Engineering Commons^™

Numerical Investigation Of Full Scale Thunderstorm Downbursts: A Parametric Study And Comparison To Meteorological Model, Christopher Oreskovic

Electronic Thesis and Dissertation Repository

A series of Large Eddy Simulations using an atmospheric meteorological cloud model have been used to investigate the important geometric and thermal parameters that influence a thunderstorm downburst outflow, as it pertains specifically to the idealized cooling source model. A separate set of Large Eddy Simulations make use of the same idealized cooling source model, in a realistic atmospheric base state using real field sounding data, in an attempt to make a quantifiable comparison to a downburst from a full cloud simulation. Randomness has been added to the cooling source forcing function to mimic the thermal variation in a real …

Application Of Natural Convection For Photovoltaic Cooling And Photocatalytic Disinfection, Usman J. Rajput

Electronic Thesis and Dissertation Repository

Two investigations for improving renewable technologies are engaged. First is the examination of the enhancement of heat transfer at the rear of a hot photovoltaic panel by natural convection using various configurations and the other is analyzing a new photocatalytic collector for water heating and cleaning. A 20 Watt polycrystalline panel is exposed to indoor simulated solar light, under constant ambient temperature and stagnant wind conditions. Three configurations are considered: a partial heat sink, a water cavity and a water channel. The experimentally obtained convective heat transfer coefficients are 4.4 W•m^-2•K^-1 at the rear of the bare …

Studies In Small Scale Thermal Convection, Daniel F. Stranges

Electronic Thesis and Dissertation Repository

The effect of non-Fourier heat transfer and partial-slip boundary conditions in Rayleigh-Bénard are analyzed theoretically. Non-Fourier fluids possess a relaxation time that reflects the delay in the response of the heat flux to a change in the temperature gradient while the partial slip boundary condition assumes that the fluid velocity and temperature are not equal to that of the wall. Both non-Fourier and partial-slip effects become important when small-scale heat transfer applications are investigated such as convection around micro- and nano-devices as suggested by the extended heat transport equations from kinetic theory. Other applications are also known to exhibit one …

Digital Generation And Radiation In Spherical-Void-Phase Porous Media, Nolan J. Dyck

Electronic Thesis and Dissertation Repository

This thesis documents a novel method for method to generate digital samples of spherical void phase foams to predict effective hydraulic, thermal and radiative properties with the intention of assessing the viability of carbon foam as a volumetric solar receiver. The method employs discrete element modeling software to simulate the compression of spherical bubbles into a fully periodic, cubic domain. These domains were subsequently used to determine a variety of effective transport properties to be used in porous media design problems. The predicted properties agreed well with those obtained through experimental and other numerical methods, notably predicting more accurate properties …

Development And Assessment Of An Impact Apparatus And High-Speed Camera Motion Tracking System To Quantify The Effect Of Static Muscle Loads On Fracture Threshold Measures In The Distal Radius, Jacob M. Reeves

Electronic Thesis and Dissertation Repository

Distal radius fractures are prevalent, debilitating, and costly. This thesis conducts an in vitro investigation of these injuries, examining the role of static muscle loading on fracture threshold measures (i.e., force, impulse, energy). Initially, an impact apparatus and custom LabVIEW colour-thresholding program were designed and assessed for repeatability and accuracy in quantifying fracture measures and impact kinematics. These tools were then used to test six pairs of cadaveric forearms, with static muscle loads simulated in one specimen from each pair. Distal radius fractures were achieved in 5 pairs, with perilunate dislocations in the remaining pair. None of the …

Experimental Investigation Of Wind Effect On Solar Panels, Ayodeji Abiola-Ogedengbe

Electronic Thesis and Dissertation Repository

Photovoltaic Solar Panels for electricity generation are outdoor low-rise structures that are vulnerable to damage by the wind. The existing building codes do not contain information about the impact of the wind on these structures and hence do not provide comprehensive guidelines to mitigate such impact. The present study is a contribution to the ongoing efforts to codify the wind loading on solar panels. In this study, experimental investigations were conducted on the scaled model of a ground-mounted solar panel structure whose surface is geometrically similar to an inclined flat plate and mounted on three-legged support. The panel comprises of …

Numerical Modelling Of Species Exchange In A 3d Porous Medium: Modelling Exchange Within The Human Lung, Chelsea E. Johnson

Electronic Thesis and Dissertation Repository

The volume-averaged oxygen transport equation is closed using a volume-averaged form of Fick’s law of diffusion between the air and tissue to simulate species exchange within the lungs’ alveoli using a computational fluid dynamics (CFD) 3D conjugate domain model. Pore level simulations of a terminal alveolated duct are used to determine that the transport of inhaled oxygen from the cluster inlet to the alveolar walls is diffusion dominated. The resistance to oxygen diffusion into the tissue is found to be a function of the tidal volume and tissue transport properties, with a maximum respiration frequency at which the full amount …

Parametric Study On A Novel Waste Heat Recovery System, Ghaleb Rustom Abdul Sater

Electronic Thesis and Dissertation Repository

The present thesis is based on an industry-sponsor project involving a novel waste heat-to-electricity conversion system. This proprietary system utilizes thermal energy from a low temperature heat sources to produce torque that drives an electric generator to produce electricity. The system needs to be studied through scientific research to help with optimizing the product development, component design, and overall system performance. The main objectives of this study are to develop simulation tools (numerical model) that will allow to simulate the thermo-fluid processes in various system components and to use this numerical model to study the heat transfer and phase-change processes …

Studies In Shallow And Thin-Film Flows, Md Mahmuder R. Faisal

Electronic Thesis and Dissertation Repository

The present study examines the influences of surface tension and wind direction in shallow or thin-film flow with the inclusion of inertial effect. In this present study starting with the fundamental equations (conservation of mass and momentum), an analytical method is introduced to determine the bottom stress at different position of a shallow or thin-film flow domain under the influence of oscillatory wind conditions. The novelty of this study is that the viscous and surface tension effects are considered in this study, whereas in most of the existing studies in a shallow or thin-film flow domain (a shallow tailings pond) …

Improved Non-Linear Solution Of Dip Coating Flow, Omar Bin Yusuf

Electronic Thesis and Dissertation Repository

A thin layer of film is developed on the surface of a substrate in the dip coating process where the substrate is initially immersed into the coating fluid and then withdrawn continuously from the coating fluid bath. In this study a two dimensional flow of the thin film for a Newtonian fluid is examined theoretically by dividing the film into three separate regions. A general formulation is developed for a thin film flow, which then simplifies for each region upon considering appropriate assumptions to each region. The influence of inertia and surface tension in the presence of gravity is investigated …

Preoperative Planning Of Robotics-Assisted Minimally Invasive Cardiac Surgery Under Uncertainty, Hamidreza Azimian

Electronic Thesis and Dissertation Repository

In this thesis, a computational framework for patient-specific preoperative planning of Robotics-Assisted Minimally Invasive Cardiac Surgery (RAMICS) is developed. It is expected that preoperative planning of RAMICS will improve the rate of success by considering robot kinematics, patient-specific thoracic anatomy, and procedure-specific intraoperative conditions. Given the significant anatomical features localized in the preoperative computed tomography images of a patient's thorax, port locations and robot orientations (with respect to the patient's body coordinate frame) are determined to optimize characteristics such as dexterity, reachability, tool approach angles and maneuverability. In this thesis, two approaches for preoperative planning of RAMICS are proposed that …

On-Line Monitoring Of Engine Health Through The Analysis Of Contaminants In Engine Lubricant, Hamid R. Aghayan

Electronic Thesis and Dissertation Repository

Monitoring automobile liquids, such as engine lubricants, has received increasing attention recently mainly due to environmental and safety legislation, coat saving measures, and customer demand.

Literature review in monitoring engine lubricant condition indicates systems approach, an intellectual discipline method to address complex problem, has never been used to monitor engine performance and health through the engine sub-systems such as lubricant system. The literature review also points toward deficiency in considering lubricant as a source of information for engine performance evaluation, and lack of understanding of engine lubricant as a medium with random properties.

Engine lubricant condition reflects the state of …