Engineering Commons^™

Smart Building And Construction Materials, Donglu Shi, Julian Wang, Wen Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Literature Survey Of Wet-Waste And Hydrothermal Carbonization System: A Comparative Evaluation, Ramat Olaide Yusuf

Dissertations and Theses

This thesis describes the process of Hydrothermal carbonization and a comparative assessment on recent work done on the process using different feedstocks such as Raw Apple (RA), Apple chip pomace (ACP), apple juice pomace (AJP), grape pomace (GP), macadamia nut-shell (MNS), Sewage Sludge (SS), Poultry Litter (PL) and Grape Marc (GM). The data obtained from the literature survey was compared with the data obtained by the CCL team on the SWPS gasifier (HTC of poultry litter) to obtain how carbon conversion efficiency, syngas composition, thermal efficiency, char production rate, gas production rate and energy utilization vary with carbonization process conditions, …

Development Of Electromagnetic Friction Dampers For Improving Seismic Performance Of Civil Structures, Mohsen Amjadian

Dissertations and Theses

Energy dissipation is critical to limiting damage to civil structures subjected to extreme natural events such as earthquakes. Friction is one of the most reliable mechanisms of energy dissipation that has been utilized extensively in friction dampers to improve seismic performance of civil structures. Friction dampers are well-known for having a highly nonlinear hysteretic behavior caused by stick-slip motion at low velocities, a phenomenon that is inherent in friction and increases the acceleration response of the structure under control unfavorably, in spite of the fact that the displacement is generally reduced because of the energy dissipation. This increase in acceleration …

Hydroclimate Drivers And Atmospheric Dynamics Of Floods, Nasser Najibi

Dissertations and Theses

Our preliminary survey showed that most of the recent flood-related studies did not formally explain the physical mechanisms of long-duration and large-peak flood events that can evoke substantial damages to properties and infrastructure systems. These studies also fell short of fully assessing the interactions of coupled ocean-atmosphere and land dynamics which are capable of forcing substantial changes to the flood attributes by governing the exceeding surface flow regimes and moisture source-sink relationships at the spatiotemporal scales important for risk management. This dissertation advances the understanding of the variability in flood duration, peak, volume, and timing at the regional to the …

Development Of Test Methods For Characterizing Extrudability Of Cement-Based Materials For Use In 3d Printing, Jonathan Thomas Kuchem

Masters Theses

"3D printing is the process of creating three-dimensional objects using an automated additive manufacturing process. The 3D printing process has been used with materials such as metals and polymers, but application with cement based materials for the construction industry has yet to be developed. In this research, two main problems were investigated for printing cement based composite materials: extrudability and tensile reinforcement. Fiber-reinforced concrete (FRC) was studied as an internal reinforcing system to increase tensile/flexural strength. First, FRC was studied to investigate mechanical properties and use of fibers from waste tires as an environmentally friendly option. A reference mixture with …

Field Testing And Simulation Of Vadose-Zone Recharge Wells In The Mississippi River Valley Alluvial Aquifer As An Artificial Recharge Method, Kyungwon Kwak

Electronic Theses and Dissertations

Increasing concerns regarding depletion of groundwater in the Delta region of Mississippi have led to a need to augment natural recharge. Infiltration basins are often one of the simplest means of artificially recharging aquifers. However the Delta has a layer of clay and silt at the surface so it is a better idea to use vadose-zone recharge wells that are not limited by the surficial layer of fine soils. The purpose of this study is to use full-scale field testing to assess the feasibility of using vadose-zone wells for artificial recharge of the Mississippi River Valley alluvial aquifer by using …

Optimizing The Performance Of Complex Engineering Systems Aided By Artificial Neural Networks, Khalil Qatu

Electronic Theses and Dissertations

In the first problem Polyetherimide graphene nanoplatelets papers (PEIGNP) were tested with different graphene loadings varying from 0-97 weight percent (WT%). The resulting stress-strain curves were utilized to develop two ANN models. Stress-controlled and strain-controlled models. Both models shoan excellent correlation to the experimental. Several Mechanical properties were calculated from the predicted stress-strain curves namely; toughness maximum strength maximum strain and maximum tangent modulus. Both models captured the same overall behavior of the PEIGNP composite. However the strain-controlled model was found to predict lower stress than the stress-controlled model. Finally a Graphical User Interface (GUI) was developed to aid in …

Minimizing Trihalomethane Formation Through Source Water Monitoring And Optimizing Treatment Practices, Nashid Mirza

Graduate Theses, Dissertations, and Problem Reports

Trihalomethanes, a family of halogenated disinfection byproducts, are prevalent in finished drinking water. According to USEPA’s Disinfectants and Disinfection Byproducts Rules (DBPRs), the regulatory standard of the total trihalomethanes (TTHMs) is 80 μg/L, and water treatment plant operators are required to closely monitor TTHMs in the finished water on a quarterly basis. Although total organic carbon (TOC) has been identified as a precursor for the TTHMs, knowledge gaps still exist in how specific water and treatment related factors (e.g., intake water quality, seasonal variation, contact time, and treatment train) affect TTHMs formation. Focusing on water treatment plants in southwestern Pennsylvania, …

Review Of Water Allocation Models For West Virginia, Madison Lee Alexis Thompson

Graduate Theses, Dissertations, and Problem Reports

Modeling river basins started gaining in popularity and usage in the western part of the United States in large part due to its extreme droughts. Planning is necessary to sustain the population, industries, and recreational water use year-round. Water allocation modeling is a tool used to aid in the issues that come from managing water resources. This work considers the continuous models that synthesized the hydrologic processes that occur and provides a simulation of past, current, or future conditions.

West Virginia, located on the eastern side of the United States, does not have an extreme drought problem as seen in …

Numerical Modeling Of Hydraulic Fracture Propagation And Comparison With Microseismic Data At A Field Site, Carter Lawrence Hulcher

Graduate Theses, Dissertations, and Problem Reports

A hydraulic fracturing site in Morgantown, West Virginia, USA was selected to be a research site for the Marcellus Shale Energy and Environment Laboratory (MSEEL) project which was funded by the U.S. Department of Energy (DOE). The overall objective of the MSEEL research project is to evaluate and improve technologies to enhance shale gas recovery with minimal impacts on the environment. The field site has two previously drilled wells and two newly drilled wells for extracting natural gas. A separate exploratory well (or “science well”) was also drilled and includes a geophone array to extract important seismic/microseismic event information, which …

Structural Behavior Of Steel Plate Embedded Hybrid Gfrp Shapes, Piyush R. Soti

Graduate Theses, Dissertations, and Problem Reports

The civil infrastructure industry has been dominated by traditional materials such as steel, timber, and concrete. Although these materials offer great advantages, they have major durability issues in terms of corrosion, decaying, and cracking. Traditional material-based structures deteriorate frequently and require regular-interval repairs with huge expenditures. To resolve these maintenance and durability issues associated with traditional materials, fiber reinforced polymer (FRP) composites have gained some popularity in the past few decades because of their superior mechanical properties and durability. Carbon-FRPs (CFRPs) and glass-FRP (GFRPs) are the most commonly used FRPs in the market. However, in civil engineering applications, CFRPs are …

Short Beam Shear Strength Evaluations Of Gfrp Composites: Correlations Through Accelerated And Natural Aging, William Todd Barker

Graduate Theses, Dissertations, and Problem Reports

Fiber Reinforced Polymers (FRP) composites have been materials of interest in replacing or reinforcing steel, wood, and concrete, but lack of understanding of degradation under physical and chemical aging is a main concern. Through many years of research, the understanding of aging or durability of GFRPs has improved. To be able to evaluate aging related degradation rates, an accelerated aging methodology under varying environments is introduced. Accelerated aging is a concept used to age composites in a lab controlled environment under varying pH conditions (2 to 13) and temperatures (~ -20° to +160°F). Once acceleratedly aged testing is completed, Arrhenius …

Retaining Wall System With Soldier Pile And Composite Resin Infused Lagging Elements, Shane Phillip Moore

Graduate Theses, Dissertations, and Problem Reports

Retaining walls are used as an alternative to installing drainage and soil reinforcement, depending on site conditions. This report discusses the design of a retaining wall with steel soldier piles and lagging elements for rocky slopes. The design consists of six different options, three options with a span of eight feet and three options with a span of ten feet between soldier piles. The three options for both spans are the same concept but designed for different load conditions. These options include: timber with glass fiber reinforced polymers (GFRP) wraps, reinforced concrete with GFRP wraps, and an FRP Prodeck system …

Evaluating Design Criteria For High Hazard Dams In A Changing Climate, Aaron Read Sutton

Graduate Theses, Dissertations, and Problem Reports

With changes in climate, there is the potential for future flooding events to vary in frequency and magnitude. These changes may stress the 432 high hazard dames in West Virginia. The 100-year flowrate is an important design criterion for emergency spillways of high hazard dams. Emergency spillways are designed to be reached only by 100-year flow and above. This work quantified how changes in the 100-year flowrate may affect emergency spillway activation. Peakflow data from the Central Appalachian Ecoregion in WV, taken from 24 USGS gages, were used to analyze changes in the 100-year flowrate.

Flow frequency analysis revealed that …

Bending Response Of Timber Mortise And Tenon Joints Reinforced With Filler-Modules And Frp Gussets, Andrew Robert Pacifico

Graduate Theses, Dissertations, and Problem Reports

In 2013, the California Bay Area (CBA) passed a set of ordinances to ensure that their 10,000 plus timber soft-story buildings were prepared for seismic events, through nondestructive evaluation methods. Many property owners are searching for an affordable retrofitting system that will also meet CBA’s new laws focusing on installations by the mandated deadlines in 2020. Over the past three to four decades, Fiber Reinforced Polymer (FRP) composites have found their way into the civil infrastructure sector for rehabilitation. The objective of this study is to evaluate the bending behavior retrofitted mortise and tenon timber joints reinforced with engineered wood …

Investigating The Use Of Passive Acoustics As A Surrogate Method Of Monitoring Coarse Bedload Transport In Rivers And Streams Via Laboratory Experiments And Field Studies, Bradley Goodwiller

Electronic Theses and Dissertations

The movement of coarse gravel in rivers in streams is important for many applications including wildlife habitation, river morphology, infrastructure maintenance and marine navigation. Physical sampling remains the most accurate method of determining coarse bedload transport but it can be expensive, dangerous and flow intrusive. Surrogate methods of monitoring bedload transport is an active area of research worldwide. One such method is the use of passive acoustics to record the sound generated when gravel particles in motion impact each other or the particles on the bed. This dissertation presents research and development that has been conducted on three key areas …

Field Performance And Rating Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder With A Steel Sandwich Plate Deck, Nicole Marie Hegele Underwood

Graduate Theses, Dissertations, and Problem Reports

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. The SSSBA technical working group has developed a shallow press-brake-formed tub girder, a trapezoidal cold bent girder, to address the demand in the short span steel bridge market for rapid infrastructure replacement solutions.

Following extensive experimental testing and design work at West …

Building Energy Modeling And Techno-Economic Feasibility Analysis Of Zero Net Energy Tiny Homes In Coastal Humboldt County, California, Jeffrey Alan Harkness

Cal Poly Humboldt theses and projects

This thesis conducts a techno-economic feasibility analysis of tiny homes. Scenarios generated using a mathematical and physical model of energy use of zero-net energy tiny homes in coastal Humboldt County are compared with conventional energy systems powered by fossil-fuels for lifecycle economic cost, energy efficiency, greenhouse gas emissions, and energy use. A residence of 2,425 ft.² (near the regional average) is simulated to offer a broader standard of comparison. A tiny home village model with outlying bedrooms and a central building for cooking, laundry and shower facilities is compared to a standalone tiny home model. A community services building …

Characterizing Accumulated Oxidation Pond Biosolids At The Arcata Wastewater Treatment Facility, Joshua M. Martinez

Cal Poly Humboldt theses and projects

Oxidation ponds (OPs) are a natural wastewater treatment system that have been used internationally for their low maintenance, cost, and technology characteristics. The City of Arcata has relied on the performance of their two-oxidation ponds for the past 50 years to meet National Pollutant Discharge Elimination System (NPDES) discharge permit requirements. However, during specific times of the year and after decades of operation and minimal maintenance, these oxidation ponds serve as a source of solids and nitrogen that create stress for downstream components of the system. As bio solids have accumulated, the hydraulics of the OPs have deteriorated and the …

Assessment Of Uv Light For The Treatment Of Cyanotoxins In Small-Scale Drinking Water Treatment Systems, Ryan Spencer Mclintock

Cal Poly Humboldt theses and projects

Harmful Algal Blooms (HABs) are commonly caused by the rapid growth of cyanobacteria in fresh waterways, which many people rely on for drinking water. When a HAB occurs, a variety of cyanotoxins can be produced and released into sources of drinking water, which can make people sick or die if not properly treated. Two of the most common toxins are microcystin-LR (MC-LR) and anatoxin-a (A-a), for which the World Health Organization (WHO) recommends a maximum allowable concentration of 1 µg/L in drinking water to avoid health risks. The recommendation for maximum allowable concentration was calculated specifically for microcystins, but is …

Ductile Corrosion-Free Self-Centering Concrete Elements, Maged Youssef, Mohamed E. Meshaly, Ahmed Elansary

Civil and Environmental Engineering Publications

Corrosion is a major factor in the deterioration of reinforced concrete (RC) structures. To mitigate this problem, steel bars can be replaced with glass-fiber-reinforced-polymer (GFRP) bars. However, the lack of ductility of GFRP-RC elements has prevented their use in many structural applications, especially in seismic areas. Superelastic shape memory alloy (SMA) bars have been proposed to be used in seismic areas because of their self-centering characteristics. Also, they have the added advantage of being corrosion resistant. This paper examines the combined use of SMA and GFRP bars to achieve ductile self-centering and corrosion-free elements. The first challenge for such a …

Flexural Behaviour Of Superelastic Shape Memory Alloy Reinforced Concrete Beams During Loading And Unloading Stages, Yamen Ibrahim Elbahy, Maged Youssef

Civil and Environmental Engineering Publications

Trend of using smart structures, which can adjust when exposed to severe unexpected loading, is increasing. One of the methods to achieve such structures relies on smart materials. For example, replacing conventional steel reinforcing bars in Reinforced Concrete (RC) structures with superelastic Shape Memory Alloy (SMA) bars significantly reduces the residual deformations caused by post-yielding behaviour. This paper provides in-depth understanding of the flexural behaviour of SMA RC beams. A sectional analysis method, which predicts the flexural behaviour of SMA RC beams during both loading and unloading stages, is adopted and validated using available experimental data. An extensive parametric study …

Seismic Performance Of Reinforced Concrete Frames Retrofitted Using External Superelastic Shape Memory Alloy Bars, Yamen Ibrahim Elbahy, Maged A. Youssef, Mohamed E. Meshaly

Civil and Environmental Engineering Publications

Pre-1970s designed and built reinforced concrete frame structures are considered unsafe when subjected to seismic loads. Insufficient anchorage of the beam reinforcement in the beam-column joints of these structures is considered a main deficiency. Newly built frame structures are seismically designed for safety, where high inelastic deformations can occur under moderate to strong earthquakes. Minimizing these inelastic deformations makes the structure repairable. One way to minimize these residual deformations is by using smart materials such as superelastic shape memory alloys (SMAs). In this paper, the seismic performance of RC frames retrofitted using external superelastic SMA bars is investigated and compared …

The Nola Development: Stormwater Management And Green Alternative Designs, Davis P. Odle

Honors Theses

In the design for any development, the management of storm and wastewater is crucial in creating a viable product. The NOLA complex is a development in Oxford, MS that consists of residential as well as commercial units. The stormwater management systems designed for this facility include: an underground storage device, separate ductile iron pipes for the stormwater and wastewater outflows, a rain garden for green alternative storage. The underground storage system is designed for the 500-year storm and to fit under the southwest parking lot on the site. The stormwater outflow pipe will be designed for the 100-year storm, while …

Research On High-Rap Asphalt Mixtures With Rejuvenators - Phase Ii, Hamzeh Haghshenas, Gabriel Nsengiyumva, Yong-Rak Kim, Kommidi Santosh, Soroosh Amelian

Nebraska Department of Transportation: Research Reports

A previous study by the authors have demonstrated effectiveness of three rejuvenators: R1 (triglyceride/fatty acid: agriculture-tech based), R2 (aromatic extract: petroleum-tech based), and R3 (tall oil: green-tech based) on rejuvenating properties of the aged binder. In that study, it was observed that the rejuvenators made high-RAP mixtures softer and more compliant, which may increase the rutting potential, while they simultaneously improve cracking resistance of the high-RAP materials. Research outcomes and findings from the previous study resulted in consequential research needs for more specific investigation of high-RAP mixtures with rejuvenators in order to achieve realistic implementation into future high-RAP paving projects …

Effect Of Moisture Condition On Concrete Core Strengths, Wally Heyen, Lieska Halsey

Nebraska Department of Transportation: Research Reports

The main purpose of this study was to determine if there would be any major differences between curing methods of cores taken for acceptance testing from a highway slab on a project. The comparison provided data to determine the effect of the moisture gradients created by these different curing treatments on core strength and core permeability. The strengths were measured of moist cured cores and sealed plastic bag cured cores from the day cores were obtained (14, 21 and 26 days) until they reached 28 days. Permeability was also measured at 26, 28 and 32 days. According to ASTM C42, …

Validation Of The Mechanical Rocker Test Method For Ice Melting Capacity (Mrt-Imc), Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

The anti-icing and deicing industry has interest in the development of an objective, repeatable test procedure for the evaluation and comparison of anti-icing and deicing products. Pursuant to this goal, the Nebraska Department of Transportation (NDOT) funded research at the University of Nebraska-Lincoln (UNL) to investigate methods for evaluating deicing products, beginning in 2011[1]. Researchers at UNL developed the procedure for the Mechanical Rocker Test for Ice Melting Capacity (MRT or MRT-IMC) in 2014[2].

From 2017-2019, NDOT evaluated the MRT-IMC procedure for validity and suitability as a standard test procedure for assessing deicer performance. NDOT also explored opportunities to improve …

Investigating The Interaction Of Ndot Hot-Pour Pcc Joint Sealant And Penetrating Concrete Sealers, Bruce Barrett, Dale Byre, Wally Heyen, Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

Based on the field observations on NE-83, PCS potentially impacts the bond between the concrete and hot-pour sealant after application. If penetrating sealers break the interfacial bond after application, concrete pavements could become compromised and subject to freeze-thaw damage, chloride attack, and other deleterious effects.

The results show that discoloration occurred when applying the five PCS products to the NE-3405 hot-pour sealed testing blocks. All three test methods of application; spraying, 1-min, and 5-min soaks, caused discoloration. The level of discoloration increased with the duration of contact with the PCS. Despite discoloration, none of the five PCS products caused de-bonding …

Ua66/9/1 Ogden College Of Science & Engineering Engineering Administration, Wku Archives

WKU Archives Collection Inventories

No abstract provided.

A Bridge Rehabilitation Strategy Based On The Analysis Of A Dataset Of Bridge Inspections In Co. Cork, Liam Dromey

Masters

Ageing highway structures present a challenge throughout the developed world. The introduction of bridge management systems (BMS) allows bridge owners to assess the condition of their bridge stock and formulate bridge rehabilitation strategies under the constraints of limited budgets and resources. This research presents a decision-support system for bridge owners in the selection of the best strategy for bridge rehabilitation on a highway network. The basis of the research is an available dataset of 1,367 bridge inspection records for County Cork that has been prepared to the Eirspan BMS inspection standard and which includes bridge structure condition ratings and rehabilitation …