Engineering Commons^™

Circuit Breaker Failure Analysis System, Marlie Norbrun

Honors Theses

Norbrun, Marlie Circuit Breaker Failure Analysis System. Electrical, Computer, and Biomedical Engineering Department, June 2021.

ADVISOR: Professor James Hedrick

Electrical malfunctions are one of the leading causes of domestic fires in the United States. Between 2012 and 2016, electrical failures were responsible for 44, 860 residential fires (Richard Campbell, “Home Electrical Fires”). All electrical circuits contain circuit breakers, which are used as safety mechanisms to interrupt current flow when a fault develops. It is not always possible to determine if an electrical fire resulted from a circuit breaker malfunction. Thus, it would be beneficial to have a cost-effective and user-friendly …

Radar Network Synchronization And Imaging Using Semiconductor Laser System, Meesha Gupta

Honors Theses

The purpose of this project is to report the software implementation of radar network synchronization and imaging using a semiconductor laser system. We compare different radar configurations and methods to generate laser chaos.

The monostatic radar configuration has limited capabilities of detecting targets with low radar cross-sections. This configuration is also vulnerable to intentional interference. In contrast, a radar network where multiple radar transceivers (nodes) are placed strategically can yield superior detection. This radar network can also extract additional information about the target, such as its size and shape. However, synchronizing the nodes in the radar network poses a significant …

An Open-Baffle Motional Feedback Loudspeaker, Matthew Quinlivan, William Harvie

Honors Theses

A dynamic loudspeaker mounted in an open baffle has the same parameters as a loudspeaker in free space. A subwoofer mounted in an open baffle has a small total quality factor and therefore the frequency above which the driver has a significant output is too high despite the subwoofer's low resonant frequency. To address this issue, we implemented a motional feedback circuit with the goal of introducing both velocity feedback and acceleration feedback into the loudspeaker system and thus altering the resonant frequency and total quality factor of the system. After verifying the efficacy of our feedback circuit with computer …

Coffee Can Radar System, Dale Coker

Honors Theses

A Radio Detection and Ranging (“radar”) system detects a target and accurately determines its range and velocity using radio frequency (RF) waves. In the presence of a target, these RF waves are reflected, received, and processed. Until recently, radar systems have been too expensive to implement as undergraduate research projects, primarily because of the cost of the associated RF components. Recently, MIT has developed a low-cost radar system as part of an open-source course. Therefore, one objective of this project is to design and construct a radar system based on the MIT design. A further objective is to develop a …

Heel Down And Toe-Off Time Measured With Ultrasonic Doppler System And Force Plate Sensor, Sabin Timsina

Honors Theses

Collie Box is a medical device that measures the gait parameters of the person walk- ing in front of it. This device uses the Ultrasonic Doppler system to extract the heel-contact and toe-off times of a person walking within the range of 2-10 meters. These times are used to determine the leg’s swing phase and double stance times. The ultrasonic transducer of 10mm diameter is driven at 40kHz. At the time of the heel-contact and toe-off, foot velocity is zero while the torso part of the human body is still in motion. The wide directivity of 10mm diameter ultrasonic transducer …

Ece Senior Design Project - Cost-Effective Diy Electrometer, Benjamin Hahn

Honors Theses

An electrometer is a critical electrophysiology instrument used to generate minuscule currents for intracellular stimulation of biological neurons. An electrometer also enables simultaneous measurement of the neuron membrane voltage response. This device is necessary to perform accurate stimulation of neurons. However, the cost of commercial electrometers, around $5000, is prohibitive to many researchers, particularly at the high-school or introductory college level. A recent Western Michigan University graduate student, Lucas Essenburg, designed a basic electrometer for $210. His thesis proved that quality electrometers can be constructed for a fraction of the price of commercial-grade equipment.

This project focused on the improvement …

Designing A Low-Cost Ultrasound Pulser, Andrea Huey

Honors Theses

Ultrasound imaging allows for those studying living beings to see inside a subject without causing it harm. This allows for real-time images to be taken, leading to ease of observational research. However, while this technology is beneficial to those who utilize it, the devices used to create and receive ultrasound pulses can be incredibly complex, allowing for precise adjustment of the output signal and various other functions, and therefore expensive. The focus of this senior project is the design of a low-cost pulser for use with an ultrasound transducer. While it does not have all the high-level functions of the …

Development Of A Fully Instrumented, Resonant Tensegrity Strut, Kentaro Barhydt

Honors Theses

A tensegrity is a structure composed of a series of rigid members connected in static equilibrium by tensile elements. A vibrating tensegrity robot is an underactuated system in which a set of its struts are vibrated at certain frequency combinations to achieve various locomotive gaits. Evolutionary robotics research lead by Professor John Rieffel focuses on exploiting the complex dynamics of tensegrity structures to control locomotion in vibrating tensegrity robots by finding desired gaits using genetic algorithms. A current hypothesis of interest is that the optimal locomotive gaits of a vibrating tensegrity exist at its resonant frequencies.

In order to observe …

Music Keyboard Based On Flexible Hybrid Electronics, Anthony Hanson

Honors Theses

With the idea of creating a product using flexible hybrid electronics, the group decided to create a musical keyboard like a synthesizer. This is implemented using a printing technique called screen printing. This allowed the group to make several copies of the same sensors with a consistent thickness, roughness, and size. These keys, made of silver, are used as capacitive proximity sensors. When another conductive material comes within range of the key to change the polled capacitance by 2.7 pF, the note corresponding with that key is outputted.

In the interest of making this project a useful tool for someone …

Sensory Interfaces: Intelligent Surgical Box Trainer, Krystal York

Honors Theses

The Fundamentals of Laparoscopic Surgery (FLS) box trainer currently offers medical students the opportunity to practice their dexterity with laparoscopic surgical tools and accustom themselves to the disconnect between their actions and their visible frame of reference. However, at this stage the box trainer offers few ways to test, practice, or improve upon important factors in laparoscopic surgery including disturbance of and pressure applied to patient tissue. The purpose of this project was to add sensory interfaces to the FLS box trainer to offer more concrete feedback for medical students practicing the required tasks, consolidate the information gathered by the …

An Internet Of Things (Iot) Robotic Light Switch, Arsal Habib

Honors Theses

The purpose of this project was to design and build an Internet of Things (IoT) Robotic Light Switch. This light switch would act as a complementary device to existing toggle switches and equip them with typical smart device features such as remote control (via Wi-Fi), digital voice assistant control, motion-sensing and integration with other smart home solutions (such as IFTTT). All these features would be supported by a dedicated web page that would also be able to view the usage statistics of the device. This device is aimed at offering users an extremely easy-to-install home automation solution that needs no …

The Evolution Dynamics And Trends Of The Content Of Chinese Exports From 1995-2011, Megan Kerbs

Honors Theses

There is no question that China’s role in the international economy has grown over time, as it seems to be claiming more and more of center stage in the global arena. Back in the early 1990’s, the phenomenon of globalization enabled China to expand its reach, inserting itself into intricate production hierarchies that began to define the global marketplace. China experienced a massive export boom in 2000, and since, has evolved to become a highly sophisticated, high-tech country that now plays an integral role within not only the East Asian region, but also the rest of the world. This thesis …

Automated Data Acquisition Of Deet Time-Dependent Concentration Profiles, Ryan D. Coleman

Honors Theses

Spatial insect repellents must maintain a sufficient concentration in the vapor phase to successfully deter pests. However, little is known regarding correlation of concentration to efficacy nor does there exist a standard testing protocol to measure efficacy in air. Among existing spatial repellents, DEET is the most common active ingredient. This research focuses on application of sensor-based technologies to monitor the concentration levels of DEET under static conditions.

Metal oxide semiconductor sensors feature conductivity variance in response to absorption and desorption of volatile organic compounds. Advantages of these sensors include cost, versatility, and sensitivity. Metal oxide semiconductor sensors were chosen …

Solar Tracking And Lighting Design For A Multimedia Sculpture, Alexandra Ferguson

Honors Theses

A lighting system utilizing solar energy was built to illuminate a wireframe multimedia sculpture. Increased power generation from the solar cells was achieved using a solar tracking mechanism. Color-selectable light emitting diodes were used to provide the user with unlimited customization options. A digital control system was designed using an Arduino® microcontroller to configure the color of the lights and the positioning of the solar panel. The sculpture will create a sense of community and sustainability among students at the school.

Industrial Wireless Communication System For Notification, Jolica Dias, Devin Semrau, Jumana Abukabbos

Honors Theses

An industrial wireless communication system for short structured messages was needed to support lean manufacturing environments. While first generation prototypes of end devices were previously constructed for the network, it lacked the range, robustness and battery operation desired. The advances made in the new system incorporate multiple small rechargeable user modules that communicate with and through one or more higher powered fixed location message router stations. This configuration ensures that wireless signal integrity is maintained throughout an industrial facility, and that the messages are successfully sent and received. XBee wireless transceivers were imbedded onto the router to enable communication between …

Plug-In Hybrid Vehicle (Phev) Component Pre-Heater, Ria Pereira

Honors Theses

In plug-in hybrid electric vehicles, the optimum temperatures of the cabin and various fluids are achieved through the dissipating heat of the internal combustion engine. In colder climates the initial warm-up of components requires the internal combustion engine to run causing unnecessary consumption of fuel. This project improved the pre-heating system formerly in place. It uses a variety of electric heaters along with the positive temperature coefficient (PTC) heater and blower motor already installed on the vehicle. A system utilizing a microcontroller turns the heaters on and off based on the inputs from the temperature sensors installed on the vehicle. …

A Gps Enabled Ipod Touch For Skiers, Camila Dorin

Honors Theses

The purpose of my senior project was to design and build a system that provides GPS capabilities to the iPod touch. The system is used in conjunction with an iPod application, giving skiers the possibility to have access to the following outputs: graph of speed during run, distance skied, calories burned, and map of the slopes followed. The system consists of a GPS receiver, an Arduino microcontroller, a Wifi Shield, and iPod touch, and an iPod application. A central point during the development of the system was the transmission of data from one piece of hardware to the other and …