Engineering Commons^™

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Weiwei Lin, Shengxian Wang, Jianqing Zhang

Journal of Electrochemistry

A new polymer E Twas synthesized and used as a corrosion inhibitor for reinforced concrete. The inhibitive behavior and mechanism were studied with linear polarization ,Tafel polarization,EIS and XPS method in simulated pore solution system with concrete samples.The result showed that the polymer was a mixing type inhibitor. A 1% dosage was sufficient to imhibit the corrosion of steel in simulated pore solution system. The salt endurance was enhanced from 0.02 mol/L to 0.10 mol/L.The result also showed the good synergetic effect of NaNO 2,especially in low NaNO 2 concentration.The EIS showed that E_T has dual function on reinforced concrete,i.e.,densifying …

Corrosion Characteristics Of Electrodeposited Ni Mo P Alloy Immersed In Nacl Solution, Yue Zeng, Hongxin Huang, Xiaoming Xiao, Shixun Lian

Journal of Electrochemistry

The corrosion characteristics of electrodeposited Ni Mo P alloy immersed in 5wt.% NaCl solution were investigated using immersion, anodic polarization curves, XPS and AES analysis. The corrosion rates of amorphous Ni Mo P alloys are lower than that of crystalline Ni Mo P alloys. Anodic polarization curve experiments show that for the electrodeposited Ni Mo P alloys, the nickel mol fraction of which has in between 0.719 and 0.868, the corrosion potential moves to positive with the increase of P content, and the peak current value of active region increase with the increase of Mo content in alloys, though the …

Characterization Of Iron Oxides And Atmospheric Corrosion Of Steel, Sei Jin Oh

Physics Theses & Dissertations

The study of corrosion behavior was performed using three different analytical techniques, which provided information on the formation, development and layering of iron oxides on the corrosion products as a function of atmospheric conditions, exposure time and type of steel. In particular, the protective layer formed on weathering steel was investigated as a function of different amounts of alloying elements in the steel, atmospheric conditions and exposure times. Combined together, the results provided a better understanding of the atmospheric corrosion behavior of steel, and formed a part of database of the atmospheric corrosion characteristics.

Accurate characterization of the iron oxides …

Electrochemical Study Of The Corrosion Behavior Of Coalesced Copper And Sw-206 Stainless Steel In The Acetic-Acid Solution, Rongzong Hu, Changjian Lin, Jianguang Tan

Journal of Electrochemistry

In order to provide a theoretic and experimental consideration for the material selection and anit-corrosion in the petrochemical industries the corrosion behavior of coalesced copper and sw-206 stainless steel in the acetic acid solution was studied by electrochemical impedance spectroscopy and polarization techniques. The effects of the temperature,acetic acid concentration and solubilized oxygen in the acetic acid solution on the corrosion process of this two metals were analyzed. It was found that these effects obviously accelerate corrosion process for the coalesced copper,but no apparent influnce for the sw-206 stainless steel.In the the acetic acid solution,containing water and oxygen were beneficial …

The Inhibition Of Amphipathic S- And N-Containing Compounds On Carbon Steel Corrosion, Wei Xing, Yibin Shan, Du Guo, Tianhog Lu, Shiquan Xi

Journal of Electrochemistry

Ordered monolayers of S- and N-containing amphipathic corrosion inhibitors were depoitod onto the surfaces of carbon steel electrode with super-molecular assembly technique. The effect of molecular aggregation of monolayers on carbon steel corrosion in 0. 05 mol dl￣(-3)H_2SO_4 and the mechanisms of these inhibitors were discussed in details. It was found that the transport of hydrated hydrogen ion to the surface of steel depends strongly on the inhibitor molecular aggregation in the monolayers.

The Composition Structure And Corrosion Resistance Of Al-Mn Alloy Plating, Jiaju Guo

Journal of Electrochemistry

The Al-Mn alloy plating was electrodeposition from low temperature molten salts(below 200℃),its chemical composition control,corrosion resistance as well as the relationshipbetween chemical composition and structure were studied.The results indicate that the main effect onchemical composition of Al-Mn alloy plating is Mn ion concentration in molten salts.The Mn contentin the range of 25～40(wt)%, Al-Mn alloy plating has amorphous structure. In 0.5 mol/L H_2SO_4and NaCl solution ,corrosion resistance of the alloy plating is much better.When the alloy hasamorphous structure,corrosion resistance of plating has been remarkably increased.

Application Of Inhibitor To Improve The Anticorrosion Performance Of Electrophoretic Coating, Changshou Cai, Fangteng Su, Bihuan Liu, Guomou Wen, Jingdong Guo

Journal of Electrochemistry

To improve the anti-corrosion performance of electrocoating,organic andinorganic inhibitors are applied in an anodic electrophoretic-coating.The results show that thedeposition of polymer with zinc phospate exhibits a high inbihition efficiency.The inhibitionmechanism of the inhibitor in electrocoating has been studied.