Engineering Commons^™

Auger Timing Effects On Performance Of A Combine Unloading System, Todd Philip Cole

Open Access Master's Theses (through 2010)

Performance effects were measured on a combine unloading system using three different auger timing settings.Performance measures included maximum startup torque, mean operating torque, standard deviation of the operating torque, flow rate of grain through the system, and mechanical damage to the grain.The performance effects were measured with the system unloading corn and soybeans.

The data were statistically analyzed to check for interactions between the grains and differences between the timings.Using an alpha value of 0.1 it was found that timing 1 for both grains had a 3% (<2.4 L/s) higher flow rate over timings 2 and 3.Timings 1 and 2 for both grains had higher maximum startup torque, about 10% (60 N·m) more torque required than timing 3.In soybeans, timings 2 and 3 also had the smallest standard deviation in operating torque, about 30% (20 N·m) less than timing 1.We were unable to detect any differences in mechanical damage to corn or soybeans as a result of unloading auger timing.These findings suggest that timing 3, with the cross augers lagging 90° behind the vertical unloading auger, may require less maximum startup torque and less variation in torque for the cross augers to effectively fill the loosely filled space left after the vertical auger lifts the grain without extra torque effects of having the augers push against each other as they do in timing 1.

Advisor: Michael F. Kocher

Benchmarking Of Flexibility And Needs 2002: Survey Of Non-Federal Irrigation Districts (California Department Of Water Resources), Stuart W. Styles, Daniel Howes

BioResource and Agricultural Engineering

ITRC interviewed irrigation district personnel from 17 agricultural districts throughout California. Data were analyzed to determine the degree of water delivery flexibility provided to farmers and the extent of existing and planned district modernization. This report did not include irrigation districts with long-term federal contracts.

Mechanical Properties Of Corn And Soybean Meal, Marek Molenda, Michael D. Montross, Jozef Horabik, Ira Joseph Ross

Biosystems and Agricultural Engineering Faculty Publications

Ground corn and soybean meal are common ingredients in feed mixes. The knowledge of their mechanical properties is important to the feed manufacturer and consumer. Changes in these properties can lead to abnormally high or low levels of active ingredients in finished feed, thus decreasing its quality. Mechanical properties of wheat, corn meal, and soybean meal were investigated using a modified direct shear apparatus. The moisture content (wet basis), uncompacted bulk density, and particle density were: 10.4%, 733 kg/m³, and 1410 kg/m³ for soft red winter wheat; 11.4%, 583 kg/m³, and 1350 kg/m³ for …

Assessment Of Concentrated Flow Through Riparian Buffers, Michael G. Dosskey, Matthew J. Helmers, Dean E. Eisenhauer, Thomas G. Franti, Kyle D. Hoagland

Matthew J. Helmers

Concentrated flow of surface runoff from agricultural fields may limit the capability of riparian buffers to remove pollutants. This study was conducted on four farms in southeastern Nebraska to develop a method for assessing the extent of concentrated flow in riparian buffers and for evaluating the impact that it has on sediment-trapping efficiency. Field methods consisted of mapping field runoff areas and their pathways to and through riparian buffers to streams. Mathematical relationships were developed from a model (VFSMOD) that estimates sediment-trapping efficiency from the ratio of buffer area to field runoff area. Among the farms surveyed, riparian buffers averaged …

Validation Of A Finite-Element Stored Grain Ecosystem Model, Michael D. Montross, Dirk E. Maier, Kamyar Haghighi

Biosystems and Agricultural Engineering Faculty Publications

An axisymmetric finite–element model was validated with respect to predicting the heat, mass, and momentum transfer that occurred in upright corrugated–steel storage bins due to conduction, diffusion, and natural convection using realistic boundary conditions. Hourly weather data that included hourly total solar radiation, wind speed, ambient temperature, and relative humidity were used to model the corn temperature and moisture content during storage with no aeration, and with ambient and chilled aeration. Periods of aeration were simulated assuming a uniform airflow rate through the grain mass. Sixteen bins with a capacity of 11.7 t each and instrumented with temperature cables were …

Development Of A Finite-Element Stored Grain Ecosystem Model, Michael D. Montross, Dirk E. Maier, Kamyar Haghighi

Biosystems and Agricultural Engineering Faculty Publications

An axisymmetric finite–element model was developed that predicts the heat, mass, and momentum transfer that occurred in upright corrugated steel storage structures due to conduction, diffusion, and natural convection using realistic boundary conditions. Weather data that included hourly total solar radiation, wind speed, ambient temperature, and relative humidity were used to model the temperature, moisture content, dry matter loss, and maize weevil development during storage with no aeration, and with ambient and chilled aeration. Periods of aeration were simulated assuming a uniform airflow rate through the grain mass. Heat and mass balances were used to calculate the temperature and absolute …

A Mechanical System For Soil Reconstruction, John Patrick Fulton, Larry G. Wells, Timothy D. Smith

Biosystems and Agricultural Engineering Faculty Publications

One of the most perplexing problems associated with reclaiming surface–mined lands is excessive compaction of soil due to the heavy earthmoving equipment used during the reclamation process. Over the years, some innovative material handling schemes have been devised to limit vehicle traffic during reclamation on reconstructed soil. However, final grading operations can often create root–limiting bulk densities, which affect plant growth and yield. The purpose of this article is to describe a mechanism designed at the University of Kentucky whereby mine soil can be reconstructed without introducing compaction caused by surface traffic in order for the soil to sustain desirable …

Water Delivery Service As A Determinant Of Irrigation Project Performance, Stuart W. Styles, M. A. Marino

BioResource and Agricultural Engineering

Performance of an irrigation system is represented by its measured levels of achievement in terms of one or several parameters that are chosen as indicators of the system’s goals. The purpose of this paper is to utilize and refine a set of evaluation indicators that can be used to describe the irrigation performance for sixteen international irrigation projects in less-developed countries. The irrigation performance of many international irrigation projects in less-developed countries has been reported as poor. The cause of the poor irrigation performance has been blamed on technical, financial, managerial, social, and/or institutional causes. This study is specifically designed …

Case Study: Installation Of Canal Control Structures On The Government Highline Canal, Ram Dhan Khalsa, Stuart W. Styles, Charles M. Burt, Bob Norman

BioResource and Agricultural Engineering

The Government Highline Canal Modernization Study was completed in April 2000 to evaluate options for reducing the flow rate requirement of the Government Highline Canal in order to increase the water supply in the “15-Mile Reach” of the Colorado River, thereby helping sustain habitat for fish species identified as endangered. The intent was to develop a design for which Colorado River diversions could be better matched to on-farm demands. It was determined that canal modernization, in the form of automated canal structures, in-system storage, and new operational procedures could significantly reduce operational spill. A systematic evaluation of the existing canal …

Modernizing Irrigational Facilities At Sutter Mutual Water Company: A Case Study, Frederick F. Schantz, Stuart W. Styles, Beau J. Freeman, Charles M. Burt, Doughlas Stevens

BioResource and Agricultural Engineering

In 1999 Sutter Mutual Water Company (SMWC) began an effort to modernize its water-distribution system in an attempt to reduce operation and maintenance costs and conserve water and power resources. The primary technical support was provided by professionals from the Irrigation Training and Research Center (ITRC), California Polytechnic State University (Cal Poly), San Luis Obispo. Additional technical expertise was provided by Concepts in Controls of Visalia, California and Wilson Pumps of Woodland, California. This modernization project was partially funded by the United States Bureau of Reclamation (USBR), Mid-Pacific Region, Northern Area Office, though a Field Services Program Grant and technical …

Glenn-Colusa Irrigation District Flow Monitoring Program, Dennis Perkins, Stuart W. Styles, Marcus Y. Yasutake

BioResource and Agricultural Engineering

In 1996, the United States Bureau of Reclamation (USBR), Mid-Pacific Region, Northern California Area Office began the Willows Flow Monitoring Program. The program objective was to monitor, in near real-time, 85% of the Sacramento River Diversions from Shasta Dam to Sacramento. Several site visits were conducted to the District and their diversion points along the Sacramento River by USBR and Irrigation Training and Research Center (ITRC) staff from California Polytechnic state University (Cal Poly), San Luis Obispo. One of the sites identified for flow monitoring was the Glen-Colusa Irrigation District (GCID) canal at the Stoney Creek Siphon. At question was …

Electric Load Shifting In Irrigation Districts - California's Program, Charles M. Burt, Ricardo Amón, Darren Cordova

BioResource and Agricultural Engineering

During the 2000-2001 winter, California experienced a severe imbalance in electricity supply and demand that resulted in blackouts and brownouts. The state legislature initiated a number of emergency programs, one of which (Senate Bill 5x) was targeted for irrigation districts. The primary goal of SB 5x is to reduce peak period electricity demand. The California Energy Commission (CEC), acting under authority of Section 5(b) of the legislation, developed the "Agricultural Peak Load Reduction Program". The program was announced on June 1, 2001, and Cal Poly ITRC administers the irrigation district portion of the program for CEC. During the first 9 …

Advances In Plc-Based Canal Automation, Charles M. Burt, Xianshu Piao

BioResource and Agricultural Engineering

A short history of canal automation is given. PLC-based canal automation is relatively new. Advances in PLC-based canal automation are listed. Also listed are some of the remaining challenges. Recent advances have been made in understanding unsteady flow simulation procedures, the form of the control algorithms used, the tuning procedures for these control algorithms, and the field programming of the algorithms into PLCs. The experiences of the Cal Poly Irrigation Training and Research Center (ITRC) in automating a variety of canals with upstream and downstream control are given.

Breaking The Technology Barriers Imposed By Cast-In Place Concrete Pipe In Irrigation Districts: Case Study Of South San Joaquin Irrigation District, Charles M. Burt, Michael B. Gilton, Kevin Johnson, Keith Crowe

BioResource and Agricultural Engineering

South San Joaquin Irrigation District (SSJID) in Manteca, California, is beginning an ambitious modernization program to increase its water delivery flexibility. The district has over 200 miles of 30-60 inch cast-in-place (CIP) concrete pipeline that currently allow for little flexibility. SSJID will install four reinforced concrete interceptor pipelines and regulating reservoirs to redistribute water among the CIP pipelines and provide improved flexibility. The district's goal is to improve efficiency and encourage farmers with pressurized irrigation systems to shift from well water to surface water.

Closure To "Flap Gate Design For Automatic Upstream Canal Water Level Control", Charles M. Burt, Russdon Angold, Mike Lehmkuhl, Stuart Styles

BioResource and Agricultural Engineering

No abstract provided.

Hyperspectral Imagery For Various Crop Growth Information Extraction, Haibo Yao, Lei Tian, Marvin Paulsen, Amy L. Kaleita, Mukti Singh

Amy L. Kaleita

Aerial hyperspectral imagery has potential for agriculture applications. The objective of this study is to identify significant wavelength ranges (image bands or band combinations) from hyperspectral imagery for different field information extraction. The field information include corn nitrogen content, plant population, yield, and grain quality such as oil, protein, and extractable starch. All the images were processed using the GA-SPCA (Genetic Algorithm based Selective Principal Component Analysis) method . T he GA-SPCA method can filter out significant image bands and reduce the image data dimension to only one principle component image through a cascade two-step dimension reduction process. It was …

Remote Sensing Of Site-Specific Soil Characteristics For Precision Farming, Amy L. Kaleita, Lei F. Tian

Amy L. Kaleita

A methodology for assessing distributed surface soil moisture content from optical remote sensing is developed. This study uses both ground-based and remotely sensed spectral measurements of soil reflectance in visible and near-infrared wavelengths and concurrent measurements of volumetric soil moisture within the top 6 cm to establish a relationship between spectral response and moisture. Various approaches, including principal component analyses and regression techniques are investigated to determine the potential for quantifying soil moisture from the spectral reflection data. Preliminary investigations have yielded R 2 values as high as 0.62 when comparing predictions to actual moisture values. Investigation of predicting soil …

Remote Sensing Of Site-Specific Soil Characteristics For Precision Farming, Amy L. Kaleita, Lei Tian

Amy L. Kaleita

A methodology for assessing distributed surface soil moisture content from optical remote sensing is developed. This study uses both ground-based and remotely sensed spectral measurements of soil reflectance in visible and near-infrared wavelengths and concurrent measurements of volumetric soil moisture within the top 6 cm to establish a relationship between spectral response and moisture. Various approaches, including principal component analyses and regression techniques are investigated to determine the potential for quantifying soil moisture from the spectral reflection data. Preliminary investigations have yielded R 2 values as high as 0.62 when comparing predictions to actual moisture values. Investigation of predicting soil …

Screening For Volatile Fatty Acids In Agricultural Air Using Solid Phase Microextraction And Gas Chromatography – Mass Spectrometry, Jarett P. Spinhirne, Jacek A. Koziel, David B. Parker, Darren L. Williams, N. Andy Cole, John M. Sweeten

Jacek A. Koziel

Volatile fatty acids (VFAs) are a major component of odorous gases associated with agricultural sources. Because of typically low VFA air concentrations, conventional air sampling methods including sorbent tubes and vacuum canisters are often not sensitive enough to detect them. Solid phase microextraction (SPME) was used in this research because it is very sensitive, reusable, fast, and combines sampling and sample preparation, allowing for rapid detection of low concentrations of organics in air. This research focused on 7 VFAs: acetic, propionic, isobutyric, butyric, isovaleric, valeric, and hexanoic acids. Field experiments were conducted to test this method for air sampling of …

Noninvasive Sampling And Analysis Of Bovine Breath Using Solid-Phase Microextraction And Gas Chromatography-Mass Spectrometry: A Feasibility Study, Jacek A. Koziel, Jarett P. Spinhirne, Norbert K. Chirase

Jacek A. Koziel

An experiment was conducted to examine the feasibility of detecting unique volatile organic biomarkers exhaled by healthy and morbid heifer calves on-site using noninvasive sampling with solid phase microextraction (SPME) and analysis with gas chromatography-mass spectrometry (GC-MS). Two heifers were selected on the bases of health status and were sampled from 5 to 15 min with a special facemask sampling system using DVB/Carboxen/PDMS 50/30 µ m and PDMS 100 µ m SPME fibers. The samples were sealed and transported to the laboratory and analyzed with ion trap GC-MS. Acetone, methyl ethyl ketone, toluene, pentadecane, and nonanal were detected in cattle …

Hyperspectral Imagery For Various Crop Growth Information Extraction, Haibo Yao, Lei Tian, Marvin Paulsen, Amy Kaleita, Mukti Singh

Amy L. Kaleita

Aerial hyperspectral imagery has potential for agriculture applications. The objective of this study is to identify significant wavelength ranges (image bands or band combinations) from hyperspectral imagery for different field information extraction. The field information include corn nitrogen content, plant population, yield, and grain quality such as oil, protein, and extractable starch. All the images were processed using the GA-SPCA (Genetic Algorithm based Selective Principal Component Analysis) method . T he GA-SPCA method can filter out significant image bands and reduce the image data dimension to only one principle component image through a cascade two-step dimension reduction process. It was …

An Overland Flow Sampler For Use In Vegetative Filters, D. Eisenhauer, Matthew J. Helmers, J. Brothers, M. Dosskey, T. Franti, A. Boldt, B. Strahm

Matthew J. Helmers

Vegetative filters (VF) are used to remove contaminants from agricultural runoff and improve surface water quality. State and federal cost-share funds are available to encourage landowners to install VF. The USDA-National Conservation Buffer Initiative calls for 3.2 million km of buffers to be installed by the year 2002. Numerous experimental plot and modeling studies have quantified the removal of sediments and other non-point source (NPS) contaminants from agricultural runoff by VF. Almost all of these studies have been conducted under controlled settings, including artificial sheet flow conditions, and using expensive, labor-intensive measurement systems. There is a critical need for simple, …

Modeling Vegetative Filter Performance With Vfsmod, Matthew J. Helmers, Dean E. Eisenhauer, Michael G. Dosskey, Thomas G. Franti

Matthew J. Helmers

The model VFSMOD was used to investigate the effect of varying watershed characteristics and buffer dimensions on the sediment trapping efficiency of vegetative filters. This investigation allows for a better understanding of how watershed characteristics, buffer dimensions, and storm characteristics impact the performance of vegetative filters. Using VFSMOD, relationships that estimate sediment trapping efficiency from the ratio of filter area and field area were developed for different sites. These relationships have been applied for field assessment of concentrated flow.

Cattle Handling Facilities: Planning, Components, And Layouts, José R. Bicudo, Samuel G. Mcneill, Larry W. Turner, Roy Burris, John Anderson

Agricultural Engineering Extension Publications

Cattle handling facilities are used to confine cattle safely and efficiently for close observation and to perform routine health and management procedures. Adequate facilities are an essential part of an efficient cattle operation for any producer who wants to improve marketing, cattle health, and production. A well-planned handling facility can help you save money by making easier practices such as preventive health management, pregnancy testing, implanting, controlling parasites, vaccinating, castrating, and dehorning.

A Portable Rainfall Simulator For Plot–Scale Runoff Studies, J. Byron Humphry, Tommy C. Daniel, Dwayne R. Edwards, Andrew N. Sharpley

Biosystems and Agricultural Engineering Faculty Publications

Rainfall simulators have a long history of successful use in both laboratory and field investigations. Many plot–scale simulators, however, have been difficult to operate and transport in the field, especially in remote locations where water or electricity is unavailable. This article describes a new rainfall simulator that is relatively easy to operate and transport to and from the field while maintaining critical intensity, distribution, and energy characteristics of natural rainfall. The simulator frame is constructed from lightweight aluminum pipe with a single 50 WSQ nozzle centered at a height of 3 m (9.8 ft). An operating nozzle pressure of 28 …

Friction Of Wheat: Grain-On-Grain And On Corrugated Steel, Marek Molenda, Jozef Horabik, I. Joe Ross, Michael D. Montross

Biosystems and Agricultural Engineering Faculty Publications

Coefficients of friction of wheat for grain–on–grain and on galvanized corrugated steel sheet were investigated using a modified direct shear apparatus. Tests were conducted under a normal pressure of 20.7 kPa using soft red winter wheat at a moisture content of 11.2% (w.b.) and an uncompressed bulk density of 740 kg/m³. Three consolidation procedures and three methods of deposition of grain in the test chamber were used. Test results of grain–on–grain friction showed that consolidation procedure markedly influenced the force–displacement relationship, while its influence on the coefficients of friction were small. Shearing to peak strength as a consolidation …

A Reduced–Cost Mechanized System For Handling And Curing Mechanically–Harvested Burley Tobacco, Greg A. Camenisch, Larry G. Wells, Timothy D. Smith, George A. Duncan

Biosystems and Agricultural Engineering Faculty Publications

An experimental system was tested in which mechanically harvested burley tobacco plants placed onto steel slotted receivers were retrieved from a field, transported to a field curing structure, and placed onto the structure for air curing by a single worker. The system consisted of a tractor–towed, trailer mechanism that engaged and hoisted loads of approximately 360 burley plants of approximately 1 Mg mass. Ten slotted steel rails, 3.05 m long, holding 36 notched plants were placed onto parallel wooden beams suspended at a height of 2.13 m by wooden posts set in the ground. Burley tobacco was cured in this …

Review Of: Eat Your Genes: How Genetically Modified Food Is Entering Our Diet (Stephen Nottingham Ed.), Natalie Duval

RISK: Health, Safety & Environment (1990-2002)

Review of the book: "Eat Your Genes: How Genetically Modified Food Is Entering Our Diet," by Stephen Nottingham, (St. Martin's Press 1999). Introduction, Glossary, Bibliography, Index. ISBN 1-85649-578-7 [212 pp. $17.95. Softbound, St. Martin's Press, Inc., New York, NY 10010].

Characterization Of Vadose Zone Sediment: Uncontaminated Rcra Borehole Core Samples And Composite Samples, R. J. Serne, B. N. Bjornstad, H. T. Schaef, B. A. Williams, D. C. Lanigan, D. G. Horton, R. E. Clayton, A. V. Mitroshkov, V. L. Legore, M. J. O’Hara, C. F. Brown, K. E. Parker, I. V. Kutnyakov, J. N. Serne, G. V. Last, Steven Smith, C. W. Lindenmeier, John M. Zachara, D. B. Burke

US Department of Energy Publications

The overall goal of the of the Tank Farm Vadose Zone Project, led by CH2M HILL Hanford Group, Inc., is to define risks from past and future single-shell tank farm activities. To meet this goal, CH2M HILL Hanford Group, Inc. asked scientists from Pacific Northwest National Laboratory to perform detailed analyses on vadose zone sediment from within the S-SX Waste Management Area. This report is one in a series of four reports to present the results of these analyses. Specifically, this report contains all the geologic, geochemical, and selected physical characterization data collected on vadose zone sediment recovered from Resource …

Side Mounted Doppler Flow Meter For Canals, Stuart W. Styles

BioResource and Agricultural Engineering

The Irrigation Training and Research Center has undertaken a performance review of advanced electronic flow measurement technologies in irrigation applications. An example is the SonTek Argonaut Side-Looking (SL) Doppler Flow Meter.