovative Materials - Papers
Ternary transition metal oxides (TTMOs) have attracted considerable attention for rechargeable batteries because of their fascinating properties. However, the unsatisfactory electrochemical performance originating from the poor intrinsic electronic conductivity and inferior structural stability impedes their practical applications. Here, the novel hierarchical porous NiO/β-NiMoO4heterostructure is fabricated, and exhibits high reversible capacity, superior rate capability, and excellent cycling stability in Li-ion batteries (LIBs), which is much better than the corresponding single-phase NiMoO4and NiO materials. The significantly enhanced electrochemical properties can be attributed to its superior structural characteristics, including the large surface area, abundant pores, fast charge transfer, and catalytic effect of the …
Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper a novel microencapsulated phase change material (MF-3) has been developed and tested for solar assisted hot water storage systems. Even though the morphology of the sample was affected by the type of emulsifier used for fabrication it recorded the highest energy storage capacity of 126 kJ/kg with encapsulation efficiency of 97.4% as compared with other developed samples. For the purpose of assessing its thermal effectiveness it was theoretically evaluated in a compacted fixed bed TES unit and found to be capable of achieving a higher energy storage density as well as relatively smaller physical storage size than …
Hybrid Model Predictive Control Of A Residential Hvac System With On-Site Thermal Energy Generation And Storage, Massimo Fiorentini, Josh Wall, Zhenjun Ma, Julio H. Braslavsky, Paul Cooper
Hybrid Model Predictive Control Of A Residential Hvac System With On-Site Thermal Energy Generation And Storage, Massimo Fiorentini, Josh Wall, Zhenjun Ma, Julio H. Braslavsky, Paul Cooper
Faculty of Engineering and Information Sciences - Papers: Part A
This paper describes the development, implementation and experimental investigation of a Hybrid Model Predictive Control (HMPC) strategy to control solar-assisted heating, ventilation and air-conditioning (HVAC) systems with on-site thermal energy generation and storage. A comprehensive approach to the thermal energy management of a residential building is presented to optimise the scheduling of the available thermal energy resources to meet a comfort objective. The system has a hybrid nature with both continuous variables and discrete, logic-driven operating modes. The proposed control strategy is organized in two hierarchical levels. At the high-level, an HMPC controller with a 24-h prediction horizon and a …
Construction Of Sno2-Graphene Composite With Half-Supported Cluster Structure As Anode Toward Superior Lithium Storage Properties, Chengling Zhu, Zhixin Chen, Shenmin Zhu, Yao Li, Hui Pan, Xin Meng, Muhammad Imtiaz, Di Zhang
Construction Of Sno2-Graphene Composite With Half-Supported Cluster Structure As Anode Toward Superior Lithium Storage Properties, Chengling Zhu, Zhixin Chen, Shenmin Zhu, Yao Li, Hui Pan, Xin Meng, Muhammad Imtiaz, Di Zhang
Faculty of Engineering and Information Sciences - Papers: Part B
Inspired by nature, herein we designed a novel construction of SnO2 anodes with an extremely high lithium storage performance. By utilizing small sheets of graphene oxide, the partitioned-pomegranate-like structure was constructed (SnO2@C@half-rGO), in which the porous clusters of SnO2 nanoparticles are partially supported by reduced graphene oxide sheets while the rest part is exposed (half-supported), like partitioned pomegranates. When served as anode for lithium-ion batteries, SnO2@C@half-rGO exhibited considerably high specific capacity (1034.5 mAh g−1 after 200 cycles at 100 mA g−1), superior rate performance and remarkable durability (370.3 mAh g−1 …
Preparation Of Microencapsulated Phase Change Materials (Mepcm) For Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis, Tongyu Zhou, Yilin Li
Preparation Of Microencapsulated Phase Change Materials (Mepcm) For Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis, Tongyu Zhou, Yilin Li
Faculty of Engineering and Information Sciences - Papers: Part B
Microencapsulated phase change materials (MEPCM) could be used for energy saving applications in buildings due to their relatively high energy storage capacities at constant temperature, which could passively reduce peak cooling loads in summer. In this study, poly(methyl methacrylate-co-methacrylic acid) (PMMA-MAA) was used as a shell material to fabricate MEPCM by crosslinking methyl methacrylate (MMA) and methacrylic acid (MAA) through in-situ suspension-like polymerization method. The effects of initiator weight percentage and the ratio of shell monomers for the preparation of MEPCM were also investigated. The experimental results showed that the best MEPCM sample was achieved with a shell monomer weight …
A Consumer-Oriented Decision-Making Approach For Selecting The Cloud Storage Service: From Paprika Perspective, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He
A Consumer-Oriented Decision-Making Approach For Selecting The Cloud Storage Service: From Paprika Perspective, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He
Faculty of Engineering and Information Sciences - Papers: Part B
In recent years there is a growth in the number of companies that offers cloud storage solutions. From user’s perspectives, it is becoming a challenging task to choose which cloud storage to use and from whom, based on user’s needs. In this context, no framework can evaluate the decision criteria for selection of cloud storage services. This paper proposes a solution to this problem by identifying the cloud storage criteria and introduces the PAPRIKA approach for measuring the criteria of cloud storage based on client’s preference. This work demonstrated the applicability of the framework (decision model) by testing it with …
Identity-Based Remote Data Integrity Checking With Perfect Data Privacy Preserving For Cloud Storage, Yong Yu, Man Ho Au, Giuseppe Ateniese, Xinyi Huang, Willy Susilo, Yuanshun Dai, Geyong Min
Identity-Based Remote Data Integrity Checking With Perfect Data Privacy Preserving For Cloud Storage, Yong Yu, Man Ho Au, Giuseppe Ateniese, Xinyi Huang, Willy Susilo, Yuanshun Dai, Geyong Min
Faculty of Engineering and Information Sciences - Papers: Part A
Remote data integrity checking (RDIC) enables a data storage server, say a cloud server, to prove to a verifier that it is actually storing a data owner's data honestly. To date, a number of RDIC protocols have been proposed in the literature. However, most of the constructions suffer from the issue of requiring complex key management. That is, they rely on the expensive public key infrastructure (PKI), which might hinder the deployment of RDIC in practice. In this paper, we propose a new construction of identity-based (ID-based) RDIC protocol by making use of key-homomorphic cryptographic primitive to reduce the system …
Dynamic Exergy Analysis For The Thermal Storage Optimization Of The Building Envelope, Valentina Bonetti, Georgios Kokogiannakis
Dynamic Exergy Analysis For The Thermal Storage Optimization Of The Building Envelope, Valentina Bonetti, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
As a measure of energy "quality", exergy is meaningful for comparing the potential for thermal storage. Systems containing the same amount of energy could have considerably different capabilities in matching a demand profile, and exergy measures this difference. Exergy stored in the envelope of buildings is central in sustainability because the environment could be an unlimited source of energy if its interaction with the envelope is optimised for maintaining the indoor conditions within comfort ranges. Since the occurring phenomena are highly fluctuating, a dynamic exergy analysis is required; however, dynamic exergy modelling is complex and has not hitherto been implemented …
Simulation Of The Melting Process Of Ice Slurry For Energy Storage Using A Two-Fluid Lattice Boltzmann Method, Qi Lin, Shugang Wang, Zhenjun Ma, Jihong Wang, Tengfei Zhang
Simulation Of The Melting Process Of Ice Slurry For Energy Storage Using A Two-Fluid Lattice Boltzmann Method, Qi Lin, Shugang Wang, Zhenjun Ma, Jihong Wang, Tengfei Zhang
Faculty of Engineering and Information Sciences - Papers: Part B
Ice slurry can be used as the thermal storage media in latent cool storage systems for both residential and commercial buildings. This paper presents the investigation of the phase change characteristics of the ice slurry using a two-fluid Lattice Boltzmann Method (TFLBM). The melting and migration processes of the ice slurry are simulated by improving the equilibrium distribution function and matching the relevant parameters such as the kinetic viscosity of ice particle cluster and cross-collision coefficient. The sensitivity analysis of the ice slurry viscosity and cross-collision coefficient are achieved through six numerical experiments, and the ice melting in the internal-melt …
Effect Of Storage Environment On Hydrogen Generation By The Reaction Of Al With Water, Yin-Qiang Wang, Wei-Zhuo Gai, Xia-Yu Zhang, Hong-Yi Pan, Zhenxiang Cheng, Pingguang Xu, Zhen-Yan Deng
Effect Of Storage Environment On Hydrogen Generation By The Reaction Of Al With Water, Yin-Qiang Wang, Wei-Zhuo Gai, Xia-Yu Zhang, Hong-Yi Pan, Zhenxiang Cheng, Pingguang Xu, Zhen-Yan Deng
Australian Institute for Innovative Materials - Papers
Al powder was stored in saturated water vapor, oxygen, nitrogen and drying air separately for a time period of up to six months, the degradation behavior of Al activity was characterized by the reaction of Al with water. It was found that water vapor decreased the induction time for the beginning of Al-water reaction and reduced the total hydrogen generation per unit weight of Al, while oxygen increased the induction time and retarded the Al-water reaction. In contrast, the effect of nitrogen and drying air on Al activity was weak. The mechanism analyses indicated that water vapor promoted the hydration …
Oxygen-Free Layer-By-Layer Assembly Of Lithiated Composites On Graphene For Advanced Hydrogen Storage, Guanglin Xia, Yingbin Tan, Xiaowei Chen, Fang Fang, Dalin Sun, Xingguo Li, Zaiping Guo, Xuebin Yu
Oxygen-Free Layer-By-Layer Assembly Of Lithiated Composites On Graphene For Advanced Hydrogen Storage, Guanglin Xia, Yingbin Tan, Xiaowei Chen, Fang Fang, Dalin Sun, Xingguo Li, Zaiping Guo, Xuebin Yu
Australian Institute for Innovative Materials - Papers
A facile hydrogenation-induced self-assembly strategy to synthesize lithium hydride (LiH) nanosheets with a thickness of 2 nm that are uniformly distributed on graphene is reported and designed. Taking advantage of LiH nanosheets with high reactivity and a homogeneous distribution on graphene support as a nanoreactor, the confined chemical synthesis of oxygen-free lithiated composites is effectively and efficiently realized.
Two-Factor Data Security Protection Mechanism For Cloud Storage System, Joseph K. Liu, Kaitai Liang, Willy Susilo, Jianghua Liu, Yang Xiang
Two-Factor Data Security Protection Mechanism For Cloud Storage System, Joseph K. Liu, Kaitai Liang, Willy Susilo, Jianghua Liu, Yang Xiang
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper, we propose a two-factor data security protection mechanism with factor revocability for cloud storage system. Our system allows a sender to send an encrypted message to a receiver through a cloud storage server. The sender only needs to know the identity of the receiver but no other information (such as its public key or its certificate). The receiver needs to possess two things in order to decrypt the ciphertext. The first thing is his/her secret key stored in the computer. The second thing is a unique personal security device which connects to the computer. It is impossible …
Learning Network Storage Curriculum With Experimental Case Based On Embedded Systems, Qingguo Zhou, Jiong Wu, Ting Wu, Jun Shen, Rui Zhou
Learning Network Storage Curriculum With Experimental Case Based On Embedded Systems, Qingguo Zhou, Jiong Wu, Ting Wu, Jun Shen, Rui Zhou
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper, we present an experimental case for the course of "Network Storage and Security," which benefited from an improved learning outcome for our students. The newly designed experiments-based contents are merged into the current course to help students obtain practical experiences about network storage. The experiments aim to build a network storage system based on available resources instead of any specialized network storage equipment. Technically, students can learn general practical knowledge of network storage on iSCSI (a network storage protocol based on IP technology) and also the technologies of embedded system. Through the experimental case, we found that …
Graphene-Wrapped Reversible Reaction For Advanced Hydrogen Storage, Guanglin Xia, Yingbin Tan, Feilong Wu, Fang Fang, Dalin Sun, Zaiping Guo, Zhenguo Huang, Xuebin Yu
Graphene-Wrapped Reversible Reaction For Advanced Hydrogen Storage, Guanglin Xia, Yingbin Tan, Feilong Wu, Fang Fang, Dalin Sun, Zaiping Guo, Zhenguo Huang, Xuebin Yu
Australian Institute for Innovative Materials - Papers
Here, we report the fabrication of a graphene-wrapped nanostructured reactive hydride composite, i.e., 2LiBH4-MgH2, made by adopting graphene-supported MgH2 nanoparticles (NPs) as the nanoreactor and heterogeneous nucleation sites. The porous structure, uniform distribution of MgH2 NPs, and the steric confinement by flexible graphene induced a homogeneous distribution of 2LiBH4-MgH2 nanocomposite on graphene with extremely high loading capacity (80 wt%) and energy density. The well-defined structural features, including even distribution, uniform particle size, excellent thermal stability, and robust architecture endow this composite with significant improvements in its hydrogen storage performance. For instance, at a temperature as low as 350 °C, a …
A Review Of Topologies Of Three-Port Dc-Dc Converters For The Integration Of Renewable Energy And Energy Storage System, Neng Zhang, Danny Sutanto, Kashem M. Muttaqi
A Review Of Topologies Of Three-Port Dc-Dc Converters For The Integration Of Renewable Energy And Energy Storage System, Neng Zhang, Danny Sutanto, Kashem M. Muttaqi
Faculty of Engineering and Information Sciences - Papers: Part A
The application of renewable energy such as solar photovoltaic (PV), wind and fuel cells is becoming increasingly popular because of the environmental awareness and advances in technology coupled with decreasing manufacturing cost. Power electronic converters are usually used to convert the power from the renewable sources to match the load demand and grid requirement to improve the dynamic and steady-state characteristics of these green generation systems, to provide the maximum power point tracking (MPPT) control, and to integrate the energy storage system to solve the challenge of the intermittent nature of the renewable energy and the unpredictability of the load …
Electrochemically Active, Novel Layered M-Znv2o6 Nanobelts For Highly Rechargeable Na-Ion Energy Storage, Yan Sun, Chun-Sheng Li, Qiuran Yang, Shulei Chou, Hua-Kun Liu
Electrochemically Active, Novel Layered M-Znv2o6 Nanobelts For Highly Rechargeable Na-Ion Energy Storage, Yan Sun, Chun-Sheng Li, Qiuran Yang, Shulei Chou, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Electrode materials with a three-dimensional (3D) layered framework and excellent electrochemical stability can provide a new avenue for enhancing the overall performance of promising sodium ion batteries. Here, we show that layered monoclinic (m) - ZnV2O6 nanobelts with high chemical activity for Na-ion energy storage have been effectively fabricated via a rapid microwave irradiation method over the reaction time of 8 h, in which the fabricating efficiency is 24.5 times greater in comparison with the traditional hydrothermal method. The morphology and phase evolutions were verified by means of X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. This study also …
Superior Sodium-Ion Storage Performance Of Co3o4@Nitrogen-Doped Carbon: Derived From A Metal–Organic Framework, Ying Wang, Caiyun Wang, Yijing Wang, Hua-Kun Liu, Zhenguo Huang
Superior Sodium-Ion Storage Performance Of Co3o4@Nitrogen-Doped Carbon: Derived From A Metal–Organic Framework, Ying Wang, Caiyun Wang, Yijing Wang, Hua-Kun Liu, Zhenguo Huang
Australian Institute for Innovative Materials - Papers
Nitrogen-doped carbon coated Co 3 O 4 nanoparticles (Co 3 O 4 @NC) with high Na-ion storage capacity and unprecedented long-life cycling stability are reported in this paper. The Co 3 O 4 @NC was derived from a metal – organic framework ZIF-67, where the Co ions and organic linkers were, respectively, converted to Co 3 O 4 nanoparticle cores and nitrogen-doped carbon shells through a controlled two-step annealing process. The Co 3 O 4 @NC shows a porous nature with a surface area of 101 m 2 g 1 . When applied as an anode for sodium ion batteries …
All-In-One Energy Harvesting And Storage Devices, Ju-Hyuck Lee, Jeonghun Kim, Tae Yun Kim, Md Shahriar Hossain, Sang Woo Kim, Jung Ho Kim
All-In-One Energy Harvesting And Storage Devices, Ju-Hyuck Lee, Jeonghun Kim, Tae Yun Kim, Md Shahriar Hossain, Sang Woo Kim, Jung Ho Kim
Australian Institute for Innovative Materials - Papers
Currently, integration of energy harvesting and storage devices is considered to be one of the most important energy-related technologies due to the possibility of replacing batteries or at least extending the lifetime of a battery. This review aims to describe current progress in the various types of energy harvesters, hybrid energy harvesters, including multi-type energy harvesters with coupling of multiple energy sources, and hybridization of energy harvesters and energy storage devices for self-powered electronics. We summarize research on recent energy harvesters based on the piezoelectric, triboelectric, pyroelectric, thermoelectric, and photovoltaic effects. We also cover hybrid cell technologies to simultaneously generate …