Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 30 of 35

Full-Text Articles in Engineering

Study On Performance Evaluation Of Co2 Heat Pump System Integrated With Thermal Energy Storage For Space Heating, Zhihua Wang, Yuxin Zheng, Fenghao Wang, Mengjie Song, Zhenjun Ma Jan 2019

Study On Performance Evaluation Of Co2 Heat Pump System Integrated With Thermal Energy Storage For Space Heating, Zhihua Wang, Yuxin Zheng, Fenghao Wang, Mengjie Song, Zhenjun Ma

Faculty of Engineering and Information Sciences - Papers: Part B

CO2 heat pumps have drawn a great deal of attention owing to their advantages of high efficiency and environmental friendly for heating water under low ambient temperature. However, the system performance is not desirable and shows a lower COP for space heating, especially for a radiator as heating terminal, due to the higher inlet water temperature at the gas cooler, which causes a large throttle loss when the refrigerant flow through the throttling device. To tackle this issue, a transcritical CO2 heat pump system integrated with thermal energy storage (TES) systems was developed in this paper. The heating performance of …


A Novel Empirical Heat Transfer Model For A Solar Thermal Storage Process Using Phase Change Materials, Yu Bie, Ming Li, Fei Chen, Grzegorz Krolczyk, Lin Yang, Zhixiong Li, Weihua Li Jan 2019

A Novel Empirical Heat Transfer Model For A Solar Thermal Storage Process Using Phase Change Materials, Yu Bie, Ming Li, Fei Chen, Grzegorz Krolczyk, Lin Yang, Zhixiong Li, Weihua Li

Faculty of Engineering and Information Sciences - Papers: Part B

Numerical and experimental analyses are often used to evaluate the solar thermal system with latent heat thermal energy storage (LHTES). However, the relationship between the numerical simulation and actual heat transfer process is still unclear. This work compares the simulated average temperature of two different phase change materials (PCMs) with experimental result at different operation conditions for the purpose of developing a temperature correction model. A novel empirical heat transfer model is then established to improve the simulation accuracy of PCM-based solar thermal systems. The contributions of this work include that (1) the system performance could be evaluated by the …


Economic Operation Optimization Of Battery Energy Storage Systems In A Solar Rich Microgrid, Herath Pathiranage Asanga Priyankara Jayawardana, Massimo Fiorentini, Duane A. Robinson, Ashish P. Agalgaonkar Jan 2018

Economic Operation Optimization Of Battery Energy Storage Systems In A Solar Rich Microgrid, Herath Pathiranage Asanga Priyankara Jayawardana, Massimo Fiorentini, Duane A. Robinson, Ashish P. Agalgaonkar

Faculty of Engineering and Information Sciences - Papers: Part B

The increasing trend of connecting local distributed generation units to the grid has unlocked new economic opportunities for owners. This is supported by the ongoing development of energy storage technologies, especially battery based systems. In practice, battery storage systems typically operate based on control algorithms where tariff structures and future generation and load profiles are not taken into account. This paper investigates the results of a case study for a microgrid using a proposed optimization model which minimizes cost by considering an import/export tariff structure. The effect of changing time resolution related to variations in demand and generation is examined, …


Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis Jan 2017

Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper a novel microencapsulated phase change material (MF-3) has been developed and tested for solar assisted hot water storage systems. Even though the morphology of the sample was affected by the type of emulsifier used for fabrication it recorded the highest energy storage capacity of 126 kJ/kg with encapsulation efficiency of 97.4% as compared with other developed samples. For the purpose of assessing its thermal effectiveness it was theoretically evaluated in a compacted fixed bed TES unit and found to be capable of achieving a higher energy storage density as well as relatively smaller physical storage size than …


Hybrid Model Predictive Control Of A Residential Hvac System With On-Site Thermal Energy Generation And Storage, Massimo Fiorentini, Josh Wall, Zhenjun Ma, Julio H. Braslavsky, Paul Cooper Jan 2017

Hybrid Model Predictive Control Of A Residential Hvac System With On-Site Thermal Energy Generation And Storage, Massimo Fiorentini, Josh Wall, Zhenjun Ma, Julio H. Braslavsky, Paul Cooper

Faculty of Engineering and Information Sciences - Papers: Part A

This paper describes the development, implementation and experimental investigation of a Hybrid Model Predictive Control (HMPC) strategy to control solar-assisted heating, ventilation and air-conditioning (HVAC) systems with on-site thermal energy generation and storage. A comprehensive approach to the thermal energy management of a residential building is presented to optimise the scheduling of the available thermal energy resources to meet a comfort objective. The system has a hybrid nature with both continuous variables and discrete, logic-driven operating modes. The proposed control strategy is organized in two hierarchical levels. At the high-level, an HMPC controller with a 24-h prediction horizon and a …


Construction Of Sno2-Graphene Composite With Half-Supported Cluster Structure As Anode Toward Superior Lithium Storage Properties, Chengling Zhu, Zhixin Chen, Shenmin Zhu, Yao Li, Hui Pan, Xin Meng, Muhammad Imtiaz, Di Zhang Jan 2017

Construction Of Sno2-Graphene Composite With Half-Supported Cluster Structure As Anode Toward Superior Lithium Storage Properties, Chengling Zhu, Zhixin Chen, Shenmin Zhu, Yao Li, Hui Pan, Xin Meng, Muhammad Imtiaz, Di Zhang

Faculty of Engineering and Information Sciences - Papers: Part B

Inspired by nature, herein we designed a novel construction of SnO2 anodes with an extremely high lithium storage performance. By utilizing small sheets of graphene oxide, the partitioned-pomegranate-like structure was constructed (SnO2@C@half-rGO), in which the porous clusters of SnO2 nanoparticles are partially supported by reduced graphene oxide sheets while the rest part is exposed (half-supported), like partitioned pomegranates. When served as anode for lithium-ion batteries, SnO2@C@half-rGO exhibited considerably high specific capacity (1034.5 mAh g−1 after 200 cycles at 100 mA g−1), superior rate performance and remarkable durability (370.3 mAh g−1 …


Preparation Of Microencapsulated Phase Change Materials (Mepcm) For Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis, Tongyu Zhou, Yilin Li Jan 2017

Preparation Of Microencapsulated Phase Change Materials (Mepcm) For Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis, Tongyu Zhou, Yilin Li

Faculty of Engineering and Information Sciences - Papers: Part B

Microencapsulated phase change materials (MEPCM) could be used for energy saving applications in buildings due to their relatively high energy storage capacities at constant temperature, which could passively reduce peak cooling loads in summer. In this study, poly(methyl methacrylate-co-methacrylic acid) (PMMA-MAA) was used as a shell material to fabricate MEPCM by crosslinking methyl methacrylate (MMA) and methacrylic acid (MAA) through in-situ suspension-like polymerization method. The effects of initiator weight percentage and the ratio of shell monomers for the preparation of MEPCM were also investigated. The experimental results showed that the best MEPCM sample was achieved with a shell monomer weight …


A Consumer-Oriented Decision-Making Approach For Selecting The Cloud Storage Service: From Paprika Perspective, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He Jan 2017

A Consumer-Oriented Decision-Making Approach For Selecting The Cloud Storage Service: From Paprika Perspective, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He

Faculty of Engineering and Information Sciences - Papers: Part B

In recent years there is a growth in the number of companies that offers cloud storage solutions. From user’s perspectives, it is becoming a challenging task to choose which cloud storage to use and from whom, based on user’s needs. In this context, no framework can evaluate the decision criteria for selection of cloud storage services. This paper proposes a solution to this problem by identifying the cloud storage criteria and introduces the PAPRIKA approach for measuring the criteria of cloud storage based on client’s preference. This work demonstrated the applicability of the framework (decision model) by testing it with …


Identity-Based Remote Data Integrity Checking With Perfect Data Privacy Preserving For Cloud Storage, Yong Yu, Man Ho Au, Giuseppe Ateniese, Xinyi Huang, Willy Susilo, Yuanshun Dai, Geyong Min Jan 2017

Identity-Based Remote Data Integrity Checking With Perfect Data Privacy Preserving For Cloud Storage, Yong Yu, Man Ho Au, Giuseppe Ateniese, Xinyi Huang, Willy Susilo, Yuanshun Dai, Geyong Min

Faculty of Engineering and Information Sciences - Papers: Part A

Remote data integrity checking (RDIC) enables a data storage server, say a cloud server, to prove to a verifier that it is actually storing a data owner's data honestly. To date, a number of RDIC protocols have been proposed in the literature. However, most of the constructions suffer from the issue of requiring complex key management. That is, they rely on the expensive public key infrastructure (PKI), which might hinder the deployment of RDIC in practice. In this paper, we propose a new construction of identity-based (ID-based) RDIC protocol by making use of key-homomorphic cryptographic primitive to reduce the system …


Dynamic Exergy Analysis For The Thermal Storage Optimization Of The Building Envelope, Valentina Bonetti, Georgios Kokogiannakis Jan 2017

Dynamic Exergy Analysis For The Thermal Storage Optimization Of The Building Envelope, Valentina Bonetti, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

As a measure of energy "quality", exergy is meaningful for comparing the potential for thermal storage. Systems containing the same amount of energy could have considerably different capabilities in matching a demand profile, and exergy measures this difference. Exergy stored in the envelope of buildings is central in sustainability because the environment could be an unlimited source of energy if its interaction with the envelope is optimised for maintaining the indoor conditions within comfort ranges. Since the occurring phenomena are highly fluctuating, a dynamic exergy analysis is required; however, dynamic exergy modelling is complex and has not hitherto been implemented …


Simulation Of The Melting Process Of Ice Slurry For Energy Storage Using A Two-Fluid Lattice Boltzmann Method, Qi Lin, Shugang Wang, Zhenjun Ma, Jihong Wang, Tengfei Zhang Jan 2017

Simulation Of The Melting Process Of Ice Slurry For Energy Storage Using A Two-Fluid Lattice Boltzmann Method, Qi Lin, Shugang Wang, Zhenjun Ma, Jihong Wang, Tengfei Zhang

Faculty of Engineering and Information Sciences - Papers: Part B

Ice slurry can be used as the thermal storage media in latent cool storage systems for both residential and commercial buildings. This paper presents the investigation of the phase change characteristics of the ice slurry using a two-fluid Lattice Boltzmann Method (TFLBM). The melting and migration processes of the ice slurry are simulated by improving the equilibrium distribution function and matching the relevant parameters such as the kinetic viscosity of ice particle cluster and cross-collision coefficient. The sensitivity analysis of the ice slurry viscosity and cross-collision coefficient are achieved through six numerical experiments, and the ice melting in the internal-melt …


Two-Factor Data Security Protection Mechanism For Cloud Storage System, Joseph K. Liu, Kaitai Liang, Willy Susilo, Jianghua Liu, Yang Xiang Jan 2016

Two-Factor Data Security Protection Mechanism For Cloud Storage System, Joseph K. Liu, Kaitai Liang, Willy Susilo, Jianghua Liu, Yang Xiang

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper, we propose a two-factor data security protection mechanism with factor revocability for cloud storage system. Our system allows a sender to send an encrypted message to a receiver through a cloud storage server. The sender only needs to know the identity of the receiver but no other information (such as its public key or its certificate). The receiver needs to possess two things in order to decrypt the ciphertext. The first thing is his/her secret key stored in the computer. The second thing is a unique personal security device which connects to the computer. It is impossible …


Learning Network Storage Curriculum With Experimental Case Based On Embedded Systems, Qingguo Zhou, Jiong Wu, Ting Wu, Jun Shen, Rui Zhou Jan 2016

Learning Network Storage Curriculum With Experimental Case Based On Embedded Systems, Qingguo Zhou, Jiong Wu, Ting Wu, Jun Shen, Rui Zhou

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper, we present an experimental case for the course of "Network Storage and Security," which benefited from an improved learning outcome for our students. The newly designed experiments-based contents are merged into the current course to help students obtain practical experiences about network storage. The experiments aim to build a network storage system based on available resources instead of any specialized network storage equipment. Technically, students can learn general practical knowledge of network storage on iSCSI (a network storage protocol based on IP technology) and also the technologies of embedded system. Through the experimental case, we found that …


A Review Of Topologies Of Three-Port Dc-Dc Converters For The Integration Of Renewable Energy And Energy Storage System, Neng Zhang, Danny Sutanto, Kashem M. Muttaqi Jan 2016

A Review Of Topologies Of Three-Port Dc-Dc Converters For The Integration Of Renewable Energy And Energy Storage System, Neng Zhang, Danny Sutanto, Kashem M. Muttaqi

Faculty of Engineering and Information Sciences - Papers: Part A

The application of renewable energy such as solar photovoltaic (PV), wind and fuel cells is becoming increasingly popular because of the environmental awareness and advances in technology coupled with decreasing manufacturing cost. Power electronic converters are usually used to convert the power from the renewable sources to match the load demand and grid requirement to improve the dynamic and steady-state characteristics of these green generation systems, to provide the maximum power point tracking (MPPT) control, and to integrate the energy storage system to solve the challenge of the intermittent nature of the renewable energy and the unpredictability of the load …


Development And Optimization Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma Jan 2015

Development And Optimization Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma

Faculty of Engineering and Information Sciences - Papers: Part A

This paper describes a novel solar-assisted HVAC system developed for the Team UOW 'Illawarra Flame' Solar Decathlon house, the winner of the Solar Decathlon China 2013 competition. This HVAC system consists of an air-based photovoltaic-thermal (PVT) collector and a phase change material (PCM) thermal storage unit integrated with a reverse cycle heat pump, in a ducted system. The system was designed for operation during both winter and summer using daytime solar radiation and night-time sky radiative cooling, respectively. The PVT collector heats or cools fresh air from ambient and thereby provides heating or cooling either directly to the indoor space, …


Experimental Investigation Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma, Josh Wall Jan 2015

Experimental Investigation Of An Innovative Hvac System With Integrated Pvt And Pcm Thermal Storage For A Net-Zero Energy Retrofitted House, Massimo Fiorentini, Paul Cooper, Zhenjun Ma, Josh Wall

Faculty of Engineering and Information Sciences - Papers: Part A

This paper presents the experimental investigation of a novel solar assisted HVAC system developed for the Team UOW Solar Decathlon house, the overall winner of the Solar Decathlon China 2013 competition. This novel HVAC system consists of an air based photovoltaic-thermal (PVT) system and a phase change material (PCM) thermal storage unit integrated with a ducted system with a reverse-cycle heat pump. The system has been designed for operation during both winter and summer, using daytime solar radiation and night sky radiative cooling to increase the energy efficiency of the air-conditioning system. The PVT system can exchange heat with the …


Community Energy Storage For Neutral Voltage Rise Mitigation In Four-Wire Multigrounded Lv Feeders With Unbalanced Solar Pv Allocation, Md Jan E Alam, Kashem M. Muttaqi, Danny Sutanto Jan 2015

Community Energy Storage For Neutral Voltage Rise Mitigation In Four-Wire Multigrounded Lv Feeders With Unbalanced Solar Pv Allocation, Md Jan E Alam, Kashem M. Muttaqi, Danny Sutanto

Faculty of Engineering and Information Sciences - Papers: Part A

The traditional neutral voltage problem in low-voltage (LV) four-wire multigrounded distribution networks can be aggravated due to an unbalanced allocation of one-phase photovoltaic (PV) units. Inherent limitations restrict the performance of the traditional strategies to mitigate the combined effect of load and PV unbalance. To overcome the shortcoming of traditional approaches, a new dynamic mitigation approach using community energy storage (CES) is proposed in this paper. A power balancing algorithm is developed to perform the balancing operation while minimizing power drawn from the CES. A charge/discharge control strategy is developed that will continuously balance and dynamically adjust the power exchange …


Alleviation Of Neutral-To-Ground Potential Rise Under Unbalanced Allocation Of Rooftop Pv Using Distributed Energy Storage, Md Jan E Alam, Kashem M. Muttaqi, Danny Sutanto Jan 2015

Alleviation Of Neutral-To-Ground Potential Rise Under Unbalanced Allocation Of Rooftop Pv Using Distributed Energy Storage, Md Jan E Alam, Kashem M. Muttaqi, Danny Sutanto

Faculty of Engineering and Information Sciences - Papers: Part A

A high penetration of one-phase rooftop solar photovoltaic (PV) units with unbalanced allocation can create considerable neutral current and neutral potential rise in low voltage (LV) four-wire multigrounded distribution networks, even with balanced loads. Because of the limitations of traditional strategies to mitigate the combined effect of load and PV unbalance, this paper proposes the use of distributed energy storage to reduce the neutral current and neutral potential under a high penetration of unbalanced rooftop solar PV allocation. A power-balancing algorithm based on charge/discharge control is developed to continuously adjust the power exchange with the grid to mitigate the neutral …


Searchable Atribute-Based Mechanism With Efficiient Data Sharing For Secure Cloud Storage, Kaitai Liang, Willy Susilo Jan 2015

Searchable Atribute-Based Mechanism With Efficiient Data Sharing For Secure Cloud Storage, Kaitai Liang, Willy Susilo

Faculty of Engineering and Information Sciences - Papers: Part A

To date, the growth of electronic personal data leads to a trend that data owners prefer to remotely outsource their data to clouds for the enjoyment of the high-quality retrieval and storage service without worrying the burden of local data management and maintenance. However, secure share and search for the outsourced data is a formidable task, which may easily incur the leakage of sensitive personal information. Efficient data sharing and searching with security is of critical importance. This paper, for the first time, proposes a searchable attribute-based proxy re-encryption system. When compared to existing systems only supporting either searchable attribute-based …


Facile Synthesis Of Coaxial Cnts/Mnox-Carbon Hybrid Nanofibers And Their Greatly Enhanced Lithium Storage Performance, Zunxian Yang, Jun Lv, Haidong Pang, Wenhuan Yan, Kun Qian, Tailiang Guo, Zaiping Guo Jan 2015

Facile Synthesis Of Coaxial Cnts/Mnox-Carbon Hybrid Nanofibers And Their Greatly Enhanced Lithium Storage Performance, Zunxian Yang, Jun Lv, Haidong Pang, Wenhuan Yan, Kun Qian, Tailiang Guo, Zaiping Guo

Faculty of Engineering and Information Sciences - Papers: Part A

Carbon nanotubes (CNTs)/MnOx-Carbon hybrid nanofibers have been successfully synthesized by the combination of a liquid chemical redox reaction (LCRR) and a subsequent carbonization heat treatment. The nanostructures exhibit a unique one-dimensional core/shell architecture, with one-dimensional CNTs encapsulated inside and a MnOx-carbon composite nanoparticle layer on the outside. The particular porous characteristics with many meso/micro holes/pores, the highly conductive one-dimensional CNT core, as well as the encapsulating carbon matrix on the outside of the MnOx nanoparticles, lead to excellent electrochemical performance of the electrode. The CNTs/MnOx-Carbon hybrid nanofibers exhibit a high initial reversible capacity of …


Identity-Based Secure Distributed Data Storage Schemes, Jinguang Han, Willy Susilo, Yi Mu Jan 2014

Identity-Based Secure Distributed Data Storage Schemes, Jinguang Han, Willy Susilo, Yi Mu

Faculty of Engineering and Information Sciences - Papers: Part A

Secure distributed data storage can shift the burden of maintaining a large number of files from the owner to proxy servers. Proxy servers can convert encrypted files for the owner to encrypted files for the receiver without the necessity of knowing the content of the original files. In practice, the original files will be removed by the owner for the sake of space efficiency. Hence, the issues on confidentiality and integrity of the outsourced data must be addressed carefully. In this paper, we propose two identity-based secure distributed data storage (IBSDDS) schemes. Our schemes can capture the following properties: (1) …


Development Of High Melting Temperature Microencapsulated Phase Change Material For Compacted Thermal Energy Storage Bed, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis Jan 2014

Development Of High Melting Temperature Microencapsulated Phase Change Material For Compacted Thermal Energy Storage Bed, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper a novel high temperature microencapsulated phase change material (MEPCM) based on paraffin as the core material and MF resin as the shell material has been developed with the in-situ polymerization method for solar hot water storage application. The results showed that the type of emulsifier could influence core material content, the encapsulation efficiency as well as the latent heat capacity. Based on the results and analysis the study has shown that energy storage density could be increased by as much as 59% if 60wt% of MEPCM 1 was to be used in the proposed compacted MEPCM-water bed …


On The Security Of Auditing Mechanisms For Secure Cloud Storage, Yong Yu, Lei Niu, Guomin Yang, Yi Mu, Willy Susilo Jan 2014

On The Security Of Auditing Mechanisms For Secure Cloud Storage, Yong Yu, Lei Niu, Guomin Yang, Yi Mu, Willy Susilo

Faculty of Engineering and Information Sciences - Papers: Part A

Cloud computing is a novel computing model that enables convenient and on-demand access to a shared pool of configurable computing resources. Auditing services are highly essential to make sure that the data is correctly hosted in the cloud. In this paper, we investigate the active adversary attacks in three auditing mechanisms for shared data in the cloud, including two identity privacy-preserving auditing mechanisms called Oruta and Knox, and a distributed storage integrity auditing mechanism. We show that these schemes become insecure when active adversaries are involved in the cloud storage. Specifically, an active adversary can arbitrarily alter the cloud data …


Enhanced Privacy Of A Remote Data Integrity-Checking Protocol For Secure Cloud Storage, Yong Yu, Man Ho Au, Yi Mu, S Tang, J Ren, Willy Susilo, Liju Dong Jan 2014

Enhanced Privacy Of A Remote Data Integrity-Checking Protocol For Secure Cloud Storage, Yong Yu, Man Ho Au, Yi Mu, S Tang, J Ren, Willy Susilo, Liju Dong

Faculty of Engineering and Information Sciences - Papers: Part A

Remote data integrity checking (RDIC) enables a server to prove to an auditor the integrity of a stored file. It is a useful technology for remote storage such as cloud storage. The auditor could be a party other than the data owner; hence, an RDIC proof is based usually on publicly available information. To capture the need of data privacy against an untrusted auditor, Hao et al. formally defined "privacy against third party verifiers" as one of the security requirements and proposed a protocol satisfying this definition. However, we observe that all existing protocols with public verifiability supporting data update, …


A Novel Approach For Ramp-Rate Control Of Solar Pv Using Energy Storage To Mitigate Output Fluctuations Caused By Cloud Passing, M J. E Alam, K M. Muttaqi, D Sutanto Jan 2014

A Novel Approach For Ramp-Rate Control Of Solar Pv Using Energy Storage To Mitigate Output Fluctuations Caused By Cloud Passing, M J. E Alam, K M. Muttaqi, D Sutanto

Faculty of Engineering and Information Sciences - Papers: Part A

The variability of solar irradiance with a high ramp-rate, caused by cloud passing, can create fluctuation in the PV output. In a weak distribution grid with a high PV penetration, this can create significant voltage fluctuations. Energy storage devices are used to smooth out the fluctuation using traditional moving average control. However, moving average does not control the ramp-rate directly; rather the ramp-rate depends on previous values of PV output. This paper proposes a strategy where the ramp-rate of PV panel output is used to control the PV inverter ramp-rate to a desired level by deploying energy storage (which can …


Solar Pv And Battery Storage Integration Using A New Configuration Of A Three-Level Npc Inverter With Advanced Control Strategy, Hamid Teymour Ghasemabadi, Danny Soetanto, Kashem M. Muttaqi, Philip Ciufo Jan 2014

Solar Pv And Battery Storage Integration Using A New Configuration Of A Three-Level Npc Inverter With Advanced Control Strategy, Hamid Teymour Ghasemabadi, Danny Soetanto, Kashem M. Muttaqi, Philip Ciufo

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper, a novel configuration of a three-level neutral-point-clamped (NPC) inverter that can integrate solar photovoltaic (PV) with battery storage in a grid-connected system is proposed. The strength of the proposed topology lies in a novel, extended unbalance three-level vector modulation technique that can generate the correct ac voltage under unbalanced dc voltage conditions. This paper presents the design philosophy of the proposed configuration and the theoretical framework of the proposed modulation technique. A new control algorithm for the proposed system is also presented in order to control the power delivery between the solar PV, battery, and grid, which …


Additive-Free Synthesis Of 3d Porous V2o5 Hierarchical Microspheres With Enhanced Lithium Storage Properties, Chaofeng Zhang, Zhixin Chen, Zaiping Guo, Xiong Wen Lou Jan 2013

Additive-Free Synthesis Of 3d Porous V2o5 Hierarchical Microspheres With Enhanced Lithium Storage Properties, Chaofeng Zhang, Zhixin Chen, Zaiping Guo, Xiong Wen Lou

Faculty of Engineering and Information Sciences - Papers: Part A

A facile synthesis of novel 3D porous V2O5 hierarchical microspheres has been developed, based on an additive-free solvothermal method and subsequent calcination. Due to their unique structure, these V2O5 microspheres display a very stable capacity retention of 130 mA h g (1) over 100 cycles at a current rate of 0.5 C, and show excellent rate capability with a capacity of 105 mA h g (1) even at the 30 C rate. The good electrochemical performance suggests that this unique hierarchical V2O5 material could be a promising candidate as a cathode material for lithium-ion batteries.


The Influence Of Pallets On The Behaviour And Design Of Drive-In Steel Storage Racks - Part I: Behaviour, B P. Gilbert, L H. Teh, R X. Badet, K J. R Rasmussen Jan 2013

The Influence Of Pallets On The Behaviour And Design Of Drive-In Steel Storage Racks - Part I: Behaviour, B P. Gilbert, L H. Teh, R X. Badet, K J. R Rasmussen

Faculty of Engineering and Information Sciences - Papers: Part A

Drive-in steel storage racks represent a popular alternative to the more common selective racks when available space is restricted or when storing the same good. In drive-in racks, the forklift truck drives into the rack and stores the pallets on beam rails on the "first-in last-out" principle. Recent experimental studies have shown that by acting as horizontal ties between uprights, pallets significantly influence the structural behaviour of the rack. However, due to the uncertainty in the degree of friction between the rail beams and the pallets, current industry design practice does not consider this effect. This paper quantifies the influence …


Mitigation Of Rooftop Solar Pv Impacts And Evening Peak Support By Managing Available Capacity Of Distributed Energy Storage Systems, Md Jan-E- Alam, Kashem Muttaqi, Darmawan Soetanto Jan 2013

Mitigation Of Rooftop Solar Pv Impacts And Evening Peak Support By Managing Available Capacity Of Distributed Energy Storage Systems, Md Jan-E- Alam, Kashem Muttaqi, Darmawan Soetanto

Faculty of Engineering and Information Sciences - Papers: Part A

A high penetration of rooftop solar photovoltaic (PV) resources into low-voltage (LV) distribution networks creates reverse power-flow and voltage-rise problems. This generally occurs when the generation from PV resources substantially exceeds the load demand during high insolation period. This paper has investigated the solar PV impacts and developed a mitigation strategy by an effective use of distributed energy storage systems integrated with solar PV units in LV networks. The storage is used to consume surplus solar PV power locally during PV peak, and the stored energy is utilized in the evening for the peak-load support. A charging/discharging control strategy is …


The Influence Of Pallets On The Behaviour And Design Of Steel Drive-In Storage Racks - Part Ii Design, B P. Gilbert, L H. Teh, R X. Badet, K J. R Rasmussen Jan 2013

The Influence Of Pallets On The Behaviour And Design Of Steel Drive-In Storage Racks - Part Ii Design, B P. Gilbert, L H. Teh, R X. Badet, K J. R Rasmussen

Faculty of Engineering and Information Sciences - Papers: Part A

This paper analyses the influence of the horizontal restraints provided by pallets on the ultimate capacity of drive-in racks. The paper is based on the assumption that one can accurately determine the coefficient of friction between the rail beams and the pallets or can design a device that restrains the pallets from sliding on the rail beams. Thirty-six drive-in racks representing the global sale of an Australian manufacturer over three years are analysed for all possible loading scenarios. For the sake of computational efficiency, the simple 2D model introduced in the companion paper is used for the study. The load …