Engineering Commons^™

Nano-Scale Investigation Of Mechanical Characteristics Of Main Phases Of Hydrated Cement Paste, Shahin Hajilar

Masters Theses

Hydrated cement paste (HCP), which is present in various cement-based materials, includes a number of constituents with distinct nano-structures. The elastic properties of the HCP crystals are calculated using molecular dynamics (MD) methods. The accuracy of estimated values is verified by comparing them with the results from experimental tests and other atomistic simulation methods. The outcome of MD simulations is then extended to predict the elastic properties of the C-S-H gel by rescaling the values calculated for the individual crystals. To take into account the contribution of porosity, a detailed microporomechanics study is conducted on low- and high-density types of …

Measuring The Resilience Of Transportation Networks Subject To Seismic Risk, Mark N. Furtado

Masters Theses

Transportation networks are critical to the function of modern society but they are vulnerable to extreme events such as earthquakes. Damaged bridges can cost millions of dollars to repair and congestion and detours due to bridge closures leads to indirect costs that are even greater than the cost of repair of damaged bridges. A resilient network however should be able to limit the damage caused by earthquakes and recover in a timely fashion. Resilience of networks has been studying in length from a conceptual standpoint but as quantitative measure, the field has been lacking. This study sets forth to quantify …

Life-Cycle Cost Analysis Of Reinforced Concrete Bridges Rehabilitated With Cfrp, Jeffrey L. Smith

Theses and Dissertations--Civil Engineering

The deterioration of highway bridges and structures and the cost of repairing, rehabilitating, or replacing deteriorated structures is a major issue for bridge owners. An aging infrastructure as well as the need to upgrade structural capacity for heavier trucks adds to problem. Life-cycle cost analysis (LCCA) is a useful tool for determining when the deployment of fiber-reinforced polymer (FRP) composite components is an economically viable alternative for rehabilitating deteriorated concrete bridges.

The use of LCCA in bridge design and rehabilitation has been limited. The use of LCCA for bridges on a project level basis has often been limited to the …

Damage Detection Methodologies For Structural Health Monitoring Of Thin-Walled Pressure Vessels, Arturo Modesto

Electronic Theses and Dissertations

There is a need in exploring structural health monitoring technologies for the composite structures particularly aged Composite Overwrapped Pressure Vessels (COPVs) for the current and future implementation of COPVs for space missions. In this study, the research was conducted in collaboration with NASA Kennedy Space Center and also NASA Marshall Space and Flight Center engineers. COPVs have been used to store inert gases like helium (for propulsion) and nitrogen (for life support) under varying degrees of pressure onboard the orbiter since the beginning of the Space Shuttle Program. After the Columbia accident, the COPVs were re-examined and different studies (e.g. …

Evaluation Of Strength And Hydraulic Properties Of Buried Pipe Systems Used For Stormwater Harvesting, Mario Samson Mena

Electronic Theses and Dissertations

Water scarcity has been identified as a global issue. Both water harvesting and an efficient water piping system are some of the important factors to meet the water demand. In this study, high-density polyethylene (HDPE) pipes used as an underground storage was evaluated and a Microsoft EXCEL based model was developed, called PIPE-R Model. To study the structural integrity of the pipes, laboratory and field testing were conducted. For the water harvesting, UCF Stormwater Management Academy designed an EXCEL based model to simulate the system's performance to store and redistribute water for an average year. The purpose of PIPE-R Model …

Effect Of Lateral Stiffness On Bridge Deck Performance, Andrea Del Pilar Toro

UNF Graduate Theses and Dissertations

The use of the empirical deck design method has increased its acceptance due to the economic advantages that it presents when compared to its counterpart, the traditional method. This can be attributed to the fact that the empirical method provides an appropriate design where the deck withstands stress not only due to the steel reinforcement but to an implicit arching membrane stress set-up as an effect of the lateral restraint surrounding the deck slab known as Compressive Membrane Action (CMA).

It has been proved through research that most design codes underestimate the strength of laterally restrained slabs. However, there is …

Deformation-Based Excavation Support System Design Method, Sekyi K. Intsiful

Theses and Dissertations--Civil Engineering

Development in urban areas around the world has steadily increased in recent years. This rapid development has not been matched by the ever decreasing open space commonly associated with urban centers. Vertical construction, thus, lends itself a very useful solution to this problem. Deep excavation is often required for urban construction. Unfortunately, the ground movements associated with deep excavation can result in damage to adjacent buildings. Thus, it is critically important to accurately predict the damage potential of nearby deep excavations and designing adequate support systems.

A new design method is proposed, as an attempt, to address the problem. The …

Vibration Of Steel-Framed Floors Supporting Sensitive Equipment In Hospitals, Research Facilities, And Manufacturing Facilities, Di Liu

Theses and Dissertations--Civil Engineering

Floors have traditionally been designed only for strength and deflection serviceability. As technological advances have been made in medical, scientific and micro-electronics manufacturing, many types of equipment have become sensitive to vibration of the supporting floor. Thus, vibration serviceability has become a routinely evaluated limit state for floors supporting sensitive equipment. Equipment vibration tolerance limits are sometimes expressed as waveform peak acceleration, and are more often expressed as narrowband spectral acceleration, or one-third octave spectral velocity.

Current floor vibration prediction methods, such as those found in the American Institute of Steel Construction Design Guide 11, Floor Vibrations Due to Human …

Estudio A Nivel Colombia De La Influencia Del Aditivo Better Mix En Estado Fresco, Semi Endurecido Y Endurecido Del Concreto Estructural, Lizeth Catalina Ocampo Herrera, Fabio Andrés Macías Pedreros

Ingeniería Civil

No abstract provided.

Parametric Study Of Self-Centering Concentrically-Braced Frames In Response To Earthquakes, Nicholas F. Roth

Williams Honors College, Honors Research Projects

This research project consisted of the use of computer aided numerical software to test the response of an earthquake resistance system within various buildings when exposed to various design-level earthquakes. This research project is an extension of an existing NSF research project. The relevant questions and investigations of this and the greater project surround the performance of an earthquake resistance system with the intentions of better understanding its abilities and limitations. This project has been aided by Dr. David Roke, the faculty sponsor, in order to perform the research and collect, organize, and analyze the data. This research was performed …

Characterisation And Applications Of Iron Ore Tailings In Building And Construction Projects, Francis Atta Kuranchie

Theses: Doctorates and Masters

The mine tailings are generated as the wastes worldwide as a result of exploration, excavation, blasting, beneficiation and extraction of mineral ores. In Western Australia, due to the extensive mining activities and increasing low grade ores, there is generation of mine tailings in large quantities, which could lead to environmental and disposal problems. The common practice of handling the tailings are to store them in tailing dams or as stockpiles near mine sites. Limited quantities are sometimes used as backfills and other applications. The utilisation of tailings in building and construction projects, which may consume a large volume of wastes, …

Shape Memory Behavior Of Single Crystal And Polycrystalline Ni-Rich Nitihf High Temperature Shape Memory Alloys, Sayed M. Saghaian

Theses and Dissertations--Mechanical Engineering

NiTiHf shape memory alloys have been receiving considerable attention for high temperature and high strength applications since they could have transformation temperatures above 100 °C, shape memory effect under high stress (above 500 MPa) and superelasticity at high temperatures. Moreover, their shape memory properties can be tailored by microstructural engineering. However, NiTiHf alloys have some drawbacks such as low ductility and high work hardening in stress induced martensite transformation region. In order to overcome these limitations, studies have been focused on microstructural engineering by aging, alloying and processing.

Shape memory properties and microstructure of four Ni-rich NiTiHf alloys (Ni50.3Ti29.7Hf20, Ni50.7Ti29.3Hf20, …