Engineering Commons^™

Parametric Bicycle Yoke, Colin Reay, Walter Minehart, Robby Harrigan, Jordan Olson

Mechanical Engineering

This report outlines the entire design, fabrication, and validation process of a parametric yoke design that addresses the packaging problem of the bottom-bracket chainstay junction in modern bicycle frames. The goal was to create an elegant, space-efficient solution that is accessible to the Cal Poly Bike Builders Club. The report includes documentation of the three-part fixture system, manufacturing process, and testing results for the yoke.

Our yoke design outperforms traditional round-tube weldments in torsional and vertical stiffness. Additionally, all manufacturing fixtures and machining operations function as intended, resulting in a finished yoke that meets all required tolerances in under an …

Adjustable Head Tube Angle Headset, Glenn Petersen, Ben Harper, Josh Martin, Dylan Prins

Mechanical Engineering

This final design review report describes the design, manufacture, and test process of a bicycle headset capable of quickly and easily adjusting the effective head tube angle. The evolution of mountain bike geometry has forced bike designers to compromise between climbing and descending performance when choosing a head tube angle. A headset capable of quickly adjusting the effective head tube angle would allow riders to optimize their bike’s geometry for different stages of riding. This report details the research, idea generation, concept development and selection, design, manufacturing, and testing of our adjustable head tube angle headset.

Fluid Power Vehicle Challenge - The Incompressibles - Final Design Report, Nicholas Gholdoian, Russell Posin, David Vitt, Alex Knickerbocker, Kyle Franck, Julian Rodkiewicz

Mechanical Engineering

This report provides a comprehensive description of the research, analysis and design work that The Incompressibles have completed thus far in the senior project process. This document includes all the work that The Incompressibles have completed for the team’s Preliminary Design Review (PDR), Critical Design Review (CDR), the work leading up to the 2019 FPVC competiton and the competition results. This report includes the initial research that the team completed for the fluid power competition, first iterations of designs, final iterations of designs, manufacturing results and processes, and finally testing and results from competition. With a new design for the …

Human Powered Vehicle Trainer, Nicholas Hung Nguyen, Gregory Reece Bridges, Jacinta Garcia, Mitchell Sidney Smith

Mechanical Engineering

This Final Design Review (FDR) document describes the final design and completed prototype of a Mechanical Engineering senior project team at California Polytechnic State University, San Luis Obispo. The project goal is to create an adjustable human powered vehicle training bike for George Leone that allows a rider to gain confidence with the unique reclined bike geometry ahead of the World Human Powered Speed Challenge at Battle Mountain, Nevada. This document outlines the customer’s needs and technical research performed which together determine the project’s scope and engineering specifications. Next, we present the initial idea generation process and its results, along …

Single Arm Recumbent Bicycle, Alexander Borsotti, Ryan Westermann, Sean Liston

Mechanical Engineering

The goal of this report is to outline and cover the scope of work for the Single Arm Recumbent Bicycle Senior Project. The report will give an introduction of the problem, a background of the existing research or products relating to our project, the objectives of our project, our project management plan, our final design, manufacturing, testing, our project management, and final recommendations for improving the final design. The team is being supported by the Quality of Life Program, a non-profit organization that works to improve the lives of those injured in duty while serving our nation.

Up until now, …

Team Joseph's Bike Trailer, Keely Thompson, Curtis Wathne, Ryan Meinhardt

Mechanical Engineering

This final design report shows the results of this senior project’s design process of creating a custom bike trailer for Team Joseph. As done in the Scope of Work, Preliminary Design report, and Critical Design report, current products, relevant technologies, and American Society for Testing and Materials (ASTM) standards are fully researched and benchmarked to aid in the design selection process. Customer requirements are looked at and developed into engineering specifications. A detailed design was created for CDR to show to Team Joseph, and manufacturing and testing plans were laid out. This final design report adds the final design revisions …

Pedal-Powered Drivetrain System, Geremy J. Patterson, Callaghan Fenerty, Bradley Welch

Mechanical Engineering

No abstract provided.

Design Of An Automated Vehicle Detection System For Bicycles: Fireworks Cycling Sensor, Jason Cheng, Peter Kim, Tory Morgan, Clayton Young

Industrial and Manufacturing Engineering

Abstract

This report explores the necessity for increased cyclist safety in urban settings, leading to the birth of a product which aims to drastically reduce the risk of accidents while heightening the sense of safety overall. The project outlines and details the product development process of a consumer-friendly vehicle detection system, with a holistic scope which includes technical rapid prototyping and coding, team dynamics, decision making process, and change management. Two formal prototypes were developed before a functional final product was identified and constructed, each iteration drastically improving practicality and efficiency of detection. The final product underwent extensive testing in …

Parker Hannifin Chainless Challenge 2014-15 Senior Design Project, Matt Pallotta, Nathan Klammer, Kemper Whaley, Jack Rechtin

Mechanical Engineering

California Polytechnic State University has been invited to compete in the Parker Hannifin Chainless Challenge Competition in 2014-15. Cal Poly has chosen a team of mechanical engineering students to take part. We have named our team “Bike Under Pressure” and all references as such refer to the team.

The challenge is to build a bicycle which does not have a solid mechanical connection between the power input of the rider to the power output of the wheel(s). After conducting research into different previous designs and brainstorming designs of their own, Bike Under Pressure developed two conceptual designs. One design featured …

Bikeshare Business Model For Cal Poly- San Luis Obispo, Justin Benson, Andrew Neil Gatchalian

Industrial and Manufacturing Engineering

With the increasing admittance of students into colleges and universities across the nation, the need for alternate modes of transportation is becoming more pressing. College and university campuses, as well as small cities, in which there is a college or university, are being overloaded with student cars. In San Luis Obispo specifically, parking on campus as well as downtown can be extremely difficult to find. Traffic is also getting progressively worse, especially at the hour when class begins/ends and student arrive to or leave campus. Financial reasons are yet another deterrent for students at Cal Poly. Parking permits, gas, and …

Loaded Shift Tester Sram, Nick Cox, Sam Shaffer, Michael Polka

Mechanical Engineering

This report details the design, manufacturing, and testing of a loaded shift tester for the SRAM Bicycle Corporation. The machine is used to perform developmental and qualification tests on various bicycle drivetrain components. Using SolidWorks, the design team created a solid model of the machine on the computer, then ordered and manufactured the parts required to build it. The machine was tested to ensure that all the parts worked together, and was finally delivered to SRAM when it was deemed ready.

Bicycle Wheel Test Machine, Dylan Harper, Kevin Hom, Ross Williams

Mechanical Engineering

In recent years, the cycling industry has witnessed huge advancements in bicycle components and materials. The age old goals of speed and low weight are still present today, but the pursuit of these goals may be reducing the structural stability of various components integral to wheel performance, including the wheel hub bearings. These bearings are invaluable to bicycles but little is known about how the forces and loads applied to a bicycle affect the performance of these bearings. Broken axles and hubs are indicators of significant stresses within the hub, but little is known about how the resulting deformation affects …