Engineering Commons^™

Investigation Of Oxidized Carbon Supported Au Catalysts Synthesized Via Strong Electrostatic Adsorption Of Au(En)2Cl3 For The Hydrochlorination Of Acetylene To Vinyl Chloride Monomer, Sean Reginald Noble

Theses and Dissertations

Over 20 million tons of vinyl chloride monomer (VCM) is produced every year using acetylene hydrochlorination using a supported mercuric chloride catalyst. During this process mercury is reduced and sublimes into the environment harming all living animals and humans, so carbon-supported Au catalysts have been developed in attempts to replace it. Various techniques have been used to make these catalysts including several variations of dry impregnation. In this study we investigate the ability of Strong Electrostatic Adsorption (SEA) of Au(en)₂Cl₃ onto various supports to demonstrate the ability to rationally and consistently synthesize gold catalysts with ultra-small particle …

Solid Materials Discovery For Thin Films, Oxide Catalysts, And Polymer Sealants, Benjamin Ruiz-Yi

Theses and Dissertations

Solid materials are made up of multiple classes, including metals, ceramics, and polymers. While each class can be developed for general purpose applications or highly specialized, discovery of new materials in order to improve upon desired properties is a non-trivial task for any type of material. A wide variety of materials encompass expansive design spaces, consisting of parameters such as chemical compositions, synthesis conditions, and post-processing. Due to this, narrowing down the design space to fit within a given figure-of-merit and economic viability becomes time consuming at best and infeasible at worst. High-throughput experimentation

High-throughput experimentation (HTE) is a methodology …

Engineering Dopant Position In Structure-Controlled Ceo2-Zro2 Catalysts, Behnam Safavinia

LSU Master's Theses

CeO₂-ZrO₂ (CZO) nanoparticles (NPs) have application in many catalytic reactions, such as methane reformation, due to their oxygen cycling ability. Ni doping has been shown to improve the catalytic activity and acts as an active site for the decomposition of methane. In this work, Ni:CZO NPs were synthesized via a two-step co-precipitation/molten salt synthesis to compare Ni distribution, oxygen vacancy concentration, and catalytic activity relative to a reference state-of-the-art catalyst. To better understand the effects of Ni position and dispersion, and oxygen vacancy formation in these materials, the Ni concentration, reaction time, and deposition methods were varied. …

Engineered Nanoparticles For Site-Specific Bioorthogonal Catalysis: Imaging And Therapy, Riddha Das

Doctoral Dissertations

Bioorthogonal catalysis offers a strategy for chemical transformations complementary to bioprocesses and has proven to be a powerful tool in biochemistry and medical sciences. Transition metal catalysts (TMCs) have emerged as a powerful tool to execute selective chemical transformations, however, lack of biocompatibility and stability limits their use in biological applications. Incorporation of TMCs into nanoparticle monolayers provides a versatile strategy for the generation of bioorthogonal nanocatalysts known as “nanozymes”. We have fabricated a family of nanozymes using gold nanoparticles (AuNPs) as scaffolds featuring diverse chemical functional groups for controlled localization of nanozymes in biological environments, providing unique strategies for …

Nanostructured Metal Thin Films As Components Of Composite Membranes For Separations And Catalysis, Michael J. Detisch

Theses and Dissertations--Chemical and Materials Engineering

Novel metallic thin film composite membranes are synthesized and evaluated in this work for improved separations and catalysis capabilities. Advances in technology that allow for improved membrane performance in solvent separations are desirable for low molecular weight organic separation applications such as those in pharmaceutical industries. Additionally, the introduction of catalytic materials into membrane systems allow for optimization of complex processes in a single step. By adding a nanostructured metallic thin film to its surface, a polymer membrane may be modified to exhibit these improved properties. Using magnetron sputtering, thin metal films may be deposited on commercially available membranes to …

Catalytic Transfer Hydrogenation Reactions Of Lipids, Alexander Asiedu

Civil & Environmental Engineering Theses & Dissertations

Catalytic transfer hydrogenation (CTH) of lipids was investigated using 2-propanol as hydrogen donor for producing liquid hydrocarbons, e.g. jet fuels. The main sources of lipids selected in this study were waste cooking oil (WCO) and oil-laden algae-derived biofuel intermediate (BI). Two different catalysts were employed in this study, namely activated carbon and trimetallic-doped zeolite.

The CTH reaction was between WCO and 2-propanol in a continuous flow reactor over a packed-bed activated carbon at near atmospheric pressure. Results revealed a high level of alkenes and aromatics compounds, which are not stable and are not environmentally unfriendly. To reduce these compounds in …

A Study Of Protein And Peptide-Directed Nanoparticle Synthesis For Catalytic Materials, Abdollah Mosleh

Graduate Theses and Dissertations

Nanoparticles have received much attentions due to their unique properties that makes them suitable candidates for a broad range of applications. As the size of particles decreases, their surface area-to-volume ratio would increase which is the main cause of much attention. In addition to the size, their morphologies and compositions may also play important roles for defining unique properties. Nanoparticle synthesis include both bottom-up and top-down strategies. To control the process of inorganic nanoparticles synthesis one could follow the bottom-up approach to have atom-level control over their compositions, morphologies, phases, and sizes which is the subject of this work. Due …

Development Of A Ws2 Catalyst For Hydrogen Evolution And Improvement Via Platinum Nanoparticle Decoration, Alexander O'Brien

Chemical Engineering Undergraduate Honors Theses

In response to a growing global need to improve utilization of green energy, the concept of renewable energy storage via electrolytic hydrogen production has gained popularity in recent years. However, the prohibitive expense of the bulk platinum catalysts currently used for the hydrogen evolution reaction prevents such a concept from being widely adoptable. This research focuses on a possible alternative catalyst, nanolayer WS₂, which is capable of promoting the hydrogen evolution reaction while maintaining economic viability. Bulk WS₂ was prepared in semiconducting, nanolayer form through liquid phase exfoliation. Prepared catalyst inks consisting of this material demonstrated successful …

Elucidation Of The Catalytic Partial Oxidation Of Methane Utilizing The One-Of-A-Kind Catalytic Shock Tube Technique, Robyn E. Smith

Dissertations and Theses

The mechanism for the catalytic partial oxidation of methane has been debated in scientific literature for over 20 years. This is a seemingly simple reaction producing CO, CO₂, H₂ and H₂O through either partial oxidation followed by complete oxidation or complete oxidation followed by reforming steps. What is happening when the reaction is allowed to occur in an environment absent of transport limitations, absent of temperature gradients and temperature changes, absent of boundary layers must be understood and, until now, has yet to be achieved in one experimental technique.

A novel method using a one …

Computational Modeling Of The Structure And Catalytic Behavior Of Graphene-Supported Pt And Ptru Nanoparticles, Raymond Gasper

Doctoral Dissertations

Computer modeling has the potential to revolutionize the search for new catalysts for specific applications primarily via high-throughput methodologies that allow researchers to scan through thousands or millions of potential catalysts in search of an optimal candidate. To date, the bulk of the literature on computational studies of heterogeneous catalysis has focused on idealized systems with near-perfect crystalline surfaces that are representative of macroscopic catalysts. Advancing the frontier to nanoscale catalysis, in particular, heterogeneous catalysis on nanoclusters, requires consideration of low-symmetry nanoparticles with realistic structures including the attendant complexity arising from under-coordination of catalyst atoms and dynamic fluxionality of clusters. …

First-Principles Study On The Catalytic Role Of Cerium Dioxide In The Conversion Of Organic Compounds, Chuanlin Zhao

LSU Doctoral Dissertations

Ceria is an earth-abundant material that has been widely used in heterogeneous catalysis, environmental catalysis, and energy applications thanks for its ability to readily convert between different oxidation states. The objective of this study is to theoretically elucidate the reaction mechanisms for the conversion of model organic compounds on ceria, in order to gain insights for the design of cost-effective and selective ceria-based catalysts. Acetaldehyde, acetic acid, and para-nitrophenyl phosphate monoester were selected as the model compounds to probe ceria surfaces. Density functional theory calculations can provide accurate predictions of adsorption and reaction energetics, which can be used to …

Spectro-Electrochemical Platforms For Dynamic Analyses Of Catalytic Cascade Systems, Nalin I. Andersen

Nanoscience and Microsystems ETDs

The development of spectro-electrochemical platforms that facilitate the dynamic analyses of complex catalytic cascade systems was explored in this research. These systems facilitated multiple modalities of catalysts and were used as platforms for monitoring catalytic transformations quasi-in situ. The analytical platforms allowed for the characterization of intermediates and products using surface-enhanced Raman spectroscopy (SERS). The design and fabrication of these devices proved to be reproducible, made of materials that can be manipulated for multiple applications, and incorporate fluid mechanics, electrochemistry, and multimodal catalysis. Microfluidic technology offers capabilities for understanding catalytic cascade systems by providing precise dynamic control of …

Engineering Zeolite Catalysts Through Porosity And Surface Acidity Control For Selective Production Of Light Olefins, Xin Li

Doctoral Dissertations

"Zeolites are broadly used as heterogeneous catalysts in various chemical and petrochemical industries to produce value-added chemicals and fuels, mainly due to their large surface area, acid-base properties, high thermal stability, and excellent shape-selectivity. In this dissertation, various zeolite catalysts were engineered through fine-tuning micro-meso-macro-porosity and surface acidity. The engineered zeolites were used as heterogeneous catalysts for production of light olefins such as ethylene and propylene through alcohol dehydration and hydrocarbon cracking reactions.

To control the zeolite porosity and acidity, SAPO-34@ZSM-5 and SAPO-34@Silicalite-1 composites with core-shell structure were synthesized and evaluated in ethanol dehydration reaction. Analysis of catalytic performance revealed …

Atomic Layer Deposition Prepared Nanostructured Materials For Various Catalytic Reactions, Xiaofeng Wang

Doctoral Dissertations

"Atomic layer deposition (ALD) has been widely used for thin film coating and metal nanoparticles (NPs) preparation. In this report, the applications of ALD prepared nanostructured materials in catalysis were examined.

Highly dispersed Pt monometallic catalysts with different substrates and multi-walled carbon nanotubes (MWCNTs) supported Pt-Co bimetallic catalysts were synthesized by ALD for selective hydrogenation of α, β-unsaturated aldehydes to unsaturated alcohols (UA). Pt/MWCNTs showed the highest selectivity of UA in selective hydrogenation of citral, as compared to Pt/SiO₂, Pt/ALD-Al₂O₃, and Pt/γ-Al₂O₃. After adding Co, the highest selectivity was achieved …

Hydrothermal Decarboxylation Of Fatty Acids And Their Derivatives For Liquid Transportation Fuels, Md Zakir Hossain

Electronic Thesis and Dissertation Repository

Due to the depletion of fossil fuel reserves, renewable resources are required to produce tomorrow’s fuel range hydrocarbons. This thesis focuses on the hydrothermal decarboxylation of fatty acids and their derivatives derived from renewable sources. These are required for liquid transportation fuels which have similar properties to conventional fuels. Detailed catalytic studies were performed for the decarboxylation of oleic acid as a model compound and corn distiller’s oil (CDO) as a real feedstock. Commercial activated carbon and laboratory prepared Ni-Al₂O₃, MgO-Al₂O₃, Mo-Al₂O₃ catalysts were also examined as catalysts. Fatty …

Creating Renewable Tunable Polymers From Hydroxymethylfurfural, Meredith C. Allen

Electronic Theses and Dissertations

The research here deals with the conversion of 5-hydroxymethylfurfural (HMF) into a tunable polymer. HMF is a known derivative that can be acquired from biomass via hydrolysis of cellulose followed by isomerization and finally selective dehydration. The process considered here is being developed to create tunable polymers from HMF and involves several different steps, three of which are covered here. The first step, an etherification, is the reaction of HMF with an alcohol. This step is significant because in this step the R-group from the alcohol is added to HMF and the branching portion formed is carried over to the …

Nanoporous Solid Acid Materials For Biomass Conversion Into Value-Added Chemicals: Synthesis, Catalysis, And Chemistry, Hong Je Cho

Doctoral Dissertations

Growing environmental concerns associated with diminishing reserves of fossil fuels has led to accelerated research efforts towards the discovery of new catalytic processes for converting renewable lignocellulosic biomass into value-added chemicals. For this conversion, nanoporous solid acid materials have been widely used because of their excellent hydrothermal stability and molecular sieving capability. In the thesis, hierarchical Lewis acid zeolites with ordered mesoporosity and MFI topology (three dimensionally ordered mesoporous imprinted (3DOm-i) Sn-MFI) were successfully synthesized within the confined space of three dimensionally ordered mesoporous (3DOm) carbon by a seeded growth method. The obtained 3DOm-i Sn-MFI showed at least 3 times …

A Study Of Iron-Nitrogen-Carbon Fuel Cell Catalysts: Chemistry – Nanostructure – Performance, Michael J. Workman

Nanoscience and Microsystems ETDs

Fuel cells have the potential to be a pollution-free, low-cost, and energy efficient alternative to the internal combustion engine for transportation and small-scale stationary power applications. The current state of fuel cell technology has already achieved two of these three lofty goals. The remaining barrier to wide-scale deployment is the high cost, which is primarily caused by dependence on large amounts of platinum to catalyze the energy conversion reactions. To overcome this barrier and facilitate the integration of fuel cells into mainstream applications, research into a new class of catalyst materials that do not require platinum is needed.

There has …

Fundamental Investigation Of The Electrocatalytic Activity Of Layered Mixed Metal Oxides For Low Temperature Oxygen Electrocatalysis, Ayad M. Nacy

Wayne State University Dissertations

Li–O2 (Li–air) batteries are among the most promising energy storage technologies due to their high theoretical specific capacity and energy density. Key challenges with this technology include high overpotential losses associated with catalyzing the electrochemical reactions (i.e., oxygen reduction and evolution reactions) at the cathode of the battery. One way to address this challenge is to incorporate an active electrocatalyst, such as first-order Ruddlesden-Popper series of layered oxides. We show that the composition of the A-site in first-order Ruddlesden-Popper series of layered oxides (A2BO4) has a significant effect in the electrochemical activity of Li-O2 cathodes. Among the oxides composed of …

Catalytic Hydrotreatment For The Development Of Renewable Transportation Fuels, Lilu Funkenbusch

Dissertations, Master's Theses and Master's Reports

Biologically-derived feedstocks are a highly desirable source of renewable transportation fuel. They can be grown renewably and can produce fuels similar in composition to conventional fossil fuels. They are also versatile and wide-ranging. Plant oils can produce renewable diesel and wood-based pyrolysis oils can be made into renewable gasoline. Catalytic hydrotreatment can be used to reduce the oxygen content of the oils and increase their viability as a “drop-in” transportation fuel, since they can then easily be blended with existing petroleum-based fuels. However, product distribution depends strongly on feedstock composition and processing parameters, especially temperature and type of catalyst. Current …

Esterification Of Free Fatty Acid By Selected Homogeneous And Solid Acid Catalysts For Biodiesel Production, Mohamed Kaddour

Electronic Thesis and Dissertation Repository

Biodiesel, derived from plant oils and animal fats is an attractive alternative fuel to fossil-based diesel as it is biodegradable, non-toxic, renewable, and has a low emission profile. Industrial production of biodiesel faces major challenges including limited supply of raw material and high cost of feedstock, which accounts for 60-80% of total production cost. Economic feasibility for biodiesel can be improved by using inexpensive raw materials such as waste frying oils and non-edible oils. However, these low quality feedstocks contain significant amounts of free fatty acids (FFA) which reacts with a base to produce soap hindering product separation and reduce …

Applying Bayesian Machine Learning Methods To Theoretical Surface Science, Shane Carr

McKelvey School of Engineering Theses & Dissertations

Machine learning is a rapidly evolving field in computer science with increasingly many applications to other domains. In this thesis, I present a Bayesian machine learning approach to solving a problem in theoretical surface science: calculating the preferred active site on a catalyst surface for a given adsorbate molecule. I formulate the problem as a low-dimensional objective function. I show how the objective function can be approximated into a certain confidence interval using just one iteration of the self-consistent field (SCF) loop in density functional theory (DFT). I then use Bayesian optimization to perform a global search for the solution. …

Interplays Of Co2, Subnanometer Metal Clusters, And Tio2: Implications For Catalysis And Co2 Photoreduction, Chi-Ta Yang

USF Tampa Graduate Theses and Dissertations

This research is motivated by two significant challenges facing the planet: reducing the emission of CO₂ to the atmosphere and production of sustainable fuels by harnessing solar energy. The main objective of this work is the study of promising photocatalysts for CO₂ reduction. DFT modeling of CO₂, subnanometer Ag&Pt clusters, and anatase TiO2 (101) surface is employed to gain fundamental understanding of the catalytic process, followed by validation using a guided experimental endeavor. The binding mechanism of CO₂ on the surface is investigated in detail to gain insights into the catalytic activity and to assist …

The Production Of Biobutanol From Biomass Via A Hybrid Biological/Chemical Process, Thomas Melvin Potts

Graduate Theses and Dissertations

Biobutanol use as a fuel began in the late 19th century. Problems remain in economic viability. A review of the state of the art and need for technical advances is presented.

The technical potential of producing biofuel from a naturally occurring macroalgae was studied. The algae grow in Jamaica Bay, New York City, in contaminated water. The process consisted of mechanical harvesting, drying, grinding, and acid hydrolysis to form an algal sugar solution. Clostridium beijerinckii and C. saccharoperbutylacetonicum were used in an acetone butanol ethanol (ABE) fermentation to make butanol. Fermentation was followed by distillation Butanol concentrations during fermentation reached …

A Metal-Free Approach To Biaryl Compounds: Carbon-Carbon Bond Formation From Diaryliodonium Salts And Aryl Triolborates, Kuruppu Lilanthi Jayatissa

Dissertations and Theses

Biaryl moieties are important structural motifs in many industries, including pharmaceutical, agrochemical, energy and technology. The development of novel and efficient methods to synthesize these carbon-carbon bonds is at the forefront of synthetic methodology. Since Ullmann’s first report of stoichiometric Cu-mediated homo-coupling of aryl halides, there has been a dramatic evolution in transition metal catalyzed biaryl cross-coupling reactions.

Our work focuses on the discovery and development of an unprecedented reagent combination for metal-free cross-coupling. It is hypothesized that direct carbon-carbon bond formation occurs via a triaryl-λ³-iodane and that electrophile/nucleophile pairing is critical for success in the reaction. Proof-of-concept …

The Synthesis Of Solid Supported Palladium Nanoparticles: Effective Catalysts For Batch And Continuous Cross Coupling Reactions, Kendra W. Brinkley

Theses and Dissertations

Catalysis is one of the pillars of the chemical industry. While the use of catalyst is typically recognized in the automobile industry, their impact is more widespread as; catalysts are used in the synthesis of 80% of the US commercial chemicals. Despite the improved selectivity provided by catalyst, process inefficiencies still threaten the sustainability of a number of synthesis methods, especially in the pharmaceutical industry. Recyclable solid supported catalysts offer a unique opportunity to address these inefficiencies. Such systems coupled with continuous synthesis techniques, have the potential to significantly reduce the waste to desired product ratio (E-factor) of the production …

Theoretical Investigation Of The Catalytic, Liquid-Phase Hydrodeoxygenation Of Organic Acids And Esters, Sina Behtash

Theses and Dissertations

With worldwide fossil fuel resources dwindling and greenhouse gas emissions rising, it is urgent to find renewable liquid fuel alternatives from e.g. biomass to meet the world’s growing energy demand. Lipid feedstocks and pyrolysis oils from woody biomass can be utilized for the production of second-generation biofuels via a catalytic hydrodeoxygenation (HDO) process. The conversion of fatty acids and esters plays an important role in the activity and selectivity of these processes. Understanding the HDO reaction mechanism of organic acids and esters on metal surfaces is a prerequisite for the rational design of new HDO catalysts specifically designed for upgrading …

Production Of Sustainable Aromatics From Biorenewable Furans, Christopher Luke Williams

Doctoral Dissertations

Increasing demand for renewable and domestic energy and materials has led to an accelerated research effort in developing biomass-derived fuels and chemicals. The North American shale gas revolution can provide a domestic source for the manufacture of four of the five major products of the world chemical industry: methanol, ethylene, ammonia, and propylene. However this emerging domestic resource lacks a conversion pathway to the fifth major chemical building block; the larger C6 aromatics benzene, toluene, and xylene (BTX). One sustainable feedstock for renewable C6 aromatic chemicals is sugars produced by the saccharification of biopolymers (e.g., cellulose, hemicellulose). The catalytic conversion …

Reduction Of Ketoximes To Amines By Catalytic Transfer Hydrogenation Using Raney Nickel And 2-Propanol As Hydrogen Donor, Katherynne E. Taylor

Honors Theses

Ketoximes successfully underwent hydrogenolysis and hydrogenation under catalytic transfer conditions with Raney Nickel and 2-propanol as a hydrogen donor. Ketoximes were reduced to primary amines when 2% KOH was included in the reaction. In the absence of KOH N-isopropyl-secondary-amines were obtained in good yields.

Mixed Surfactant Systems: Thermodynamics And Applications In Metal Oxide Imprinting, Suvid Joshi

Theses and Dissertations--Chemical and Materials Engineering

In this work we study mixtures of cationic surfactant (CTAB) and sugar based surfactant(s) (octyl beta-D-glucopyranoside (C8G1), dodecyl maltoside (C12G2) and octyl beta-D-xylopyranoside (C8X1)) to understand the non-ideal thermodynamic behavior of the mixtures of cationic and non-ionic surfactants in water and synthesis of imprinted materials. The thermodynamics of micellization, mixing and dilution of these systems are studied using Isothermal Titration Calorimetry (ITC) and the experimental data obtained are modeled with a pseudo-phase separation model with non-ideal mixing described by regular solution theory. It is shown that a model accounting for enthalpy of demicellization and enthalpy of dilution based on McMillan-Mayer …