Engineering Commons^™

Biobased Epoxy Asphalt Binder (Beab) For Pavement Asphalt Mixtures, Abdulrahman Fahad Al Fuhaid

USF Tampa Graduate Theses and Dissertations

In recent years, there have been significant concerns about environmental issues, sustainability of infrastructure, and depletion of nonrenewable resources for pavement construction. These concerns have led to substituting petroleum-based paving materials with their biobased counterparts. Research efforts have attempted to produce asphalt from renewable bio-resources. As a special modifier for asphalt, petroleum-based epoxy resin has been used in a few asphalt paving projects that require superior performance of asphalt mixtures. This study attempts to develop a biobased epoxy modifier for asphalt, which may improve asphalt performance at lower economic and environmental costs. Based on the findings from research in the …

Direct Print Additive Manufacturing Of Optical Fiber Interconnects, Roger B. Tipton

USF Tampa Graduate Theses and Dissertations

High performance communications, sensing and computing systems are growing exponentially as modern life continues to rely more and more on technology. One of the factors that are currently limiting computing and transmission speeds are copper wire interconnects between devices. Optical fiber interconnects would greatly increase the speed of today’s electronic devices. In this study it has been demonstrated that by using a new Direct Print Additive Manufacturing (DPAM) process of Fused Deposition Modeling (FDM) of plastic and micro-dispensing of pastes and inks, we can 3D print single and multi-mode optical fibers in a controlled manner such that compact, 3-dimensional optical …

Assessment Of Drinking Water Quality Management And A Treatment Feasibility Study For Brick By Brick Water Storage Tanks In Rakai Uganda, James V. Murduca

USF Tampa Graduate Theses and Dissertations

Reliable access to safe drinking water is one necessity for humans to live without concern for major health risks. The overall goal of this research is to improve the public health, through improved drinking water, for communities in the Rakai District in Uganda, directly, and other communities in the world, indirectly, via dissemination of knowledge. This study specifically assessed the knowledge of drinking water quality in regards to public health, their sanitation measures, and water treatment methods for users of Brick by Brick rainwater harvesting tanks in the Rakai District (N = 28) by using a knowledge, attitudes, and practice …

Promoter Effects On Iron-Based, Sba-15 Supported Ultra-High Temperature Fischer- Tropsch Catalysts, David P. Weber

USF Tampa Graduate Theses and Dissertations

Promoter effects on SBA-15 supported iron Fischer-Tropsch catalysts were investigated for their potential to improve high temperature catalyst performance. FTS catalysts promoted by manganese (0.15%-1.4%), copper (0.15%-1%), and potassium (0.5%-3%), with all percentages stated on the basis of mass percentage of final catalysts, were prepared and tested at 430°C and ambient pressure in a fixed bed reactor. Manganese showed the ability to promote the FT reaction, increasing both the CO conversion and the average chain length of hydrocarbon products. Compared to the unpromoted catalyst composed only of iron supported on SBA-15, 1.4%Mn (mass) promotion of 15% (mass) iron on SBA-15 …

Comparison Of Thermal Glove Wrist-Hand Orthoses In Their Effectiveness On Rheumatoid Arthritis, Brittany E. Mott

USF Tampa Graduate Theses and Dissertations

Rheumatoid arthritis (RA) is an autoimmune disease affecting nearly 1% of the world’s population with symptoms such as inflammation, pain, and reduced strength [1]. Physicians and scientists work to develop pharmaceuticals and medical devices aimed at decreasing the symptoms associated with RA to better the lives of those affected. One of the most recent developments is the addition of thermal therapy gloves to the array of upper limb orthoses available to patients with RA. It was hypothesized that this study will show that orthoses in the form of thermal therapy gloves are beneficial to the patients by reducing symptoms such …

Field Testing Of Affordable Well Head Protection For Locally Manufactured, Self-Supply Pitcher Pumps On Manually Driven Tubewells In Madagascar, Michal Usowicz

USF Tampa Graduate Theses and Dissertations

Lack of water access is an issue of global importance. The WHO and UNICEF’s Joint Monitoring Program estimated that in 2015 71% of the world’s population used a safely managed drinking water source and 89% of the world’s population used an improved water source within a 30-minute round trip of home. Madagascar’s national statistics lags far behind these global statistics with 54% of the population using improved water sources, 31% using unimproved water sources, and 16% with no service at all.

This research studied water access in Madagascar with self-supply Pitcher Pumps attached on hand-driven tubewells. The term self-supply in …

Impact Of Substrate To Inoculum Ratio On Methane Production In High Solids Anaerobic Digestion (Hs-Ad) Of Food Waste, Yard Waste, And Biosolids, Phillip James Dixon

USF Tampa Graduate Theses and Dissertations

High solids anaerobic digestion (HS-AD) is an alternative for managing the organic fraction of municipal solids waste (MSW), which produces mainly methane (CH4) and fertilizer as byproducts. HS-AD offers a potentially more economically and environmentally sustainable option compared with landfilling or incineration waste-to-energy facilities. However, HS-AD is a complex process requiring specific microbial communities working together symbiotically. Previous studies have found that the substrate to inoculum (S/I) ratio affects CH4 production and yield in HS-AD reactors by affecting substrate mass and energy transfer as well as microbial activity. In this thesis, biochemical methane potential (BMP) assays were used to investigate …

Design And Testing Of A Linear Compliant Mechanism With Adjustable Force Output, William Niemeier

USF Tampa Graduate Theses and Dissertations

This thesis presents a novel compliant mechanism with adjustable force output. The force comes from the bending of a rectangular cross section beam within the mechanism. By rotating this beam with a stepper motor, the force output of the mechanism changes. A model was made to simulate this mechanism, and a prototype was made based off of this data. A test apparatus was constructed around this mechanism, and a series of tests were performed. These tests adjusted parameters such as beam rotation speed and weight in order to characterize the system. Adjustments were made based on this information and the …

Defect Detection In Additive Manufacturing Utilizing Long Pulse Thermography, James Pierce

USF Tampa Graduate Theses and Dissertations

Additive Manufacturing (AM), over the years, has seen a tremendous amount of research for improving the manufacturability of materials into final products. The main advantages of additive manufacturing are the minimizing of waste material as it is an additive process. As well as the ability to create custom low-volume products without the need for creation of expensive tooling or programming before manufacturing begins. Because of these advantages, however, AM is susceptible to unique challenges in the quality side of manufacturing. These challenges include minimizing and detecting defects during the build. The focus of this research looks at the capability of …

Embedded System Design Of Low-Power Wearable Bioelectronic Devices, Matthew S. Hopper

USF Tampa Graduate Theses and Dissertations

The miniaturization of electronics in modern times has enabled the possibility of creating a “continuity of care” using small wearable bioelectronic devices. Using wearable devices, such as the Fitbit or Garmin fitness trackers, allows for the exchange of data between devices which can be used to improve the accuracy of data analysis and thus patient health.

In this thesis work, three wearable bioelectronic devices are proposed: an EOG-based eye-gaze tracking assistive technology device for the physically disabled to control a computer cursor, a battery-operated miniaturized polysomnograph that can store and transmit data wirelessly to sleep technicians and a trauma-detecting personal …

Modeling Corrosion Damage And Repair To A 3, Joseph R. Scott

USF Tampa Graduate Theses and Dissertations

The main purpose of this study was to investigate and implement a repair design for corrosion damaged bridge bents in order to resist lateral loading, such as wind loads or ship impact. Using the results from a one-third scale bridge bent constructed and tested for a previous study, non-linear modeling was used to simulate the same corrosion damage and load response. The principle variable considered was damage, represented as a percent of effective area loss of prestressing steel within a designated damage zone along the length of piles. Other influencing variables included: prestress transfer length, localized loss in prestress due …

Analysis Of Ni And Fe-Based Alloys For Turbine Seal Ring Applications, Dawei She

USF Tampa Graduate Theses and Dissertations

Metal sealing rings have been used widely in compressors, turbines and hydraulic devices. Such rings can extend out due to elasticity, and keep close contact with the valve wall, resulting in the formation of a functional seal under pressure. In this project, the failure of metal sealing rings is considered. Sealing component failure due to stress relaxation can threaten the safety of the whole steam turbine. The object of this study was to examine the stress relaxation response and corresponding changes in microstructure of metal sealing rings used in nuclear steam turbine under high temperature and applied stress. The two …

Non-Precious Metal Catalysts For Oxygen Reduction Reaction In Alkaline Solutions, Zhewen Yin

USF Tampa Graduate Theses and Dissertations

Mesoporous WO3 powders were prepared via sol-gel processing synthesis using nonionic surfactant Pluronic (P-123) as the template. The influences of heating temperature on the pore structure and properties of WO3 powders were investigated. Three kinds of modifications were compared and evaluated after finding out the best heating condition. Different amount of lanthanum was doped into mesoporous WO3 to improve its Oxygen Reduction Reaction (ORR) activity. Several factors contributing to the increase of catalytic performance were discussed. Vulcan carbon powder was also used as a support to increase the catalysts’ electrical conductivity as well as dispersity. The component, microstructure and specific …

Visualizing Load Path In Perforated Shear Walls, Ying Chih Chen

USF Tampa Graduate Theses and Dissertations

Shear walls are the primary lateral load resisting elements in bearing wall systems used in masonry construction. Horizontal loads due to wind or earthquake are transferred to vertical walls by diaphragms that are rigid such as concrete floor slabs or flexible such as wood floors. With rigid diaphragms, loads are apportioned to the supporting walls based on their relative rigidity. Walls with openings accommodating doors and windows (“perforated walls”) have reduced rigidity that can be determined using available hand calculation methods. These methods primarily focus on analysis procedures, not on the visualization of the load path that is critically important …

Conversion Of Biomass To Liquid Hydrocarbon Fuels Via Anaerobic Digestion: A Feasibility Study, Ahmad Naqi

USF Tampa Graduate Theses and Dissertations

The use of biomass as a potential feedstock for the production of liquid hydrocarbon fuels has been under investigation in the last few decades. This paper discusses a preliminary design and a feasibility study of producing liquid hydrocarbon fuels from biomass through a combined biochemical and thermochemical route. The process involves anaerobic digestion (AD) of the biodegradable portion of the biomass to produce methane rich gas. The methane rich biogas stream is purified by removing contaminants and upgraded to liquid hydrocarbon fuel in a gas to liquid facility (GTL) via thermochemical conversion route. The biogas conversion involves two major steps: …

Comparison Of Functional Porous Organic Polymers (Pops) And Natural Material Zeolite For Nitrogen Removal And Recovery From Synthetic Urine, Yan Zhang

USF Tampa Graduate Theses and Dissertations

Urine comprises around 1% of domestic sewage volume but holds 80% of total nitrogen. Source separation is a sustainable way to wastewater management than traditional way due to low energy cost and preventing certain pollutants into wastewater treatment plants. Currently, removing and recovering nitrogen from source-separated urine has attracted more and more interests. Of them, ion exchange was used for removal and recovery of nitrogen in the form of ammonia from synthetic urine for potential application as a fertilizer in agriculture. No previous research studies were conducted to investigate the removal and recovery of nitrogen from hydrolyzed urine by ion …

Developing Motion Platform Dynamics For Studying Biomechanical Responses During Exercise For Human Spaceflight Applications, Kaitlin Lostroscio

USF Tampa Graduate Theses and Dissertations

In future human spaceflight missions, with prolonged exposure to microgravity, resistive and aerobic exercises will be countermeasures for bone loss, muscle loss, and decreased aerobic capacity. Two of the exercises of interest are squats and rowing. The cyclic forces produced during these exercises are at relatively low frequencies which are likely to excite structural resonances of space vehicles. Vibration Isolation Systems (VIS) are being designed to be paired with future exploration exercise devices in order to prevent these cyclic exercise forces from impacting the space vehicle. The VIS may be configured such that a platform supports the human and exercise …

Combining Thermo-Plasmonics With Microfluidics For Biological Applications, Sharad Ambardar

USF Tampa Graduate Theses and Dissertations

In this project we, for the first time, integrated microfluidics with thermo-plasmonics. While microfluidics is a popular platform allowing experiments with small volumes of fluid, thermo-plasmonics can be used for powerful particle manipulation including capturing, mixing, filtering and projection. Combined, these two techniques give us an opportunity to work with numerous complex fluids containing particles, cells, and micro-beads. Here we designed, developed and tested several devices demonstrating various aspects of this exciting hybrid technology. This required use of soft lithography, metal deposition, 3D printing, oxygen plasma treatment and several other surface modification techniques. Additional challenges were in the fabrication of …

Supported Perovskite-Type Oxides: Establishing A Foundation For Co2 Conversion Through Reverse Water-Gas Shift Chemical Looping, Bryan J. Hare

USF Tampa Graduate Theses and Dissertations

Perovskite-type oxides show irrefutable potential for feasible thermochemical solar-driven CO₂ conversion. These materials exhibit the exact characteristics required by the low temperature reverse water-gas shift chemical looping process. These properties include structural endurance and high oxygen redox capacity, which results in the formation of numerous oxygen vacancies, or active sites for CO₂ conversion. A major drawback is the decrease in oxygen self-diffusion with increasing perovskite particle size. In this study, the La_0.75Sr_0.25FeO₃ (LSF) perovskite oxide was combined with various supports including popular redox materials CeO₂ and ZrO₂ along with more abundant …

Design And Implementation Of A Ferrocement Improved Cookstove In Rural Panama, Josh Donegan

USF Tampa Graduate Theses and Dissertations

Household air pollution contributes to the premature death of more than 4 million people annually. Improved cookstoves are one technological intervention that can potentially reduce exposure to household air pollution. However, improved cookstove implementation programs need to consider measures to increase sustainability and promote long-term adoption. The objectives of this research were 1) to develop and implement a new ferrocement cookstove for Peña Blanca, a rural indigenous community in the Ngäbe-Bugle region of Panama, 2) to evaluate its potential sustainability in comparison to the most common cooking technologies observed in the community, 3) to prepare a construction manual for the …

Design Of Micro-Scale Energy Harvesting Systems For Low Power Applications Using Enhanced Power Management System, Majdi M. Ababneh

USF Tampa Graduate Theses and Dissertations

The great innovations of the last century have ushered continuous progress in many areas of technology, especially in the form of miniaturization of electronic circuits. This progress shows a trend towards consistent decreases in power requirements due to miniaturization. According to the ITRS and industry leaders, such as Intel, the challenge of managing and providing power efficiency still persist as scaling down of devices continues. A variety of power sources can be used in order to provide power to low power applications. Few of these sources have favorable characteristics and can be designed to deliver maximum power such as the …

Effectiveness Of Biocide Substitution And Management Plan Implementation For The Control Of, Adelmarie Bones

USF Tampa Graduate Theses and Dissertations

After the notorious outbreak and discovery of Legionella bacteria in 1976, the waterborne pathogen was added to the list of disease-causing agents associated with the built environment. Legionella pneumophila was discovered when it was identified as the agent that caused 34 deaths and an outbreak of pneumonia-like symptoms in several attendees of the 1976 American Legion Convention held in Philadelphia (OSHA, 2017).

Recently published data from the year 2015 reported more than 6,000 Legionnaires’ cases identified in the United States (CDC, 2016). This is a concerning number given that one in every ten infected persons will die of the disease. …

Future Hydrological Alterations In The Mekong Delta Under The Impact Of Water Resources Development, Land Subsidence And Sea Level Rise, Thanh Duc Dang, Thomas A. Cochrane, Mauricio E. Arias, Van Pham Dang Tri

Civil and Environmental Engineering Faculty Publications

Study Region: The Mekong floodplains and delta are among the most agriculturally productive and biologically diverse waterscapes of the world, but sea level rise, land subsidence, and the proposed upstream development of over 126 hydropower dams and extensive delta-based water infrastructure have raised concern due to potential impacts on the hydrology of the region.

Study Focus: This study aims to quantify the effects of water infrastructure development, land subsidence and sea level rise on hydrological regimes of the Mekong floodplains and delta through the development and application of a hydrodynamic model.

New Hydrological Insights for the Region: Depending on hydrological …

Assessing The Impacts Of Climate Change On Streamflow And Reservoir Operation In Central Florida, Toni Panaou

USF Tampa Graduate Theses and Dissertations

Climate change is a global concern as it may affect many aspects of life, including water supply. A tool used to model climate change’s impacts is called a General Circulation Model (GCM). GCMs project future scenarios including temperature and precipitation, but these are designed at a coarse resolution and require downscaling for employment for regional hydrologic modeling. There is a vast amount of research on downscaling and bias-correcting GCMs data, but it is unknown whether these techniques alter precipitation signals embedded in these models or reproduce climate states that are viable for water resource planning and management. Using the Tampa, …

Reflections On The Future Of Public Transportation, Joel Volinski

Journal of Public Transportation

No abstract provided.

Is It Time For A Public Transit Renaissance?: Navigating Travel Behavior, Technology, And Business Model Shifts In A Brave New World, Susan Shaheen, Adam Cohen

Journal of Public Transportation

Travel behavior is undergoing a period of significant change in the United States. In 2016, public transit ridership fell in almost all major U.S. metropolitan regions. While Americans are still heavily dependent on the personal automobile for mobility, technological and societal changes are transforming how mobility is accomplished. This paper reviews the convergence of five trends leading to fundamental changes in public transportation: (1) changing generational behavior toward suburbanization and automobility; (2) new attitudes toward information communications technology; (3) shifting attitudes toward sharing and mobility on demand; (4) innovative alternatives to work and non-work travel; and (5) an increasing number …

Not If, But When: Autonomous Driving And The Future Of Transit, Jerome M. Lutin

Journal of Public Transportation

This paper discusses the implications of autonomous vehicle technology on auto use and travel behavior, and the resulting impacts on public transportation. The paper goes on to explore how autonomous driving technology can make more efficient use of bus transportation and improve service to disabled individuals. The paper concludes with recommendations for transit agencies to engage with government and suppliers of autonomous vehicles to promote research, development, and policies that will allow the industry to reap the benefits of this revolutionary and disruptive technology.

Analysis On The Influence Factors Of Accident Severity: Evidence From Urban River-Crossing Tunnels In Shanghai Of China, Wan He, Zhuoye Zhang, Linjun Lu, Zhenyu Wang

CUTR Faculty Journal Publications

To analyze various factors influencing the accident severity of urban river-crossing tunnels, 12 influence factors were selected according to the three traffic elements of vehicle, road, and environment, including accident-involved vehicle type, tunnel length, tunnel speed limit, accident occurrence time, and weather. These factors were based on the historical data of 14 urban river-crossing tunnels in Shanghai. A binary logistic regression model was also utilized to identify significant influence factors and analyze the influence degrees of their accident severity. Significance analysis reveals that accident occurrence place, accident-involved vehicle type, tunnel speed limit, number of vehicles involved, and accident type are …

Can Public Transportation Compete With Automated And Connected Cars?, Ralph Buehler

Journal of Public Transportation

Over the next 30 years, technological innovation will make automobile travel more convenient. Automated and connected vehicles will perform an increasing number of driving tasks without human input and will lure customers away from traditional public transportation. This paper first explores key characteristics of public transportation demand in the United States today--based on an international comparison with other Western countries. Next, the paper provides potential pathways on how public transportation agencies and local governments in the United States could respond to the emergence of automated and connected vehicles. The paper argues that space efficiency in urbanized areas and the rush …

Lies, Damned Lies, Avs, Shared Mobility, And Urban Transit Futures, Graham Currie

Journal of Public Transportation

It seems to me there is a gigantic lot of nonsense discussed about the future of transport and the future of public transport in particular. As a researcher in the field, I find my emotions boiling over. I get angry at blanket statements telling us public transport has no future and it seems to me much of what is talked about regarding transport futures flies in the face of facts and a long history of what knowledge has gleaned about the human condition, economics, cities, and travel. My hope is that readers will see prevailing discourse differently as a result …