Engineering Commons^™

Property Optimization Of Ferromagnetic Shape Memory Alloys With Respect To Cost, Ajit Behera

Ajit Behera

Ferromagnetic shape memory alloys (FSMAs) are the interesting materials exhibiting shape memory effect and magnetism simultaneously. They show magnetic field-induced strains at room temperature greater than any magnetostrictive, piezoelectric or electrostrictive material, and faster frequency response than temperature driven shape memory alloys. Among various FSMA materials, Ni-Mn-X (X =Ga, In, Sn, Sb) have gained considerable interest due to their multifunctional properties such as shape memory effect, magnetocaloric effect, magnetoresistance, etc., associated with first order martensite to austenite structural transition. FSMA spread its application in broad area from aerospace industry to medical application, but not vividly use; because of its high …

New Solution For Property Improvement Of Automobile Parts, Ajit Behera

Ajit Behera

Now a day materials have been a key to increase the performance of automotive parts, which point out to develop a new materials having better property. Main objective is to achieve increase in quantity and quality of automotive parts produced and for an optimum performance along their life cycle. Cast iron has remained a competitive material due to its low production cost. In fact, among the cast iron group one of alternative lightweight alloys is compacted graphite iron (CGI). Nowadays it is accepted that, CGI can effectively reduce the total weight of an automobile by virtue of its high strength- …

Role Of Composites For Gradual Improvement Of Aircraft Structure, Ajit Behera

Ajit Behera

No abstract provided.

Plasma Surface Engineering: Plasma Spray Coatings, Ajit Behera

Ajit Behera

No abstract provided.

Non-Conventional Machining, Ajit Behera

Ajit Behera

No abstract provided.

Flow Characteristics Of Blast Furnace Slag, Ajit Behera

Ajit Behera

No abstract provided.

Processing And Characterization Of Plasma Spray Coating By Using Industrial Waste And Low-Grade Ore, Ajit Behera

Ajit Behera

No abstract provided.

Flow Characteristics Of Blast Furnace Slag: Practical Aspects Of Synthetic Slag, Ajit Behera

Ajit Behera

No abstract provided.

Plasma Spray Of Fly-Ash+Quartz+Illmenite: Spraying On Metal Substrates, Ajit Behera

Ajit Behera

No abstract provided.

Assesment Of Ammoniacal Ammonium Sulphate Leaching As A Pretreatment Process For Copper Bearing Gold Ores Bas, A.D,, Kucuk, A.,, Yazici, E.Y.,, Deveci, H Proceedings Of Xiiith International Mineral Processing Symposium-Imps 2012; 10/2012, Ahmet Deniz Bas, Ali Kucuk, Ersin Y. Yazici, Haci Deveci

Ahmet Deniz Bas

No abstract provided.

Recovery Of Silver From X-Ray Film Processing Effluents By Hydrogen Peroxide Treatment, Ahmet Deniz Bas, Ersin Y. Yazici, Haci Deveci

Ahmet Deniz Bas

No abstract provided.

Bacteria-Assisted Leaching Of Waste Computer Printed Circuit Boards, Ahmet Deniz Bas, Ersin Y. Yazici, Haci Deveci

Ahmet Deniz Bas

No abstract provided.

Treatment Of A Copper-Rich Gold Ore By Ammonia Assisted Cyanide Leaching, Ahmet Deniz Bas, Ersin Y. Yazici, Haci Deveci

Ahmet Deniz Bas

No abstract provided.

Cryogenic Technique For Processing Steel Treatment, Ajit Behera

Ajit Behera

Cryogenics or deep freezing have been around for quite some time. There is documented research from as far back as the 1930’s where German companies used it on components of jumbo aircraft engines. Cryogenic processing had its US origins in the 1940s. Cold treatments or sub zero treatments are done to make sure there is no retained austenite during quenching. Cryogenics is a relatively new process and to eliminate retained austenite, the temperature has to be lowered, but one that using correct procedures can bring substantial economic benefits. In cryogenic treatment the material is to be deep freeze temperatures of …

Demand On Magic Metal, Ajit Behera

Ajit Behera

No abstract provided.

Preparation And Characterisation Of Graft Biopolymer To Improve Sustained Release Property, Ajit Behera

Ajit Behera

In the present piece of research work focuses on grafting Acrylic acid with HPMC to obtain copolymers with improved properties, biodegradable and biocompatible that will be used as hydrogel or water absorbing polymers. To develop a prolong release activity drug delivery system for the medication purpose to enhance drug activity and reduce the frequency of dose via this hydrogel. A novel HPMC-g- acrylic acid hydrogel was prepared by in-situ emulsifier free emulsion polymerization using benzyl peroxide as an initiator through 1-stage grafting. Acrylic Acid could intercalate into layers of HPMC and form graft composites through in situ graftpolymerization with acrylic …

The Natural Composite: Spheroidal Graphite Iron, Ajit Behera

Ajit Behera

The conventional materials are nowadays not sufficient to cater to the variety of uses and exposure to various environments that may take place while they are put into use. Hence this leads to the development of composites, which nearly suffice the above two conditions. Composite material is a material composed of two or more distinct phases (matrix phase and reinforcing phase) and having bulk properties significantly different from those of any of the constituents. In this developing age for iron industry there is large demand for spherodial Graphite iron (S.G. Iron). S.G. Iron also known as a composite in which …

Characterisation Of Nanoparticle Through Sem, Ftir, Xrd & Dsc, Ajit Behera

Ajit Behera

Nanoparticles are widely due as Sustained Release Drug Delivery System. Due to their smaller size of controlled drug release potential, targeting ability, enhancement of therapeutic efficacy and reduction of toxicity. Nifedipine one of the calcium channel blocker use for the management of hypertension. Spray drier technique develops Nifedipine loaded nanoparticle. Primary superimulsion phase contains Drug (Nifedipine), Polymer (Ethylcellulose) & suitable non-aqueous Solvent (Dichloromethane) which are sprayed over secondary phase containing aqueous solvent with dispersing polymers (PVA) are prepared by taking drug to polymer weight ratio of 20:90. Formation of films on the surface of secondary phase dried, sieved & forward …

New Trend Of Metal Coating In Aerospace Component, Ajit Behera

Ajit Behera

No abstract provided.

Metallurgical Changes In Steels By Cryogenic Processing, Ajit Behera

Ajit Behera

No abstract provided.

E-Mines (E-Madenler), Ersin Y. Yazici, Ahmet Deniz Bas, Haci Deveci

Ahmet Deniz Bas

No abstract provided.

Extraction Of Silver From Waste X-Ray Films By Thiosulphate Leaching, Ersin Y. Yazici, Ahmet Deniz Bas, Haci Deveci

Ahmet Deniz Bas

No abstract provided.

Gtaw ايجادشده با روش جوشکاری Tini-Tic و Tini بررسی ريزساختاری پوشش, Masoud Harooni, Morteza Shamanian, Alireza Fadaei Tehrani

Masoud Harooni

هدف از انجام اين پژوهش بهبود سختي سطحي و ريزساختار فولاد ساده کربنی از نوع 52 و مقايسه ريز ساختار اين دو با هم GTAW ايجاد شده به روش جوشکاری TiNi-TiC و TiNi پوششی از بترتيب با نسبت استوکيومتری مساوي و نسبت ۲۰ Ti-Ni-C و Ti-Ni است. بدين منظور مخلوط پودری به طور جداگانه توسط روش فعال سازی مکانيکی فعال شد و سپس بر سطح TiC درصد تقويت کننده به ضخامت ۱ ميليمتر پيش نشانده شده با استفاده از روش جوشکاری قوسی St نمونه های فولادی 52 تنگستن- گاز ذوب و با فلز پايه امتزاج يافته است. جهت بررسي نوع …

Ocena Wielkości Emisji Do Powietrza Z Arcelormittal Poland S.A. Oddział W Krakowie W Odniesieniu Do Standardów Unii Europejskiej, Marian Mazur, Marek Bogacki, Robert Oleniacz

Robert Oleniacz

The work presents emission factors of main air pollutants for installations of ArcelorMittal Poland S.A. Unit in Krakow (Poland) in comparison with analogous characteristic emissions for iron and steel industry in West Europe. In the comparison four installations (to coke, sinter, pig iron and steel production) were taken into consideration. The emission rates from ArcelorMittal Poland S.A. Unit in Krakow were estimated on the basis of the emission levels and production data from 2004, when took place the most significant production of liquid steel during last several years. As a result of the analysis, most the emission factors (with the …

Structural Characteristics Of Some Ternary Ag-In-Sn Alloys, Zeljko J. Kamberovic

Zeljko J Kamberovic

The Ag-In-Sn system, as one of potential lead-free solder materials, was studied in this paper. The investigated alloys were chosen from two sections, with molar ratio of In:Sn equal to 1:4; 1:2. DTA, XRD, SEM and microhardness investigations were used in order to determine structural characteristics of chosen Ag-In-Sn ternary alloys.

Assessment Of Ecological Effects Of The Implementation Of Continuous Casting Of Steel, Marian Mazur, Marek Bogacki, Robert Oleniacz, Agnieszka Łopata

Robert Oleniacz

The article presents a complex analysis of the impact of the technology of continuous casting of steel (CCS) on the rate of the air pollutant emissions from one of the Polish steel and iron plants. The emission sources occurring in the production process have been identified and their rate has been determined. The implementation of CCS has brought about significant changes in the production cycle of the steel plant and it also has caused an increase of the production effectiveness of steel products. The calculated environment effects have shown a considerable emission decrease of all pollutants in the scale of …

Wpływ Związków Metali Alkalicznych W Procesie Spiekania Rud Na Emisję Pyłów, Marian Mazur, Marek Bogacki, Robert Oleniacz

Robert Oleniacz

The work shows the impact of alkali metals in the sintering process on effectiveness of the electrostatic precipitator and dust emissions into the air. The results of analysis of the content of Na and K in dust discharged from the sinter strand and emitted to the air are presented. It was found that this content is subject to large fluctuations and significantly increases in the dust phase after electrostatic precipitators. Using the balance sheet data, the effect of loads of Na2O and K2O compounds contributed to the sinter mix on emissions of dust. It was also observed high variability of …

Wpływ Wprowadzenia Ciągłego Odlewania Stali Na Wielkość Emisji Zanieczyszczeń Z Huty Katowice, Marian Mazur, Marek Bogacki, Robert Oleniacz

Robert Oleniacz

The paper presents the results of research carried out in 1999 in the Department of Continuous Casting of Steel (CCS) Machines in "Katowice" Steelworks in Dąbrowa Górnicza (Poland), whose main objective was the identification of emission sources of dust and gaseous pollutants, determination of emission factors and assessment of environmental effects associated with the operation of this technology. Particular attention was paid for assessing the impact of the introduction the CCS technology to reduce total emissions from "Katowice" Steelworks.

English title: Impact of the introduction of continuous casting of steel on pollutant emissions from "Katowice" Steelworks.

Związki Siarki Emitowane Z Procesu Wielkopiecowego, Marian Mazur, Marek Bogacki, Robert Oleniacz

Robert Oleniacz

The article describes the problem of the presence of sulfur in the blast furnace process and identifies emission sources of sulfur compounds in this process. On the basis of the measurements and calculations, the types and quantities of these compounds emitted to the air were determined. It was found that pig iron smelting in a blast furnace causes emissions of COS, SO2 and H2S. These emissions occur by losses of blast furnace gas (COS and SO2), transport of blast furnace slag inside the furnace hall (SO2) and treatment of the slag by granulation (H2S). However, the most important are only …

Emisja Związków Fluoru Z Procesów Hutnictwa Żelaza, Marian Mazur, Marek Bogacki, Robert Oleniacz

Robert Oleniacz

The paper presents the results of a comprehensive study of issues related to emissions of fluorine compounds from ferrous metallurgy processes carried out over the last few years. As part of this study raw materials used in these processes were analyzed in terms of fluorine content and its impact on the amount of air emissions of fluorine compounds. Also determined by measuring the concentration levels and emissions of fluorine in the gaseous and solid phase, including water-soluble compounds (considered to be toxic).

English title: Emissions of fluorine compounds from the processes of ferrous metallurgy.