Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Architecture (12)
- Building (12)
- Construction (12)
- Engineering (12)
- <p>Clay -- Testing<br />Plasticity<br />Cations<br />Ion exchange</p> (1)
-
- <p>Concrete beams<br />Bending moment<br />Strains and stresses -- Measurement</p> (1)
- <p>Concrete slabs -- Evaluation<br />Plates (Engineering)<br />Finite differences -- Computer programs</p> (1)
- <p>Concrete slabs -- Testing<br />Flexure -- Measurement<br />Strength of materials</p> (1)
- <p>Girders -- Fatigue -- Testing<br />Bending moment -- Testing<br />Optical measurements<br />Structural analysis (Engineering)</p> (1)
- <p>Hydraulic jump<br />Jets -- Fluid dynamics<br />Hydraulics</p> (1)
- <p>Karst -- Missouri<br />Carbonate rocks -- Missouri<br />Water quality -- Missouri -- Measurement<br />Water quality -- Missouri -- Meramec Spring Region -- Measurement</p> (1)
- <p>Piling (Civil engineering)<br />Retaining walls<br />Axial loads -- Testing<br />Foundations</p> (1)
- <p>Titanium alloys<br />Elasticity<br />Buckling (Mechanics) -- Testing<br />Columns -- Testing -- Mathematical models</p> (1)
- Bituminous materials -- Density<br />Pavements, Asphalt -- Testing<br />Pavements, Bituminous -- Testing (1)
- Buckling (Mechanics)<br />Cylinders -- Fatigue<br />Shells (Engineering)<br />Thin-walled structures (1)
- Concentration (1)
- Concrete -- Additives -- Testing<br />Flexure<br />Materials -- Compression testing (1)
- Concrete beams -- Fatigue<br />Reinforced concrete<br />Reinforcing bars<br />Strength of materials (1)
- Critical (1)
- Development (1)
- Differential equations, Partial<br />Elastic analysis (Engineering)<br />Foundations -- Materials -- Dynamic testing (1)
- Epoxy resins<br />Soils -- Missouri -- Phelps County<br />Soils -- Plastic properties -- Testing (1)
- Finite differences<br />Plates (Engineering) (1)
- Flow (1)
- Flume study (1)
- Folded plate structures<br />Plates (Engineering) (1)
- Folded plate structures<br />Plates (Engineering)<br />Roofs<br />Strains and stresses (1)
- Girders -- Tables<br />Prestressed concrete -- Testing<br />Structural frames -- Tables (1)
- High-gradient (1)
- Institution (1)
- Publication
- Publication Type
Articles 31 - 60 of 68
Full-Text Articles in Engineering
Procedural Guide For Estimating Axle Loadings On A Statewide Basis, Roy Hilton Larson
Procedural Guide For Estimating Axle Loadings On A Statewide Basis, Roy Hilton Larson
JTRP Technical Reports
No abstract provided.
Evaluation Of Safety At Railroad Highway Grade Crossing, Thomas Gordon Schultz
Evaluation Of Safety At Railroad Highway Grade Crossing, Thomas Gordon Schultz
JTRP Technical Reports
No abstract provided.
Evaluation Of Safety At Railroad Highway Grade Crossing, Thomas Gordon Schultz, Joseph C. Oppenlander
Evaluation Of Safety At Railroad Highway Grade Crossing, Thomas Gordon Schultz, Joseph C. Oppenlander
JTRP Technical Reports
No abstract provided.
An Analysis Of Travel Speed And Delay On A High-Volume Highway, Theodore B. Treadway
An Analysis Of Travel Speed And Delay On A High-Volume Highway, Theodore B. Treadway
JTRP Technical Reports
No abstract provided.
An Analysis Of Traffic Accidents On A High-Volume Highway : Progress Report, Arvid O. Peterson
An Analysis Of Traffic Accidents On A High-Volume Highway : Progress Report, Arvid O. Peterson
JTRP Technical Reports
No abstract provided.
Models For Trip Prediction Developed From Fourteen Urban Areas : Technical Paper, James James Schuster, Harold L. Michael
Models For Trip Prediction Developed From Fourteen Urban Areas : Technical Paper, James James Schuster, Harold L. Michael
JTRP Technical Reports
No abstract provided.
Impact Of Kokomo By-Pass From 1950-1964 : Technical Paper, Eugene G. Evans, Harold L. Michael
Impact Of Kokomo By-Pass From 1950-1964 : Technical Paper, Eugene G. Evans, Harold L. Michael
JTRP Technical Reports
No abstract provided.
Current Highway Research At Purdue: The Joint Highway Research Project : Technical Paper, Harold L. Michael
Current Highway Research At Purdue: The Joint Highway Research Project : Technical Paper, Harold L. Michael
JTRP Technical Reports
No abstract provided.
Estimating Axle Loadings On State Highways In Indiana : Technical Paper, Roy Hilton Larson, William Louise Grecco
Estimating Axle Loadings On State Highways In Indiana : Technical Paper, Roy Hilton Larson, William Louise Grecco
JTRP Technical Reports
No abstract provided.
An Analysis Of Traffic Accidents On A High-Volume Highway: Technical Paper, Arvid O. Peterson, Harold L. Michael
An Analysis Of Traffic Accidents On A High-Volume Highway: Technical Paper, Arvid O. Peterson, Harold L. Michael
JTRP Technical Reports
No abstract provided.
Measurement Of The Dynamic Tire Forces Of A Large Truck, Gary Willard Kibbee
Measurement Of The Dynamic Tire Forces Of A Large Truck, Gary Willard Kibbee
JTRP Technical Reports
No abstract provided.
An Experimental Analysis Of Transient Vehicle Loads And Response Of Flexible Pavements, John Leonard Sanborn
An Experimental Analysis Of Transient Vehicle Loads And Response Of Flexible Pavements, John Leonard Sanborn
JTRP Technical Reports
No abstract provided.
Airphoto Interpretation Of Engineering Soils Of Interstate Route I-64 Between Scalesville And New Albany In Warrick, Spencer, Dubois, Perry, Crawford, Harrison And Floyd Counties, Indiana : Progress Report, P. T. Yeh
JTRP Technical Reports
No abstract provided.
Aluminum Pipe Culverts, R. H. Brown
Formulation Of A Technique For Evaluating Urban Highway Needs, Ronald G. Rude
Formulation Of A Technique For Evaluating Urban Highway Needs, Ronald G. Rude
JTRP Technical Reports
No abstract provided.
Optimization Model For Maintenance Of Traffic Signals, Thorold G. Smith
Optimization Model For Maintenance Of Traffic Signals, Thorold G. Smith
JTRP Technical Reports
No abstract provided.
A Synthesis Of Urban Travel Patterns In Metropolitan Lafayette, Indiana, Stephen W. Ricks
A Synthesis Of Urban Travel Patterns In Metropolitan Lafayette, Indiana, Stephen W. Ricks
JTRP Technical Reports
No abstract provided.
Evaluation Of Safety At Railroad Highway Grade Crossings, Thomas Gordon Schultz
Evaluation Of Safety At Railroad Highway Grade Crossings, Thomas Gordon Schultz
JTRP Technical Reports
No abstract provided.
An Analysis Of Travel Conditions On The U.S. 52 Bypass In Lafayette, Indiana, Theodore B. Treadway, Joseph C. Oppenlander
An Analysis Of Travel Conditions On The U.S. 52 Bypass In Lafayette, Indiana, Theodore B. Treadway, Joseph C. Oppenlander
JTRP Technical Reports
No abstract provided.
Finite Difference Solution For Triangular Plates, Hao-Yang Huang
Finite Difference Solution For Triangular Plates, Hao-Yang Huang
Masters Theses
"In this thesis the finite difference method is used to solve triangular plates with uniformly distributed transverse load. As a matter of convenience triangular coordinates are used. The supporting conditions as well as the shape of plate are varied. All calculations are performed by digital computer. The patterns of differential operators in triangular coordinates, the deflections of plates, and the moment distributions are shown and discussed. The results obtained for some special cases are compared with published solutions"--Abstract, page i.
The Effect Of Epoxy Resins On The Plasticity Index Of An A-6 Soil, A. R. Van Steenbergen
The Effect Of Epoxy Resins On The Plasticity Index Of An A-6 Soil, A. R. Van Steenbergen
Masters Theses
"This thesis reports the results of an investigation of the variation in plasticity of a clayey soil after treatment with small quantities of epoxy resin and curing agent or with curing agent alone. The series of samples tested consisted of an A-6 soil obtained from the vicinity of Rolla, Missouri, combined with: 1. 0-3% of triethylenetetramine hereafter referred to as TETA. 2. 0-3% of diethylenetriamine hereafter referred to as DETA. 3. 0-3% of Araldite 6010 resin cured with TETA. The TETA content was varied form 20% to 100% of the resin by weight. 4. 0-3% Araldite 6010 resin cured with …
Analysis Of Continuous Folded Plate Roofs, Yung-Ping Wang
Analysis Of Continuous Folded Plate Roofs, Yung-Ping Wang
Masters Theses
"This work presents an analysis of continuous folded plate roofs considering the effects of relative joint displacements. For this analysis the normal modes of the lateral beam vibration were used as the form of the deflection curve and the loading was sinusoidal. By using symmetry and anti-symmetry, a possible method of analyzing prismatic folded plate roofs comprising one bay transversely but continuous over two or more spans longitudinally is suggested"--Abstract, page ii.
Model Study Of A Folded Plate Roof, Graham G. Sutherland
Model Study Of A Folded Plate Roof, Graham G. Sutherland
Masters Theses
"The purpose of this study was to conduct a model study of a folded plate roof in order to determine the feasability [sic] of using model studies as a method of design. Dimensional analysis was used to derive prediction equations for determining the stresses in two prototype structures, when the stresses in the model were known. One model and two prototype folded plate roofs were constructed of plexiglas [sic]. SR-4 strain gages were attached to the structures and strain readings taken as a uniform vertical load was applied in increments. From the strains the stresses at various points in the …
Infinite Beams On An Elastic Foundation, Shi-Peing Chang
Infinite Beams On An Elastic Foundation, Shi-Peing Chang
Masters Theses
"In this paper a partial differential equation for the analysis of beams resting on an elastic foundation under dynamic load is presented. A solution for this equation is derived, and solutions for various boundary conditions of infinite beams resting on an elastic foundation are discussed. The application of the equation is demonstrated by an example of a moving load traveling along an infinite beam"--Abstract, page ii.
Field Permeability Determination Of Partially Saturated Fine Grained Soil, Edward G. Rapp
Field Permeability Determination Of Partially Saturated Fine Grained Soil, Edward G. Rapp
Masters Theses
"The determination of water permeability through a soil is necessary to estimate seepage losses from small reservoirs. At the present time, the methods available to conduct this determination in partially saturated fine grained soils are expensive and in most cases not commensurate with the cost or importance of the individual structure. This investigation was conducted to evaluate the use of a proposed, potentially inexpensive field procedure in this situation. A modified borehole apparatus was utilized in field tests to determine the permeability of a partially saturated soil deposit in place. Undisturbed samples from the same location were tested in the …
Epoxy Resin Admixture For Concrete, Kuo-Chu Hu
Epoxy Resin Admixture For Concrete, Kuo-Chu Hu
Masters Theses
"This thesis describes laboratory tests on concrete having epoxy as an admixture. Cylinders for compression and elastic modulus tests were cured under two different curing conditions, standard laboratory cure and a simulated job cure. Beams cured under laboratory conditions were tested for flexural strength. Test results show the compressive strength increases with an increase of epoxy content for job curing conditions. However, compressive and flexural strengths of specimens cured under laboratory conditions show a slight decrease. The elastic modulus of concrete containing epoxy also decreases in comparison to ordinary concrete"--Abstract, page ii.
The Prediction Of Mix Design Properties For Dense Graded Bituminous Mixtures, Robert Ernest Weeks
The Prediction Of Mix Design Properties For Dense Graded Bituminous Mixtures, Robert Ernest Weeks
Masters Theses
"The purpose of this investigation was to ascertain the feasibility of interpolating values of the physical properties of a dense graded bituminous mix between known values. Also the effects of limestone mineral filler on the properties of a dense graded mix are evaluated. The variables in this study were mineral filler and asphalt cement. Control mixes were established at 2, 6 and 10 percent mineral filler and experimental mixes were prepared at 4 and 8 percent filler. The aggregate consisted of limestone and was mixed with an asphalt cement of 85-100 grade penetration. Al mixes were tested by the Marshall …
Effect Of Single Stirrups On Reinforced Concrete Beams, Vinodbhai T. Patel
Effect Of Single Stirrups On Reinforced Concrete Beams, Vinodbhai T. Patel
Masters Theses
"This study was made to determine the location of vertical stirrups and also to determine the amount of stirrup-steel required to prevent diagonal cracking. The study is limited to rectangular, simply supported, reinforced concrete beams subjected to a concentrated point load at the center of the span. Five sets, each containing three beams were tested. Two sets were cast without stirrups and the results were used to locate the stirrups for the remaining tests. The other three sets were cast with one stirrup on either side of the central load. Stirrups were of the "U" type and formed form No. …
Discharge Characteristics Of Side Weirs, Edgar Snowden
Discharge Characteristics Of Side Weirs, Edgar Snowden
Masters Theses
"The purpose of this study is to investigate the division of flow of water in a flume of rectangular cross-section when the flume is provided with a side weir. An equation has been derived so that the quantity of water flowing over the side weir compared to the quantity of water flowing in the main channel can be predicted. This ratio is acceptable only within the ranges of heads, velocities, and weir lengths imposed by the geometry of the system tested"--Abstract, page ii.
The Effect Of Nickel On Activated Sludge, James Robert Matthews
The Effect Of Nickel On Activated Sludge, James Robert Matthews
Masters Theses
"The primary objective of this investigation was to determine the effect of nickel on activated sludge over a comprehensive range of concentrations and to evaluate the ability of the sludge to acclimate and become more tolerant to the metal. Six one-liter fill and draw activated sludge units were fed domestic sewage; five of these units also received constant, increasing, and shock doses of nickel while the sixth was maintained as a control. Treatment efficiency was evaluated in terms of the chemical oxygen demand, suspended solids, and nickel content of the effluent. A Warburg respirometer was also employed and was operated …