Engineering Commons^™

Development Of High-Performing Polydimethylsiloxane-Based Membranes For Carbon Dioxide Separation, Tao Hong

Doctoral Dissertations

Membrane separation is highlighted as one of the most promising approaches to mitigate the excessive CO₂ [carbon dioxide] emission, due to its significant reduction of energy cost compared with many conventional separation techniques. Unfortunately, the separation performance of current membranes does not meet the practical CO₂/N₂ [nitrogen] separation requirements. And due to the huge volume of industrial flue gas, membranes with exceptionally high permeability are needed for practical reasons.

Currently, the separation mechanism of most polymeric membranes is based on size-sieving. However, this method is not sufficient for CO₂/N₂ separations due to the …

The Rheology And Roll-To-Roll Processing Of Shear-Thickening Particle Dispersions, Sunilkumar Khandavalli

Doctoral Dissertations

Particle dispersions are ubiquitous in our daily lives ranging from food and pharmaceutical products to inks. There has been great interest in the recent years in formulation of functional inks to fabricate myriad flexible electronic devices through high-throughput roll-to-roll technologies. The formulations often contain several functional additives or rheological modifiers that can affect the microstructure, rheology and processing. Understanding the rheology of formulations is important for tuning the formulation for optimal processing. This thesis presents investigations on the rheology of particle dispersions and their impact on roll-to-roll technologies. Shear-thickening behavior is common in particle dispersions, particularly, concentrated particulate inks. We …

The Role Of Chain Configuration In Governing The Rational Design Of Polymers For Adhesion, Onyenkachi Wamuo

Doctoral Dissertations

ABSTRACT THE ROLE OF CHAIN CONFIGURATION IN GOVERNING THE RATIONAL DESIGN OF POLYMERS FOR ADHESION SEPTEMBER 2017 ONYENKACHI C. WAMUO, B.Eng., FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI (FUTO), NIGERIA M.S., UNIVERSITY OF MASSACHUSETTS AMHERST Ph.D., UNIVERSITY OF MASSACHUSETTS AMHERST Directed by: Professor Shaw Ling Hsu The chain configurational control of polymers used in adhesion can be utilized as a means of tuning the cohesive properties of hot melt adhesives (HMAs). The cohesive properties control the solidification, strength, setting speed. Propylene-Ethylene copolymers (PP-co-PE) and thermoplastic polyurethanes (TPUs) were studied. In the first project, the effects of sequence distribution of the two types …

Polyorganosiloxanes: Molecular Nanoparticles, Nanocomposites And Interfaces, Daniel H. Flagg

Doctoral Dissertations

Five research projects described. First, a reproducible, lab-scale synthesis of MQ silicone copolymers is presented. MQ copolymers are commercially important materials that have been ignored by the academic community. One possible reason for this is the difficulty of controlling and reproducing the preparative copolymerizations that have been reported. A reproducible method for lab-scale preparation was developed that controls molecular weight by splitting the copolymerization into the discrete steps of sol growth from silicate precursor and end-capping by trimethylsiloxy groups. Characterization of MQ products implicates that they are composed of highly condensed, polycyclic structures. The MQ copolymers prepared in the first …

Synthesis And Structure-Property Relationships Of Polymeric Membranes For Small Molecule Transport, Haomiao Yuan

Doctoral Dissertations

One key challenge for alkaline anion exchange membrane fuel cells is the lack of alkaline stable polycations. The synthesis of random, crosslinked and block copolymers based on the cobaltocenium phenylene norbornene (NPC) monomer is described. The polymers were synthesized from ring-opening metathesis polymerization (ROMP) of the NPC monomer showed excellent thermo-alkaline and thermo-oxidative stability. Random copolymers, crosslinked networks and amphiphilic diblock copolymers were prepared by copolymerizing NPC with different hydrophobic monomers: norbornene for random copolymers, dicyclopentadiene for crosslinked networks and a norbornene dibenzyl ether monomer for amphiphilic diblock copolymers. Mechanical robust membranes were prepared from all these copolymers. Polymers with …

Solution-Based Assembly Of Conjugated Polymers Into Nanofibers For Organic Electronics, Daniel E. Acevedo Cartagena

Doctoral Dissertations

Solution-based crystallization of conjugated polymers offers a scalable and attractive route to develop hierarchical structures for electronic devices. The introduction of well-defined nucleation sites into metastable solutions provides a way to regulate the crystallization behavior, and therefore the morphology of the material. A crystallization method for generating metastable solutions of poly(3-hexylthiophene) (P3HT) was established. These metastable solutions allow P3HT to selectively crystallize into nanofibers (NFs) on graphene-coated surfaces. It was found that the crystallization kinetics is faster with increasing P3HT molecular weight and concentration. Through in situ atomic force microscopy, it was confirmed that NFs grow vertically in a face-on …

Guiding The Self-Assembly Of Block Copolymers In 2d And 3d With Minimal Patterning, Jaewon Choi

Doctoral Dissertations

Directed self-assembly (DSA) of block copolymers (BCPs) based on topographic patterns is one of the most promising strategies for overcoming resolution limitations in the current lithographic process and fabricating the next generation data storage devices. While the DSA of BCPs with deep topographic patterning has been extensively studied both experimentally and theoretically over the past two decades, less attention has been paid to the development of the DSA process using minimal topographic patterning. This dissertation focuses on understanding the effect of minimal topographic patterning on guiding the self-assembly of BCPs in 2D and 3D. We demonstrate that minimal trench patterns …

Synthesis, Characterization And Application Of Block Copolymer And Nanoparticle Composites, Yue Gai

Doctoral Dissertations

The “bottom-up” fabrication of functional hybrid material can be achieved by using directed self-assembly of functional nanoparticles (NP) and block copolymers (BCP) as templates. The versatile nanostructures of BCP provide possibilities to precisely control NPs spatial distribution and the resulting hybrid materials exhibit enhanced electrical, mechanical and optical functionalities. Three main topics related to BCP/NP composites are discussed in this dissertation: I) the spatial distribution of large NP in linear BCP; II) the morphology control of BCP templates with new architectures; and III) the magneto-optical properties of hybrid material using magnetic NPs. For well-ordered BCP/NP composite, the ratio of NP …

Characterization Of Electronic And Ionic Transport In Soft And Hard Functional Materials, Lawrence A. Renna

Doctoral Dissertations

Control over concurrent transport of multiple carrier types is desired in both soft and hard materials. For both types of materials, I demonstrate ways to characterize and execute governance over both electronic and ionic transport, and apply these concepts in the fabrication of devices with applications in conducting composites, photovoltaics, electrochemical energy storage, and memristors. In soft materials, such as polymers, the topology of the binary polymer mesoscale morphology has major implications on the charge/ion transport. Traditional approaches to co-continuous structures involve either using blends of polymers or diblock copolymers. In polymer blends, the structures are kinetically trapped and …

Modulation Of Cell Behaviors On Photo-Crosslinked Polymer Networks And Polymer Spherulites, Jinbo Dou

Doctoral Dissertations

This dissertation presents novel biodegradable and photo-crosslinkable poly(-caprolactone) acrylates (PCLAs) to achieve polymer networks with controllable surface chemistry, stiffness, and topographical features, as well as crystallization-induced PCL, poly(3-hydroxybutyrate) (PHB) and poly(L-lactic acid) (PLLA) surfaces for investigating cell-material interactions. Chapter I reviews the recent progress of injectable polymeric biomaterials in the last decade for various tissue engineering applications. Chapter II investigates the variation of thermal and mechanical properties of PCL triacrylate (PCLTA) networks with different crosslinking time, and further studies the smooth muscle cell (SMC) responses to these networks. Chapter III studies the SMC responses to hydrolyzed PCLTA/methoxyl polyethylene glycol monoacrylate …

Effect Of Crosslinking On Carbon Nanotube Materials Through Chemical Treatment And Irradiation, Xinyi Lu

Doctoral Dissertations

Carbon nanotubes (CNTs) exhibit a variety of exceptional properties, especially their ultrahigh tensile strength on the order of 100GPa show promise for constituting the next-generation carbon fiber. However, challenges remain to translate these properties into useful technology, primarily due to the sliding of the tubes past one another under tensile loading. The work presented in this dissertation is focused on enhancing the interaction between the CNTs and their bundles in a macro-assembly, in order to improve the tensile properties of the material.

Applying inter-tube crosslinks has been predicted to significantly enhance the stress transfer between the CNT components. We developed …

All Acrylic Based Thermoplastic Elastomers: Design And Synthesis For Improved Mechanical Performance, Wei Lu

Doctoral Dissertations

Thermoplastic elastomers (TPEs) have been widely studied because of their recyclability, good processability, low production cost and distinct performance. Compared to the widely-used styrenic TPEs, acrylate based TPEs have potential advantages including exceptional chemical, heat, oxygen and UV resistance, optical transparence, and oil resistance. However, their high entanglement molecular weight lead to “disappointing” mechanical performance as compared to styrenic TPEs. The work described in this dissertation is aimed at employing various approaches to develop the all acrylic based thermoplastic elastomers with improved mechanical performance.

The first part of this work focuses on the introduction of acrylic polymers with high glass …

Thiol-Ene Chemistry As An Enabler Of New Polymer Structures And Architectures, Joel M. Sarapas

Doctoral Dissertations

This dissertation focuses on two distinct projects: the synthesis and design of novel cell penetrating peptides mimics (CPPMs), and the implementation of the thiol-ene click reaction to generate new polymer architectures and chemistries. Guanidinium-rich CPPMs were generated through both ROMP and RAFT polymerizations, allowing for a comparison to be made across polymer backbone chemistries with respect to both siRNA and protein cellular internalization. A particularly effective methacrylate derived block copolymer was able to deliver siRNA to nearly an entire Jurkat T cell population. The thiol-ene reaction was implemented initially within the context of improving material design for solid polymer electrolytes …

Deformation And Adhesion Of Soft Composite Systems For Bio-Inspired Adhesives And Wrinkled Surface Fabrication, Michael Imburgia

Doctoral Dissertations

The study of soft material deformation and adhesion has broad applicability to industries ranging from automobile tires to medical prosthetics and implants. When a mechanical load is imposed on a soft material system, a variety of issues can arise, including non-linear deformations at interfaces between soft and rigid components. The work presented in this dissertation embraces the occurrence of these non-linear deformations, leading to the design of functional systems that incorporate a soft elastomer layer with application to bio-inspired adhesives and wrinkled surface fabrication. Understanding the deformation of a soft elastomer layer and how the system loading and geometry influence …

New Synthetic Platforms For Functional Polymer Zwitterions And Degradable Materials, Chiachih Chang

Doctoral Dissertations

This thesis describes new synthetic platforms for a series of functional polymeric materials containing hydrophilic and/or zwitterionic moieties as pendent groups. The hydrophilicity, biocompatibility, and degradability of these polymers hinged on innovative monomer designs and adaption of appropriate polymerization strategies including controlled radical polymerization, metathesis polymerization, and ring-opening polymerization. Novel, functional sulfobetaine polymers having functional groups (i.e, alkenes and alkynes) directly attached to the zwitterionic moieties were prepared and shown to stabilize oil-water interfaces, allowing for interfacial crosslinking to afford robust polymer capsules. This represents the first example of inserting functionality directly into the zwitterionic moieties of polymer zwitterions, allowing …