Engineering Commons^™

Conceptual Parameters Necessary For Modeling Wettability Alteration In An Enhanced Smart Brine-Chalk System, Ahmed Abdulkareem Hussein Albahrani

Masters Theses

"Achieving higher recovery of oil from proven carbonate reserves around the world is not an easy task. One promising new method, especially for carbonate reservoirs, is the use of "Smart Water" technology, which is an injection water with carefully determined, optimal ionic composition and salinity. Recent experiments have shown good recovery results, but the mechanism of wettability alteration by this fluid are still not well understood. The goal of this study is to review the high and optimal salinity and ionic composition literature plus perform dimensional analysis of key variables in order to shed light on the physical and chemical …

Exploring Reservoir Connectivity With Production Data: Two New Methods And A New Technique, Ghazwan Faisal Jasim Al-Khmaysawee

Masters Theses

"This study presents two new, simple methods to explore reservoir connectivity, which has a significant impact on field development strategy. Identifying reservoir connectivity during primary depletion plays an important role in achieving the most cost-effective and highest production possible. It is also very important in future secondary and tertiary oil recovery, particularly when costs dictate a limited number of wells such as those in deepwater environments.

The presented methods are reciprocal-productivity index versus total field material-balance time trend lines and reciprocal-productivity index versus time trend lines. Those two methods are quick, simple, inexpensive, and only need rate and pressure data …

An Investigation Of Plugging And Increasing Oil Recovery In Sandstone Porous Media By Micrometer-Size Particle Gel, Haifeng Ding

Masters Theses

"Micrometer-size particle gel (microgel) has been developed and successfully applied to improve conformance in mature reservoirs. However, quite few researches have been published to address on their effect on oil recovery and rock permeability modification.

This work conducted a series of core flooding experiments to investigate the injectivity, plugging efficiency and improving oil recovery potentials of a couple of microgels synthesized in our lab.

First, this work studied the impact of permeability and crosslinker concentration on PAM type microgel treatment. Results shows that microgel treatment would have a less plugging efficiency in lower permeability rocks, which could be caused by …

Sensitivity Analysis Of Geomechanical Parameters In A Two-Way Coupling Reservoir Simulation, Hector Gabriel Donoso

Masters Theses

"Currently reservoir simulators model geomechanical effects such as compaction, subsidence, fault reactivation, breach of the seal integrity, etc. using only the rock compressibility to change the pore volume. However, rock compressibility as a scalar quantity is unfit to represent the true rock mechanics in the reservoir. In order to accurately represent geomechanical effects in a reservoir simulation, a two-way coupling simulation of the stress analyzer and the reservoir simulator was done. Based on the poroelasticity theory during the production or depletion of the reservoir the porosity and permeability changed due to the stress or pore pressure changes.

A sensitivity analysis …

Impact Of Repeated Cyclic Production Scheme On Eur In Low-Permeability Reservoirs, Samarth Gupte

Masters Theses

"Productivity in low-permeability reservoirs declines quickly compared to conventional reservoirs. These tight reservoirs have very high initial oil production rates but as soon as the oil near the fractured area is recovered, the production declines rapidly making economic oil and gas production a challenge for the industry. This study investigates the impact of repeated shut-in/production cycles on the ultimate recovery of oil in such environments.

A reservoir model with multiple fractured horizontal well having 30 transverse fractures is created using CMG. Reservoir permeability is varied over the range of 0.000001 md to 10 md and shut-in/production cycles of 2-weeks, 1-month, …

Bioresponsive Polymer Coating On Nanoparticles, Tunyaboon Laemthong

Masters Theses

"Nanotechnology incorporated with molecular biology became a promising way to treat cancer. The size of nanoparticles enables them to overcome the side effects noticed in cancer treatment like chemotherapy and surgery. Various types and shapes of nanoparticles have been synthesized and used in drug delivery to tumor sites. However, one of problems of using these nanoparticles is the aggregation after injecting them into human body due to flow rate of bloodstream. The coagulation and aggregation will result in clogging blood vessel and lower therapeutic efficacy.

In this thesis, a solution to the aggregation problem was proposed, which is coating biopolymer …

Study And Development Of Robust Preformed Particle Gels For Conformance Control, Yifu Long

Masters Theses

"To improve the oil recovery of mature reservoirs, technologies referring to conformance control have been widely developed and implemented. Among various technologies, preformed particle gel (PPG) treatment has attracted increasing attentions. PPGs, as a kind of deformable plyometric superabsorbent, could be pumped through injection wells as plugging agents to block the fracture or high-permeability zone in a reservoir.

In decade usage of PPGs, an intensively employed material is poly(acrylamide) (PAM) based hydrogel. However, conventional PAM gel did reveal deficient in formidable conditions, such as formations with high temperature and high salinity. Therefore, a novel PPG based on starch-grafting-poly(acrylamide)/nano-composite (SAC) hydrogel …

Surface Modification Of Tin Oxide Nanoparticles By Atomic Layer Deposition For Enhanced Electrochemical Performance, Sai Abhishek Palaparty

Masters Theses

"Atomic Layer Deposition is a robust technique used to deposit high quality, conformal, and size-tunable ultrathin films on a substrate. This technique can be used to coat protective films on battery anode and cathode materials for enhanced performance. In the case of cathodes, the ultrathin film provides a protective barrier preventing cationic dissolution. In the case of anodes, the film acts as a supporting matrix reducing strain caused by volume expansions. In these study, we use this technique to coat an optimally thick conductive iron oxide film on tin oxide particles to improve its electrochemical performance at high current densities …

Hydrodynamic Of A Co-Current Gas Liquid Upflow In A Moving Packed Bed Reactor With Porous Catalysts, Ali Jabbar Toukan

Masters Theses

"In this study, the hydrodynamic, i.e. flow regime identification, line average liquid holdup, and the internal liquid holdup of a co-current moving packed bed reactor were studied. For the sake of hydrodynamics study, moving bed reactor is investigated as two-phase upflow packed bed reactor. Scaled down configuration was used to simulate of the moving bed reactors utilized in the industrial process. First, line average liquid holdup is measured with different geometrical configurations covering empty, dry, wet, and packed column under flowrates operation conditions. A new methodology has been developed to determine the line average liquid holdup for a porous catalyst. …

Computational Fluid Dynamic Analysis In High Permeability Hydraulic Fractured Horizontal Gas Wells, Hrithu Vasudevan

Masters Theses

"Hydraulic fracturing of horizontal wells in unconventional reservoirs has become the dominant type of well completion performed in the United States. In very low permeability reservoirs (~.00001-.0001 mD), the wellbore is aligned with the minimum horizontal stress, and the completion includes multiple transverse fractures. These fractures may be placed with either open hole sleeve type completion systems (OHMS), or cased hole plug and perf systems (P-n-P). In slightly higher permeability reservoirs (1 to 10 mD) multiple longitudinal fractures have been found to be preferred to completions with transverse fractures.

This study presents an evaluation of gas well productivity for both …

Correlation Anaylsis Of Magnesite Dissolution Rate And Magnesite Spatial Distribution, Yao Wang

Masters Theses

"This thesis presents a correlation analysis of the spatial distribution and permeability of magnesite dissolution and focuses on its overall rate and average porosity. Magnesite dissolution is affected by several aspects.

A reservoir's large spatial distribution can make capturing the magnesite dissolution difficult, so in this study, a variogram was built in Petrel using a percentage variation of magnesite and sand. The variogram also handles different major and minor directions in anisotropy. After building the magnesite model, simulation of magnesite dissolution was achieved in Cruch Flow to get the magnesite dissolution rate and average porosity.

For correlation analysis, a regression …

A Comprehensive Study Of Lost Circulation With Application In The South Rumaila Field, Iraq, Abo Taleb Tuama Al-Hameedi

Masters Theses

“Drilling mud losses and problems associated with lost circulation while drilling account for a major expense in drilling oil and gas wells. By industry estimates, more than 2 billion USD is spent annually to combat and mitigate this problem (Ali et al., 2015).

The South Rumaila field in Iraq is one of the largest oilfields in the world. Wells drilled in this field are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha and Shuaiba formations. Lost circulation events range from seepage losses to complete loss of the borehole and are a critical issue in field development. …

Oxidative Dehydrogenation Of Light Alkanes With Carbon Dioxide, Marktus A. Atanga

Masters Theses

”Most experts studying the global ecosystem and climate suggest that rising anthropogenic CO₂ emissions have contributed to significant global climate change in the last half-century. The development of effective strategies that convert CO₂ into energy, fuels, and chemicals are greatly preferable to oceanic or geologic sequestration options because they offer the potential to create new commercially-viable products from renewable carbon feedstock. On the other hand, the selective oxidative dehydrogenation of light alkanes (C₂-C₄) to corresponding olefins, methane reforming, and methane coupling are the major challenges for producing valuable and versatile feedstocks. The oxidative dehydrogenation …