Engineering Commons^™

2006 Summary Of Highway Revenues, Distributions, & Expenses For Indiana Counties, Cities, & Towns, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This report provides information on revenues, distributions, and expenses of state and local governments for highway, road, and street work. Since the Motor Vehicle Highway (MVH) and Local Road and Street (LRS) Accounts are the principal source of funds for local road or street construction and maintenance operations, this summary may be used to see the trends in income sources and in the expenses charged to the funds prior to their being distributed to the highway, road, and street agencies.

Simulation Of Phonon Transport Across A Non-Polar Nanowire Junction Using An Atomistic Green's Function Method, W Zhang, N Mingo, Timothy Fisher

Birck and NCN Publications

Phonon transport across a non-polar nanowire situated between two semi-infinite contacts is simulated in this paper using the atomistic Green's function method. Abrupt geometric changes between the nanowire and bulk contacts are handled by self-energy matrices obtained from bare surface Green's functions. Transport properties such as phonon transmission functions and thermal conductances are calculated, and their dependencies on the interatomic potential, length, diameter, shape, and lattice orientation are investigated. The results reveal that the overall thermal conductance of the nanowire-bulk-contact structure increases with nanowire diameter while the normalized thermal conductance approaches an asymptotic value. Thermal conductance decreases significantly with increasing …

2007 Summary Of Major Moves Money Distribution, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This report contains a summary of local units' use of the Major Moves funding to enhance their transportation systems provided for by the Indiana Legislature passing of House Bill 1008 on March 14, 2006.

The information contained herein is from either written or verbal responses to a survey that was sent to all Indiana counties and to the Indiana cities and towns over 20,000 in population. A copy of this survey can be found in the Appendix. In Appendix I, you will find a copy of the survey that was sent. Appendix II contains a table containing a breakdown of …

Gold Nanorods Mediate Tumor Cell Death By Compromising Membrane Integrity, Ling Tong, Yan Zhao, Terry B. Huff, Matthew N. Hansen, Alexander Wei, Ji-Xin Cheng

Other Nanotechnology Publications

Folate-conjugated gold nanorods targeted to tumor cell surfaces produced severe membrane damage upon near-infrared irradiation. Photoinduced injury to the plasma membrane resulted in a rapid increase in intracellular calcium (shown in green) with subsequent disruption of the actin network, featured prominently by the formation of membrane blebs.

In Vivo Quantitation Of Rare Circulating Tumor Cells By Multiphoton Intravital Flow Cytometry, Wei He, Haifeng Wang, Lynn C. Hartmann, Ji-Xin Cheng, Phillip S. Low

Other Nanotechnology Publications

Quantitation of circulating tumor cells (CTCs) constitutes an emerging tool for the diagnosis and staging of cancer, assessment of response to therapy, and evaluation of residual disease after surgery. Unfortunately, no existing technology has the sensitivity to measure the low numbers of tumor cells (< 1 CTC per ml of whole blood) that characterize minimal levels of disease. We present a method, intravital flow cytometry, that noninvasively counts rare CTCs in vivo as they flow through the peripheral vasculature. The method involves i.v. injection of a tumor-specific fluorescent ligand followed by multiphoton fluorescence imaging of superficial blood vessels to quantitate the flowing CTCs. Studies in mice with metastatic tumors demonstrate that CTCs can be quantitated weeks before metastatic disease is detected by other means. Analysis of whole blood samples from cancer patients further establishes that human CTCs can be selectively labeled and quantitated when present at approximate to 2 CTCs per ml, opening opportunities for earlier assessment of metastatic disease.

Brillouin-Zone Unfolding Of Perfect Supercells Having Nonequivalent Primitive Cells Illustrated With A Si/Ge Tight-Binding Parameterization, Timothy B. Boykin, Neerav Kharche, Gerhard Klimeck

Birck and NCN Publications

Numerical calculations of nanostructure electronic properties are often based on a nonprimitive rectangular unit cell, because the rectangular geometry allows for both highly efficient algorithms and ease of debugging while having no drawback in calculating quantum dot energy levels or the one-dimensional energy bands of nanowires. Since general nanostructure programs can also handle superlattices, it is natural to apply them to these structures as well, but here problems arise due to the fact that the rectangular unit cell is generally not the primitive cell of the superlattice, so that the resulting E(k) relations must be unfolded to obtain the primitive- …

2007 Model County Highway Ordinances, Indiana Ltap, Indiana Association Of County Engineers And Supervisors

Indiana Local Technical Assistance Program (LTAP) Publications

This report is intended to provide model ordinances for common situations for county highway departments and local street departments in Indiana where no current sample or model ordinance is readily available. Information to prepare model ordinances was collected from other Indiana counties and municipalities. Some of the model ordinances were created at the request of local highway and street departments.

The purpose of this report was not to duplicate regulations already in place such as where state governments cover issues such as road signage, or traffic control, but to provide references for situations that have no other regulation or where …

Physics Of Ultrathin-Body Silicon-On-Insulator Schottky-Barrier Field-Effect Transistors, Joachim Knoch, M Zhang, Joerg Appenzeller, S Mantl

Other Nanotechnology Publications

In this article we give an overview over the physical mechanisms involved in the electronic transport in ultrathin-body SOI Schottky-barrier MOSFETs. A strong impact of the SOI and gate oxide thickness on the transistor characteristics is found and explained using experimental as well as simulated data. We elaborate on the influence of scattering in the channel and show that for a significant barrier the on-state current is insensitive to scattering once the mean free path for scattering is larger than a characteristic length scale. In addition, recent efforts to lower the Schottky barrier at the source/drain channel interfaces are presented. …

Understanding Coulomb Effects In Nanoscale Schottky-Barrier-Fets, Klaus M. Indlekofer, Joachim Knoch, Joerg Appenzeller

Other Nanotechnology Publications

We employ a novel multiconfigurational self-consistent Green's function approach (MCSCG) for the simulation of nanoscale Schottky-barrier-field-effect transistors (SB-FETs). This approach allows the calculation of electronic transport with a seamless transition from the single-electron regime to room-temperature FET operation. The particular improvement of the MCSCG stems from a self-consistent division of the channel system into a small subsystem of resonantly trapped states for which a many-body Fock space approach becomes numerically feasible and the rest of the system which can be treated adequately on a conventional mean-field level. The Fock space description allows for the calculation of few-electron Coulomb charging effects …

1/F Noise In Carbon Nanotube Devices - On The Impact Of Contacts And Device Geometry, Joerg Appenzeller, Yu-Ming Lin, Joachim Knoch, Zhihong Chen, Phaedon Avouris

Other Nanotechnology Publications

We report on the 1/f noise in various ballistic carbon nanotube devices. A common means to characterize the quality of a transistor in terms of noise is to evaluate the ratio of the noise amplitude A and the sample resistance R. By contacting semiconducting tubes with different metal electrodes we are able to show that a small A/R value by itself is no indication of a suitable metal/tube combination for logic applications. We discuss how current in a nanotube transistor is determined by the injection of carriers at the electrode/nanotube interface, while at the same time excess noise is related …

Statistical Analysis Of Joint Short-Term And Long-Term Survival In Resuscitation Research, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

Objective: To develop statistical tools that utilize combined initial survival data and post-resuscitation survival data to test the null hypothesis that true, population-wide outcomes following experimental CPR interventions are not different from control. Method: A new test statistic, d2, for evaluating Type 1 error is derived from a bivariate, two-dimensional analysis of categorical initial resuscitation and post-resuscitation survival data, which are statistically independent because they are obtained during non-overlapping periods of time. The d2 test statistic, which is distributed as a chi-squared distribution, is derived from first principles and validated using Monte Carlo methods of computer simulation for thousands of …

2007 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for agency officials and employees responsible for Indiana’s local road infrastructure.

Improved Carrier Injection In Ultrathin-Body Soi Schottky-Barrier Mosfets, M Zhang, Joachim Knoch, Joerg Appenzeller, S Mantl

Other Nanotechnology Publications

The impact of the gate oxide and the silicon-on-insulator (SOI) body thickness on the electrical performance of SOI Schottky-barrier (SB) MOSFETs with fully nickel silicided source and drain contacts is experimentally investigated. The subthreshold swing S is extracted from the experimental data and serves as a measure for the carrier injection through the Sills. It is shown that decreasing the gate oxide and body thickness allows to strongly increase the carrier injection and hence, a significantly improved ON-state of SB-MOSFETs can be obtained.

Hyperthermic Effects Of Gold Nanorods On Tumor Cells, Terry B. Huff, Ling Tong, Matthew N. Hansen, Ji-Xin Cheng, Alexander Wei

Other Nanotechnology Publications

Plasmon-resonant gold nanorods, which have large absorption cross sections at near-infrared frequencies, are excellent candidates as multifunctional agents for image-guided therapies based on localized hyperthermia. The controlled modification of the surface chemistry of the nanorods is of critical importance, as issues of cell-specific targeting and nonspecific uptake must be addressed prior to clinical evaluation. Nanorods coated with cetyltrimethylammonium bromide (a cationic surfactant used in nanorod synthesis) are internalized within hours into KB cells by a nonspecific uptake pathway, whereas the careful removal of cetyltrimethylammonium bromide from nanorods functionalized with folate results in their accumulation on the cell surface over the …

Alternative Material Dowel Bars For Rigid Pavement Joints, Purdue Ect Team

ECT Fact Sheets

Over the last thirty to forty years, dowel support of the joint in Rigid Joint Pavement (RJP) has been widely used. The problem of deterioration of concrete pavement joints has resulted in the search for alternate solutions. Fiber-reinforced polymer (FRP) and stainless steel represent corrosion resistant alternatives to conventional galvanized steel in this application. The recently study by the FHWA of Alternative Materials for Highway Construction demonstrated that even with extended wet-dry cycles of exposure to fluids of high chloride content, at various temperatures and PH levels, stainless steel had corrosion resistance hundreds and in many cases thousands of times …

Snap-Tite Composite Column Reinforcement, Purdue Ect Team

ECT Fact Sheets

Recent earthquakes throughout the world have demonstrated the vulnerabilities of older reinforced concrete columns to seismic deformation demands. The Snap Tite Composite Column Reinforcement strengthens a concrete column by confining it in an external composite jacket, which prevents the concrete from expanding during seismic activity or prolonged freeze-thaw cycles. The pre-manufactured fiberglass jacket is comprised of glass fibers and corrosion resistant isopolyester resins.

Gfrc Facade Panels With Steel Stud/Flex Anchor Connection, Purdue Ect Team

ECT Fact Sheets

The ability of building cladding systems to perform successfully depends primarily on their proper design and construction. Current practices in the United States utilize GFRC (Glass Fiber Reinforced Concrete) panels. However, new problems are being detected with such systems. The facade and its attachments (using GFRC) are not being adequately implemented to accommodate vertical and horizontal differential movement between the panels and concrete frame which is resulting in failure or cracking of the panels, and chipping off of the supporting concrete. With proper design and construction, steel stud-framed GFRC-skin cladding concept provides a versatile system for freedom of expression in …

Frp Deck - Rehabilitation Of A Steel Truss Bridge, Purdue Ect Team

ECT Fact Sheets

To avoid a costly bridge replacement project, the New York State Department of Transportation partnered with private industry to rehabilitate a steel truss bridge using lightweight composites. Reducing dead load on the bridge by 265 tons, the application of composite deck technology doubled the load ratings (to a level higher than the original design) and allowed weight restrictions to be removed, while saving $1.4 million. This was the first time this type of rehabilitation was accomplished in the U.S. FRP bars appear to be promising alternative to steel reinforcement in concrete structures such as marine structures, parking structures, bridge decks, …

Superpave System, Purdue Ect Team

ECT Fact Sheets

The Superpave is the acronym for 'SUperior PERforming Asphalt PAVEments' system. It was developed by Strategic Highway Research Program (SHRP) to give highway engineers and contractors the tools they need to design asphalt pavements that will perform better under extremes of temperature and heavy traffic loads.

Atlss Integrated Building System, Purdue Ect Team

ECT Fact Sheets

The AIBS (ATLSS Integrated Building Systems) program was developed to coordinate ongoing research projects in automated construction and connection systems. The objective of this technology is to design, fabricate, erect, and evaluate cost-effective building systems with a focus on providing a computer integrated approach to these activities.

Simcon: Slurry Infiltrated Mat Concrete, Purdue Ect Team

ECT Fact Sheets

The cost of civil infrastructure constitutes a major portion of the national wealth. Its rapid deterioration has thus created an urgent need for the development of novel, long-lasting and cost-effective methods for repair, retrofit and new construction. A promising new way of resolving this problem is to selectively use advanced composites, such as High-Performance Fiber Reinforced Cementitious Composites (HPFRCCs). The investigations conducted in North Carolina University have demonstrated that a special type of continuous fiber-mat HPFRCC, called SIMCON which stands for Slurry Infiltrated Mat Concrete, is well suited for the development of novel repair, retrofit and new-construction solutions that lead …

Snap Joint Technology For Composite Structures, Purdue Ect Team

ECT Fact Sheets

The optimum composite joint design is the one capable of distributing stresses over a wide area rather than to concentrate them at a point. Adhesively bonded joints can satisfy these requirements, however, most of the adhesives are brittle, and brittle failure is unavoidable. This was the motivation of developing what is called the SNAP joint. The snap joint technology developed by W. Brandt Goldworthy & Associates, Inc. The concept is based on similar joining technology used for connecting wooden parts (wood is considered as natural orthotropic composites). Also, this technique is very similar to techniques which were used a decade …

Ultrascreen - Sight And Sound Barrier Partition Walls, Purdue Ect Team

ECT Fact Sheets

Panels have been widely used for many years to act as sight and sound barriers in most of the highways and in residential areas where visual privacy is needed. The United States Gypsum Company, early in the 1980's started developing technologies to improve and reduced costs using lightweight cement panels. Recently, USG along with AFM Corporation introduced ULTRASCREEN: Sight and Sound Barrier. This lightweight panels require no special equipment for installation, maintenance, or replacement making them beneficial. This latest development also creates a system with good acoustical performance and excellent strength to weight ratio.

Substiwood™ - Concrete Lumber, Purdue Ect Team

ECT Fact Sheets

In the United States, wood lumber products have always formed the primary (and secondary) elements of many types of construction, especially in the single-and multi-family housing sector. A new cementitious material, 'concrete lumber' products (SubstiwoodTM) developed by Substiwood Inc. is structurally strong, durable, nailable with conventional screws and nails, and sawable using hand or electric saws. Unlike other construction alternatives to wood framing, the SubstiwoodTM products essentially maintain the existing wood frame construction methods, processes, equipment, and skilled labor.

Frp Rebar (Afrp, Cfrp, Gfrp), Purdue Ect Team

ECT Fact Sheets

Insufficient concrete cover, poor design or workmanship, and presence of large amounts of aggressive agents including environmental factors all can lead to cracking of the concrete and corrosion of the steel rebar. The problems of steel corrosion are avoided with the use of FRPs because FRP materials are nonmetallic and noncorrosive. In addition, FRP materials exhibit several properties including high tensile strength, that make them suitable for the use as structural reinforcement. Furthermore, codes and design guide provisions have been recently prepared for the use of FRP bars in concrete structures for bridges and buildings.

Pavemend - Ceracrete Rapid Repair Products, Purdue Ect Team

ECT Fact Sheets

Repair of concrete continues to be a major maintenance item in the budget of many agencies. There are many circumstances in which a rapid repair is highly desirable. Ceracrete Technologies, Inc. (CTI) is a Richmond, Virginia-based small business. CTI focuses on the manufacture of commercial products for construction applications using non-hazardous inorganic recovered raw materials to replace conventional virgin raw materials. Ceracrete technology is a chemical bonding process that uses very high percentages of coal ash, municipal solid waste ash, foundry sand residue, dredge material, flue gas desulferization by-products, etc. to create rapid concrete repair products.

Steel-Free Concrete Bridge Deck, Purdue Ect Team

ECT Fact Sheets

Eliminating corrosion makes concrete deck slabs virtually maintenance-free, which makes life cycle costs of steel-free concrete decks much lower than reinforced concrete decks. In response, compressive membrane forces develop in the concrete deck. Ultimate load can be greater than the load at which the same deck would fail if it were reinforced conventionally.

Pothole Repairing Compound : Bondade Tcu-31, Purdue Ect Team

ECT Fact Sheets

Conventional asphalt-based tacking materials such as hot asphalt-cement, cutbacks or emulsions cannot be applied without specialized spraying and heating equipment. With current methods of repair, nearly half of the potholes filled today will fail within six months. Bondade uses readily available spraying equipment to wet the surface and develop a tenacious bond between the asphalt and the existing substrate. It is an environmentally safe and non-hazardous material that may be used with hot or cold asphalt concrete, under damp or dry conditions and on nearly all surfaces.

Use Of Composite Piping Offshore, Purdue Ect Team

ECT Fact Sheets

The high cost to replace steel piping in retrofit applications and increased longevity in new construction is driving the search for composite materials which are able to withstand the severe conditions experienced by offshore facilities. Advantages of composite piping compared to steel piping are: inherent corrosion resistance, lighter weight, ease of fabrication, lower maintenance costs, and lower life cycle costs.

Precast Inverted T Beam, Purdue Ect Team

ECT Fact Sheets

Current systems are either costly or time consuming to erect and have limitations. Cast-in-place slabs have become too expensive and time-consuming due to extensive field formwork. The Nebraska Inverted Tee (IT) system was designed for use by small contractors in sparsely populated areas where relatively modest erection equipment exists. The ITs were developed in "hard" metric units, i.e., using round-figure millimeters.