Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics

Theses/Dissertations

Sustainability

Institution
Publication Year
Publication

Articles 31 - 47 of 47

Full-Text Articles in Engineering

Anaerobic Membrane Bioreactors To Treat Municipal Wastewater At Ambient Temperatures, Matthew D. Seib Oct 2015

Anaerobic Membrane Bioreactors To Treat Municipal Wastewater At Ambient Temperatures, Matthew D. Seib

Dissertations (1934 -)

Anaerobic biotechnology is viewed as a sustainable alternative to aerobic biotechnology for municipal wastewater recovery. However, anaerobic processes have not been successful in cold climates. Past examples have not been able to meet low organic effluent concentrations, or have failed due to biomass washout resulting from low temperature operation and short hydraulic residence time. Recently, the anaerobic membrane bioreactor (AnMBR) has been shown to achieve low effluent organic concentrations and maintain stable anaerobic biomass. However, shortcomings have included high energy demands for membrane operation and poor understanding of microbial community structures within AnMBRs. This dissertation describes efforts to improve AnMBRs …


The Effect Of Urbanization On The Embodied Energy Of Drinking Water In Tampa, Florida, Mark Vincent Eli Santana Sep 2015

The Effect Of Urbanization On The Embodied Energy Of Drinking Water In Tampa, Florida, Mark Vincent Eli Santana

USF Tampa Graduate Theses and Dissertations

Increasing urbanization has serious implications for resource and energy use. One of these resources is drinking water. The increased amount of impervious surfaces associated with urban development is responsible for increased runoff during rain events, which may have a negative impact on the quality of nearby bodies of water, including drinking water sources. The growing populations associated with urbanization require a higher water demand. In addition, urban drinking water systems use energy to collect, treat, and distribute a safe reliable effluent to users. Therefore, this study focuses on the degree to which urbanization influences the embodied energy of drinking water …


A Cradle To Farm Gate Life Cycle Analysis Of Land Use In U.S. Pork Production, William Benjamin Putman Jul 2015

A Cradle To Farm Gate Life Cycle Analysis Of Land Use In U.S. Pork Production, William Benjamin Putman

Graduate Theses and Dissertations

The goal of this study was to conduct a detailed Life Cycle Assessment (LCA) of the U.S. live swine production supply chain to quantify land use requirements and to assess the impact associated with various ration compositions. The functional unit was defined as one kilogram (2.2 pounds) of live swine at the farm gate, ready for transport to the abattoir. This assessment focused on the three highest producing USDA regions, which encompassed the Midwest (Regions 5 and 7) and the Southeast (Region 4), representing 86% of U.S. market hog production.

First, a literature review was conducted to summarize the most …


Using The Triple Bottom Line To Select Sustainable Suppliers For A Major Oil And Gas Company, Pandarinath Adarsh Sunkari May 2015

Using The Triple Bottom Line To Select Sustainable Suppliers For A Major Oil And Gas Company, Pandarinath Adarsh Sunkari

Graduate Theses and Dissertations

Companies have primarily been focusing on the financial bottom line i.e., on increasing profits by increasing revenues and reducing costs. With high energy usage and environmental change posing threats to the environment and business operations, companies are now considering sustainability. Since some global suppliers have low cost labor, Social well-being and human development has also emerged as major goals of a company performing global operations. Focusing on these three goals is termed the "Triple Bottom Line" (TBL). We study and explore the TBL benefits that could be realized by an oil and gas company by focusing on sustainable suppliers. A …


Incorporating Environmental And Social Factors Into Decision-Making Of An Oil And Gas Industry To Improve Sustainability, Gaurav Dabhadkar May 2015

Incorporating Environmental And Social Factors Into Decision-Making Of An Oil And Gas Industry To Improve Sustainability, Gaurav Dabhadkar

Graduate Theses and Dissertations

The energy industry (including the oil and gas industry) is facing unparalleled scrutiny and demands from stakeholders including investors, regulators (industry and environmental), communities, and other stakeholders. Sustainable development is one of the major concerns of the oil and gas industry. Companies are seeking to increase sustainability of their operations by considering environmental and Social concerns in addition to economic concerns. Oil and gas companies need to take decisions at different stages of the product life cycle (e.g. planning, design, exploration, production, and clean-up) which have direct or indirect impact on the organization's objectives. Addressing economic, technical, Social, and environmental …


The Use Of Jatropha Curcas To Achieve A Self Sufficient Water Distribution System: A Case Study In Rural Senegal, Alexandra Archer Jan 2015

The Use Of Jatropha Curcas To Achieve A Self Sufficient Water Distribution System: A Case Study In Rural Senegal, Alexandra Archer

Dissertations, Master's Theses and Master's Reports - Open

The use of Jatropha curcas as a source of oil for fueling water pumps holds promise for rural communities struggling to achieve water security in arid climates. The potential for use in developing communities as an affordable, sustainable fuel source has been highly recommended for many reasons: it is easily propagated, drought resistant, grows rapidly, and has high-oil-content seeds, as well as medicinal and economic potential. This study uses a rural community in Senegal, West Africa, and calculates at what level of Jatropha curcas production the village is able to be self-sufficient in fueling their water system to meet drinking, …


Mathematical Modeling For Platform-Based Product Configuration Considering Total Life-Cycle Sustainability, Tian Lan Jan 2015

Mathematical Modeling For Platform-Based Product Configuration Considering Total Life-Cycle Sustainability, Tian Lan

Theses and Dissertations--Mechanical Engineering

Many companies are using platform-based product designs to fulfill the requirements of customers while maintaining low cost. However, research that integrates sustainability into platform-based product design is still limited. Considering sustainability during platform-based design process is a challenge because the total life-cycle from pre-manufacturing, manufacturing and use to post-use stages as well as economic, environmental and societal performance in these stages must be considered. In this research, an approach for quantifying sustainability is introduced and a mathematical model is developed for identifying a more sustainable platform. Data from life-cycle assessment is used to quantify environmental factors; criteria from the Product …


A Framework For Sustainable Material Selection For Multi-Generational Components, Ryan T. Bradley Jan 2015

A Framework For Sustainable Material Selection For Multi-Generational Components, Ryan T. Bradley

Theses and Dissertations--Mechanical Engineering

The early stages of a product’s design are a critical time for decisions that impact the entire life-cycle cost. Product designers have mastered the first generation; however, they currently do not have the ability to know the impact of their decisions on the multi-generational view. This thesis aims at closing the gap between total life-cycle information and the traditional design process in order to harbor sustainable value creation among all stakeholders involved. A framework is presented that uses a combination of a life-cycle costing methodology and an evolutionary algorithm in order to achieve a sustainability assessment for a true multi-generational …


Advanced Sustainable Concrete Materials For Infrastructure Applications, Kaylea Ann Smith Jan 2015

Advanced Sustainable Concrete Materials For Infrastructure Applications, Kaylea Ann Smith

Masters Theses

"This study was performed to examine the effects of cement replaced by high volumes of Class C fly-ash on durability characteristics of concrete up to 120 days. Specifically, this study investigates possibility of amending American Society for Testing and Materials (ASTM) to allow High Volume Fly-ash (HVFA) concrete to cure until later ages prior to testing instead of 28 days. Five mix designs were compared with varying fly-ash percentages from 0 to 70% (by total cementitious mass). No other additives were present in any of the five mix designs. Water-to-cementitious ratio (w/cm) and total cementitious material remained constant as 0.40 …


A Novel Microgrid Demand-Side Management System For Manufacturing Facilities, Terance Jerome Harper Jul 2014

A Novel Microgrid Demand-Side Management System For Manufacturing Facilities, Terance Jerome Harper

Open Access Theses

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable.

For this research, a manufacturing process that had approximately …


An Integral Framework For Sustainable Building Design, Bushra Asfari Jun 2014

An Integral Framework For Sustainable Building Design, Bushra Asfari

Masters Theses

Selection of materials for building design is a delicate process hinged of a number of factors which can be cost or environmental related, depending on the objectives of the design. This process becomes more difficult when designers are faced with several material options for each building component. This thesis presents the design and development of a framework that enables designers understand the trade-off between cost and environmental related factors when selecting materials for building design. The framework is based on the integration of Autodesk Revit, Microsoft access, and modeling modified Harmony search multi-objective optimization tool adapted to account for material …


Simulating Land Use Land Cover Change Using Data Mining And Machine Learning Algorithms, Amin Tayyebi Jan 2013

Simulating Land Use Land Cover Change Using Data Mining And Machine Learning Algorithms, Amin Tayyebi

Open Access Dissertations

The objectives of this dissertation are to: (1) review the breadth and depth of land use land cover (LUCC) issues that are being addressed by the land change science community by discussing how an existing model, Purdue's Land Transformation Model (LTM), has been used to better understand these very important issues; (2) summarize the current state-of-the-art in LUCC modeling in an attempt to provide a context for the advances in LUCC modeling presented here; (3) use a variety of statistical, data mining and machine learning algorithms to model single LUCC transitions in diverse regions of the world (e.g. United States …


The Impact Of Advanced Wastewater Treatment Technologies And Wastewater Strength On The Energy Consumption Of Large Wastewater Treatment Plants, Timothy Stephen Newell Dec 2012

The Impact Of Advanced Wastewater Treatment Technologies And Wastewater Strength On The Energy Consumption Of Large Wastewater Treatment Plants, Timothy Stephen Newell

UNLV Theses, Dissertations, Professional Papers, and Capstones

Wastewater treatment is an energy intensive process often requiring the use of advanced treatment technologies. Stricter effluent standards have resulted in an increase in the number of wastewater treatment plants (WWTPs) with advanced treatment over time. Accordingly, associated energy consumption has also increased. Concerns about lowering operating costs for WWTPs and reducing associated greenhouse gas generation present an incentive to investigate energy use in WWTPs. This research investigated the impact of wastewater strength and the introduction of advanced treatment technologies, to replace traditional technologies on energy use to treat wastewater in WWTPs. Major unit processes were designed for a 100 …


Legal Issues In Green Construction, Namrata Shrestha May 2012

Legal Issues In Green Construction, Namrata Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

The most recent "green construction movement", made a significant impact on the design and construction industry in the United States. Organizations such as the American Institute of Architects (AIA) have lobbied governmental entities to provide financial incentives to promote green construction. The green construction community also promotes the notion that a healthier working and living environment is achieved. Due to finical incentives coupled with projected long-term energy cost savings, many owners of new construction are considering green construction as an option. Accompanying the "green construction movement", new kinds of legal issues, particularly relating to green aspects such as certification, energy …


Characterization Of Green Roofs And Their Potential Effects On The Union College Campus, Cybil Tribie Jun 2011

Characterization Of Green Roofs And Their Potential Effects On The Union College Campus, Cybil Tribie

Honors Theses

A green roof is the construction of protective layers and vegetation on the roof of a building. Green roofs are capable of providing ecological benefits to the environment as well as economic advantages for the client. Therefore, my thesis will explore the characterization features of green roofs by focusing on the layers they are made up of, the different types of green roofs, and the benefits they can provide. Although this technology is relatively new to the United States in comparison to places such as Germany, where green roofs have been extensively used for over 40 years, there is a …


Time Valuation Of Risk A Delayed-Bang Approach, Abhishek Pathak Jul 2009

Time Valuation Of Risk A Delayed-Bang Approach, Abhishek Pathak

Engineering Management & Systems Engineering Theses & Dissertations

The subject of this thesis is the combined use of engineering economics and survival analysis in estimating time-value of risk-related resources. The discussion includes (1) the need for sustainable risk management, (2) the importance of time-valuation of risk related resources in the allocation or selection among competing risk mitigation alternatives, (3) the convergence of deterministic engineering economics, survivability analysis, and probabilistic analysis, and (4) results and examples of application in the context of prevention of risk event or mitigation of its consequences.

The significance of this thesis is in how three topics: engineering economics, survivability analysis, and probability theory can …


Water Resources Of Tacoma, Washington, Richard Martin Glaser Jul 1967

Water Resources Of Tacoma, Washington, Richard Martin Glaser

Graduate Student Research Papers

This study explores the fresh water and hydroelectricity resources of the City of Tacoma, Washington. The history and development of the water supply and hydroelectric facilities is examined. One can see that the development of the water resources has been directly affected by the growth in population and industry and that the nearness to the city of development sites has been an aid in this development. With the amount of water available at present and the increase in hydro-electric facilities during this decade, the future outlook for Tacoma in the field of water resources seems bright.