Engineering Commons^™

Inspection Planning Of Subsea Pipeline Using Risk-Based Inspection, Ni Luh Triska Adelia, Badrul Munir, Johny Wahyuadi Soedarsono

Journal of Materials Exploration and Findings

Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the …

Maintenance Notes To Improve The Reliability Of Wheel Flange Failure For Overhead Crane, Fakhri Burhanuddin, Akhmad Herman Yuwono

Journal of Materials Exploration and Findings

Overhead traveling cranes in the industry have utility workload classifications and require high standards of safety and reliability by mobilizing lifting and transporting capacity variants of steel products, equipment, and other supports. The crane wheels are the main support in moving the end carriage so that the crane can work according to its function. Failures in the operation and maintenance cycle have occurred. Therefore, proper repair and maintenance methods are highly needed to restore the original design function to its working integrity. Logic tree analysis was used to breakdown all causes of failure; thus, mitigation was performed by carrying out …

Root Cause Analysis Of Leakage Tube Boiler: A Study Case, Lydia Kartika Basaria Sitompul, Dedi Priadi

Journal of Materials Exploration and Findings

Oil and gas industry can have catastrophic implications for human life, the environment, and the economy. This paper investigated failure analysis using root cause analysis especially for boiler tube leakage of Heat Exchanger. Identify the issue using microscopic examination and energy dispersive x-ray analysis were conducted on the tube inside and outside surface to determine root cause of the failure. The formation of a protective film in the aluminum-brass tube during the starting stage is very important for ensuring adequate film protection throughout the service life of the heat exchanger. During this stage, exposure to unpolluted water is essential. The …

Implementation Of Machine Learning Using Deep Neural Networks To Estimate The Failure Risk Caused By Leakage In Pressure Relief Devices, Adi Yudho Wijayanto, Yossi Andreano, M. Ali Yafi Rizky, Dedi Priadi

Journal of Materials Exploration and Findings

The primary objective of deploying Pressure Relief Device (PRD) equipment is to ensure the safety of pressure vessels within a pressurized system. Over time, PRD equipment may degrade and fail to perform its intended function, which must be identified as a failure mode. To mitigate potential risks associated with this, it is recommended that an approach such as risk-based inspection (RBI) be implemented. Despite the widespread adoption of RBI, the method relies on qualitative techniques, leading to significant variations in equipment risk assessments. This study proposes a novel risk analysis method that uses deep learning-based machine learning to develop a …

Analysis Risk Based Inspection Api 581 On Lpg Spherical Tank At Pt. Xyz, Sigit Trahmawan, Eddy Sumarno Siradj, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

Liquified petroleum gas (LPG) spherical tanks are pressure vessel equipment for storing fuel gas products. The high pressure along with the fuel gas inside as flammable and combustible substance means that this equipment might result major accident hazard such as explosion, fires and environmental pollution. This study is aimed calculated and mitigate risk on 500 metric ton capacity LPG spherical tank using Risk-based inspection (RBI) analysis method that makes risk as its foundation. This RBI method uses quantitative analysis referring to API 581 to determine the risk of LPG Spherical Tank by determining the probability of failure (PoF) and the …

Agility Opportunities In Construction Project Management “Exploring Opportunities In Construction Projects In Integration With Waterfall Methodology.”, Nevine G. Gado Dr., Noha A, Elsayed Dr

Journal of Engineering Research

The objective of project management for construction projects is to deliver projects that meet customer requirements, business values, and goals in the most efficient manner. Project management is considered one of the vastly debated fields currently while the commonly adopted approach is still the waterfall model. However, in today's construction market, the number of different stakeholders,’ and the way projects awarded are changing. This has created a gap between management's belief of how today's construction projects should be conducted and how they are executed. Despite the growing importance of traditional construction project management as the preferred project delivery method, there …

From Hunch To Analysis: Risk Management In Tiered Dispute Resolution Processes, Troy L. Harris

Pepperdine Dispute Resolution Law Journal

The dispute resolution is process is filled with risk that decision-makers must identify, analyze, and manage. Risks can include unclear and conflicting objectives and uncertainties regarding strategic alternatives. While many litigators are adept at identifying these risks, systematic analysis and management of them is not typically part of lawyers’ education or training. And yet there is a rich body of management scholarship devoted to risk analysis and decision-making based upon multiple criteria. This article brings the insights of this management literature to bear upon a phenomenon commonly found in relational contracting, the “tiered” dispute resolution process. The article demonstrates that …

Study On Human Integrity Management System Maturity Level For Supporting Asset Integrity And Process Safety Implementation, Anggiat M. Sihotang, Dedi Priadi, Datu Rizal Asral

Journal of Materials Exploration and Findings

The human factors (HF) are recognized as one of critical process safety barriers involved in normal and abnormal conditions in the oil and gas industry. In order to strengthen the HF roles as barriers we need to ensure that the actions generated are based on a valid risk assessment of the operation to be addressed by a relevant human factor analysis. Organizations within the oil and gas process have made much progress in understanding and implementing HF improvement programs. However, organizations are not always clear about what are their current situations in managing HF, their priorities for HF to be …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

A Case Study Assessing The Integration Of Nuclear Safety And Security In Facilities Using A Monte Carlo Simulation Aided Analytical Hierarchy Process, Theodore A. Thomas, Shraddha Rane, Jason Timothy Harris

International Journal of Nuclear Security

Nuclear safety and security are essential in all operations using nuclear and radioactive materials. Even though both elements are important, the evolution of these programs has not developed at the same rate. As such, their integration has been met with challenges. This study analyzed the potential for synergy across different criteria and settings when integrating nuclear safety and security. The criteria included eight points where overlap could be identified between nuclear safety and security. Three work settings—industrial, medical, and research—were evaluated. Responses were collected from nine individuals who worked with nuclear materials in various capacities and different nuclear work settings. …

Assessing Past Airworthiness Directives And How Safety Management Systems May Benefit Aviation Product Design And Manufacturing, Damon Lercel Ph.D., Manoj Patankar Ph.D., Richard Steckel Ph.D.

Journal of Aviation/Aerospace Education & Research

The European Union Aviation Safety Agency (EASA) continues to promulgate Safety Management Systems (SMS) across aviation organizations when it recently issued SMS requirements for EASA certificated Part 145 maintenance, repair and overhaul (MRO) organizations and Part 21 Design & Manufacturing (D&M) organizations. Currently, the Federal Aviation Administration (FAA) has no such rule in place for these U.S.-based organizations, which may challenge those doing business in countries where EASA policies apply. Given that a majority of the United States’ D&M and MRO population is made up of smaller organizations, it is likely a U.S. SMS regulation will require justification of the …

A Decision-Making Approach To Reduce The Risk Of Measurement Uncertainty For Product Size, Mostafa Awadalla Sedeek, Fatma Abdallah Elerian, Ossama Badie Abouelatta, Mona. A. Aboueleaz

Mansoura Engineering Journal

The measurement uncertainty has a significant impact on quality control processes. This is particularly true of standards that are assessed to determine if a product is compliant. This ambiguity introduces two potential risks of decision-making: accepting a non-conventional product (the consumer's risk) or rejecting a conventional product (the producer's risk). This investigation explores the potential for false decisions caused by measurement errors in product assessments. By studying data near the control limits, a greater understanding of the manufacturing process is intended to facilitate informed decision-making, and guide the implementation of effective quality control methods. The investigation highlights the importance of …

Planning Innovation For Implementing Modular Prefabricated Construction In Housing Development In Indonesia Using A Risk-Based Iso 56002:2019 Approach To Improve Project Performance, Deansa Agya Rahman, Yusuf Latief

Smart City

The development of housing in Indonesia, growing rapidly due to urbanization and population growth, faces challenges in terms of land, labor, and housing backlog. Despite being innovative, modular prefabrication methods are limited by unattractive designs and high costs, slowing down construction, harming the productivity of construction companies, and hindering the growth of the national construction sector. These challenges are prevalent in various countries and are influenced by low knowledge, conservative mindsets, and inhibiting regulations. In Indonesia, additional issues include a lack of mastery of modular prefabrication methods and awareness of long-term benefits. This research identified innovative risk-based applications of modular …

Airspace Saturation And Midair Collision Risk: A Case Study At A Class D Airport, Luigi Raphael I. Dy, John H. Mott

International Journal of Aviation, Aeronautics, and Aerospace

Near midair collisions are precursor events to actual collisions and may be an indicator of risk. While previous studies have used reports of near midair collisions to relate factors such as airspace saturation to near midair collisions, the reports relied upon were generally subjective in nature. With the adoption of automatic dependent surveillance-broadcast (ADS-B), the approximate position of every equipped aircraft can be recorded. A six-month case study was performed at the Purdue University airport to relate the number of 1000-foot proximity events to airspace saturation, and whether the Class D airspace affected this relationship. Through a logistic regression analysis, …

Recommendations On Flood Management At Cengkareng Drain Estuary In Enhancing Estuary Resilience To Compound Hazard, Athena Hastomo, Evi Anggraheni, Adi Prasetyo, Dwita Sutjiningsih

CSID Journal of Infrastructure Development

Jakarta's coastal region, characterized by dense settlements and industrial zones, faces significant flood risks due to land subsidence and rising sea levels, exacerbated by human activities and climate change. This study evaluates the effectiveness of the National Capital Integrated Coastal Development (NCICD) project, which proposes embankments along Jakarta's coast for enhanced flood resilience. Focusing on the Cengkareng Drain estuary, two-dimensional HEC-RAS simulations were employed. This study incorporates various factors such as precipitation, tides, waves, rising sea levels, and land subsidence to model extreme flood scenarios. The analysis reveals key strategies to improve flood management. Firstly, introducing new pumping stations and …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, Datu Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Pipeline Risk Analysis Optimization With Monte Carlo Method Using Gamma Distribution, Farhan Rama Digita, Jaka Fajar Fatriansyah, Abdul Rahim Ridzuan, Hanna Ovelia, Imam Abdillah Mas'ud, Irma Hartia Tihara, Baiq Diffa Pakarti Linuwih

Journal of Materials Exploration and Findings

The inspection process of piping components in the oil and gas industry is one of the most crucial things, given the high risk posed by pipeline system failures, which have a huge impact on losses, both from environmental and financial aspects. Risk-based inspection with the Monte Carlo method is one of the efforts that can be made to minimize failures in piping systems, by involving data distribution to calculate the probability of component failure. Although the normal distribution is commonly used for generating random variables, its use in corrosion rate calculation can lead to overestimation due to negative corrosion rate …

A Review On Ship Recycling Industry In Bangladesh From Global Perspective, Ahammad Abdullah, Zobair Ibn Awal, M Ziauddin Alamgir, Md. Jobayer Mia, Farihatul Mim, Utpal K. Dhar

Journal of Ocean and Coastal Economics

At present, the global center of the ship breaking and recycling industry is in South Asia, specifically Bangladesh, India, and Pakistan. These three countries account for 70–80 percent of the international recycling market for ocean-going vessels, with China and Turkey covering most of the remaining market. Only about 5 percent of global volume is scrapped outside these five countries. Bangladesh has environmentally beneficial coastal region and affordable labor that make the shipbreaking and recycling business as a potential sector for the country. In addition, ship recycling and its related businesses are helping to solve our nation’s unemployment issues at all …

Evaluation Of Reliability Indices For Gas Turbines Based On The Johnson Sb Distribution: Towards Practical Development, Elbar Mohamed, Djeddi Ahmed Zohair, Ahmed Hafaifa, Charrak Naas, Abdelhamid Iratni, Ilhami Colak

Emirates Journal for Engineering Research

Recent advancements in computer engineering have provided effective solutions for processing and analyzing complex systems and big data. Consequently, the adjustment and standardization of this data play a crucial role in addressing issues related to the monitoring of industrial systems. In this study, we propose a reliability approach for gas turbines to identify and characterize their degradation using operational data. We introduce a method for adjusting turbine reliability data, which resolves the challenges associated with the nature of these operating data. This enables us to determine a mathematical function that models the relationships between turbine reliability parameters and evaluate the …

Static Malware Family Clustering Via Structural And Functional Characteristics, David George, Andre Mauldin, Josh Mitchell, Sufiyan Mohammed, Robert Slater

SMU Data Science Review

Static and dynamic analyses are the two primary approaches to analyzing malicious applications. The primary distinction between the two is that the application is analyzed without execution in static analysis, whereas the dynamic approach executes the malware and records the behavior exhibited during execution. Although each approach has advantages and disadvantages, dynamic analysis has been more widely accepted and utilized by the research community whereas static analysis has not seen the same attention. This study aims to apply advancements in static analysis techniques to demonstrate the identification of fine-grained functionality, and show, through clustering, how malicious applications may be grouped …

Mechanisms To Reduce Cyber Threats And Risks, Saad Alsuwaileh

Journal of Police and Legal Sciences

Addressing the mechanisms of reducing cyber threats and risks Research Because cyberspace is an important arena for various international interactions, especially in recent times in light of the increase in cyber-attacks between some countries, which affects their national security. In this context, many countries are trying to make an effort to develop their capabilities to be used in any cyber-attack, or to take adequate preventive measures to protect them from any possible cyberattacks, especially in light of the impact of these attacks on vital places and institutions such as banks and ministries or on important facilities such as water and …

Development Of Dynamic Risk-Based Inspection Using Forward Difference Approach For Pipe Failure Due To Uniform Corrosion, Jaka Fajar Fatriansyah, Zahra Nadia Nurullia, Andreas Federico, Dedi Priadi

Journal of Materials Exploration and Findings

The oil and gas industry is one of the world's largest and most influential energy contributors. All aspects involved in the operation of this industry are fundamental to be reviewed and managed correctly, especially by preventing or minimizing the failures that could occur. Uniform corrosion is the most common component failure mechanism that can cause failure in the oil and gas industry. The company's actions in managing and preventing the risk of this type of failure have a major role in the sustainability of the company due to the possibility of more significant impacts if the risk cannot be handled …

Multi-Mode Total Focusing Method (Mtfm) To Detect High-Temperature Hydrogen Attack (Htha) – A Review, Anjar Oktikawati, Rini Riastuti, Nursidi Yuanto

Journal of Materials Exploration and Findings

High temperature hydrogen attack (HTHA) is a commonly observed harm component in carbon steels exposed to high temperature and pressure in a hydrogen-rich environment. Hydrogen together with carbon responds to produce methane. The formation of methane bubbles in steel can lead to loss of fracture toughness and lead to intergranular cracking. The main challenge of this problem lies in early warning systems that can detect these bubble clusters before they reach the advanced stage. Several advanced ultrasonic inspections have been developed over the years due to the challenges of inspecting materials for defects and discontinuities. These cover time-of-flight diffraction (ToFD), …

Self-Learning Algorithms For Intrusion Detection And Prevention Systems (Idps), Juan E. Nunez, Roger W. Tchegui Donfack, Rohit Rohit, Hayley Horn

SMU Data Science Review

Today, there is an increased risk to data privacy and information security due to cyberattacks that compromise data reliability and accessibility. New machine learning models are needed to detect and prevent these cyberattacks. One application of these models is cybersecurity threat detection and prevention systems that can create a baseline of a network's traffic patterns to detect anomalies without needing pre-labeled data; thus, enabling the identification of abnormal network events as threats. This research explored algorithms that can help automate anomaly detection on an enterprise network using Canadian Institute for Cybersecurity data. This study demonstrates that Neural Networks with Bayesian …

Freespan Analysis For Subsea Pipeline Integrity Management Strategy, Nurul Hadi, Muhammad Helmi, Edo Cathaputra, Dedi Priadi, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Abstract. Over a rough seabed or on seabed subject to scour, freespans can occur when contact between a subsea pipeline and the seabed is lost over an acceptable distance. When this exceeds the allowable freespan length, design stresses can be exceeded, and a vortex induced vibration (VIV) response can be initiated, resulting in the risk of fatigue failure. If this is not predicted and controlled properly, it will affect pipeline integrity, leading to expensive rectification and intervention work. Freespan analysis consisted primarily of a screening check in which the as-found freespans from Remotely Operated Vehicle (ROV) or multibeam Side …

Structural Integrity Analysis Of The Rig Mast Following Repair Of Two Diagonal Braces In The Upper Mast Section, Rendhatya Padmodwiputra, Johny Wahyuadi Soedarsono, Mirza Mahendra, Bambang Eka Satria, Chandra Arif, Eka Juni Suarthana

Journal of Materials Exploration and Findings

During a move to the new drilling location, two braces of the upper mast section on a 550 HP oil and gas rig was damaged. When damage is discovered, the rig operating company should conduct a risk analysis related to the damage using the standard used to determine rejection criteria and follow-up repairs. The strength of the rig mast is calculated using Finite Element Analysis (FEA) with initial conditions (before damage occurs) where all braces are installed and extreme conditions where neither brace is repaired. The calculation results are then used to assess the risk of reducing the rig mast …

Ground Risk Model For Uavs, Andrew V. Shelley

International Journal of Aviation, Aeronautics, and Aerospace

This paper develops an alternative to the ground risk model provided by JARUS SORA. Key inconsistencies in the SORA ground risk model are identified, specifically ground risk continuing to increase when there is no further increase in fatality probability.

Population density is a critical component of UAS ground risk. Definitions of population density adopted by various regulatory jurisdictions are reviewed. A categorisation of population density is developed based on official statistics categories for New Zealand. This categorisation is more granular than that provided by SORA, enabling a more nuanced assessment of risk.

A ground risk model is then developed using …

Impact Of Supply Chain Robustness And Resilience On Firm Performance: A Perspective Of Pakistan Textile Industry, Aalyan Munir, Aamer Hanif, Nimra Afzal

Business Review

This study investigates the impact of supply chain resilience and robustness on firm performance and also examines the significance of supply chain risk management (SCRM) in minimizing the consequences of disruptions on supply chain performance in the context of the COVID-19 pandemic. Data was gathered using convenience sampling technique through a survey from management staff (n=409) working in textile companies operating in Pakistan. Using SPSS software for data analysis, this study proposes a mediation model where risk management practices are proposed as a mediator between supply chain resilience, robustness and firm performance. The findings highlight that supply chain resilience and …