Engineering Commons^™

An Evaluation Of Spatial Variability Of Water Stress Index Across The United States: Implications Of Supply And Demand In The East Vs The West, Jennifer Ann Roath

Open Access Theses

In order to support both human and environmental needs, high quality fresh water must be available when and where it is required. As a metric for indicating unsustainable water usage, WSI is only useful when the values reflect accurate interactions between supply and demand; however, the complexity of temporal and spatial variability of available fresh water complicates the analysis of water stress.

The overall goal of this project was to investigate the spatial variability of water stress across the United States and the appropriate spatial scale for management decisions. To accomplish this, a national dataset describing spatial distribution and breakdown …

Finfet Device Optimization At 15nm For Near-Threshold Operation, Jolene Singh

Open Access Theses

Much of the current research in the electronic industry focuses on reducing power consumption of digital circuits. Towards the same many attempts are being made to reduce the operating voltage of the circuits. It has been shown through device and circuit analysis that a circuit consumes minimum energy when operated near threshold voltage. In this thesis I vary device parameters and study their effects on energy consumption and delay of the device for the two regions of operation - superthreshold and near-threshold, using LUTs of IV and CV characteristics, verilogA and hSpice. Finally, device parameters are obtained for an optimum …

Modulation Of Cell-Matrix Interaction For Cryopreservation Of Engineered Tissue, Angela Christine Seawright

Open Access Theses

Long term preservation of functional engineered tissues can significantly advance tissue engineering industry and regenerative medicine. Several preservation techniques have been proposed and investigated for this purpose, and cryopreservation is a leading candidate. While tissues are cryopreserved, ice forms in both the extracellular and intracellular spaces and causes freezing-induced spatiotemporal deformation of the tissue. During this process the cells undergo dehydration by the freezing-induced osmotic pressure difference and mechanical deformation, transmitted through cell-extracellular matrix adhesions. However, the significance and interaction of these cellular level transport and mechanics processes are not well understood. Therefore, this study aims to establish mechanistic understanding …

Modeling Tools For Conformal Orthotic Devices, Steven David Riddle

Open Access Theses

The purpose of this thesis is to advance the design of conformal orthotic devices through the development of two modeling tools to address knowledge gaps in the field.

The field of human orthotics has been continually troubled by identifying successful methods of harnessing devices to the body. Past orthotics have utilized a rigid framework with minimal degrees of freedom (DOFs) driven by hard actuators attached to the body at select anchor points. Many devices design the structure and anchor points such that they reduce the degrees of freedom of a targeted joint, limiting the user's mobility and often causing the …

A Study Of Inkjet Printed Line Morphology Using Volatile Ink With Non-Zero Receding Contact Angle For Conductive Trace Fabrication, Chenchao Shou

Open Access Theses

Inkjet printed lines on a homogeneous solid substrate are studied under the condition that ink evaporation is not negligible and the contact angle exhibits hysteresis with non-zero receding contact angle (NRCA). A new family of line instability is discovered, featured by formation of agglomerations within a line. The agglomeration is explained by a hydrodynamic flow that consistently drives a bead on the substrate towards fresh deposited droplets due to concentration-induced surface tension gradient. Morphologies of lines printed with multiple layers are also explored for the purpose of conductive trace fabrication. A non-uniform morphology is observed across a multi-layer line when …

Product Characterization And Headspace Analysis Of Solar Irradiated Aqueous C60 Clusters, Dan Su

Open Access Theses

Buckminsterfullerene (C60) is an important fullerene material that has drawn much attention and is currently being applied in many different fields. It was discovered in 1985. As its production has largely increased to meet these industrial needs, it is obvious that its environmental occurrence, especially in aqueous systems, will occur. To further provide information for environmental toxicity studies and for its risk assessment, this thesis focuses on the photo transformation processes of aqueous C60 clusters (Aqu/nC60), with a particular interest in measuring any mineralization that occurs under different irradiation conditions. Two sets of experiments were conducted to test for CO2 …

Analysis Of Cyberattacks On Unmanned Aerial Systems, Andrew Morris Shull

Open Access Theses

With the increasing power and convenience offered by the use of embedded systems in control applications, such systems will undoubtedly continue to be developed and deployed. Recently, however, a focus on data-centric systems and developing network-enabled control systems has emerged, allowing for greater performance, safety, and resource allocation in systems such as smart power grids and unmanned military aircraft. However, this increase in connectivity also introduces vulnerabilities into these systems, potentially providing access to malicious parties seeking to disrupt the operation of those systems or to cause damage. Given the high potential cost of a failure in these systems in …

High Speed Turning Of Compacted Graphite Iron (Cgi) Using Controlled Modulation, Tyler Paul Stalbaum

Open Access Theses

Compacted graphite iron (CGI) is a material which emerged as a candidate material to replace cast iron (CI) in the automotive industry for engine block castings. Its thermal and mechanical properties allow the CGI-based engines to operate at higher cylinder pressures and temperatures than CI-based engines, allowing for lower fuel emissions and increased fuel economy. However, these same properties together with the thermomechanical wear mode in the CGI-CBN system result in poor machinability and inhibit CGI from seeing wide spread use in the automotive industry.

In industry, machining of CGI is done only at low speeds, less than V = …

Nutrient Recovery From Anaerobically-Digested Dairy Manure By Struvite Formation And Its Effect On Gas Releases, Zhong Qiao

Open Access Theses

Manure management practices such as anaerobic digestion and lagoon storage have become important issues for large dairy farms partially due to water quality and air quality concerns caused by excess nitrogen and phosphorus. Prior research efforts have proven that struvite formation is an effective method for nutrients recovery from both municipal and agricultural wastewaters. However, little is known about nutrient recovery through struvite formation from anaerobically-digested dairy manure effluents.The effects of struvite precipitation on the releases of gases such as NH3, H2S, and CO2 are also unclear.

In this thesis, both bench-scale tests and pilot-scale storage tests were conducted to …

Analysis Of An Actuated Two Segment Leg Model Of Locomotion, Nikhil Vinayak Rao

Open Access Theses

Research studies on dynamic models of legged locomotion have generally focused on telescoping-type leg models. Such telescoping spring loaded inverted pendulum (SLIP) models have been able to accurately predict observed center of mass (CoM) trajectories. There have been comparatively fewer studies on dynamics of locomotion

with segmented legs. Some earlier studies on the dynamics due to leg segmentation appear straightforward. For example, a simple model with the only joint moment being due to a passive springy knee has been shown to behave similarly to a telescoping spring-mass model. However, in real-life animal locomotion, there are multiple joint-moments acting at the …

Quantum Computing With Steady State Spin Currents, Brian Matthew Sutton

Open Access Theses

Many approaches to quantum computing use spatially confined qubits in the presence of dynamic fields to perform computation. These approaches are contrasted with proposals using mobile qubits in the presence of static fields. In this thesis, steady state quantum computing using mobile electrons is explored using numerical modeling. Firstly, a foundational introduction to the case of spatially confined qubits embodied via quantum dots is provided. A collection of universal gates implemented with dynamic fields is described using simulations. These gates are combined to implement a five-qubit Grover search to provide further insight on the time-dependent field approach. Secondly, the quantum …

Accurate Prediction Of Spectral Phonon Relaxation Time And Thermal Conductivity Of Intrinsic And Perturbed Materials, Tianli Feng

Open Access Theses

The prediction of spectral phonon relaxation time, mean-free-path, and thermal conductivity can provide significant insights into the thermal conductivity of bulk and nanomaterials, which are important for thermal management and thermoelectric applications. We perform frequency-domain normal mode analysis (NMA) on pure bulk argon and pure bulk germanium. Spectral phonon properties, including the phonon dispersion, relaxation time, mean free path, and thermal conductivity of argon and germanium at different temperatures have been calculated. We find the dependence of phonon relaxation time τ on frequency ω and temperature T vary from ~ω^-1.3 to ~ω^-1.8 and ~T^-0.8 to ~T^{-1.8 …}

Flow And Heat Transfer In An L-Shaped Cooling Passage With Ribs And Pin Fins For The Trailing Edge Of A Gas-Turbine Vane And Blade, Irsha Ashok Pardeshi

Open Access Theses

Efficient and effective cooling of the trailing edges of gas-turbine vanes and blades is challenging because there is very little space to work with. In this study, CFD simulations based on steady RANS closed by the shear-stress transport turbulence model were performed to study the flow and heat transfer in an L-shaped duct for the trailing edge under two operating conditions. One operating condition, referred to as the laboratory condition, where experimental measurements were made, has a Reynolds number at the duct inlet of Re_D = 15,000, coolant inlet temperature of T_inlet = 300 K, wall temperature of …

Orientation Controllable Epitaxial Vapor-Liquid-Solid Semiconductor Nanowire Synthesis On Silicon Substrate, Sung Hwan Chung

Open Access Dissertations

Semiconductor nanowires synthesized via the vapor-liquid-solid (VLS) mechanism have attracted extensive research interest in recent years owing to their unique structure as a promising candidate for the future electronic devices. Germanium and silicon nanowires, in particular, are compatible with the current silicon-based technology via direct assembly. However, one of the main challenges for the successful nanowire application in large-scale is the lack of the method for obtaining nanowires in desired positions and directions. Therefore, the comprehensive, systematic understanding of epitaxial nanowire growth and the more suitable method to align nanowires on novel structure are required. In this work, the synthesis …

Interactional Analysis Of Emergent Risks In Institutionally Diverse Construction Projects, Nader Naderpajouh

Open Access Dissertations

Naderpajouh, Nader Ph.D., Purdue University, December 2013. Interactional Analysis of Emergent Risks in Institutionally Diverse Construction Projects. Major Professor: Makarand Hastak.

Construction projects, as complex systems of systems (SOS), increasingly involve institutionally diverse actors that escalate complexity of the projects. Examples of these actors include the export credit agencies, international organizations such as the World Bank, non-governmental organizations (NGO), regulatory actors, transnational organizations, as well as public and community groups. The observed surge in complexity of the projects aim to enhance their robustness in: i) sustaining the increasing demand for service of these projects, and ii) sustaining the contextual fluctuation …

Scheduling In Mohs Micrographic Surgery Clinics, Stephen Vincent Steidle

Open Access Theses

Mohs Micrographic Surgery (MMS) is a surgical method used for the excision of aggressive skin cancers in areas of high cosmetic importance, such as the face and hands. The practice has been gaining popularity worldwide for its low recurrence rates and cosmetic results. Current clinics though are plagued by extreme wait times and an overall poor patient experience. In this paper we look to explore this problem by applying systems engineering principles including optimization and scheduling with the goal of improving the patient experience. Currently, little literature exists exploring the difficulties associated with scheduling for MMS clinic which primarily revolve …

A Database Server For Next-Generation Scientific Data Management, Mohamed Eltabakh, Walid G. Aref, Ahmed Elmagarmid

Cyber Center Publications

The growth of scientific information and the increasing automation of data collection have made databases integral to many scientific disciplines including life sciences, physics, meteorology, earth and atmospheric sciences, and chemistry. These sciences pose new data management challenges to current database system technologies. This dissertation addresses the following three challenges: (1) Annotation Management: Annotations and provenance information are important metadata that go hand-in-hand with scientific data. Annotating scientific data represents a vital mechanism for scientists to share knowledge and build an interactive and collaborative environment. A major challenge is: How to manage large volumes of annotations, especially at various granularities, …