Engineering Commons^™

Cost-Effective Diy Electrometer, Emily R. Johnson

Honors Theses

An electrometer is a critical electrophysiology instrument used to generate minuscule currents for intracellular stimulation of biological neurons. An electrometer also enables simultaneous measurement of the neuron membrane voltage response. This device is necessary to perform accurate stimulation of neurons. However, the cost of commercial electrometers, around $5000, is prohibitive to many researchers, particularly at the high-school or introductory college level. A recent Western Michigan University graduate student, Lucas Essenburg, designed a basic electrometer for $210. His thesis proved that quality electrometers can be constructed for a fraction of the price of commercial-grade equipment.

This project focused on the improvement …

Sunseeker Display And Driver Controller, Alec Kwapis

Honors Theses

Digital dashboard displays with critical driver information are found in all modern vehicles. Examples of such information available to the driver include a speedometer, odometer, engine RPM, fuel gauge and more. The current 2016 Sunseeker solar car already has numerous displays that can show critical information to the driver, however, there are several problems that exist. Each display itself is less than two inches in size, the text on the screens is difficult to read, and the measurements have no units. Furthermore, these displays were made by a company that no longer exists, thus preventing the solar car team from …

Ece Senior Design Project - Cost-Effective Diy Electrometer, Benjamin Hahn

Honors Theses

An electrometer is a critical electrophysiology instrument used to generate minuscule currents for intracellular stimulation of biological neurons. An electrometer also enables simultaneous measurement of the neuron membrane voltage response. This device is necessary to perform accurate stimulation of neurons. However, the cost of commercial electrometers, around $5000, is prohibitive to many researchers, particularly at the high-school or introductory college level. A recent Western Michigan University graduate student, Lucas Essenburg, designed a basic electrometer for $210. His thesis proved that quality electrometers can be constructed for a fraction of the price of commercial-grade equipment.

This project focused on the improvement …

Structural Health Monitoring Of Composite Parts: A Review, Jacob Pessin

Honors Theses

Structural health monitoring has the potential to allow composite structures to be more reliable and safer, then by using more traditional damage assessment techniques. Structural health monitoring (SHM) utilizes individual sensor units that are placed throughout the load bearing sections of a structure and gather data that is used for stress analysis and damage detection. Statistical time based algorithms are used to analyze collected data and determine both damage size and probable location from within the structure. While traditional calculations and life span analysis can be done for structures made of isotropic materials such as steel or other metals, composites …

Designing A Low-Cost Ultrasound Pulser, Andrea Huey

Honors Theses

Ultrasound imaging allows for those studying living beings to see inside a subject without causing it harm. This allows for real-time images to be taken, leading to ease of observational research. However, while this technology is beneficial to those who utilize it, the devices used to create and receive ultrasound pulses can be incredibly complex, allowing for precise adjustment of the output signal and various other functions, and therefore expensive. The focus of this senior project is the design of a low-cost pulser for use with an ultrasound transducer. While it does not have all the high-level functions of the …

A Modular Data Acquisition Device And Biosignal Amplifier Design, Erin Bratu

Honors Theses

The purpose of this research project is to revise a previous design of a modular data collection device and to develop a biosignal amplifier for use in EEG research. The primary goals of the device redesign were to address the challenges identified at the conclusion of the previous research and to either reaffirm or update various aspects of the implementation – primarily the main components that make up the device. The amplifier circuitry is designed to provide both amplification of the input signals and preliminary filtering of undesirable noise artifacts caused by common environmental sources. Both the collection device and …

Automated Greenhouse Watering System For Schenectady Arc, Lisa Gu

Honors Theses

All people need to feel useful and able to perform productive jobs. Since 1952, the ARC has strived to provide people with developmental disabilities the resources, services, and support that enable them to advocate and participate within their communities. One way in which the ARC accomplishes this mission is by encouraging people with disabilities to develop skills and hobbies that give them independence and purpose. An integral part of their center is the greenhouse. Individuals at the Maple Ridge Center are responsible for operating the water system to irrigate the plot daily and ensuring that the proper amount of water …

Gesture-Controlled Quadcopter System, Wenhao Yang, Anthony Xu, Kendra Crawford

Honors Theses

According to the statistic given by the National Law Enforcement Officers Memorial Fund, 514 police officers casualties have been attributed to gunfire in the last decade(2008-2017). It is the leading cause of death among police officers and accounts for more than a third of the total 1511 police casualties in the past decade. In this project, we want to provide a safer solution to police officers that are surveying a building for one or multiple potential dangerous personnel. We are working to design and build a gesture-controlled quadcopter that can scout ahead of the officer and provide information about the …

Communication Debugging Platform, Husam Beitello

Honors Theses

More and more products are becoming “connected” devices, integrating multiple communications subsystems into their design. These subsystems increase the complexity of a design, and require extensive testing and debugging before they reach an end user. The purpose of the project was to create a prototype for a peripheral device that enables bidirectional communication between a typical smartphone and another target device communicating using the infrared, Bluetooth, and/or CAN communication protocols. Such a device could then be used to debug the behavior of a product relying on these forms of communication, by running test procedures referred to as scripts from the …

Analysis And Optimization Of A Triple Notch Ultra-Wideband Antenna, Caleb D. Keathley

Honors Theses

This paper analyzes a microstrip fed triple notch band Ultra-Wideband (UWB) antenna designed with an inverted pi slot and a Defected Microstrip Structure (DMS) Band-Stop Filter (BSF) from the design stage to the testing stage. This paper systematically steps through each phase of the antenna from simulation, to fabrication, and finally testing. The results of the simulation and testing phases are both compared to each other before comparing the entire project's results to the source paper's results. After determining the accuracy of the fabricated antenna, the paper discusses future avenues for optimization of an Ultra Wide-Band antenna.

Effects Of The America Invents Act And Recent Supreme Court Decisions On Patent Law, Bridgett Roal

Honors Theses

Due to an interest in pursuing a career in patent law with an electrical engineering background, this thesis describes the 2012 America Invents Act (AIA), which made major changes to patent law in the United States including the switch from “first-to-invent” to “first-to-file” and the creation of the Patent Trial and Appeals Board (PTAB), as well as several relevant key Supreme Court decisions, and explains the impact that these events have caused. Through interviews with attorneys and others in the patent law community, personal research and investigation, and data from the United States Patent and Trademark Office (USPTO), it has …

Tracking Using Fusion Of Multiple Inertial Measurement Units, Jacob Reed Mccall

Honors Theses

The objective of this thesis is to determine the effectiveness of fusing data from multiple inertial measurement units (IMU) to reduce bias and noise with an overall goal of achieving accurate tracking, which is the process of locating a body as it moves in a fixed environment. Every sensor is subject to noise, and each sensor has its own unique set of biases. The thesis presents a systematic overview of the sensors used in this research, which feature linear acceleration, angular acceleration, and a directional sensor, to form an inertial navigation system (INS). Sources of noise and bias that affect …

2018 Ieee Signal Processing Cup: Forensic Camera Model Identification Challenge, Michael Geiger

Honors Theses

The goal of this Senior Capstone Project was to lead Union College’s first ever Signal Processing Cup Team to compete in IEEE’s 2018 Signal Processing Cup Competition. This year’s competition was a forensic camera model identification challenge and was divided into two separate stages of competition: Open Competition and Final Competition. Participation in the Open Competition was open to any teams of undergraduate students, but the Final Competition was only open to the three finalists from Open Competition and is scheduled to be held at ICASSP 2018 in Calgary, Alberta, Canada. Teams that make it to the Final Competition will …

Analysis Of The Properties Of Supercapacitors And Possible Applications For The Technology, Vincent Oliveto

Honors Theses

Supercapacitors have a lot of excellent qualities that would make them a great substitute for batteries when it comes to electrical energy storage systems. Supercapacitors can discharge and charge very rapidly, they have a lifespan in the realm of millions of cycles, and they are much more efficient than batteries. Unfortunately, they cannot hold nearly as much charge as batteries. This paper seeks to further investigate the properties of supercapacitor technology and the best way to exploit these properties with the purpose of integrating them into renewable energy systems. There is currently a lot of research occurring around the world …

Development Of A Fully Instrumented, Resonant Tensegrity Strut, Kentaro Barhydt

Honors Theses

A tensegrity is a structure composed of a series of rigid members connected in static equilibrium by tensile elements. A vibrating tensegrity robot is an underactuated system in which a set of its struts are vibrated at certain frequency combinations to achieve various locomotive gaits. Evolutionary robotics research lead by Professor John Rieffel focuses on exploiting the complex dynamics of tensegrity structures to control locomotion in vibrating tensegrity robots by finding desired gaits using genetic algorithms. A current hypothesis of interest is that the optimal locomotive gaits of a vibrating tensegrity exist at its resonant frequencies.

In order to observe …

The Response Of Fuzzy Electronics To Ionizing Radiation, Simar Singh

Honors Theses

Small satellites such as CubeSats operate under environmental constraints that are outside of typical commercial specifications. Such constraints include the ability to operate over an extended temperature range and during exposure to ionizing radiation. Nevertheless, commercial technologies are being implemented in CubeSat spacecraft because of the low-cost, low-power, and space savings requirements often achievable with advanced microelectronics [1]. Due to flexibility and the ability to handle uncertainty, fuzzy logic is viable for satellite control while meeting the strict design requirements of a CubeSat. This work evaluates the response of fuzzy control logic to ionizing radiation and compares the response to …

Music Keyboard Based On Flexible Hybrid Electronics, Anthony Hanson

Honors Theses

With the idea of creating a product using flexible hybrid electronics, the group decided to create a musical keyboard like a synthesizer. This is implemented using a printing technique called screen printing. This allowed the group to make several copies of the same sensors with a consistent thickness, roughness, and size. These keys, made of silver, are used as capacitive proximity sensors. When another conductive material comes within range of the key to change the polled capacitance by 2.7 pF, the note corresponding with that key is outputted.

In the interest of making this project a useful tool for someone …

Solid State Light Conversion, Jumana Turkistani

Honors Theses

Demand for innovative and energy-efficient technology has increased as an environmentally sustainable society has become priority. Technological development of solid-state light plays a part in meeting that demand. Our research has revealed that LED (Light Emitting Diode) lighting uses less energy and is a more cost effective and environmentally responsible choice than incandescent and fluorescent lighting. Converting from incandescent and fluorescent dominated lighting to LED lighting may be cumbersome but can result in a classroom milieu that is attractive, cost/energy effective, easy to manipulate as well as facilitative to learning. For this project, a small-scale mockup of the light fixtures …

Home Network Protector - Iot Device, Rodrick Rogers, Kranthi Kadaru

Honors Theses

The Internet of Things (IoT) market is projected to grow to more than 80 billion connected devices by the year 2025 [1]. This surge in relevance opens numerous avenues to those with malicious intent to prey on the uninitiated. With the projected growth of IoT devices, this implies a more connected lifestyle for your everyday consumer. As more devices integrate into our daily lives, security of those devices becomes substantially more important. It all starts with the home network. Just as people feel secure from outside dangers from within their home, they should also have the same peace of mind …

Walking Gait Measurement And Gait Parameters Extraction, Chenye Li

Honors Theses

A fourth generation walking gait measurement device has been designed to capture and analyze detailed gait and stride metrics which eventually provides a Fall-Risk Assessment score. Specifically, the device has been modified to fit the residential environment and the elderly consumers which is low-cost, user-friendly, and portable. The gait parameters would be obtained by the on-board gait analysis protocol. Through gait parameters people's falling risk can then be calculated so that people can be alerted to take precautionary measures before falling. Overall, the device has been made and demonstrated having better performance than its previous generations. The on-board gait analyzing …

Design And Analysis Of An Fmri-Compatible Vibrotactile Skin Stimulator, Jacob Skyler Azbell

Honors Theses

The purpose of this research project is to design a multi-purpose fMRI-compatible vibrotactile skin stimulator that can be used in varying felds of research so that a specifc design does not have to be built for each individual application. Throughout this project, several stimulator designs were produced, but the core idea for each was quite similar. In each design, a wire coil was wound on a exible plastic tape former. One point of each coil is fxed, and the opposite point provides stimulation. Each wire coil was placed in a constant magnetic feld, which provided a weaker version of the …

Electronic Dive Mask: A Heads Up Display For Deep Diving, David Fishman

Honors Theses

The top five dangers in diving are marine life, malfunctioning equipment, asphyxiation, pulmonary embolism, and nitrogen narcosis. These risks exist even with the current standards of diving equipment. Most of these risks can be attributed to a lack of information, either due to inattention or because the information is not accessible to the diver. The current solution to these risks are dive computers, wearable devices around the diver's wrist which provides numeric displays of various information. One value the devices do not display is orientation. These devices also have insufficient methods of warning the user. As such a device is …

Implementing Spatial Symmetry In The Tensor Contraction Engine, Kevin Hartline

Honors Theses

No abstract provided.

Sensory Interfaces: Intelligent Surgical Box Trainer, Krystal York

Honors Theses

The Fundamentals of Laparoscopic Surgery (FLS) box trainer currently offers medical students the opportunity to practice their dexterity with laparoscopic surgical tools and accustom themselves to the disconnect between their actions and their visible frame of reference. However, at this stage the box trainer offers few ways to test, practice, or improve upon important factors in laparoscopic surgery including disturbance of and pressure applied to patient tissue. The purpose of this project was to add sensory interfaces to the FLS box trainer to offer more concrete feedback for medical students practicing the required tasks, consolidate the information gathered by the …

Torsion Element Test Bench Design, Trevor Gick

Honors Theses

A test apparatus has been designed to apply a torque to a range of suspension products developed and sold by ROSTA USA Corporation (ROSTA). The products tested here are used in industrial applications, including vibration damping and suspension for industrial machines.

The designed device takes several specifications into account. To withstand the forces applied to it, the structure of this device is created from steel with bracings to support heavily loaded areas. The device is designed with a “sled” type design so that a forklift will be able to move the sled if needed. To apply torque to the elements, …

A Hardware Algorithm For Self-Balancing Binary Search Trees, Joseph Deiermann

Honors Theses

Binary search trees are binary trees with an ordering mechanism that makes the time to search for any given item within the tree is greatly reduced compared to an unordered array of numbers. More specifically, a balanced binary search tree is faster at finding a specific item in the tree than an unbalanced tree. There are several algorithms that can automatically balance a binary search tree. Most of them do this through rotations directly in their respective insert functions. These algorithms are mostly implemented in software. This paper will present a hardware-based algorithm to balance binary search trees. This algorithm …

The Effect On Postural Balance As A Result Of Different Types Of Golf-Specific Footwear Over An Extended Duration, Alice Mcgee

Honors Theses

The sport of golf is increasingly popular within the United States, with an estimated 35 million participants worldwide. To be successful, the golf swing, regarded as a difficult biomechanical motion to accomplish, needs to be accurate and powerful. A proper swing incorporates a weight shift from the rear foot to the leading foot, which indicates that balance is crucial to maintain. The purpose of this study was to examine the effect of golf-specific footwear on static balance over an extended duration in order to relate it to golf performance. Twelve recreationally trained males (age: 23.4±2.2 years; height: 181.5±9.0cm; mass 95.8±18.6 …

A Survey On Research Gaps In Chronic Traumatic Encephalopathy And American Football Players, Thomas Brent Ferguson

Honors Theses

Chronic Traumatic Encephalopathy (CTE) has recently received extensive media coverage, significantly increasing interest in concussions and their relation to the brain disease. As research continues on the disease and the protein Tau that is associated with it, it is imperative to find a correlation between any possible causation other than concussions. All American football players suffer subconcussive impacts, yet only some are diagnosed with the disease, leading most to believe there is something missing. Interviews were conducted with multiple university officials who work in sports and health, former football players, and team doctors. After interviews, 18 former football players who …

The Effect Of Golf Shoe Characteristics On Static Balance Over An Extended Duration, Jordan Colbert

Honors Theses

Golf performance is greatly impacted by balance ability, specifically during a golfer's swinging and putting motion. Previous studies have found that certain shoe characteristics can affect balance; however, no such study has been conducted for golf shoes. This study's objective was to compare balance scores between three different golf shoe styles and determine which style or characteristics serve golfers best in improving balance under quiet standing conditions over time. Twelve adults (age: 23.4 ± 2.2 years; height: 181.5 ± 9.0 cm; mass: 95.8 ± 18.6 kg) participated in this study. Each participant made four visits, one for each footwear condition: …

Performance Of Message Queue Telemetry Transport Protocol And Constrained Application Protocol In Wireless Sensor Networks, Yaguang Chen

Honors Theses

The Wireless Sensor Networks (WSNs) are formed by a broker/server, a few gateways and a large numbers of Sensor/Actuator (SA) devices, which are battery-operated and able to collect information about their environment, storage a small amount of data and transfer those data to the gateways for further operations. In this paper, two potential high performance protocols that could be implemented for WSNs are studied. These two protocols are MQTT-SN and CoAP protocols and their performances of time efficiency and power efficiency are mainly discussed and studied. A set of principles and designed experiments for both protocols are presented. The simulation …