Engineering Commons^™

Investigation Of Zebrafish Larvae Behavior As Precursor For Suborbital Flights: Feasibility Study, Pedro Llanos, Kristina Andrijauskaite, Mark Rubinstein, Sherine S.L. Chan

Pedro J. Llanos (www.AstronauticsLlanos.com)

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

R. Eric Landrum

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Assessing An Assessment: The New Nsse Il Module, Debbie Morrow

Debbie Morrow

Determining Graduation Rates In Engineering For Community College Transfer Students Using Data Mining, Marcia Laugerman, Diane T. Rover, Mack C. Shelley, Steven K. Mickelson

Diane Rover

This study presents a unique synthesized set of data for community college students entering the university with the intention of earning a degree in engineering. Several cohorts of longitudinal data were combined with transcript-level data from both the community college and the university to measure graduation rates in engineering. The emphasis of the study is to determine academic variables that had significant correlations with graduation in engineering, and levels of these academic variables. The article also examines the utility of data mining methods for understanding the academic variables related to achievement in science, technology, engineering, and mathematics. The practical purpose …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Kate Perkins

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Kate Perkins

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Longitudinal Success Of Calculus I Reform, Doug Bullock, Kathrine E. Johnson, Janet Callahan

Janet M. Callahan

This paper describes the second year of an ongoing project to transform calculus instruction at Boise State University. Over the past several years, Calculus I has undergone a complete overhaul that has involved a movement from a collection of independent, uncoordinated, personalized, lecture-based sections, into a single coherent multi-section course with an activelearning pedagogical approach. The overhaul also significantly impacted the course content and learning objectives. The project is now in its fifth semester and has reached a steady state where the reformed practices are normative within the subset of instructors who might be called upon to teach Calculus I. …

Revealing Student Misconceptions And Instructor Blind Spots With Muddiest Point Formative Feedback, Cindy Waters, Stephen J. Krause, Janet Callahan, Barry Dupen, Mary B. Vollaro, Peggie Weeks

Janet M. Callahan

Of interest to all engineering disciplines, well-designed formative feedback has the potential to enhance both instructor teaching and student learning. Delivering fundamental courses year after year, can ultimately lead faculty to use stale notes or slides from past years. This approach may save time, but does not meet the shifting needs of our students who have high expectations from their instructors. One simple method to improve teaching is to employ muddiest point reflections. Muddiest point reflections involve simply asking students to anonymously reflect on what was “muddy”, i.e. confusing, during class and to rank their level of confusion which not …

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Amy J. Moll

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Janet M. Callahan

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

Attending To Scientific#12; Practices Within Undergraduate Research Experiences, Gina M. Quan, Chandra Anne Turpen, Andrew R. Elby

Gina Quan

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Daniel Edwards

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Jacob Pearce

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Engineering Assessment Development Report: Ahelo Feasibility Study, Jacob Pearce, Julian Fraillon, Hamish Coates, Sarah Richardson

Julian Fraillon

No abstract provided.

The New Aviation Meteorology Specialization In The Graduate Aeronautics Program At Embry-Riddle, John M. Lanicci, Erin A. Roberts

John M Lanicci

The next 12 months will be an exciting time of growth in graduate aviation studies at Embry-Riddle Aeronautical University's Daytona Beach, FL campus. Beginning in Fall Semester 2009, a new Area of Concentration (AOC) in Aviation Meteorology will be added to the Master of Science in Aeronautics (MSA) program, and the new Doctoral program in Aviation will be starting in January 2010. The Aviation Meteorology AOC adds a crucial specialty to the existing MSA options in Air Traffic Management, Aviation/Aerospace Education Technology, Aviation/Aerospace Management, Aviation/Aerospace Operations, and Aviation/Aerospace Safety Systems. The Aviation Meteorology AOC is designed to be a cross-disciplinary …

The Weather And Air Traffic Management Integration Course In The Graduate Aeronautics Program At Embry-Riddle, John Lanicci

John M Lanicci

One year ago, Embry-Riddle Aeronautical University added a new Area of Concentration (AOC) in Aviation Meteorology to the Master of Science in Aeronautics (MSA) program at the Daytona Beach, Florida campus. As part of the preparation for the start of this program, an experimental graduate seminar in Weather and Air Traffic Integration was taught over the summer, which attracted graduate students with backgrounds in commercial and private aviation, applied meteorology, and engineering physics. The purpose of this course was to introduce the students to the concept of weather and air traffic integration as it currently exists and is being planned …

Weather Technology In The Cockpit (Wtic): Concept Of Operations, User Needs, Education, And Training, John Lanicci, L. Kirk, L. Martin, J. Vacek, E. A. Roberts, M. Edwards

John M Lanicci

The FAA, through sponsorship of the Center for General Aviation Research (CGAR), has funded a multi-disciplinary research program on Weather Technology In the Cockpit (WTIC). The CGAR is a consortium of four universities, three of which (Embry-Riddle Aeronautical University, University of North Dakota, University of Alaska-Anchorage) are working together on this program. Each university partner has the lead on a portion of the project: the University of Alaska-Anchorage is the lead on developing the WTIC Concept of Operations (CONOPS); the University of North Dakota is the lead on developing a robust set of WTIC user needs; Embry-Riddle Aeronautical University is …

Assessing The Effectiveness Of An Education And Training Module For General Aviation Pilots On The Use Of Nexrad-Based Products In The Cockpit, John Lanicci, Erin Roberts, E. Blickensderfer

John M Lanicci

Numerous studies over the years have documented the need to improve meteorological education and training for General Aviation (GA) pilots. With the advent of readily available aviation weather hazard products for real-time pilot use on the flight deck, there is now a lack of education and training on the proper interpretation and usage of these products. Data-linked NEXRAD is a good example of a currently available real-time product that is very popular in the GA community, but lacks a coherent understanding of its proper usage in pre-flight planning and in-flight operation.

Proper usage of NEXRAD in the cockpit should require …

Improving Engineering Work And Study, Daniel Edwards, Jacob Pearce

Dr Jacob Pearce

Daniel Edwards and Jacob Pearce discuss a study that explores the perceptions of the engineering workforce, including engineering education and barriers to participation and career advancement.

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Dr Jacob Pearce

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Wikis For Group Work: Encouraging Transparency, Benchmarking And Feedback, Amir Abdekhodaee, Dini Kourosh, Farnaz Modarres, Anne-Marie Chase, Bella Ross

Dr Anne-Marie Chase

Computer Aided Pronunciation Learning For Al-Jabari Method: A Review, Noor Jamaliah Ibrahim, Mohd Yamani Idna Idris, Zulkifli Mohd Yusoff

Noor Jamaliah Ibrahim

Speech processing for Quranic Arabic is an active field of research, since a few years ago. We propose in this paper, a review on the potential of automatic speech recognition (ASR) computer-based technology to support Quranic learning processes. Thus, the aspects of Computer-Aided Pronunciation Learning (CAPL) are discussed, focusing towards the implementation on Quranic learning through Al-Jabari method. We believe Al-Jabari method is fast and efficient, as well as a practical way of learning Al-Quran. The analysis of CAPL systems towards the implementation in Quranic learning through Al-Jabari method are discussed in details.

Improving Engineering Work And Study, Daniel Edwards, Jacob Pearce

Dr Daniel Edwards

Daniel Edwards and Jacob Pearce discuss a study that explores the perceptions of the engineering workforce, including engineering education and barriers to participation and career advancement.

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Dr Daniel Edwards

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Dr Justin Brown

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Assessing Student And Employer Satisfaction In A Liberal Arts/Engineering Bachelor Of Arts Degree, Michael Haungs

Michael Haungs

No abstract provided.

Anatomy Of An “Instruction Plan”: Information Literacy, Abet Lifelong Learning, And The Engineering Curriculum, Debbie Morrow

Debbie Morrow

Planning library instruction to help disciplinary departments meet accreditation is a strong way for academic libraries to demonstrate value. During 2012 the Liaison Librarians at Grand Valley State University undertook a new initiative to develop “instruction plans” for each of our liaison departments. The goal of a departmental instruction plan is to profile the curriculum in a discipline and strategically identify prospective courses for offering library instructional support where the greatest number of students can experience the most benefit, relevant to specific assignments and discipline-specific skill areas. The plan also captures specific information literacy core competencies that the librarian plans …

Risk Analysis & Management In Student-Centered Spacecraft Development Projects, Jeremy Straub, Ronald Fevig, James Casler, Om Yadav

Jeremy Straub

Student involvement in any engineering project introduces an element of risk. This risk is particularly pronounced with small spacecraft projects, as a failure of the spacecraft on-orbit can result in a complete failure of the mission. However, student involvement in these projects is critical to allow research aims to be accomplished, in a university setting, and to train the next generation of spacecraft engineering professionals. The nature of risks posed by student involvement is discussed and a framework for assessing and mitigating these risks presented.

An Assessment Of The Effects Of Desertification In Yobe State, Nigeria, Jibril Musa Phd

Confluence Journal Environmental Studies (CJES), Kogi State University, Nigeria

Desertification is one of the most serious environmental and socio-economic problems of our time. Desertification describes circumstances of land degradation in arid, semi-arid and dry sub-humid regions resulting from the climatic variation and human activities. The fundamental goal of this thesis was to assess the effects of desertification in Yobe State, Nigeria. The present threat of desertification in the sahel has reached an alarming stage where crops cultivation and animal rearing/grazing are no more productive, soil has lost its nutrient/fertility, various infrastructure had given way because of windstorm from the neighbouring Niger Republic and sand dunes had taken over. The …

Using Remote Sensing Data To Improve Rice Production In Kutigi, Niger State, Nigeria, Jibril Musa Phd, M B. Yunusa

Confluence Journal Environmental Studies (CJES), Kogi State University, Nigeria

This research work looked in the used of Remote Sensing to improve Agricultural production in Kutigi, Niger State. The aim of the study is to use remote sensing to improve rice farming activities in Kutigi, Niger State. It is very important to identify such methods to improve Agricultural production because experts are always interested in new researches and findings to better the standard of living in any environment. In view of this, Remotely-sensed data could be used or employed to elevate most of these agricultural problems in Kutigi through the following objectives: Using Landsat imagery to assess the present landuse …