Engineering Commons^™

Liquid Metal-Elastomer Soft Composites With Independently Controllable And Highly Tunable Droplet Size And Volume Loading, Ravi Tutika, Steven Kmiec, A. B. M. Tahidul Haque, Steve W. Martin, Michael D. Bartlett

Michael Bartlett

Soft composites are critical for soft and flexible materials in energy harvesting, actuators, and multifunctional devices. One emerging approach to create multifunctional composites is through the incorporation of liquid metal (LM) droplets such as eutectic gallium indium (EGaIn) in highly deformable elastomers. The microstructure of such systems is critical to their performance, however, current materials lack control of particle size at diverse volume loadings. Here, we present a fabrication approach to create liquid metal-elastomer composites with independently controllable and highly tunable droplet size (100 nm ≦ D ≦ 80 μm) and volume loading (0 ≦ φ ≦ 80%). This is …

Investigation Of The Evolution Of Hydrophobicity And Wettability Of Paper In Multi-Color Printing Process, C Aydemir, A Karademir, S Imamoglu, Bilge N. Altay, Paul D. Fleming, D Tutak

Bilge Nazli Altay

Development And Characterization Of Nano Nickel-Based Conductive Inks For Flexographic Printing Of Electronics And New Interpretations Of Surface Energies Of Solids, Bilge N. Altay

Bilge Nazli Altay

Impact Of Substrate And Process On The Electrical Performance Of Screen-Printed Nickel Electrodes: Fundamental Mechanism Of Ink Film Roughness, Bilge N. Altay, Jerome Jourdan, Vikram S. Turkani, Hervé Dietsch, Dinesh Maddipatla, Alexandra Pekarovicova, Paul D. Fleming, Massood Atashbar

Bilge Nazli Altay

Optical Detection Of Acoustic Emission Signals, C Harvey Palmer, Robert E. Green Jr

Robert A. Green

Piezoelectric transducers, long used in the generation and detection of ultrasonic waves, have more recently been the detector of choice for acoustic emission signals. Optical probing methods, however, have several important advantages for acoustic emission studies: (1) they have an inherent broad frequency response, free from mechanical resonances, (2) they do not interfere with the acoustic waves. (3) since the focused optical beam diameters are typically only a few hundredths of a millimeter, optical methods can probe very close to a crack or a twin, (4) they can probe internally in transparent media, and (5) they can be used over …

Effects Of Temperature Change On Interfacial Delamination In Thermal Barrier Coatings, Hossein Ebrahimi, Soheil Nakhodchi

Hossein Ebrahimi

No abstract provided.

Single-Layer Graphene Oxide Reinforced Metal Matrix Composites By Laser Sintering: Microstructure And Mechanical Property Enhancement, Dong Lin

dong lin

No abstract provided.

Experimental Investigation Of Worm Gears Performance, Part I: Contact Pattern And Worm Wheel Teeth, Alireza Nezamabadi, Ehsan Soury, Arash Houshmand

Arash Houshmand

This paper is focused on the performance of worm gears influenced by the position of the contact pattern. By decreasing in size of the contact pattern area the lubricant film thickness between worm and worm wheel teeth will be decreased and lubricant temperature as a criterion for worm gears performance will be increased. In this experiment by designed tests, the effect of Contact Pattern Position of the Worm Wheel Teeth on the Lubricant Temperature behavior had been investigated. By considering the performed studies on statistical results of the amount of percentage of contact area in every tooth of under experiment …

Optimization Of Contact Pattern Position On The Worm Wheel Teeth By Axial Shift In Worm Wheel Axis, Ehsan Soury, Arash Houshmand, Alireza Nezamabadi

Arash Houshmand

In industrial applications Lubricant temperature decrease is a desired aim in the case of lubricant and gears performance. In this paper the procedure of optimization of worm gears performance by considering the proper contact pattern position had been performed. In accordance with required axial shift in worm wheel axis the contact pattern optimized and as a result the lubricant temperature decreased. This procedure leads to increase gears efficiency and their effective life.

Morphological Instability Leading To Formation Of Porous Anodic Oxides, Ömer Çapraz, Kurt Hebert, Pranav Shrotriya

Ömer Özgür Çapraz

No abstract provided.

Impact Damage On A Thin Glass Plate With A Thin Polycarbonate Backing, Wenke Hu, Yenan Wang, Jian Yu, Chian-Fong Yen, Florin Bobaru

Florin Bobaru Ph.D.

We present experimental and computational results for the impact of a spherical projectile on a thin glass plate with a thin polycarbonate backing plate, restrained in a metal frame, or in the absence of the frame. We analyze the dependence of the damage patterns in the glass plate on the increasing impact velocities, from 61 m/s to 200 m/s. Experimental results are compared with those from peridynamic simulations of a simplified model. The main fracture patterns observed experimentally are captured by the peridynamic model for each of the three projectile velocities tested. More accurate implementation of the actual boundary conditions …

The Formulation And Computation Of The Nonlocal J-Integral In Bond-Based Peridynamics, Wenke Hu, Youn Doh Ha, Florin Bobaru, Stewart A. Silling

Florin Bobaru Ph.D.

This work presents a rigorous derivation for the formulation of the J-integral in bond-based peridynamics using the crack infinitesimal virtual extension approach. We give a detailed description of an algorithm for computing this nonlocal version of the J-integral.We present convergence studies (m-convergence and δ-convergence) for two different geometries: a single edge-notch configuration and a double edge-notch sample.We compare the results with results based on the classical J-integral and obtained from FEM calculations that employ special elements near the crack tip.We identify the size of the nonlocal region for which the peridynamic J-integral value is near the classical FEM solutions.We discuss …

The Meaning, Selection, And Use Of The Peridynamic Horizon And Its Relation To Crack Branching In Brittle Materials, Florin Bobaru, Wenke Hu

Florin Bobaru Ph.D.

This note discusses the peridynamic horizon (the nonlocal region around a material point), its role, and practical use in modeling. The objective is to eliminate some misunderstandings and misconceptions regarding the peridynamic horizon. An example of crack branching in a nominally brittle material (homalite) is addressed and we show that crack branching takes place without wave interaction. We explain under what conditions the crack propagation speed depends on the horizon size and the role of incident stress waves on this speed.

Peridynamic Model For Dynamic Fracture In Unidirectional Fiber-Reinforced Composites, Wenke Hu, Youn Doh Ha, Florin Bobaru

Florin Bobaru Ph.D.

We propose a computational method for a homogenized peridynamics description of fiber-reinforced composites and we use it to simulate dynamic brittle fracture and damage in these materials. With this model we analyze the dynamic effects induced by different types of dynamic loading on the fracture and damage behavior of unidirectional fiber-reinforced composites. In contrast to the results expected from quasi-static loading, the simulations show that dynamic conditions can lead to co-existence of and transitions between fracture modes; matrix shattering can happen before a splitting crack propagates. We observe matrix–fiber splitting fracture, matrix cracking, and crack migration in the matrix, including …

Convergence, Adaptive Refinement, And Scaling In 1d Peridynamics, Florin Bobaru Ph.D., Mijia Yabg Ph.D., Leonardo F. Alves M.S., Stewart A. Silling Ph.D., Ebrahim Askari Ph.D., Jifeng Xu Ph.D.

Florin Bobaru Ph.D.

We introduce here adaptive refinement algorithms for the non-local method peridynamics, which was proposed (in J. Mech. Phys. Solids 2000; 48:175–209) as a reformulation of classical elasticity for discontinuities and long-range forces. We use scaling of the micromodulus and horizon and discuss the particular features of adaptivity in peridynamics for which multiscale modeling and grid refinement are closely connected. We discuss three types of numerical convergence for peridynamics and obtain uniform convergence to the classical solutions of static and dynamic elasticity problems in 1D in the limit of the horizon going to zero. Continuous micromoduli lead to optimal rates of …

Influence Of Van Der Waals Forces On Increasing The Strength And Toughness In Dynamic Fracture Of Nanofibre Networks: A Peridynamic Approach, Florin Bobaru Ph.D.

Florin Bobaru Ph.D.

The peridynamic method is used here to analyse the effect of van der Waals forces on the mechanical behaviour and strength and toughness properties of three-dimensional nanofibre networks under imposed stretch deformation. The peridynamic formulation allows for a natural inclusion of long-range forces (such as van der Waals forces) by considering all interactions as ‘long-range’. We use van der Waals interactions only between different fibres and do not need to model individual atoms. Fracture is introduced at the microstructural (peridynamic bond) level for the microelastic type bonds, while van der Waals bonds can reform at any time. We conduct statistical …

Crack Nucleation In A Peridynamic Solid, S. Silling, O. Weckner, E. Askari, Florin Bobaru

Florin Bobaru Ph.D.

A condition for the emergence of a discontinuity in an elastic peridynamic body is proposed, resulting in a material stability condition for crack nucleation. The condition is derived by determining whether a small discontinuity in displacement, superposed on a possibly large deformation, grows over time. Stability is shown to be determined by the sign of the eigenvalues of a tensor field that depends only on the linearized material properties. This condition for nucleation of a discontinuity in displacement can be interpreted in terms of the dynamic stability of plane waves with very short wavelength. A numerical example illustrates that cracks …

Studies Of Dynamic Crack Propagation And Crack Branching With Peridynamics, Youn Doh Ha Ph.D., Florin Bobaru Ph.D.

Florin Bobaru Ph.D.

In this paper we discuss the peridynamic analysis of dynamic crack branching in brittle materials and show results of convergence studies under uniform grid refinement (m-convergence) and under decreasing the peridynamic horizon (δ-convergence). Comparisons with experimentally obtained values are made for the crack-tip propagation speed with three different peridynamic horizons.We also analyze the influence of the particular shape of themicro-modulus function and of different materials (Duran 50 glass and soda-lime glass) on the crack propagation behavior. We show that the peridynamic solution for this problem captures all the main features, observed experimentally, of dynamic crack propagation and branching, as well …

Breaking The Theft-Chain-Cycle: Property Marking As A Defensive Tool, William J. Bailey, David J. Brooks

Bill Bailey

The theft of property and its associated impact effects many parts of society. For example, a considerable amount of resources are expended in trying to reduce property theft, as such crime engenders both a financial and emotional impact (Grabosky, 1995, p. 1) on those involved. Factors such as fear of crime, increased insurance premiums and victimization are all outcomes of property crime. Much of the past research has focused on the mitigation of such crimes, collectively termed as ‘crime prevention’. Crime prevention are “any actions designed to reduce the actual level of crime and/or the perceived crime” (S.P. Lab, 2010, …

Experimental Verification Of The Linear Relationship Between Stress And The Reciprocal Of The Peak Barkhausen Voltage In Astm A36 Steel, Orfeas Kypris, Ikenna Nlebedim, David Jiles

Orfeas Kypris

This study presents an experimental validation of a model theory for determining the relationship between a nondestructive measurement parameter and a property of interest. It was found that the reciprocal of the peak envelope amplitude of the Barkhausen emission voltage follows a linear relationship with stress. A linear relationship between stress and the reciprocal of the root mean square voltage was also obtained. These observations represent an important step towards improving the use of Barkhausen signals for magnetic non-destructive evaluation of stress as a function of depth in ferromagnetic load bearing structures.

On The Derivation Of Boundary Conditions From The Global Principles Of Continuum Mechanics, Gerald G. Kleinstein

Gerald G. Kleinstein

We consider the motion of a fluid exterior to a moving rigid obstacle, or interior to a moving rigid shell. The boundary conditions, such as the no-slip condition and the condition of an isothermal wall, applied in the solution of the system of differential equations describing these motions, are currently assumed to be an approximation derived from experimental observation rather than an exact law. It is the purpose of this paper to show that the boundary conditions at a material interface between a fluid and a solid are derivable from the global principles of balance of continuum mechanics and the …

Reverse Logic - Safety Of Spent Nuclear Fuel Disposal, Antti Lempinen, Marianne Silvan-Lempinen

Antti Lempinen

No abstract provided.

A Time-Resolved Method For Nonlinear Ultrasonic Measurements, Stephen D. Holland, Wolfgang Sachse

Stephen D. Holland

We describe a time-resolved method for measuring nonlinear ultrasonic phenomena. Current approaches rely on a narrowband measurement of harmonic generation to identify and characterize nonlinearity. Concomitant with these techniques is poor time resolution. We address this limitation with a hybrid narrowband/broadband approach that provides simultaneous time resolution and harmonic isolation for the measurement of weak nonlinearites. We discuss applications and present demonstrative results showing harmonic generation both in water and at a dry contact aluminum-aluminum interface.

Determination Of Plate Source, Detector Separation From One Signal, Stephen D. Holland, Tadej Kosel, Richard Weaver, Wolfgang Sachse

Stephen D. Holland

We address the problem of locating a transient source, such as an acoustic emission source, in a plate. We apply time-frequency analysis to the signals detected at a receiver. These highly dispersive and complex waveforms are measured for source-receiver separations ranging from 40 to 180 plate thicknesses and at frequencies such that ten to twenty Rayleigh-Lamb branches are included. Re-assigned, smoothed, pseudo-Wigner-Ville distributions are generated that exhibit the expected sharp ridges in the time-frequency plane, lying along the predicted frequency-time-of-arrival relations. The source-receiver separation can be determined from such plots.

Ultrasonic Nondestructive Evaluation Of Fibre-Reinforced Composite Materials - A Review, Vikram K. Kinra, Vinay Dayal

Vinay Dayal

This paper reviews various ultrasonic nondestructive evaluation techniques applicable to fibre-reinforced composites. The techniques are briefly described and key references are cited. Methods to evaluate the reduced stiffness of composites due to micro-damage are described. Results show that for composites through-the-thickness attenuation increases and stiffness does not change due to transverse cracks, but in-plane stiffness and attenuation changes are substantial and can be measured by the Lamb wave techniques.