Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 31 - 55 of 55

Full-Text Articles in Engineering

Laboratory Characterization Of #2q-Rok Sand, Wilson Fernando Espinoza Chavez Aug 2016

Laboratory Characterization Of #2q-Rok Sand, Wilson Fernando Espinoza Chavez

Open Access Theses

A series of laboratory tests were performed in a sand commercially known as #2Q-ROK to determine its response to loading. #2Q-ROK is a poorly-graded, clean silica sand composed of 99% of quartz (SiO2). Its specific gravity is 2.65 and its maximum and minimum void ratios are 1.03 and 0.7, respectively. In the absence of crushing, the #2Q-ROK sand direct shear critical-state friction angle is 32.8° and the ring shear critical-state friction angle is 29.6°.

One-dimensional compression tests were performed on samples compressed to a normal stress of 24,851.36kPa for time periods ranging from 4 hours to 11 days. The maximum …


Evaluating A Measure-Calculate Method For Determining Sediment Oxygen Demand In Lakes, Adrian Beirise Aug 2016

Evaluating A Measure-Calculate Method For Determining Sediment Oxygen Demand In Lakes, Adrian Beirise

Graduate Theses and Dissertations

A steady-state mass diffusion model used with simple measurable and calculable inputs for determining sediment oxygen demand (SOD) is compared to an intact core incubation (ICI) SOD method using samples from three lakes. The mass diffusion model coupled with inputs is known as the measure-calculate method (M-C) and is a potential alternative to existing methods for measuring SOD which are more complex, time-consuming, and costly. The M-C method requires inputs for volumetric sediment oxygen uptake (Ṅsed), sediment density and porosity, and water properties. Ṅsed was determined by suspending sediment in oxygen-saturated water with a DO probe and determining the steady …


Trend Analysis Of Water Quality In Northwest Arkansas Streams Reflects Changes In The Watershed, Zachary Paul Simpson Aug 2016

Trend Analysis Of Water Quality In Northwest Arkansas Streams Reflects Changes In The Watershed, Zachary Paul Simpson

Graduate Theses and Dissertations

Watershed export of nutrients, sediments, and chemicals impacts receiving waters. Changes within the watershed (e.g., anthropogenic or climatic) can alter the transport of constituents in streams. Stream monitoring is crucial for understanding these effects. This study developed a potential improvement to flow-adjusting constituent concentrations in streams, an important step of analyzing monitoring data in lotic systems for trends. The method incorporates a K-fold cross-validation procedure to optimize a model explaining the relationship between the concentration and streamflow, thus providing a valuable tool to researchers in water quality. Additionally, two case studies were conducted on watersheds located in northwest Arkansas using …


The Role Of Organic Matter In The Fate And Transport Of Antibiotic Resistance, Metals, And Nutrients In The Karst Of Northwest Arkansas, Victor Lee Roland Ii Aug 2016

The Role Of Organic Matter In The Fate And Transport Of Antibiotic Resistance, Metals, And Nutrients In The Karst Of Northwest Arkansas, Victor Lee Roland Ii

Graduate Theses and Dissertations

Organic matter (OM) in the environment acts as a nutrient, but may also act as a transport vector for harmful chemical compounds and bacteria. Acetate is a labile form of OM produced during fermentation in anaerobic lagoons used to store animal fecal-waste from concentrated animal feeding operations (CAFOs). Dry and liquid fertilizers from CAFOs pose a threat to groundwater by introducing excessive amounts of nutrients (e.g. OM, nitrate and ammonia), metals, and antibiotic compounds. In the epikarst of Northern Arkansas in the Buffalo River watershed additional input of labile dissolved organic carbon (DOC) from liquid CAFO waste-fertilizers was hypothesized to …


Electrodeionization Versus Electrodialysis: A Clean-Up Of Produced Water In Hydraulic Fracturing, Brigitte Marie Rodgers Aug 2016

Electrodeionization Versus Electrodialysis: A Clean-Up Of Produced Water In Hydraulic Fracturing, Brigitte Marie Rodgers

Graduate Theses and Dissertations

Electrodeionization (EDI) is a widely studied process ranging from applications in wastewater clean-up in the food and beverage industry to purifying organic compounds. To date, there are no apparent studies on applying this technology to produced wastewater recovered from hydraulic fracking sites. Water consumption within hydraulic fracturing sites can reach in the upwards of millions of gallons per site, so a need for a water recycling process becomes necessary within areas where water requirements are scarce. Implementation of an EDI module that is capable of handling high salt solutions from produced wastewater in subsequent fracturing practices will decrease overall water …


Experimental And Numerical Evaluation Of A New Composite Pressure Pipe For A Trenchless Rehabilitation Technology, Xuanchen Yen Jul 2016

Experimental And Numerical Evaluation Of A New Composite Pressure Pipe For A Trenchless Rehabilitation Technology, Xuanchen Yen

Doctoral Dissertations

The information presented in this dissertation is based on research work conducted at Trenchless Technology Center (TTC) at Louisiana Tech University. This work was performed through a contract with China University of Geoscience (CUG) for a gas company. China's gas pipelines need replacement or rehabilitation after 15 to 30 years of service. China's gas industry is looking for suitable techniques to transfer into their market.

When compared to conventional excavation pipeline renewal or replacement methods, there are obvious advantages of TRT for gas pipelines that can impact the triple bottom-line of economic, social and environmental benefits. An introduction of TRT …


Analysis Of Bridge Deck Sections By Pseudo-Compressibility Method Based On Fdm And Les: Improving Performance Through Implementation Of Parallel Computing, Blandine Therese Mbianda Kemayou May 2016

Analysis Of Bridge Deck Sections By Pseudo-Compressibility Method Based On Fdm And Les: Improving Performance Through Implementation Of Parallel Computing, Blandine Therese Mbianda Kemayou

Graduate Theses and Dissertations

The incidence of wind on bridges produces static and dynamic loading that must be adequately addressed when designing bridges. Dynamic loading is the primary concern, as the amplitude of the structures response to the applied loading may be greatly amplified. Ideally, the bridge's properties should be designed to avoid dynamic loading. Previous investigations of wind loading on bridges consisted of measuring forces produced on scaled models of bridges within wind tunnels. However, these wind tunnel tests are costly and time consuming due to cost to fabricate and instrument the bridge cross sections. Recent advancements in computational power of computers allow …


Field Observations And Computer Modeling Of Tornado-Terrain Interaction And Its Effects On Tornado Damage And Path, Nawfal Shihab Ahmed May 2016

Field Observations And Computer Modeling Of Tornado-Terrain Interaction And Its Effects On Tornado Damage And Path, Nawfal Shihab Ahmed

Graduate Theses and Dissertations

Tornado forces on structures have been a research focus for the past decades, and some comparisons have been made to distinguish between straight boundary layer (SBL) wind and tornado wind forces on specific structures. However, very little attention has been paid to terrain effects on tornado damage and path. Available damage investigation data for four tornado locations (Joplin-2011, Tuscaloosa-2011, Parish-2011 and Mayflower-2014) is utilized to explore terrain effects on tornado damage and path. Google Earth, site visits and aerial images are employed to study the influence of terrain on an extent of damage and path variation. Additionally, a three dimensional …


Development Of The Masw Method For Pavement Evaluation, Benjamin J. Davis May 2016

Development Of The Masw Method For Pavement Evaluation, Benjamin J. Davis

Graduate Theses and Dissertations

The purpose of this research is to establish a recommended procedure for performing multichannel analysis of surface waves (MASW) on pavements as well as evaluating the ability of MASW to detect a change in shear wave velocity as damage in concrete increases. The tests for establishing a recommended procedure for performing MASW on pavements was conducted at five sites at the University of Arkansas Engineering Research Center in Fayetteville, Arkansas. The five sites consisted of three materials: asphalt, concrete, and soil (two sites were on asphalt, two were on concrete, and one was on soil). The methods evaluated at these …


Structural Identification Of An Elevated Water Tower, James Thomas Norris May 2016

Structural Identification Of An Elevated Water Tower, James Thomas Norris

Graduate Theses and Dissertations

Elevated water tanks are generally located at higher elevations within a particular geographic area. The location and height of these structures often makes them desirable for installing wireless and cellular communications antennas. The impact of this practice on the long-term serviceability performance of the primary structure is not clear and could be an important consideration deserving further analysis. This paper presents a case study of an elevated water tank that was motivated by this particular consideration. The structure had been retrofitted with cellular antennas during its service and later experienced fatigue cracking at the fill pipe-tank interface. The owner wished …


Exploring The Black Space Of Compressive And Shear Modulus, Airam Marlee Morales Vega May 2016

Exploring The Black Space Of Compressive And Shear Modulus, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Uniaxial dynamic modulus is a standard test used to determine the viscoelastic behavior of asphalt pavement materials, with the standard analysis generating a Master Curve. One alternative to the master curve approach is a Black Space diagram, which is a rheological plot that can delineate either dynamic modulus |E*| or shear modulus |G*| vs. phase angle (δ). In this study, four asphalt binders were tested with one aggregate blend. One of these four binders was unmodified and the other three were modified with polymers and acids. Additionally, Polyphosphoric acid (PPA) is compared to the more traditional SBS polymer modification. PPA …


Impact Of Extreme Summer Temperatures On Bridge Structures, Ryan Hagedorn May 2016

Impact Of Extreme Summer Temperatures On Bridge Structures, Ryan Hagedorn

Graduate Theses and Dissertations

Climate change and its effect on weather in the United States is a well-documented phenomenon. In particular, extreme heat waves have become more intense, more frequent, and longer lasting, especially in the southern United States. As with much of America’s transportation infrastructure, prestressed concrete bridge girders experience the effects of these heat waves. Uneven heating of optimized bridge girder sections results in large non-linear temperature gradients. In this study, temperature was monitored in three different AASHTO I-girders to determine the vertical and transverse temperature gradients in a pre-deck placement condition. It was determined that the current design standard, which uses …


Nanofiltration Rejection Of Contaminants Of Emerging Concern From Municipal Water Resource Recovery Facility Secondary Effluents For Potable Reuse Applications, Steven Michael Jones May 2016

Nanofiltration Rejection Of Contaminants Of Emerging Concern From Municipal Water Resource Recovery Facility Secondary Effluents For Potable Reuse Applications, Steven Michael Jones

Graduate Theses and Dissertations

As reuse of municipal water resource recovery facility (WRRF) effluent becomes vital to augment diminishing fresh drinking water resources, concern exists that conventional barriers may prove deficient and the upcycling of contaminants of emerging concern (CECs) could prove harmful to human health and aquatic species if more effective and robust treatment barriers are not in place.

There are no federal Safe Drinking Water Act (SDWA) regulations in place specifically for direct potable reuse (DPR) of WRRF effluent. Out of necessity, some states are developing their own DPR reuse regulations. Currently, reverse osmosis (RO) is the default full advanced treatment (FAT) …


Quantification And Characterization Of Fracture Resistance In Asphalt Concrete Based On R-Curve Method, Shu Yang May 2016

Quantification And Characterization Of Fracture Resistance In Asphalt Concrete Based On R-Curve Method, Shu Yang

Graduate Theses and Dissertations

The application of fracture energy is widely applied in the evaluation of cracking in the laboratory for asphalt concrete. However, this single number does not provide information on the characterization of the initiation and propagation of cracks. The Resistance Curve method, or R-Curve, is widely applied in characterizing various materials including, but not limited to, metal, polymer, rock, and composite. This research R-Curve method introduces asphalt concrete through a stepwise approach. First, in chapter one, there is a literature review of the history of fracture mechanics, fracture research in asphalt concrete, and an examination of the role of R-Curve application …


Simulation Of Conservation Practice Effects On Water Quality Under Current And Future Climate Scenarios, Carlington W. Wallace May 2016

Simulation Of Conservation Practice Effects On Water Quality Under Current And Future Climate Scenarios, Carlington W. Wallace

Open Access Dissertations

Analysis of the effects of implementing different conservation practices, as well as increased levels of conservation practices under existing and projected future climate, will determine if current conservation practice recommendations will be sufficient to maintain soil and water resources. The Soil and Water Assessment Tool (SWAT) was used to study four watersheds of different sizes (CCW = 680 km2, F34 = 183 km2, AXL = 42 km 2 and ALG = 20 km2) located in Northeastern Indiana. The overarching goal of this study was to evaluate the effect of various agricultural practices on runoff and agricultural chemical losses under current …


Artificial Neural Networks For Wireless Structural Control, Ghazi Binarandi Apr 2016

Artificial Neural Networks For Wireless Structural Control, Ghazi Binarandi

Open Access Theses

We live in an age when people desire taller buildings and longer bridges. These increasing demands of more flexible structures challenge civil engineers to ensure structural safety in the state where they are more prone to extreme dynamic loading, such as earthquakes. Extensive wiring required in traditional structural control applications may be expensive and inconvenient, especially for large scale structures. To improve the scalability, wireless sensors offer a promising alternative. However, the presence of time delay and data loss in a wireless sensor network can potentially reduce the performance of the control system. Here an artificial neural network is proposed …


Dynamic Green Split Optimization In Intersection Signal Design For Urban Street Network, Peng Jiao Apr 2016

Dynamic Green Split Optimization In Intersection Signal Design For Urban Street Network, Peng Jiao

Open Access Theses

In the past few decades, auto travel demand in the United States has significantly increased, but roadway capacity unfortunately has not expanded as quickly, which has led to severe levels of highway traffic congestion in many areas. In theory, the problem of congestion addressed through demand management and roadway expansion. However, system expansion in urban areas is difficult due to the extremely high cost of land; therefore, maximizing the existing capacity therefore often is considered the most realistic option. In urban areas, most of the traffic congestion and delays typically occur at signalized intersections. This thesis aims to prove the …


Mining Big Data To Create A Tool For Empirical Observation Of Continuous Safety Improvement In A Construction Company - A Progressive Case Study In The Lean Environment, Nicolas J. Michuda Apr 2016

Mining Big Data To Create A Tool For Empirical Observation Of Continuous Safety Improvement In A Construction Company - A Progressive Case Study In The Lean Environment, Nicolas J. Michuda

Open Access Theses

In any iterative process, without a system of measurement, controlled improvement cannot be recorded. This is especially true in the construction industry, where error occurs, often with fatal repercussions. As part of a process to facilitate the establishment of this metric, an entirely new application was created. The goal of this application is to measure the causal factors that lead to incidents, which will allow the user and administration to track the circumstances and types of incidents. This enables the company to focus on these problem areas and improve through training. By analyzing these incident trends over time, the company …


A Framework For Organizational Performance Assessment In The Construction Industry, Zenith Rathore Apr 2016

A Framework For Organizational Performance Assessment In The Construction Industry, Zenith Rathore

Open Access Theses

Organizations have been trying to increase their efficiency and improve their performance in order to achieve their goals. Organizational success is determined by various factors that impact organizational performance. Construction industry is a project based industry which is extremely dynamic in nature. The need to identify the weak points and search solutions to improve performance of construction organization is extremely crucial. Previous research works have primarily focused on the measurement of financial or tangible assets. Industry has always focused on measure of project success. However, previous studies lack the understanding of qualitative factors and their combine effect on organizational performance. …


Failure Pressure And Fatigue Analysis Of The Api 12f Shop Welded, Flat Bottom Tanks, Andres E. Rondon Andueza Apr 2016

Failure Pressure And Fatigue Analysis Of The Api 12f Shop Welded, Flat Bottom Tanks, Andres E. Rondon Andueza

Open Access Theses

This study investigates the failure pressure on the API 12F shop welded steel tanks and performs a fatigue evaluation to estimate the permissible number of pressure cycles for these equipment. Four different analyses were carried out on more than 350 finite element models to determine various failure pressure modes of these storage tanks. An elastic analysis considering potential buckling modes was developed to determine the yielding pressure of the tanks. The redistribution of stresses due to inelastic deformations and plastic collapse were evaluated through an elastic-plastic stress analysis considering the plastic hardening of the material. A wind load analysis was …


Assessing The Performance Of A Soy Methyl Ester -Polystyrene Topical Treatment To Extend The Service Life Of Concrete Structures, D'Shawn G. Thomas Apr 2016

Assessing The Performance Of A Soy Methyl Ester -Polystyrene Topical Treatment To Extend The Service Life Of Concrete Structures, D'Shawn G. Thomas

Open Access Theses

Experimental results show that soy methyl ester (SME), a derivative of soy bean oil, along with the incorporation of polystyrene (PS) is a non-toxic, biodegradable and renewable material that can be used effectively as a topical concrete surface treatment. While, concrete sealants and topical surface treatments can be used to extend to durability of concrete structures, it is difficult to predict the durability of concrete structures sealed with a sealant or topical surface treatment. This is due to a lack of necessary model inputs that can be used to address the durability of concrete structures treated with these materials. In …


Development And Evaluation Of A Watershed-Scale Hybrid Hydrologic Model, Younghyun Cho Apr 2016

Development And Evaluation Of A Watershed-Scale Hybrid Hydrologic Model, Younghyun Cho

Open Access Dissertations

A watershed-scale hybrid hydrologic model (Distributed-Clark), which is a lumped conceptual and distributed feature model, was developed to predict spatially distributed short- and long-term rainfall runoff generation and routing using relatively simple methodologies and state-of-the-art spatial data in a GIS environment. In Distributed-Clark, spatially distributed excess rainfall estimated with the SCS curve number method and a GIS-based set of separated unit hydrographs (spatially distributed unit hydrograph) are utilized to calculate a direct runoff flow hydrograph, and time-varied SCS CN values and conditional unit hydrograph approach for different runoff depth-based flow convolution are also used to compute long-term rainfall-runoff flow hydrographs. …


Asphalt Pavement Preservation Using Rejuvenating Fog Seals, Ammanuiel A. Kebede Apr 2016

Asphalt Pavement Preservation Using Rejuvenating Fog Seals, Ammanuiel A. Kebede

Open Access Theses

Fog seal is a type of treatment that uses a diluted asphalt emulsion to seal and protect an existing asphalt surface from a variety of distresses. Fog seal is sprayed on top of an asphalt pavement surface to improve and protect it from further cracking and raveling. Rejuvenator is also a type of treatment that penetrates into the asphalt pavement and restores its original viscoelastic properties. Similarly, like fog seal, rejuvenators can be sprayed on top of an asphalt pavement surface. The use of rejuvenators has grown rapidly in the past decade. However, little is known about the actual effectiveness …


Evaluation Of Poisson’S Ratio Of Asphalt Concrete, Elvis Alexander Castillo Camarena Jan 2016

Evaluation Of Poisson’S Ratio Of Asphalt Concrete, Elvis Alexander Castillo Camarena

Graduate Theses and Dissertations

Poisson´s ratio can be defined as the negative ratio of strains perpendicular to the load direction to the strains parallel to the loading direction. If elastic or viscoelastic models are used, Poisson´s ratio, together with elastic modulus, is a main input used to predict distresses in flexible pavement structures such as rutting and cracking. In asphalt concrete, Poisson’s ratio is commonly measured using two different testing configurations: indirect tension (IDT) and uniaxial. However, results from these two testing configuration can potentially have differences. Design methodologies such as the Mechanistic Empirical Design Guide (MEPDG, now PavementME) have been shown to be …


Kinetic Energy Harvesting Mechanism For Vortex Drop Structures, Mungtra Chusilp Jan 2016

Kinetic Energy Harvesting Mechanism For Vortex Drop Structures, Mungtra Chusilp

Doctoral Dissertations

Energy recovery from wastewater is gaining significance as utilities work toward achieving energy neutrality and sustainability in their wastewater collection and treatment systems. In this dissertation, kinetic energy harvesting mechanism for vortex drop structures found within the municipal waste and storm water conveyance systems is presented. There are thousands of sewer drop structures installed across the U.S. carrying billions of gallons of sewage each year. A custom micro water turbine is developed in this research which could be retrofitted within the existing drop shafts to harvest the excessive kinetic energy available. This dissertation presents the conceptual design and analysis of …