Engineering Commons^™

Tribocorrosion And Metal Release From Austenitic Stainless Steels 304 And 201 In Simulated Cassava Food Contact, Robert Addai, Temitope E. Olowoyo, Thalia E. Standish, Jeffrey Daniel Henderson, Ubong Eduok, Yolanda Hedberg

Chemistry Publications

Cassava is the third most significant calorie source in the tropics. Its processing has changed from traditional methods to stainless steel processing machines. This study investigated the influence of cassava on metal release from two common stainless steels, ASTM 304 and 201, with and without friction, and on tribocorrosion (multianalytically) of 304. Cassava was relatively corrosive and hindered repassivation of the surface oxide of stainless steel, but it also acted as a lubricant against mechanical friction. The combined action of friction and cassava caused a significant increase in iron, chromium, nickel, and manganese release from the stainless steels (30–35- fold …

Effect Of Electron Irradiation On Mechanical, Tribological And Thermal Properties Of Polytetrafluoroethylene, K. D. Ormanbekov, B. K. Rakhadilov, A. Zh. Zhassulan, N. E. Mukhamedov, A. B. Shynarbek, N. M. Magazov

Eurasian Journal of Physics and Functional Materials

The article presents the study results of the electron irradiation effect on the mechanical, tribological and thermal properties of polytetrafluoroethylene (PTFE). The results allow a better understanding of the processes occurring in the structure of PTFE under irradiation and reveal potential applications of the modified material with improved tribological characteristics, high thermal resistance and mechanical strength. In this work the samples were tested for wear resistance and thermal stability. It was found that the effect of electron irradiation leads to a significant increase in the microhardness of the material by 1.5 times compared to the initial state. However, degradation of …

Securing Pint Glasses On Serving Trays With Magnetic Attachments, Jayden Commendatore

Senior Theses

It is extremely common for servers in the restaurant industry to have pint glasses slip off their serving tray, wasting both time and money for the restaurant. I have designed a sleeve attachment that will clip on to the bottom of a pint glass. The metal sleeve attachment will be attracted to a magnet placed into the serving tray. This increases the normal force of the pint glass, resulting in an increase in the friction force between the tray and sleeve attachment, and helping secure the glass to the tray. In order to optimize the design, the value of the …

One-Dimensional Lateral Force Anisotropy At The Atomic Scale In Sliding Single Molecules On A Surface, Yuan Zhang, Daniel J. Trainer, Badri Narayanan, Yang Li, Anh T. Ngo, Sushila Khadka, Arnab Neogi, Brandon Fisher, Larry A. Curtiss, Subramanian K.R.S. Sankaranarayanan, Saw Wai Hla

Physics Faculty Publications

Using a q+ atomic force microscopy at low temperature, a sexiphenyl molecule is slid across an atomically flat Ag(111) surface along the direction parallel to its molecular axis and sideways to the axis. Despite identical contact area and underlying surface geometry, the lateral force required to move the molecule in the direction parallel to its molecular axis is found to be about half of that required to move it sideways. The origin of the lateral force anisotropy observed here is traced to the one-dimensional shape of the molecule, which is further confirmed by molecular dynamics simulations. We also demonstrate that …

Manufacturing And Testing The Permanent Magnet Linear Motor, Renjie Kang

Senior Theses

Controlled mechanical motion is vital in many useful applications in technology. Among them, linear motors have advantages over traditional rotating motors. In this work, we built a permanent magnet linear motor to test and measure its energy efficiency. A maximum 29% total energy efficiency, and 67% energy transfer rate, were detected. In addition, a C-shape support structure was added to the moving part in order to increase the moving accuracy. The tests show that, with the support structure, the fluctuation in the vertical direction decreases significantly, but the friction of the system slightly increases.

The Effects Of Surface Pace In Baseball, Jason Farlow

Senior Theses

A baseball travels across different surfaces at different paces. The goal of this experiment is to find a percentage difference in speeds the ball will reflect off a given surface. The energy lost on the turf surface was far more significant than on dirt surface as the turf lost an average of 26% of its energy as compared to just 16% of the energy on dirt. In the Northwest conference, teams play on four turf-based infields and five dirt-based infields. The results of this study suggest that kinetic friction forces are more significant in reducing ball rebound speed than in …

The Effect Of Frictional And Adhesion Forces Attributed To Slurry Particles On The Surface Quality Of Polished Copper, Yi-Koan Hong, Ja-Hyung Han, Tae-Gon Kim, Jin-Goo Park, Ahmed A. Busnaina

Ahmed A. Busnaina

The effect of frictional and adhesion forces attributed to slurry particles on the quality of copper surfaces was experimentally investigated during copper chemical mechanical planarization process. The highest frictional force of 9 Kgf and adhesion force of 5.83 nN were observed in a deionized water-based alumina slurry. On the other hand, the smallest frictional force of 4 Kgf and adhesion force of 0.38 nN were measured in an alumina slurry containing citric acid. However, frictional (6 Kgf) and adhesion (1 nN) forces of silica particles in the slurry were not significantly changed regardless of the addition of citric acid. These …

The Effect Of Frictional And Adhesion Forces Attributed To Slurry Particles On The Surface Quality Of Polished Copper, Yi-Koan Hong, Ja-Hyung Han, Tae-Gon Kim, Jin-Goo Park, Ahmed A. Busnaina

Ahmed A. Busnaina

The effect of frictional and adhesion forces attributed to slurry particles on the quality of copper surfaces was experimentally investigated during copper chemical mechanical planarization process. The highest frictional force of 9 Kgf and adhesion force of 5.83 nN were observed in a deionized water-based alumina slurry. On the other hand, the smallest frictional force of 4 Kgf and adhesion force of 0.38 nN were measured in an alumina slurry containing citric acid. However, frictional (6 Kgf) and adhesion (1 nN) forces of silica particles in the slurry were not significantly changed regardless of the addition of citric acid. These …

An Experimental Investigation Characterizing The Tribological Performance Of Natural And Synthetic Biolubricants Composed Of Carboxylic Acids For Energy Conservation And Sustainability, Carlton Jonathan Reeves

Theses and Dissertations

Over the last several decades the lubrication industry has been striving to bring bio-based lubricants known as biolubricants to prominence. The reasons for the increased environmental initiatives are due to depletion of oil reserves, increases in oil price, stringent government regulations on petroleum-based oils, and most importantly, concerns for protecting the environment. With an estimated, 50% of all lubricants entering the environment and much of these being composed of toxic mineral oils, biolubricants have begun to witness a resurgence. This experimental investigation seeks to develop a new class of ecofriendly biolubricants that are less toxic to the environment, derived from …

Anticipating The Friction Coefficient Of Friction Materials Used In Automobiles By Means Of Machine Learning Without Using A Test Instrument, Mustafa Ti̇mur, Fati̇h Aydin

Turkish Journal of Electrical Engineering and Computer Sciences

The most important factor for designs in which friction materials are used is the coefficient of friction. The coefficient of friction has been determined taking such variants as velocity, temperature, and pressure into account, which arise from various factors in friction materials, and by analyzing the effects of these variants on friction materials. Many test instruments have been produced in order to determine the coefficient of friction. In this article, a study about the use of machine learning algorithms instead of test instruments in order to determine the coefficient of friction is presented. Isotonic regression was selected as the machine …

The Effect Of Frictional And Adhesion Forces Attributed To Slurry Particles On The Surface Quality Of Polished Copper, Yi-Koan Hong, Ja-Hyung Han, Tae-Gon Kim, Jin-Goo Park, Ahmed Busnaina

Jin-Goo Park

The effect of frictional and adhesion forces attributed to slurry particles on the quality of copper surfaces was experimentally investigated during copper chemical mechanical planarization process. The highest frictional force of 9 Kgf and adhesion force of 5.83 nN were observed in a deionized water-based alumina slurry. On the other hand, the smallest frictional force of 4 Kgf and adhesion force of 0.38 nN were measured in an alumina slurry containing citric acid. However, frictional (6 Kgf) and adhesion (1 nN) forces of silica particles in the slurry were not significantly changed regardless of the addition of citric acid. These …

Quantitative Assessment Of Sample Stiffness And Sliding Friction From Force Curves In Atomic Force Microscopy, Nancy Burnham, Jon Pratt, Gordon Shaw, Lee Kumanchik

Nancy A. Burnham

It has long been recognized that the angular deflection of an atomic force microscope(AFM) cantilever under “normal” loading conditions can be profoundly influenced by the friction between the tip and the surface. It is shown here that a remarkably quantifiable hysteresis occurs in the slope of loading curves whenever the normal flexural stiffness of the AFM cantilever is greater than that of the sample. This situation arises naturally in cantilever-on-cantilever calibration, but also when trying to measure the stiffness of nanomechanical devices or test structures, or when probing any type of surface or structure that is much more compliant along …

Slides: Disappearing Roads--An Efd Project: An Exploration Into Low Impact And Efficient Gas Field Drilling, Charles Dolan

Best Practices for Community and Environmental Protection (October 14)

Presenter: Rich Haut, Houston Advanced Research Center (HARC), for Dr. Charles Dolan, University of Wyoming, Environmentally Friendly Drilling Program

25 slides

Predicting The Hydrogen Pressure To Achieve Ultralow Friction And Diamondlike Carbon Surfaces From First Principles, Haibo Guo, Yue Qi, Xiaodong Li

Faculty Publications

Hydrogen atmosphere can significantly change the tribological behavior at diamond and diamondlike carbon (DLC) surfaces and the friction-reducing effect depends on the partial pressure of hydrogen. We combined density functional theory modeling and thermodynamic quantities to predict the equilibrium partial pressures of hydrogen at temperature T, P_H2 (T), for a fully atomic hydrogen passivated diamondsurface. Above the equilibrium P_H2 (T), ultralow friction can be achieved at diamond and DLC surfaces. The calculation agrees well with friction tests at various testing conditions. We also show that P_H2 (T) …

Topography-Induced Contributions To Friction Forces Measured Using An Atomic Force/Friction Force Microscope, Sriram Sundararajan, Bharat Bhushan

Sriram Sundararajan

Most friction studies using an atomic force/friction force microscope, while concentrating on material-induced effects, often present users with conflicting and confusing interpretations of the topography-induced friction forces. It has been generally reported that topography-induced contributions are independent of scanning direction and can be removed by subtracting friction data from forward and backward scans. In this article, we present friction studies on samples with well-defined topography variations and find that the above-given statement is not generally true. At surface locations involving significant changes in topography, the topography-induced contributions to friction forces are found to be different between forward and backward scanning …

Effect Of Inhibitor On Electrochemical Behavior Of 1cr18 Stainless Steel In Acidic Solution Under Friction, Jinping Xiong

Journal of Electrochemistry

The electrochemical behavior of 1Cr18 stainless steel had been studied using a reciprocating triboelectrochemical equipment under friction in 0.2 mol/L H2SO4 solution with and without addition of thiourea, the frictionized surface of 1Cr18 stainless steel had been examined by the SEM, XPS and IR. The results showed that the loss rate of 1Cr18 stainless steel in the solution could be reduced by addition of thiourea. The adsorption of thiourea on the surface of 1Cr18 stainless steel prohibited the oxidization of Cr3+ to form Cr() and formation of passive film consisting of CrO42- or/and Cr(), and make the passive range to …