Engineering Commons^™

Cal Poly's Old Powerhouse Analysis Assessing Stakeholder Preferences, Marissa D. Burns

Construction Management

This research paper delves into the historical and cultural relevance of Cal Poly’s Old Powerhouse, the college’s oldest architectural landmark, which has remained in a state of disuse since the 1990s. Employing meticulous survey methodology; perspectives from faculty, staff, alumni, students, and community members are gathered to illustrate the significance of the Old Powerhouse within the various stakeholders. The study refrains from imposing interpretation but rather seeks to capture the sentiments expressed by stakeholders, providing valuable insights into the building’s perceived value. By centering on the community opinions, the research will underscore the building’s potential and expand on the collected …

Building Services Engineering March/April 2024

Building Services Engineering

No abstract provided.

Efficacy Of Passive Ventilation With High Exhaust Demands: A Case Study Of Cal Poly Sst, Siddarth Bokka

Construction Management

The Simpson Strong Tie Demonstration Laboratory serves as a multipurpose space allowing students at the College of Architecture and Environmental Design at California Polytechnic State University to build full scale construction projects. The building features a material storage area, a high bay for construction of full-scale projects, and a mezzanine level that houses digital fabrication equipment. However, the building was never designed to house the specific equipment currently installed on the mezzanine and ventilate the exhaust fumes from them. Rather, the building relies on passive natural ventilation that is likely ineffective at properly exhausting hazardous fumes, resulting in complaints from …

Synthesis And Characterization Of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites, Fatemeh Mahdiyeh-Boroujeni, Gabriella Fioravanti, Ronald Kander

School of Design and Engineering Papers

The pursuit of an environmentally sustainable manufacturing process requires the substitution of less damaging and recyclable solutions for harmful reagents. This study aims to assess the effectiveness of using cellulose microfibrils synthesized via different hydrolysis reactions as reinforcing agents in polyvinyl alcohol (PVA) at varying concentrations. The investigation explores the morphology, thermal properties, and chemical behavior of the cellulose particles. The cellulose microfibrils (CMFs) produced using citric acid exhibited the highest yield and aspect ratio. Notably, particles from organic acids demonstrated greater thermal stability, with oxalic acid-derived particles displaying the maximum thermal degradation temperature. Subsequently, cast films of PVA reinforced …

Visual Privacy As An Approach To Improve Human Needs In Residential Buildings In Egypt, Inas Samir Ibrahim, Walaa Nour, Mustafa Alwan

Journal of Engineering Research

Architecture reflects a nation’s cultural, social, and environmental characteristics. As a result of the recent globalization, countries have lost their distinctive architectural identities; due to this, it is difficult to identify A country’s unique identity locally and regionally. Specifically, in Egypt, houses in the traditional style are considered one of the most iconic architectural styles. There is an amazing local identity and a unique spatial quality in the region that characterizes Egypt. On the other hand, Western influences have caused many of the values and attributes of houses to fade. One of the most prominent values is the home’s loss …

The Effect Of Building Information Modeling Technology On The Future Of Architecture Education Development In Universities, Mohamed Abd Elnaser Hamoda, Mahmoud Ahmed Zaki, Marwa Ahmed Kamer Faculty Of Engineering, Tanta University

Journal of Engineering Research

At the beginning of the current century , and with the development of computer technology , a new system based on three-dimensional drawings and modeling appeared with an accurate definition and description of all the elements in the submitted design , with the big development of construction methods and the advancement of the related technology and software, the advantages of the new system were defined and became more specific and relied in many organizations , companies and in design and construction institutions , and this system was called the building information modeling (BIM) .

Despite the importance of the system …

Project Stakeholder Analysis In Temadore Bridge Construction Development, Hud Rafsanjani, Ayomi Dita Rarasati

Smart City

The construction of bridge is important due to its ability to link communities through land-road connection, thereby saving time and increasing productivity of those living in these areas. Therefore, this research evaluated the Temadore bridge, built to link Ternate City, Maitara land and Tidore City by road to enhance movement and reduce disparities in assessing both areas. Data were collected using the Interpretative Structural Modeling (ISM) which searched for and identified several variables according to the dependence power and driving power. The result showed that construction of bridge increased the movement of community activities and productivity, thereby leading to growth.

Building Services Engineering January/February 2024

Building Services Engineering

No abstract provided.

Barriers To Use Of Cross-Laminated Timber In Maine, Shane R. O'Neill

Forest Resources Faculty Scholarship

To increase understanding of both the adoption rate and in-state manufacturing of mass timber In Maine, the 131^st Legislature and Governor Mills passed LD 881, a resolve directing a study of the barriers facing cross-laminated timber In Maine and provide recommendations to promote their use in construction. This study was developed in response to the resolve. The study engaged 108 unique participants to define available training, education, and experiences across the stakeholders throughout the building lifecycle process in the state.

From this information, the following five recommendations are proposed:

1. Understand the policies and initiatives of other states to develop …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Organic Electronics In Biosensing: A Promising Frontier For Medical And Environmental Applications, Jyoti Bala Kaushal, Pratima Raut, Sanjay Kumar

Durham School of Architectural Engineering and Construction: Faculty Publications

The promising field of organic electronics has ushered in a new era of biosensing technology, thus offering a promising frontier for applications in both medical diagnostics and environmental monitoring. This review paper provides a comprehensive overview of organic electronics’ remarkable progress and potential in biosensing applications. It explores the multifaceted aspects of organic materials and devices, thereby highlighting their unique advantages, such as flexibility, biocompatibility, and low-cost fabrication. The paper delves into the diverse range of biosensors enabled by organic electronics, including electrochemical, optical, piezoelectric, and thermal sensors, thus showcasing their versatility in detecting biomolecules, pathogens, and environmental pollutants. Furthermore, …

Building Services Engineering November/December 2023

Building Services Engineering

No abstract provided.

Building Services Engineering September/October 2023

Building Services Engineering

No abstract provided.

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

The Current State Of Practice Of Building Information Modeling, Kevin P. Brooks

Masters Theses

Building Information Modeling (BIM) has become extremely prominent in the construction industry in the past twenty years. It serves as a digital repository that can, when used to its fullest potential, combine all aspects of designing, building, and managing a structure in one place, alongside all the data produced in those processes. The construction industry has to date struggled to increase productivity alongside similar fields, such as the manufacturing industry, though the construction industry generally has far more stakeholders on one project than the manufacturing industry. Further, building designs are becoming more complex while project schedules are becoming tighter. As …

Ten Questions Concerning Smart And Healthy Built Environments For Older Adults, Sanjay Kumar, Samuel H. Underwood, Julie L. Masters, Natalie A. Manley, Iason Konstantzos, Josephine Lau, Ryan Haller, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

In the past decade, the term ‘global aging’ has gained much attention among researchers, policymakers, civil societies, and governments worldwide. The continuous decline in fertility rates and increased life expectancy have resulted in an ongoing demographic transition where the share of adults aged 65 or older is increasing and outnumbering children younger than five years. In the United States and other developed countries, this rapid demographic transition is expected to continue to strain the existing health infrastructure as it becomes increasingly challenging to ensure healthy living environments for older adults. The ten questions and answers in this paper have been …

The Extent Of Drone Education Being Taught In Asc Schools To 4-Year Construction Students, Cheran Teja Dumpati

All Theses

The technology of Unmanned Aircraft Systems (UAS) is growing rapidly in many fields and has become one of the skills in demand in the industry. Universities are one of the primary sources of teaching drone technology with a career-oriented approach. The goal of this study is to investigate the content of the drone curriculum being taught in Associated Schools of Construction (ASC) schools. This includes the topics covered, practical training offered, and the key deliverables taught. This information serves as a foundation for the schools that are looking forward to start drone courses in their department. The research found that …

Building Services Engineering July/August 2023

Building Services Engineering

No abstract provided.

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Incentivizing Electric Vehicle Adoption Through State And Federal Policies: Reviewing Influential Policies, Joshua Sabata, Subhaditya Shom, Ahmad Almaghrebi, Anne Mccollister, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

All-electric vehicles (EVs), battery-powered EVs (BEVs), and plug-in hybrid EVs (PHEVS) are gaining market share and increasing in popularity with the buying public because the battery range (longer) and cost (lower) have reached sweet spots, the charging infrastructure is more robust, and concern with global cli­mate change is high. In 2013, only 100,000 EVs were sold in the United States, but by 2022, approximately 800,000 have been purchased. A similar growth is seen in EV sup­ply equipment (EVSE), i.e., EV charging stations, with 19,742 documented EV charging station locations in the United States in 2013 to 50,054 documented EV charging …

The Viability Of Electrification For Industrial Off-Road Vehicles In Construction, Caden Patrick Stoker

Construction Management

Federal and State legislation has been passed limiting the prospective propulsion options for heavy industrial off-road vehicles that general contractors can operate on the jobsite. The interest behind this research project is the viability of introducing fully electric off-road construction vehicles into the heavy civil construction industry and if the timeline for implementation is realistic or optimistic. As new rules and regulations pertaining to the future emissions requirements of civilian and commercial vehicles effect the country, the construction industry is spending billions in order to develop (and are currently developing) fully electric off-road industrial vehicles (dozers, front loaders, scrappers, dump …

City Farm Slo Educational Pizza Oven, Koby J. Ramage

Construction Management

City Farm SLO is a nonprofit that educates the public about growing food, and they donate the produce to food banks and communities in need. Their mission is to promote healthy living through sustainable agriculture and farm-based education. This senior project is to build them an educational pizza oven for them to use in their classes. With it they will give lessons where they cook pizzas using ingredients that they grow on site. To do this, the builder had to make it lightweight and able to move around the property to different meeting places and outdoor classrooms. It is also …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …