Engineering Commons^™

Long-Range Aceo Phenomena In Microfluidic Channel, Diganta Dutta, Keifer Smith, Xavier Palmer

Electrical & Computer Engineering Faculty Publications

Microfluidic devices are increasingly utilized in numerous industries, including that of medicine, for their abilities to pump and mix fluid at a microscale. Within these devices, microchannels paired with microelectrodes enable the mixing and transportation of ionized fluid. The ionization process charges the microchannel and manipulates the fluid with an electric field. Although complex in operation at the microscale, microchannels within microfluidic devices are easy to produce and economical. This paper uses simulations to convey helpful insights into the analysis of electrokinetic microfluidic device phenomena. The simulations in this paper use the Navier–Stokes and Poisson Nernst–Planck equations solved using COMSOL …

Generation Of Large-Volume High-Pressure Plasma By Spatiotemporal Control Of Space Charge, Shirshak K. Dhali

Electrical & Computer Engineering Faculty Publications

Any attempt to scale pressure and volume of nonthermal plasma usually leads to instabilities due to the formation of localized space charge. The control of the plasma is limited by the discharge geometry, type of excitation, and gas composition. This article explores the possibility of controlling the space charge in a discharge with a spatially and temporally varying electric field. It is shown that a phase-staggered sinusoidal excitation to a set of conformal azimuthal electrodes in a cylindrical geometry leads to a traveling electric field. Simulations show that in space charge dominated transport, the charged species are dispersed both in …

Supercapacitors With Gate Electrodes, Tazima Selim Chowdhury

Dissertations

A new approach to improve the capacitance of supercapacitors (SC) is proposed in this study. A typical SC is composed of an anode and a cathode; a separator in between them assures an unintentional discharge of the capacitor. The study focuses on a family of structured separators, either electronically active or passive which are called gates. An active structured separator layer has been fabricated and analyzed. The structured separator has characteristics of electrical diode and is fabricated out of functionalized carbon nanotubes (CNT). Improvement of the overall capacitance of SC, equipped with either active or passive structured separators demonstrated a …

The Ph Sensing Properties Of Rf Sputtered Ruo2 Thin-Film Prepared Using Different Ar/O2 Flow Ratio, Ali Sardarinejad, Devendra Kumar Maurya, Kamal Alameh

Research outputs 2014 to 2021

The influence of the Ar/O₂ gas ratio during radio frequency (RF) sputtering of the RuO₂ sensing electrode on the pH sensing performance is investigated. The developed pH sensor consists in an RF sputtered ruthenium oxide thin-film sensing electrode, in conjunction with an electroplated Ag/AgCl reference electrode. The performance and characterization of the developed pH sensors in terms of sensitivity, response time, stability, reversibility, and hysteresis are investigated. Experimental results show that the pH sensor exhibits super-Nernstian slopes in the range of 64.33-73.83 mV/pH for Ar/O₂ gas ratio between 10/0-7/3. In particular, the best pH sensing performance, in …

Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci

Sivasubramanian Somu

Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.

Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci

Ahmed A. Busnaina

Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.

Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci

Mehmet R. Dokmeci

Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.

Titanium Nitride As An Electrode Material For High Charge Density Applications, Mustafa Khan Patan

Theses

Present day neural prostheses require electrodes with high current densities. Traditional electrodes are not capable of delivering such high current densities. Titanium nitride as an electrode material and other techniques like reactive ion etching, platinization of titanium were studied in this thesis towards improving charge density of electrodes.

Titanium nitride (TiN) was sputtered in a custom designed pattern of electrodes with silicon as substrate, at a deposition rate of 2 A /sec. Atomic Force Microscopy (AFM) analysis of TiN film showed a smooth surface for a film thickness of 1 μm. X-Ray Diffraction (XRD) analysis of the film showed the …

High Discharge Rate Characteristics Of Nickel-Cadmium Batteries For Pulse Load Filtering, Gregory M. Gearing, Michael B. Cimino, David H. Fritts, John F. Leonard, Anthony J. Terzuoli Jr.

Faculty Publications

Several tests of specially fabricated nickel-cadmium batteries having circular disk type electrodes were considered. These batteries were evaluated as filter elements between a constant current power supply and a five hertz pulsed load demanding approximately twice the power supply current during the load on portion of the cycle. Short tests lasting 10,000 cycles were conducted at up to a 21 C rate and an equivalent energy density of over 40 Joules per pound. In addition, two batteries were subjected to 10⁷ charge/discharge cycles, one at a 6.5 C rate and the other at a 13 C rate. Assuming an …