Engineering Commons^™

Introduction To Bioaerosols Assessment And Control, 2nd Edition, Cheri Marcham, John (Jack) Springston

Publications

• Risk Assessment
• Assessment for the Presence of Bioaerosols
• Sampling
• Purpose/ Necessity
• Interpretation Controls
  • Ventilation
  • Other Controls

A Cohort Retrospective Study Of Framingham Score And Ecg Abnormality Among Coal Mining Workers, Faizal Ablansah Anandita, Isman Firdaus, Rino Alvani Gani, Retno Asti Werdhani, Muchtaruddin Mansyur

Occupational and Environmental Medicine Journal of Indonesia

Introduction. ECG is widely used for detecting cardiovascular disease in coal mine worker’s medical check-up. As the study has proven, coal mine workers have a double cardiovascular risk from their workplace hazard and their own medical risks as individuals. An early detection and risk assessment method is needed to predict ECG abnormalities in the future. This study will analyze the relationship between ECG abnormality and Framingham Risk Score on coal mine workers’. Methods. We examine ECG result from medical check-up of male coal worker during 2018 and 2021. Using Minnesota Code, we determine ECG abnormality categories in the 2021 result, …

The Effects Of Dental Hygiene Instrument Handles On Muscle Activity Production, Jessica R. Suedbeck, Daniel Russell, Cortney Armitano Lago, Emily A. Ludwig

Dental Hygiene Faculty Publications

Purpose The objective of this study was to compare the effects of ten commercially available instrument handle designs’ mass and diameter on forearm muscle activity during a simulated periodontal scaling experience.

Methods A convenience sample of 25 registered dental hygienists were recruited for this IRB-approved study. Ten commercially available instruments were categorized into four groups based on their masses and diameters: large diameter/light mass, small diameter/light mass, large diameter/heavy mass, and small diameter/heavy mass. Participants were randomized to four instruments with one from each group. Participants scaled with each instrument in a simulated oral environment while muscle activity was collected …

Automated Approach For The Enhancement Of Scaffolding Structure Monitoring With Strain Sensor Data, Sayan Sakhakarmi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Construction researchers have made a significant effort to improve the safety of scaffolding structures, as a large proportion of workers are involved in construction activities requiring scaffolds. However, most past studies focused on design and planning aspects of scaffolds. While limited studies investigated scaffolding safety during construction, they are limited to simple cases only with limited failure modes and simple scaffolds. In response to this limitation, this study aims to develop an automated scaffold monitoring approach capable of monitoring large scaffolds. Accordingly, this study developed an automated scaffold safety monitoring framework that leverages sensor data collected from a scaffold, scaffold …

Back And Shoulder Exoskeletons For Occupational Use: A Review, Erkan Ozan

Theses

Work-related musculoskeletal disorders (MSDs) account for a large portion of all work-related injuries according to OSHA. Back and shoulder-related disorders make the most of work-related MSDs according to the Bureau of Labor Statistics (BLS). Exoskeletons emerged in recent years with the potential to reduce the risks of work-related musculoskeletal disorders and injuries. Their use in occupational settings is increasing, and exoskeleton designs are rapidly evolving. This paper reviewed recent scientific articles (2015 and after) that evaluated back and shoulder-support passive industrial exoskeletons. The findings of these articles are summarized and analyzed to assess the benefits of passive upper-body exoskeletons by …

Unsupervised Machine Learning For Pattern Identification In Occupational Accidents, Fatemeh Davoudi Kakhki, Steven Freeman, Gretchen Mosher

Faculty Research, Scholarly, and Creative Activity

Creating safe work environment is significant in saving workers’ lives, improving corporates’ social responsibility and sustainable development. Pattern identification in occupational accidents is vital in elaborating efficient safety counter-measures aiming at improving prevention and mitigating outcomes of future incidents. The objective of this study is to identify patterns related to the occurrence of occupational accidents in non-farm agricultural work environments based on workers’ compensation claims data, using latent class clustering method as an un-supervised machine learning modeling approach. The result showed injury profiles and incident dynamics have low, average, and high levels of risks based on the main causes and …

Characteristics And Assessing Biological Risks Of Airborne Bacteria In Waste Sorting Plant, Abbas Norouzian Baghani, Somayeh Golbaz, Gholamreza Ebrahimzadeh, Marcelo I. Guzman, Mahdieh Delikhoon, Mehdi Jamshidi Rastani, Abdullah Barkhordari, Ramin Nabizadeh

Chemistry Faculty Publications

Examining the concentration and types of airborne bacteria in waste paper and cardboard sorting plants (WPCSP) is an urgent matter to inform policy makers about the health impacts on exposed workers. Herein, we collected 20 samples at 9 points of a WPCSP every 6 winter days, and found that the most abundant airborne bacteria were positively and negatively correlated to relative humidity and temperature, respectively. The most abundant airborne bacteria (in units of CFU m⁻³) were: Staphylococcus sp. (72.4) > Micrococcus sp. (52.2) > Bacillus sp. (30.3) > Enterococcus sp. (24.0) > Serratia marcescens (20.1) > E. coli (19.1) > Pseudomonas sp. (16.0) > Nocardia …

Viability And Application Of Mounting Personal Pid Voc Sensors To Small Unmanned Aircraft Systems, Cheri Marcham

Publications

Small Unmanned Aerial Systems in Emergency Response

Current sUAS Uses

• Search and rescue
• Thermal imaging
• Evaluating structural stability
• Spread of wildfires
• Storm damage

Unintended Consequences Of Air Cleaning Chemistry, Douglas B. Collins, Delphine K. Farmer

Faculty Journal Articles

Amplified interest in maintaining clean indoor air associated with the airborne transmission risks of SARS-CoV-2 have led to an expansion in the market for commercially available air cleaning systems. While the optimal way to mitigate indoor air pollutants or contaminants is to control (remove) the source, air cleaners are a tool for use when absolute source control is not possible. Interventions for indoor air quality management include physical removal of pollutants through ventilation or collection on filters and sorbent materials, along with chemically reactive processes that transform pollutants or seek to deactivate biological entities. This perspective intends to highlight the …

What About The Rest Of Them? Fatal Injuries Related To Production Agriculture Not Captured By The Bureau Of Labor Statistics (Bls) Census Of Fatal Occupational Injuries (Cfoi), Bryan Weichelt, Erika Scott, Rick Burke, John Shutske, Serap Gorucu, Wayne T. Sanderson, Murray Madsen, Emily Redmond, Dennis J. Murphy, Risto Rautiainen

Biosystems and Agricultural Engineering Faculty Publications

Surveillance of injuries in production agriculture is necessary to inform stakeholders about workplace hazards and risks in order to improve and advance injury prevention policies and practices for this dangerous industry. The most comprehensive fatal injury surveillance effort currently in the United States is the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries (CFOI), which covers occupational fatalities in all U.S. industries, including production agriculture. However, this surveillance does not include many categories of fatalities that occur during agricultural work or on production agriculture worksites. To better capture the human cost of production agriculture, the authors of this …

Analysis Of Covid-19 Concerns Raised By The Construction Workforce And Development Of Mitigation Practices, Makram Bou Hatoum, Ali Faisal, Hala Nassereddine, Hadi Sarvari

Civil Engineering Faculty Publications

The coronavirus outbreak has created a global health crisis that has disrupted all industries, including the construction industry. Following the onset of the pandemic, construction workers faced and continue to face unprecedented safety and health challenges. Therefore, construction employers established new safety precautions to protect the health and safety of the workforce and minimize the spread of the virus. The new precautions followed the advice and guidelines offered by different health and safety agencies like the Occupational Safety and Health Administration (OSHA), Centers of Disease Control and Prevention (CDC), and the Associated General Contractors of America (AGC). With construction projects …

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

Survey Of Airflow Around A Heated Manikin As A Simulated Aeromedical Evacuation Patient On A Litter With Computational Fluid Dynamics Models, George P. Lemmer

Theses and Dissertations

Aeromedical Evacuations remain the predominant method used to transport patients from forward deployed areas of operations to secure locations with more robust medical infrastructure. Transportation of chemical warfare casualties and infectious patients require additional attention to prevent cross contamination. Specific airflow characteristics paired with environmental control system settings are a gap in scholarly literature. Based on the available literature computational fluid dynamics models were created to simulate the airflow around a patient represented by human geometry using commercially available software. In order to compare simulated and experimental results a heated manikin was placed in the MURPHEE aerosol exposure chamber and …

Tri-State Mining District, Ecological System, And Human Health: Systematic Literature Review Analysis, Jihyun Jane Min

Posters

Objective: Although extensive research exists on corrosive environments in the Tri-State Mining District (TSMD), there has been a lack of research on how such harmful effects in the TSMD could affect residents living in those areas. However, quite recently, such research regarding relationships between the health conditions of low-income residents and toxic elements in TSDM began to grow. Therefore, the increase of empirical studies means greater complexity of the findings that require a more intricate understanding.

Methods: To meet the necessity of the study, this research was conducted by an extensive systematic review of the literature on the harmful effects …

Integrating Aviation Technology, Emergency Services, And Human Resilience: Considerations From Social Scientists, Chelsea A. Lenoble Ph.D., Joel M. Billings Ph.D., Allison A. Kwesell Ph.D., Ray H. Chang Ph.D.

National Training Aircraft Symposium (NTAS)

Unmanned aerial systems (UAS) have a range of applications within the field of disaster response. This presentation offers a novel framework of psychosocial considerations designed to advance UAS and disaster management integration. Social scientists highlight important challenges to the effective integration of three primary entities: UAS, the team of teams that responds to disasters, and populations affected by disasters.

The presentation adopts an emerging theoretical perspective on the intersection between UAS capabilities and disaster phases and extends it by bringing necessary attention to social science issues. Specifically, the framework outlines psychosocial considerations and areas of improvement for preparation (training), response …

Performance Study Of Five Different Cabin Air Filters In The Laboratory And On-Road Drive, Fahad Alqahtani

Graduate Theses, Dissertations, and Problem Reports

One of the aims of installing ventilation filters in a car is to prevent vehicle occupants from inhaling potentially harmful aerosols emanating from the environment. Vehicle cabin filters are essential in ensuring that a vehicle's air conditioning system provides clean air to its occupants. The purpose of the cabin filter is to improve air quality inside the car to provide better comfort and better protect occupants from experiencing unwanted respiratory problems. Using cabin filters in air conditioning systems is a common practice in modern vehicle manufacturing. Scientists and engineers are continually seeking new ways of improving the efficiency and effectiveness …

Green Completion As A Mitigation For Btex Exposure In Gas Flaring: Nigeria Case Study (Exposure Assessment And Cost Model), Akintunde S. Akinyemi

Graduate Theses, Dissertations, and Problem Reports

Gas flaring is an essential part of the oil and gas industry safety and waste management procedures; however, it presents a potential exposure to BTEX compounds, a group of Non-Methane Volatile Organic Compounds (NMVOC), within up to a 10-mile radius of the flare point. The physical and the psychological cost of the journey to work, make employees live close to the workplace. This study examined the perceived exposure of oil and gas industry workers to possible carcinogenic emissions outside the workplace. It looked at the outcomes of the exposure to BTEX through gas flaring drawing on archival data and using …

Evaluation Of Control Strategies For Overhead Work Using Electromyography Of Rotator Cuff Muscles, Hossein Motabar

Graduate Theses, Dissertations, and Problem Reports

Work-related musculoskeletal disorders (MSDs) of shoulder have a significant impact on overall health and economics in the industrialized nations. Rotator cuff is the most frequently injured region in the shoulder complex. Overhead work is considered as one of the most predominant causes of rotator cuff injuries. The workers in construction, automotive, and aerospace industries are routinely exposed to overhead exertions. Elimination of overhead work is nearly impossible due to various task and technology constraints. Therefore, appropriate intervention strategies based on the engineering and administrative controls opt to be used to prevent the hazardous impact of overhead exertions. The objective of …

Arsenic Exposure And Methylation Efficiency In Relation To Oxidative Stress In Semiconductor Workers, Chih-Hong Pan, Ching-Yu Lin, Ching-Huang Lai, Hueiwang Anna Jeng

Community & Environmental Health Faculty Publications

This study examined associations between oxidative stress and arsenic (As) exposure and methylation efficiency in semiconductor workers. An As-exposed group (n = 427) and a control group (n = 91) were included. The As-exposure group (n = 427) included 149 maintenance staff members and 278 production staff members representing high As exposure and low As exposure, respectively. The control group included 91 administrative staff members with no or minimal As exposure. An occupational exposure assessment was conducted to assess personal As exposure by measuring As concentrations in urine, hair, and fingernails of the subjects. Urinary As(III), As(V), monomethylarsonic (MMA), and …

Design And Manufacture Of An Inertial Cascade Impactor For Industrial Hygiene Purposes, Hector Joel Gortaire

Mechanical & Aerospace Engineering Theses & Dissertations

Inertial cascade impactors are devices commonly used for industrial hygiene and pharmaceutical studies. Their main purpose is to separate particulate matter suspended in aerosols according to their sizes, which can vary from over 10 µm to 0.5 µm. Their versatility and ease of operation make them suitable for on-site sampling; however, designing them requires a careful consideration of the different geometric parameters that characterize them.

In this thesis, a 5-stage inertial cascade impactor was designed, modelled, constructed, and tested. The main design parameter was the volumetric flow rate, 40 l/min, which was provided by a vacuum pump. By continuous iterations, …

Improving Safety Performance Of Highway Maintenance Crews Through Pre-Task Safety Toolbox Talks, Zamaan Al-Shabbani

Theses and Dissertations--Civil Engineering

The dangerous work environment in the construction industry and the inherent high risks associated with construction work make it the focus of safety training and regulations. Highway construction and maintenance has unique hazards but seemingly less directly applicable safety standards, regulations, and programs. Department of Transportation (DOT) employees working in highway maintenance are exposed to a variety of unique hazards specifically associated with their work and not relating to the adjacent traffic. Yet, highway construction and maintenance work has not received sufficient attention in terms of safety research and programs. The lack of safety training and education in highway construction …

Analysis Of User Preference With N95 And Powered Air-Purifying Respirators In A Healthcare Work Environment, Brittany Renee Carver

Graduate Theses, Dissertations, and Problem Reports

For those working in the healthcare field, personal protective equipment is vital. Healthcare workers are often first responders when it comes to dealing with patients who are infected or when a disease outbreak occurs. The Occupational Safety and Health Administration (OSHA) requires all healthcare operations to provide employee protection against blood borne pathogens. With the increase of life-threatening disease outbreaks, such as SARS in 2003 and Ebola in 2014, it is of the upmost importance to make sure respirators are best suited for users and acceptable for long term use. It has been shown through previous studies that due to …

Performance Study Of An Unconventional Breathresponse Papr Against A N95 Ffr And Conventional Paprs, Huihui Yang

Graduate Theses, Dissertations, and Problem Reports

Healthcare workers (HCWs) are the first responders when infectious pathogens occur. Powered air-purifying respirators (PAPRs) are one of the most widely used personal protective equipment for healthcare workers. Currently, few studies have been performed with HCWs in the actual healthcare work environments to assess discomforts, acceptance and protective efficiency towards wearing and use of PAPRs. The main purpose of this dissertation was to introduce and assess a brand new unconventional PAPR (Koken breath-response PAPR). The protection performance and user preferance of this unconventional PAPR were studided and compared to that of a N95 FFR and traditional PAPRs.

Firstly, a laboratory …

Social Impacts Of Climate Change And Occupational Heat Stress And Adaptation Strategies Of Mining Workers In Ghana, Victor Fannam Nunfam

Theses: Doctorates and Masters

Excessive heat exposure due to rising temperatures associated with climate change adversely affects workers’ health, safety, productivity, and psychosocial well-being in occupational settings. In the hot and tropical regions of developing countries, long hours of physically demanding work, coupled with inadequate adaptation policies to climate change, increases the occurrence of heat-related illnesses and injuries, and contributes to the loss of productive capacity, poor decision making, and other negative effects on the social well-being of workers.

Based on the theories of social impact assessment, risk assessment, adaptation and resilience planning, this study assesses the social impacts of climate change and occupational …

Noise Induced Hearing Loss Accountability On Jobsites Within The Construction Industry, Joseph O. Lamphere

Construction Management

Noise induced hearing loss is a major issue on jobsites within the construction industry. Every day workers are exposed to hazardous levels of noise, but they are not being properly managed to mitigate this issue. Workers have misconceptions about the topic, but more surprisingly are sometimes indifferent to the effects; believing hearing loss is inevitable, or it can be cured with a hearing aide. Construction has inherent dangers that workers have to deal with every day. Hearing loss might not be on the top of their lists, but the effects are permanent, and they cannot be cured with a hearing …

Nanoparticle Penetration Of Respirator Masks At Construction Sites, Jefferson W. Doehling

Honors College Theses

This experimental investigation studies the effectiveness of N95 respirators at blocking particles between 11.5 and 154 nm in diameter during 4 different construction activities. It is well known that large amounts of dust and debris are generated during construction activities. New research has found that significantly more nanoparticles are generated during construction activities than previously thought. Consequently, the N95 respirators commonly worn to protect against these particles are only rated to block 95% particles larger than 0.3 microns in size. In this investigation, two respirator models were tested, a NIOSH TC-84A-0007 pleated N95 respirator and a NIOSH 42CFR84 foldable N95 …

Assessment Of Ergonomics In Indian Dental Practice: A Workplace Analysis, Divya Gadde

Masters Theses & Specialist Projects

Dental practice requires unique working conditions such as prolonged working hours, strained body postures and laborious, high finesse dental techniques. However, it can be more efficiently performed by the application of ergonomics, rather than physically forcing the worker's body to fit the job. Posture is highly influenced by factors such as inadequate working level, incorrect patient positioning, and poor visual comfort. In order to eliminate musculoskeletal disorders it is necessary to control these and other factors, and design the human work environment to be more ergonomic. The aim of this study was to assess ergonomics within Indian dental practice and …

Occupational Noise Dose Reduction Via Behavior Modification Using In-Ear Dosimetry Among Usaf Personnel Exposed To Continuous Impulse Noise, Jesse A. Trawick

Theses and Dissertations

The purpose of this research was to investigate the use of in-ear noise dosimetry and worker feedback to reduce noise exposures among combat arms instructors and heavy equipment operators in the Air Force. Specifically, this thesis sought to determine how effectively hearing protection devices (HPDs) are being utilized currently, and whether providing at-ear noise exposure data to workers results in reduced noise exposures or changes in worker attitude. These questions were addressed by performing a six-month field study using dosimeters to record worker noise exposures under HPDs. Subjects served as their own control, receiving feedback in only the latter half …

Improving Workers' Safety And Health In The Zimbabwean Mining And Quarrying Industry, Bernard Mabika

Walden Dissertations and Doctoral Studies

Lack of effective occupational safety and health (OSH) strategies is a reason that

workplace accidents in the mining and quarrying industry remain high, making the

industry one of the riskiest operations worldwide. The purpose of this multiple case study

was to explore successful strategies mining and quarrying leaders in Zimbabwe used to

improve OSH. The key research question addressed successful strategies leaders in the

mining and quarrying industry use to improve employee occupational safety and health in

Zimbabwe. Six successful business leaders from 3 mining and quarrying mines in

Zimbabwe demonstrated an exception to unsafe practices, particularly through their

exceptional …

Characterization Of Jet Fuel Combustion Emissions During A C-130 Aeromedical Evacuation Engines Running Onload, Michelle L. Page

Theses and Dissertations

The purpose of this research was to characterize jet fuel combustion emissions (JFCE) in an occupational setting. Prior research demonstrated that aircraft emit hazardous species, especially at engine start-up and ground idle. Complaints of eye, nose, and throat irritation from occupational exposures near aircraft exist. In this study JFCE were tested during an aeromedical evacuation engines running patient onload (ERO) on a C-130 Hercules at the 179^th Airlift Wing, Mansfield-Lahm Air National Guard. Ultrafine particles, VOC, formaldehyde, carbon monoxide (CO), sulfuric acid, and metals were sampled simultaneously in approximate crew and patient breathing zones. Testing methods were portable condensation …