Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Publication
- Publication Type
Articles 1 - 11 of 11
Full-Text Articles in Engineering
Linking Lignin Source With Structural And Electrochemical Properties Of Lignin-Derived Carbon Materials, Wenqi Li, Yan Zhang, Lalitendu Das, Yikai Wang, Mi Li, Namal Wanninayake, Yunqiao Pu, Doo Young Kim, Yang-Tse Cheng, Arthur J. Ragauskas, Jian Shi
Linking Lignin Source With Structural And Electrochemical Properties Of Lignin-Derived Carbon Materials, Wenqi Li, Yan Zhang, Lalitendu Das, Yikai Wang, Mi Li, Namal Wanninayake, Yunqiao Pu, Doo Young Kim, Yang-Tse Cheng, Arthur J. Ragauskas, Jian Shi
Biosystems and Agricultural Engineering Faculty Publications
Valorization of lignin to high-value chemicals and products along with biofuel production is generally acknowledged as a technology platform that could significantly improve the economic viability of biorefinery operations. With a growing demand for electrical energy storage materials, lignin-derived activated carbon (AC) materials have received increasing attention in recent years. However, there is an apparent gap in our understanding of the impact of the lignin precursors (i.e., lignin structure, composition and inter-unit linkages) on the structural and electrochemical properties of the derived ACs. In the present study, lignin-derived ACs were prepared under identical conditions from two different lignin …
Synthesis And Electrochemical Properties Of Li3V2(Bo3)3/C Anode Materials For Lithium-Ion Batteries, You Wang, Yi-Wen Zeng, Xing Zhong, Xing Liu, Quan Tang
Synthesis And Electrochemical Properties Of Li3V2(Bo3)3/C Anode Materials For Lithium-Ion Batteries, You Wang, Yi-Wen Zeng, Xing Zhong, Xing Liu, Quan Tang
Journal of Electrochemistry
The Li3V2(BO3)3/C (LVB/C) composite materials were successfully synthesized in two steps：Firstly, a stoichiomertric mixture of Li2C2O4, V2O5, H3BO3, H2C2O4•H2O and ethanol was thoroughly ball-milled to get the precursors. Secondly, the precursors were post-calcinated to get the ultimate products. The calcination temperatures of 750 ℃, 800 ℃ and 850 ℃ were selected based on TG-DTA analyses. The crystal structures, surface morphologies and carbon contents of the samples calcinated at five conditions, …
Electrochemical Performance Of Crystalline Li12Si7 As Anode Material For Lithium Ion Battery, Ya-Xiong Yang, Rui-Jun Ma, Ming-Xia Gao, Hong-Ge Pan, Yong-Feng Liu
Electrochemical Performance Of Crystalline Li12Si7 As Anode Material For Lithium Ion Battery, Ya-Xiong Yang, Rui-Jun Ma, Ming-Xia Gao, Hong-Ge Pan, Yong-Feng Liu
Journal of Electrochemistry
Crystalline Li12Si7 is successfully synthesized by heating the mixture of LiH and Si with a molar ratio of 12:7, which avoids the huge difference of the melting points between Li and Si. The electrochemical performance and lithium storage mechanism of the as-prepared Li12Si7 are studied in this work. It is found that only a change in cell volume takes place without a phase change during the lithiation/delithiation of Li12Si7 at a voltage range of 0.02 ~ 0.6 V, exhibiting a solid-solution lithium storage mechanism. Such a lithium storage process effectively retards the volume effect …
The Ph Sensing Properties Of Rf Sputtered Ruo2 Thin-Film Prepared Using Different Ar/O2 Flow Ratio, Ali Sardarinejad, Devendra Kumar Maurya, Kamal Alameh
The Ph Sensing Properties Of Rf Sputtered Ruo2 Thin-Film Prepared Using Different Ar/O2 Flow Ratio, Ali Sardarinejad, Devendra Kumar Maurya, Kamal Alameh
Research outputs 2014 to 2021
The influence of the Ar/O2 gas ratio during radio frequency (RF) sputtering of the RuO2 sensing electrode on the pH sensing performance is investigated. The developed pH sensor consists in an RF sputtered ruthenium oxide thin-film sensing electrode, in conjunction with an electroplated Ag/AgCl reference electrode. The performance and characterization of the developed pH sensors in terms of sensitivity, response time, stability, reversibility, and hysteresis are investigated. Experimental results show that the pH sensor exhibits super-Nernstian slopes in the range of 64.33-73.83 mV/pH for Ar/O2 gas ratio between 10/0-7/3. In particular, the best pH sensing performance, in …
Preparation And Electrochemical Properties Of Amorphous Znsno3/C By Hydrothermally Carbonization Method, Guo-Qing Fang, Rui-Xue Zhang, Wei-Wei Liu, Bing-Bo Xia, Hong-Dan Sun, Hai-Bo Wang, Jing-Jing Wu, Shinko Kaneko, De-Cheng Li
Preparation And Electrochemical Properties Of Amorphous Znsno3/C By Hydrothermally Carbonization Method, Guo-Qing Fang, Rui-Xue Zhang, Wei-Wei Liu, Bing-Bo Xia, Hong-Dan Sun, Hai-Bo Wang, Jing-Jing Wu, Shinko Kaneko, De-Cheng Li
Journal of Electrochemistry
The amorphous ZnSnO3@C composite was synthesized via a simple glucose hydrothermal and subsequent carbonization approach. The structure, morphology and electrochemical property of the composite were characterized by XRD, TEM and electrochemical measurements. Compared to bare ZnSnO3, the ZnSnO3/C composite exhibited markedly enhanced lithium storage property and cycle performance, delivering a reversible capacity of 659 mAh·g-1 after 100 cycles at a current density of 100 mA·g-1.
Preparation And Electrochemical Properties Of Flake-Like Liv3O8 By Soft Template Assisted Sol-Gel Method As Anode Material For Aqueous Li-Ion Battery, Shuai Tan, Dan Sun, Hai-Yan Wang, Tian-Li Hou, Zhong-Xing Xiao, You-Gen Tang
Preparation And Electrochemical Properties Of Flake-Like Liv3O8 By Soft Template Assisted Sol-Gel Method As Anode Material For Aqueous Li-Ion Battery, Shuai Tan, Dan Sun, Hai-Yan Wang, Tian-Li Hou, Zhong-Xing Xiao, You-Gen Tang
Journal of Electrochemistry
Anode material has become the key issue for restricting the development of aqueous lithium ion battery (ALIB). Flake-like LiV3O8 materials were synthesized by sol-gel method using sodium dodecyl benzene sulfonate (SDBS) as a template. The XRD and SEM results showed that as-prepared flake-like LiV3O8 was of high purity with monoclinic system and P21/m space group. LiMn2O4//Li2SO4//LiV3O8 ALIB was assembled and tested. As observed, the flake-like LiV3O8 here exhibited good high-rate performance and cycling stability. A high discharge capacity of 154 mAh.g-1 (based on the mass …
The Electrochemical Properties Of Cathode Materials Limxv3-Xo8, Hui Yang, Gang-Gang Zhao, Juan Li
The Electrochemical Properties Of Cathode Materials Limxv3-Xo8, Hui Yang, Gang-Gang Zhao, Juan Li
Journal of Electrochemistry
The cathode material of LiMxV3-xO8 was fabricated by sol-gel method using citric acid as a chelating agent and doping transition metal ions M (Mn, Ti, Co and Ni). The structure, morphology and electrochemical proprieties of the LiMxV3-xO8 samples were investigated by XRD, TGA/DTA, SEM, charge-discharge and CV measurements. The results showed that different calcining temperatures result in different structures and morphologies, which lead to different discharge capacities. The specific discharge capacity of the sample calcined at 500℃ for 6 h was up to 300.4 mAh/g in the first cycle, and the capacity decreased with the increasing of calcining temperature. The …
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo_2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo_2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu
Journal of Electrochemistry
Solid oxide full cell(SOFC) running directly on hydrocarbon fuels has attracted much attention in recent years.In this paper,a dual-layer structure anode was fabricated by tape casting and screen printing method.The addition of a LSCM-CeO2 catalyst layer to the supported anode surface yielded better performance in ethanol fuel.The maximum power density reached 710 and 669 mW/cm2 at 850 ℃ running on hydrogen gas steam and ethanol steam,respectively.No significant degradation in performance has been observed after 216 h of cell testing when the Ni-ScSZ13 anode was exposed to the ethanol steam at 700 ℃.Very little carbon was detected on the anode,suggesting that …
Preparation And Characterizations Of Li_3v_2(Po_4)_3 Cathode Material For Lithium Ion Batteries, Hong Chen, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei
Preparation And Characterizations Of Li_3v_2(Po_4)_3 Cathode Material For Lithium Ion Batteries, Hong Chen, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei
Journal of Electrochemistry
The carbon-coated Li3V2(PO4)3 was prepared by carbothermal reduction method.The structural and morphological properties of the material were studied by X-ray diffraction,FTIR and transmission electron microscopy.The synthesized material was a pure phase of Li3V2(PO4)3,with the particle size of about 100 nm.The values of Li ion diffusion coefficient of the material in the potential window of 3.0 ～ 4.3 V were nearly 3 orders larger than those in 3.0 ～ 4.8 V.In addition,the charge-transfer resistances in 3.0 ～ 4.3 V were much smaller than those in 3.0 ～ 4.8 V,leading to apparent improvement in cycling performance.This was mainly attributed to the smaller …
Preparation And Electrochemical Properties Of Layered Manganese Oxide(Li-Birnessite Type), Xing-Kang Huang, Hai-Tao Chang, Jian-Long Gan, Qing-Shun Zhang, Hong-Jun Yue, Dong-Ping Lv, Yong Yang
Preparation And Electrochemical Properties Of Layered Manganese Oxide(Li-Birnessite Type), Xing-Kang Huang, Hai-Tao Chang, Jian-Long Gan, Qing-Shun Zhang, Hong-Jun Yue, Dong-Ping Lv, Yong Yang
Journal of Electrochemistry
Layered Li-birnessite was prepared by means of oxidizing Mn2+ with O2 gas in alkaline media.The as-prepared sample was characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),BET and thermogravimetric/diffenential thermal analysis(TG/DTA) techniques.The electrochemical properties of the material were also investigated.The results show that such a Li-birnessite consists of well-crystallized spherical particles with an interlayer distance of 0.70 nm.The Li-birnessite delivered a high discharge capacity of 203 mAh/g at a rate of 0.2 C(40 mA/g),and had good rate capability as well.
Electrochemical Properties Of Functionalized Carbon Nanotubes And Their Applications In Analysis Of 6-Mercaptopurine, Bao-Yi Lu, Yan-Yan Lai, Hong Li
Electrochemical Properties Of Functionalized Carbon Nanotubes And Their Applications In Analysis Of 6-Mercaptopurine, Bao-Yi Lu, Yan-Yan Lai, Hong Li
Journal of Electrochemistry
The electrochemical behaviors and adsorption properties of single-walled carbon nanotubes such as SWNT,SWNT-COOH,and SWNT-OH and multi-walled carbon nanotubes including MWNT,MWNT-COOH,and MWNT-OH modified at a graphite electrode have been investigated by using [Fe(CN)6]3-anion and [Co(phen)3]3+ cation.It was shown that shows good redox reversibility of [Fe(CN)6]3-/4-reactions on the existed carbon nanotubes(CNT) modified electrode.Based on the strong adsorptive property of [Co(phen)3]3+ on the CNT surface,the [Co(phen)3]3+/CNT modified graphite electrode can be obtained by progressive potential sweeping and developed to monitor quantitatively 6-mercaptopurine(6-MP).The adsorption capacity of [Co(phen)3]3+ on the multi-walled carbon nanotubes is higher than that of single-walled carbon nanotubes.For the carbon nanotubes with …