Engineering Commons^™

Esd Events To Wearable Medical Devices In Healthcare Environments—Part 1: Current Measurements, Mehdi Kohani, Javad Meiguni, David J. Pommerenke, Michael G. Pecht

Electrical and Computer Engineering Faculty Research & Creative Works

Wearable medical devices are widely used for monitoring and treatment of patients. Electrostatic discharge can render these devices unreliable and cause a temporary or permanent disturbance in their operation. In a healthcare environment, severe electrostatic discharge (ESD) can occur while a patient, lying down or sitting on a hospital bed with a wearable device, discharges the device via a grounded bedframe. To protect the devices from ESD damage, the worst-case discharge conditions in the usage environment need to be identified. Previous studies by authors revealed that such events could be more severe than the conventional human metal model (HMM). However, …

Properties Of Matter, Mike Jackson, Holly Haney

High School Lesson Plans

Students will investigate the relationship(s) between thermal and electrical properties of matter. First, students will use a multimeter and temperature probe to investigate the relationship between electrical resistance and temperature of an electrical resistor composed of metals. They will then graph collected data to analyze the relationship and draw a conclusion as to their relationship. They will then perform the same investigation on a thermal resistor made of a semiconducting substance and analyze that collected data. Finally, using ClaimEvidence-Reasoning (CER) structure, students will use their experimental evidence to state the similarities and differences between the electro-thermal properties of metals and …

Quantitative Analysis Of X-Ray Fluorescence Absorption And Emission For Thickness Determination Of Ald-Grown Metal And Oxide Nanoscaled Films, Tarek M. Abdel-Fattah, Alex Wixtrom, Larry Arias, Kai Zhang, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

This study describes the use of X-ray fluorescence spectroscopy (XRF) to determine the thickness of nanoscaled thin films of insulating oxides such as Al₂O₃, HfO₂, and ZrO₂, semiconducting oxides such as TiO₂, ZnO, and metals like Pt, on silicon substrates synthesized by atomic layer deposition (ALD) technology. XRF thickness measurements were compared with the predicted layer thickness based on calculations from known ALD growth rates for each metal or metal oxide films. The ALD growth rates have been calibrated with TEM cross-sectional measurements of the resulting film thickness. The results …

Tunable Optical Nanocavity Of Iron-Garnet With A Buried Metal Layer, Alexey N. Kuz'michev, Lars E. Kreilkamp, Mohammed Nur-E-Alam, Evgeni Bezus, Mikhail Vasilev, Iliya A. Akimov, Kamal Alameh, Manfred Bayer, Vladimir I. Belotelov

Research outputs 2014 to 2021

We report on the fabrication and characterization of a novel magnetophotonic structure designed as iron garnet based magneto-optical nanoresonator cavity constrained by two noble metal mirrors. Since the iron garnet layer requires annealing at high temperatures, the fabrication process can be rather challenging. Special approaches for the protection of metal layers against oxidation and morphological changes along with a special plasma-assisted polishing of the iron garnet layer surface were used to achieve a 10-fold enhancement of the Faraday rotation angle (up to 10.8°=μm) within a special resonance peak of 12 nm (FWHM) linewidth at a wavelength of 772 nm, in …

The Ph Sensing Properties Of Rf Sputtered Ruo2 Thin-Film Prepared Using Different Ar/O2 Flow Ratio, Ali Sardarinejad, Devendra Kumar Maurya, Kamal Alameh

Research outputs 2014 to 2021

The influence of the Ar/O₂ gas ratio during radio frequency (RF) sputtering of the RuO₂ sensing electrode on the pH sensing performance is investigated. The developed pH sensor consists in an RF sputtered ruthenium oxide thin-film sensing electrode, in conjunction with an electroplated Ag/AgCl reference electrode. The performance and characterization of the developed pH sensors in terms of sensitivity, response time, stability, reversibility, and hysteresis are investigated. Experimental results show that the pH sensor exhibits super-Nernstian slopes in the range of 64.33-73.83 mV/pH for Ar/O₂ gas ratio between 10/0-7/3. In particular, the best pH sensing performance, in …

Relaxation Mechanism For Ordered Magnetic Materials, C. Vittoria, S. D. Yoon, A. Widom

Carmine Vittoria

We have formulated a relaxation mechanism for ferrites and ferromagnets (insulators and metals) whereby the coupling between the magnetic motion and lattice is based purely on continuum arguments concerning magnetostriction. This theoretical approach contrasts with previous mechanisms based on microscopic formulations of spin-phonon interactions employing a discrete lattice. Our model explains the scaling of the intrinsic ferromagnetic resonance linewidth with frequency, with temperature { ∝1/Ms(T)} and the anisotropic nature of magnetic relaxation in ordered magnetic materials. Here, Ms(T) is the thermal saturation magnetization. Without introducing adjustable parameters, our model is in reasonable quantitative agreement with experimental measurements of the intrinsic …

Binary Classification Of An Unknown Object Through Atmospheric Turbulence Using A Polarimetric Blind-Deconvolution Algorithm Augmented With Adaptive Degree Of Linear Polarization Priors, Mu J. Kim

Theses and Dissertations

This research develops an enhanced material-classification algorithm to discriminate between metals and dielectrics using passive polarimetric imagery degraded by atmospheric turbulence. To improve the performance of the existing technique for near-normal collection geometries, the proposed algorithm adaptively updates the degree of linear polarization (DoLP) priors as more information becomes available about the scene. Three adaptive approaches are presented. The higher-order super-Gaussian method fits the distribution of DoLP estimates with a sum of two super-Gaussian functions to update the priors. The Gaussian method computes the classification threshold value, from which the priors are updated, by fitting the distribution of DoLP estimates …

Multi-Physics Modeling Of Induction-Based Additive Manufacturing Of Metals, Danny W. Muse

Open Access Theses & Dissertations

The shift towards 3D printing of functional products has provided a glimpse of the future in terms of manufacturing technologies and the creation of volumetrically complex structures made possible only through these technologies. 3D printing has emerged from the culmination of several technologies covering multiple industries and a myriad of materials. Unlike subtractive technologies such as mills, lathes and CNC machines, where material is removed from a bulk slab or billet to produce a desired part, 3D printing uses an additive layered approach to deposit material based on cross sections of the desired part. Both approaches produce parts based on …

Nano-Electromechanical Zero-Dimensional Freestanding Nanogap Actuator, Jun Hyun Han, Norimasa Yoshimizu, T.J. Cheng, Michael Ziwisky, S.A. Bhave, A. Lal, Chung-Hoon Lee

Electrical and Computer Engineering Faculty Research and Publications

Micromachined free standing nanogap with metal electrodes is presented. The gap size is as small as 17 nm, and can be reduced further with electrostatic or piezoelectric actuation. The nanoscale gap is fabricated by industrial standard optical lithography and anisotropic wet chemical Si etching. Electron transport between the metal electrodes with optical stimulus enhancing photon-electron coupling (plasmon) is presented.

Study Of Non-Equilibrium Electron Dynamics In Metals, Wael Mohamed Gomaa Ibrahim

Electrical & Computer Engineering Theses & Dissertations

Thermal phenomena, such as heat propagation, lattice melting, and ablation, are the result of energy deposition in metals. A fundamental understanding of the electron dynamics leading to these thermal phenomena would benefit many laser applications, such as laser deposition of thin films and laser processing.

In this work, thin metal films were prepared using the resistive heating evaporation technique. High dynamic range autocorrelators were constructed to characterize the different laser systems used in this study. The nonequilibrium electron dynamics in single layer gold films, multi-layer gold-vanadium, and gold-titanium films were studied. The time evolution of the electron temperature was monitored …

Detecting Stress And Fatigue Cracks, Christian J. Huber, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

Discoveries in using open ended rectangular waveguides for microwave surface crack detection and sizing have generated interest. The foundation, potential, advantages and disadvantages of this methodology, developed at the Applied Microwave Nondestructive Testing Laboratory in the Electrical Engineering Department at Colorado State University, are discussed. Microwave techniques in general and this particular approach offer certain unique advantages that can advance the state of the art of fatigue/surface crack detection. The basic features and capabilities of this technique have been theoretically and experimentally investigated these past few years. However, more developmental work is needed to bring this technique from the laboratory …

Measurement Parameter Optimization For Surface Crack Detection In Metals Using An Open-Ended Waveguide Probe, R. Zoughi, Stoyan I. Ganchev, Christian J. Huber

Electrical and Computer Engineering Faculty Research & Creative Works

Fatigue and stress induced surface crack detection in metals is an important practical issue. A newly developed microwave inspection approach, using an open-ended rectangular waveguide, has proved to be an effective tool for detecting such cracks. This novel microwave approach overcomes some of the limitations associated with the standard detection methods for surface crack detection. In addition, this approach is applicable to exposed, filled (with a dielectric such as dirt, rust, etc.) and cracks under dielectric coatings such as paint. This paper presents the basic foundation of this surface crack detection methodology along with the ways by which measurement parameters …

A Novel Microwave Method For Detection Of Long Surface Cracks In Metals, Chin-Yung Yeh, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

A novel microwave technique for detecting long surface cracks in metals is described. This technique utilizes an open-ended waveguide to probe the surface of a metal. In the absence of a crack the metal surface is seen as a relatively good short-circuit load. However, in the presence of a crack higher order modes are generated which in turn change the reflection properties at the waveguide aperture. This change brings about a perturbation in the standing wave characteristics which is then probed by a diode detector. The experimental and theoretical foundations of this technique are given, along with several examples. It …