Engineering Commons^™

Elevated Temperature Progressive Damage And Failure Of Duplex Stainless Steel, Darren P. Luke

Civil Engineering ETDs

Ductile failure of metals has been the focus of research efforts within academia and industry for many years since it is tremendously important for understanding the failure of structures under extreme loading conditions. However, limited research has been dedicated to elevated temperature ductile failure, which is critical for evaluating catastrophic events such as industrial, structural or shipping vessel fires. A detailed investigation was conducted on the structural response of Duplex Stainless Steel at elevated temperatures. The temperature dependence of elastic modulus, yield strength, ultimate strength, and ductility was measured up to 1000°C and a continuum damage plasticity model was developed. …

Aversion And Warning Factors For Assessing Existing Reinforced Concrete Structures, Marcie Van Weerdhuizen

Electronic Thesis and Dissertation Repository

In a world of aging infrastructure, sustainability initiatives require additional investment in the assessment of existing reinforced concrete structures. Reliability-based assessment should minimize costs by reducing conservatism, while ensuring levels of safety equivalent to those for new designs. Current Canadian and US provisions assign target reliability levels for structural assessment based on criteria including occupancy type, expected failure behaviour, and the effect of element failure on the overall structural integrity. These criteria are defined using discrete and qualitative parameter values. It is shown that the true structural conditions can be better represented by verifying the applicability and completeness of these …

On The Development Of 8,000 Psi Geopolymer Mortar For Practical Use In Field Applications, Remington Gabriel Reed

Graduate Theses and Dissertations

Although there are several perceived benefits from the use of geopolymer binder as an alternative to ordinary portland cement in concrete materials, it is not widely used in field applications. Geopolymer materials have no set guidelines for mixture design and often require heat curing to facilitate strength gain. Additionally, many geopolymers are created using carefully controlled and high quality materials and activator chemicals. These factors greatly affect the practicality of the material. The goal of this research was to create a geopolymer material capable of achieving high compressive strengths at 28 days without heat curing, and using only readily available …

Developing Ultra-High Performance Concrete (Uhpc) With Locally Available Materials, Ali Alsalman

Graduate Theses and Dissertations

Ultra-High Performance Concrete (UHPC) can enhance the durability and resilience of concrete structures. The use of local materials is a fundamental step to save energy and reduce the cost of concrete. The main focus of this research was to develop a UHPC with compressive strength of 150 MPa using locally sources materials. In this study, the effect of fine materials, binder type and content, type of mixer, steel fibers and curing regimes on concrete’s compressive strength were investigated. The relationship between compressive strength and elastic modulus was also studied. This study synthesizes all relevant experimental data in the literature to …

Effect Of Continuity Plate Eccentricity On The Performance Of Welded Beam-To-Column Connections, Jason Thomas Norwood

Graduate Theses and Dissertations

Beam-to-column connections in structural steel buildings may have varying degrees of rotational restraint and varying degrees of moment transfer. In fully restrained moment connections, shear is typically transferred through the beam web, while the moment is mostly transferred through the beam flanges which create tension/compression force couples. Column sections that are incapable of resisting these flange forces are often retrofitted with continuity plates within the connection region to improve capacity. In cases of unequal beam depths on either side of the column, an eccentricity between the framed-in beam flange and continuity plate may be required; however, limited research exists to …

Utilizing The Hvsr Second Peak For Surface Wave Inversions In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

Ambient noise data from 24 sites within the Mississippi Embayment were analyzed to estimate the fundamental frequency using the horizontal to vertical spectral ratio (HVSR) method. The fundamental frequency ranged from 0.17 to 3.43 Hz for the tested sites. At seventeen of the sites, a second higher frequency HVSR peak, which ranged from 0.617 Hz to 2.154 Hz, was observed in addition to the fundamental HVSR peak. The second peak frequency in the HVSR curve has been attributed by previous researchers as either an odd harmonic of the fundamental peak or a shallow impedance contrast from the Memphis sand layer …

Effect Of Cement Content On Concrete Performance, Caleb Joshua Lebow

Graduate Theses and Dissertations

Of all the traditional concrete materials, portland cement has the greatest impact on mixture cost and the environment. Cement is in many ways the glue holding concrete together (Weiss, 1999), and as such, it plays a major role in fresh and hardened concrete properties. Without the proper range of cement in the mixture, low strength development or excessive shrinkage may occur leading to premature deterioration. The Arkansas Department of Transportation (ARDOT) recognizes two types of concrete for use in bridge construction, Class S and Class S(AE). This paper focuses on the findings from testing of Class S(AE) concrete, short for …

Developing Computer Codes For Analyzing Bridge Response Due To Wim Data Truck Loading, Kenneth Patrick Pasley

Graduate Theses and Dissertations

Despite actual truck demographics evolving over the past 30 years, the Arkansas legal loads for bridge posting have not been updated. Custom computer codes were developed.to facilitate comparison between the current Arkansas legal loads for bridge posting and the actual Arkansas truck traffic to ensure that actual reactions are enveloped by the state'. The program, WIMFluence, calculates shear and moment influence lines for a bridge and the resulting shear and moment reactions based on weigh-in-motion data. With supporting scripts, the reactions due to actual Arkansas truck traffic were compared to those due to the current Arkansas legal loads for bridge …

The Live Load Response Of The Open Web Steel Joist Black Slough Bridge, Piero Caputo

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The bridge being studied spans the Black Slough River in the Nucor/Vulcraft facilities near Brigham City, Utah. The bridge is composed of seven heavyweight open web steel joists supporting a concrete deck-slab element and sitting in two concrete cantilever walls serving as bearings. A full-scale live-load test was performed using forklift vehicles at four locations on the deck. During the test, axial strains, deflections, and rotations where measured.

In their provisions, the American Association of State Highway and Transportation Officials (AASHTO) included a simplified number of equations and solutions used to calculate GDFs for standardized decks supported by beam systems. …

Development Of Thermoplastic Composite Reinforced Ultra-High Performance Concrete Panels For Impact Resistance, Reagan M. Smith Gillis

Electronic Theses and Dissertations

Recent studies investigating the impact performance of ultra-high performance concrete (UHPC) reported a quasi-brittle flexural failure that transitioned to a brittle punching-shear failure as the size of the impact head was reduced. A potential technology to increase the flexural strength and impact resistance of concrete is applying fiber reinforced polymer (FRP) composites to the exterior faces of the beam or slab. In this work, E-glass fiber reinforced thermoplastics were utilized in two different systems to apply reinforcement to UHPC. Thermoplastic materials were chosen over traditional thermoset materials for their unique advantages, such as rapid fabrication, automated manufacturing and the ability …

Automation Of Post-Earthquake Civil Infrastructure Reconnaissance, Jack Bergquist

Architectural Engineering

Traditionally post-earthquake structural engineering reconnaissance consists of a team of experts who are deployed to the field to record and capture earthquake damage data, which is later uploaded into online repositories. Despite many advances to these data archives in recent years, the entries in online repositories often have limited metadata which make it difficult and time consuming to extract specific damage evidence that can be used for meaningful analysis. This report outlines the author’s contributions to overcoming these challenges via the development of a neural network that automatically filters and classifies post-earthquake civil infrastructure damage data after a seismic event. …

Young’S Modulus As A Measurement To Estimate Damage Related With Alkali-Silica Reaction In Concrete., Anazaria J. Ortega Gonzalez

Civil Engineering Undergraduate Honors Theses

The main purpose of this research is to compare two nondestructive methods to assess Alkali-Silica reaction (ASR) in concrete. Fifteen concrete prisms were cast using aggregates with different Alkali-Silica reactivity such as Jobe sand and Van Buren sand. The change in strain, shear wave velocity and Young’s modulus were determined according to ASTM C129 and ASTM C215, respectively. This data was collected by Dillon K Self, who determined that the shear wave velocity and strain are inversely proportional. However, when single cracking in the concrete specimen transition to map cracking, the shear wave velocity dropped significantly, whereas the strain value …

Quantification Of Uncertainties In Inline Inspection Data For Metal-Loss Corrosion On Energy Pipelines And Implications For Reliability Analysis, Tammeen Siraj

Electronic Thesis and Dissertation Repository

One of the major threats to the oil and gas transmission pipeline integrity is metal-loss corrosion. Pipeline operators periodically inspect the size of the metal loss corrosion in a pipeline using in-line inspection (ILI) tools to avoid pipe failure which may lead to severe consequences. To predict pipe failure efficiently, reliability-based corrosion management program is gaining popularity as it effectively incorporates all the uncertainties involved in the pipe failure prediction. The focus of the research reported in this thesis is to investigate the unaddressed issues in the reliability-based corrosion assessment to assist in better predicting pipe failure.

First, a methodology …

Flexural Rigidity Estimation Using Noisy Static Influence Lines, Yasha Hajizeinalibiouki

Civil and Environmental Engineering Theses and Dissertations

Society depends on critical infrastructure to support everyday activities. Even as critical components of civil infrastructure approach and exceed their design lives, demand on these structures continues to increase. In light of the need for managing aging infrastructure, several opportunities exist for research that can aid infrastructure managers in significant the challenge of detecting, classifying, and mitigating structural impairments. This dissertation presents a novel framework for impairment detection through the capture and utilization of deformation influence lines for flexural rigidity estimation on Euler-Bernoulli beams. In this research study, mechanical theory, a computer-vision algorithm, and multiple numerical methods are integrated to …

Eco-Efficient Preplaced Recycled Aggregate Concrete Incorporating Recycled Tire Waste Rubber Granules And Steel Wire Fibre Reinforcement, Saud A. Alfayez

Electronic Thesis and Dissertation Repository

With increasing world population and urbanization, the depletion of natural resources and generation of waste materials is becoming a considerable challenge. As the number of humans has exceeded 7 billion people, there are about 1.1 billion vehicles on the road, with 1.7 billion new tires produced and over 1 billion waste tires generated each year. In the USA, it was estimated in 2011 that 10% of scrap tires was being recycled into new products, and over 50% is being used for energy recovery, while the rest is being discarded into landfills or disposed. The proportion of tires disposed worldwide into …

Testing And Development Of Pre-Stressed Cfrp Retrofit Strategies For Controlling Fatigue Cracking In Steel Waterway Lock Gate Structures, Maggie Langston

Graduate Theses and Dissertations

Steel waterway lock gates across the national inland waterway transportation network are reaching and exceeding their intended service life, often experiencing component failures that lead to service interruptions. Unscheduled maintenance and repair of lock gates can be expensive and cause economic ripples throughout the entire inland waterway network. These lock gate component failures are often caused by fatigue cracking from repeated loading during operation. This thesis develops and tests a prestressed carbon fiber reinforced polymer (CFRP) fatigue retrofit for controlling fatigue demands within lock gate components. The study expands upon a recent analytical work by Lozano (2017) by experimentally investigating …

Non-Linear Deformation Analysis Of An Embankment Dam, Silas T. Sanderson

Civil and Environmental Engineering Master's Project Reports

Non-linear deformation analysis (NDA) of embankment dams is becoming more common as geotechnical engineers seek to better understand how critical infrastructure will perform under high seismic loading. In order to perform this type of analysis, site specific ground motions and engineering properties of the embankment dam are required. The NDA modeling effort consists of a static and seepage analysis to establish an initial stress state followed by a dynamic analysis to simulate the embankment response to ground motions. Using this approach, a two dimensional NDA was performed on an embankment dam using the NDA program FLAC. This report discusses the …

Microstructural Characterization Of Shear Transformation Zones And Modeling Indentation Size Effect In Amorphous Polymers, Leila Malekmotiei

LSU Doctoral Dissertations

The first aim of this work is developing a procedure for experimental and analytical characterization of nano-scale microstructures which mediate large scale deformation in amorphous polymers. Glassy polymers are extensively used as high impact resistant, low density, and clear materials in industries. Nevertheless, their response under severe loading conditions is yet to be appropriately unraveled. Due to the lack of long-range order in the microstructures of glassy solids, their plastic deformation is different from that in crystalline solids. Shear Transformation Zones (STZs) are believed to be the main plasticity carriers in amorphous solids and defined as the localized atomic or …

Structural Analysis Of The High Bay Steel Reaction Frames, Jerry Hue Truong Luong, Garrett Michael Brown

Architectural Engineering

No abstract provided.

An Integrated Decision Support Framework For Life-Cycle Building Asset Management, Maha Reda Alkasisbeh

Dissertations

Building assets are essential to the economic, cultural, and historical growth of any nation. Examples of buildings include shelters, entertainment facilities, living spaces, teaching facilities, civil offices, parking structures, police buildings, libraries, and service areas used to accommodate human activity. Deterioration of building assets, inadequate renewal budgets, climbing deficits, and increasing demand levels are difficulties that face owners when managing building assets. The role of asset management has recently become significant in municipal governments for strategic, operational, and financial reasons. The main functions of an asset management system include assessment of the current condition, prediction of future deterioration, asset prioritization, …

Risk Assessment Of Concrete Gravity Dams Under Earthquake Loads, Ufuk Sen

LSU Master's Theses

Dams are important structures to supply water for irrigation or drinking, to control flood, and to generate electricity. In seismic regions, the structural safety of concrete gravity dams is important due to the high potential of life and economic loss if they fail. Therefore, the seismic analysis of existing dams in seismically active regions is very crucial to predict responses of dams to ground motions. In this thesis, earthquake response of concrete gravity dams is investigated using the finite element (FE) method. The selected dam is the Pine Flat Dam which is located in the Central Valley of Fresno County, …

Flexural Behaviour Of Reinforced Concrete Elements Retrofitted Using External Unbonded Superelastic Shape Memory Alloy Bars, Yamen Ibrahim Elbahy

Electronic Thesis and Dissertation Repository

Steel reinforced concrete (RC) framed structures are seismically designed for safety, where the earthquake energy is dissipated through yielding of the steel bars. During strong earthquakes, high inelastic deformations are allowed to take place. This allowance results in significant residual deformations. Thus, following an earthquake, the structure might be deemed irreparable, requiring its demolishing and replacement. If the frame can be designed to regain its original shape following an earthquake, then the structure will be repairable. This kind of design can be achieved by using smart materials such as Shape Memory Alloys (SMAs).

SMAs have unique properties, which make them …

Evaluation Of Non-Composite Steel Girder Bridges Using Field Load Testing And A Calibrated Finite-Element Model, Mahmood J. Albraheemi

Electronic Theses and Dissertations

This research focuses on understanding the behavior of five, non-composite, simple-span steel girder bridges using field load testing and calibrated finite element models. These bridges were tested during the summer of 2016. Strains and selected displacements were measured at multiple locations during the field load tests. 3D finite-element (FE) models were created to simulate the actual response of these bridges with a novel approach to calibrate these models was developed that captures the observed full and partial composite action as well as rotational restraint of the girder ends. More accurate predictions of the bridges capacity were determined using field tests. …

Liquefaction-Induced Dragload And/Or Downdrag On Deep Foundations Within The New Madrid Seismic Zone, Ishimwe Elvis

Graduate Theses and Dissertations

Deep foundation elements are typically used to transfer structural loads for multi-story buildings and large-span bridges to a competent soil layer when 1) the soil close to the ground surface has no sufficient bearing capacity, and when 2) liquefiable soils are encountered. The majority of the bridges constructed within seismic zones rely upon the stability of earthen embankments and deep foundation that are installed above or within liquefiable soil deposits. Despite large factor of safety values or different load and resistance factors being used to adequately design deep foundations within seismic areas, soil liquefaction may cause extensive damage to the …

Effects Of Tension On Resonant Frequencies Of Strings, Blake Burnett

Senior Theses

This project tests and explores resonance of strings. Since all materials and mechanisms are affected by vibrations, it is important to know the frequencies at which resonance occurs. To explore this subject, strings were used as a model material to test the effect tension has on resonance. The fundamental frequencies and the corresponding modes of resonance were used to analyze the data. The results of this experiment show that increasing tension on a string increases its resonance frequency. Understanding the physics behind resonance frequency allows systems to be designed to take advantage of resonance properties, or to avoid resonance where …

Effects Of Short-Term Strains On Concrete Bulb-Tee Bridge Girders And Analysis Of The Practicality Of Using Three-Dimensional Models Based On Drone Imagery To Aid In Bridge Inspections, Justin M. Pace

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The University Transportation Center at Utah State University sponsors research through the Federal Highway Administration’s University Transportation Center Program. The purpose of this research is to advance technology and expertise in transportation-related fields. This includes research pertaining to bridge design, monitoring, and inspection (the focus of this research).

The first focus area of this research monitored short-term strains at the bottom of girders in a concrete bulb-tee girder bridge. The strains were caused by traffic loading and recorded using strain transducers attached to the bottom of each bridge girder. Patterns in the strain loading were monitored to draw conclusions about …

From Architectural Design To Structural Analysis: A Data-Driven Approach To Study Building Information Modeling (Bim) Interoperability, Mohammed Aldegeily

Masters Theses

BIM has been playing an essential role in building construction projects in recent years. It was used to automate many tasks such as clash detection, 4D planning, and quantity takeoff, among others. However, the interoperability of BIM still lacks in many fields across the architecture, engineering, and construction domains. This research studies the interoperability between architectural design and structural analysis. The goal is to explore structural analysis of BIM models through data transfer processes between different software platforms via three types of paths: (1) Application Programming Interface (API); (2) “immediately connect,” which is the direct link between software programs from …

Design And Probabilistic Analysis Of Mid- And High-Rise Wood Buildings Subjected To Earthquake Excitations, Shucheng Yang

Electronic Thesis and Dissertation Repository

Mass timber products, such as the glulam or cross laminated timber (CLT), are less frequently used construction materials at present for mid-rise and high-rise buildings. The feasibility and possible advantages of applying timber materials for constructing mid- and high-rise buildings are under investigation. One of the issues that needs to be addressed for the use of heavy timber materials is the safety of such constructions under seismic excitations. To address this issue, the nonlinear inelastic seismic responses and capacity curves of a wood buildings must be assessed. For this, the 10-, 15- and 20-storey buildings are designed using heavy timber …

Experimental And Numerical Investigation Of Emulative Connections In Precast Concrete Walls, Mohamed Gamal Elsayed

Electronic Thesis and Dissertation Repository

Grouted connections are widely used in the precast concrete construction. For instance, in precast concrete walls, they are used to connect assemblies of vertically stacked panels. The connection is comprised of a grout cylinder bound by a corrugated metallic duct, which is used to house a large diameter reinforcing bar bridging the horizontal gap of stacked panels. The connection is used to provide vertical continuity to the assembly, and to help resist tensile demands from in-plane bending. Current design guidelines consider such connections through a bar-in-concrete treatment, disregarding its composite nature and the confinement effect of the duct. This has …

Condition Assessment Of Concrete Bridge Decks Using Ground And Airborne Infrared Thermography, Tarek Omar

Electronic Thesis and Dissertation Repository

Applications of nondestructive testing (NDT) technologies have shown promise in assessing the condition of existing concrete bridges. Infrared thermography (IRT) has gradually gained wider acceptance as a NDT and evaluation tool in the civil engineering field. The high capability of IRT in detecting subsurface delamination, commercial availability of infrared cameras, lower cost compared with other technologies, speed of data collection, and remote sensing are some of the expected benefits of applying this technique in bridge deck inspection practices. The research conducted in this thesis aims at developing a rational condition assessment system for concrete bridge decks based on IRT technology, …